From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-mpc85xx master
Date: Mon, 3 Feb 2014 09:04:42 -0800 [thread overview]
Message-ID: <52EFCC2A.9030908@freescale.com> (raw)
Tom,
The following changes since commit 07e2822d158940a0e8ba45b6ab0344ffa1011a07:
board: nios2: Check if flash is configured before calling
early_flash_cmd_reset() (2014-01-29 16:44:18 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
for you to fetch changes up to 1b4175d6fa12b8012c119889ad5cc1e65c3cf6ba:
driver/ifc:Change accessor function to take care of endianness (2014-02-03
08:38:51 -0800)
----------------------------------------------------------------
Nikhil Badola (1):
powerpc/usb: Enable dual phy for T1040
Prabhakar Kushwaha (6):
driver/fsl_pci:Update print to display PCIe generation
powerpc/mpc85xx:Fix README to show correct flash memory map
powerpc/mpc85xx: Update serdes protocols for T1040
boards/t1040qds: Adds ethernet support for T1040
powerpc/t104xrdb: Update T1042RDB.h in config folder
driver/ifc:Change accessor function to take care of endianness
Priyanka Jain (2):
powerpc/t104xrdb: Update T1040RDB.h in config folder
powerpc/t104xrdb: Add basic ethernet support
Rainer Boschung (2):
kmp204x: support for QRIO1 bootcounter
kmp204x: I2C deblocking support
Valentin Longchamp (7):
kmp204x: introduce QRIO GPIO functions
kmp204x: implement workaround for A-006559
kmp204x: add support for the kmcoge4 board
kmp204x: update I2C field of RCW
KM: add the KM_UBI_PART_BOOT_OPTS #define
kmp204x: enable support for SPANSION SPI NOR
kmp204x: initial support for PCIe FPGA configuration
poonam aggrwal (1):
powerpc/mpc85xx: Update LIODNs for T1040
README | 6 +
arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 2 +
arch/powerpc/cpu/mpc85xx/t1040_ids.c | 36 --
arch/powerpc/cpu/mpc85xx/t1040_serdes.c | 63 ++-
arch/powerpc/include/asm/config_mpc85xx.h | 6 +-
arch/powerpc/include/asm/fsl_serdes.h | 8 +-
arch/powerpc/include/asm/immap_85xx.h | 11 +
board/freescale/t1040qds/Makefile | 1 +
board/freescale/t1040qds/README | 6 +-
board/freescale/t1040qds/eth.c | 492 ++++++++++++++++++++++++
board/freescale/t1040qds/t1040qds.c | 1 +
board/freescale/t104xrdb/Makefile | 1 +
board/freescale/t104xrdb/README | 6 +-
board/freescale/t104xrdb/eth.c | 72 ++++
board/keymile/kmp204x/Makefile | 2 +-
board/keymile/kmp204x/kmp204x.c | 128 +++---
board/keymile/kmp204x/kmp204x.h | 10 +
board/keymile/kmp204x/pbi.cfg | 10 +
board/keymile/kmp204x/pci.c | 85 ++++
board/keymile/kmp204x/qrio.c | 146 +++++++
board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +-
boards.cfg | 1 +
doc/README.b4860qds | 4 +-
drivers/mtd/nand/fsl_ifc_nand.c | 243 ++++++------
drivers/mtd/nand/fsl_ifc_spl.c | 60 +--
drivers/net/fm/t1040.c | 56 +++
drivers/pci/fsl_pci_init.c | 4 +-
include/configs/T1040QDS.h | 5 +-
include/configs/T1040RDB.h | 24 +-
include/configs/T1042RDB_PI.h | 20 +-
include/configs/km/keymile-common.h | 10 +-
include/configs/km/kmp204x-common.h | 21 +-
include/configs/kmp204x.h | 7 +-
include/fsl_ifc.h | 42 +-
34 files changed, 1230 insertions(+), 361 deletions(-)
create mode 100644 board/freescale/t1040qds/eth.c
create mode 100644 board/freescale/t104xrdb/eth.c
create mode 100644 board/keymile/kmp204x/qrio.c
Thanks,
York
next reply other threads:[~2014-02-03 17:04 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-03 17:04 York Sun [this message]
2014-02-04 22:05 ` [U-Boot] Please pull u-boot-mpc85xx master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-01-24 16:25 York Sun
2019-01-25 15:16 ` Tom Rini
2018-10-30 19:21 York Sun
2018-10-31 14:44 ` Tom Rini
2018-09-28 15:35 York Sun
2018-09-30 2:27 ` Tom Rini
2018-07-31 17:25 York Sun
2018-08-01 15:05 ` Tom Rini
2018-07-31 17:12 York Sun
2018-07-31 17:16 ` York Sun
2017-12-08 16:59 York Sun
2017-12-09 1:35 ` Tom Rini
2017-06-13 17:02 York Sun
2017-06-15 13:01 ` Tom Rini
2017-02-01 16:19 york sun
2017-02-02 3:20 ` Tom Rini
2017-01-25 5:26 york sun
2017-01-26 3:00 ` Tom Rini
2016-12-20 17:15 york sun
2016-12-22 2:30 ` Tom Rini
2016-12-04 17:02 york sun
2016-12-04 23:00 ` Tom Rini
2016-11-29 22:18 york sun
2016-11-30 14:12 ` Tom Rini
2016-10-15 17:02 york sun
2016-10-18 0:08 ` Tom Rini
2016-07-22 0:17 york sun
2016-07-23 0:09 ` Tom Rini
2016-07-25 18:52 ` Scott Wood
2016-07-25 19:02 ` york sun
2016-06-04 16:03 York Sun
2016-06-06 11:16 ` Tom Rini
2016-05-25 3:37 York Sun
2016-05-26 15:49 ` Tom Rini
2016-04-08 22:45 York Sun
2016-04-11 15:00 ` Tom Rini
2016-02-26 18:51 york sun
2016-02-26 19:09 ` Tom Rini
2016-01-25 20:49 york sun
2016-01-26 22:44 ` Tom Rini
[not found] <568BFBF0.3040605@freescale.com>
2016-01-05 18:21 ` York Sun
[not found] <563A9399.80500@freescale.com>
2015-11-04 23:45 ` Tom Rini
2015-11-02 21:06 York Sun
2015-11-02 23:17 ` Tom Rini
2015-09-02 15:26 York Sun
2015-09-02 21:58 ` Tom Rini
2015-07-31 16:00 York Sun
2015-08-01 14:47 ` Tom Rini
2015-05-05 16:55 York Sun
2015-05-05 23:59 ` Tom Rini
2015-04-20 21:05 York Sun
2015-04-22 15:52 ` Tom Rini
2015-03-05 20:20 York Sun
2015-03-06 15:43 ` Tom Rini
2015-01-23 0:49 York Sun
2015-01-23 21:57 ` Tom Rini
2014-12-16 17:24 York Sun
2014-12-17 0:45 ` Tom Rini
2014-12-05 16:10 York Sun
2014-12-08 21:41 ` Tom Rini
2014-07-23 20:19 York Sun
2014-07-28 19:03 ` Tom Rini
2014-06-05 21:30 York Sun
2014-06-05 22:50 ` Tom Rini
2014-05-16 22:12 York Sun
2014-05-19 12:47 ` Tom Rini
2014-04-23 22:45 York Sun
2014-04-25 19:44 ` Tom Rini
2014-01-03 23:57 York Sun
2014-01-07 17:16 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52EFCC2A.9030908@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.