From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <52A05ED2.9050003@xenomai.org> Date: Thu, 05 Dec 2013 12:09:06 +0100 From: Gilles Chanteperdrix MIME-Version: 1.0 References: <40A5BE95-8E78-4CD6-81D2-C97AA7A58FBB@open.ac.uk> <529DCF2F.1070702@xenomai.org> <1507DF58-4A8D-42E0-92B8-4A9EAB4289E3@open.ac.uk> <529DDB58.3090709@xenomai.org> <5B55252A-19D2-4A0D-82BE-FC77BFA6AEE1@open.ac.uk> <529DFEC3.1050106@xenomai.org> <90F2A7A6-5B5E-4A25-8D9D-3D50D0EC0826@open.ac.uk> <529E2801.5060505@xenomai.org> <529EEB7C.4090308@xenomai.org> <529EED06.4010108@xenomai.org> <529EF58A.8030003@xenomai.org> <529EF680.1040108@xenomai.org> <529EF89E.6000302@xenomai.org> <529EFB3D.6090900@xenomai.org> <529F03FC.8040409@xenomai.org> <529F04DD.2070201@xenomai.org> <529F0C48.20705@xenomai.org> <529F0DBC.9080905@xenomai.org> <529F13A1.5070403@xenomai.org> <529F1913.4030604@xenomai.org> <529F1974.60900@xenomai.org> <529F2BED.2030403@xenomai.org> <529F5254.8060501@xenomai.org> <529F69AD.6060003@xenomai.org> In-Reply-To: Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai] latency spikes under load List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Kurijn Buys Cc: Xenomai@xenomai.org On 12/05/2013 01:44 AM, Kurijn Buys wrote: > > Op 4-dec.-2013, om 17:43 heeft Philippe Gerum het volgende geschreven: > >> On 12/04/2013 05:03 PM, Gilles Chanteperdrix wrote: >>> On 12/04/2013 02:19 PM, Philippe Gerum wrote: >>>> On 12/04/2013 01:00 PM, Gilles Chanteperdrix wrote: >>>>> Ok, could you push the branch somewhere so that I can try it? >>>>> >>>> >>>> testing/ipipe-3.8-i915-fix >>> >>> I could test it, I no longer get high latencies while moving a large >>> opengl window. So, it looks good. > > I've it running as well (with the priority coupling option disabled this time). The options I asked you to change were meant to eliminate any possible source for high latencies in case of bug. You can return to a normal configuration now: re-enable SMP or APIC if you prefer to remain in single processor mode, disable the I-pipe tracer if you want to avoid the overhead, and re-enable priority coupling if you prefer to use it. -- Gilles.