All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 01/17] ARM: shmobile: dts: Remove r8a7791-koelsch-reference.dts
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The dts file has been superseded by r8a7791-koelsch.dts and been removed
from the ARCH_SHMOBILE_LEGACY dtb target. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch-reference.dts | 115 ------------------------
 1 file changed, 115 deletions(-)
 delete mode 100644 arch/arm/boot/dts/r8a7791-koelsch-reference.dts

diff --git a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
deleted file mode 100644
index 588ca17..0000000
--- a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Koelsch";
-	compatible = "renesas,koelsch-reference", "renesas,r8a7791";
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <30>;
-			label = "SW30";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <48>;
-			label = "SW31";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <46>;
-			label = "SW32";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <32>;
-			label = "SW33";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <18>;
-			label = "SW34";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <33>;
-			label = "SW35";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <34>;
-			label = "SW36";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pfc {
-	pinctrl-0 = <&scif0_pins &scif1_pins>;
-	pinctrl-names = "default";
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data_d";
-		renesas,function = "scif1";
-	};
-};
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 01/17] ARM: shmobile: dts: Remove r8a7791-koelsch-reference.dts
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The dts file has been superseded by r8a7791-koelsch.dts and been removed
from the ARCH_SHMOBILE_LEGACY dtb target. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch-reference.dts | 115 ------------------------
 1 file changed, 115 deletions(-)
 delete mode 100644 arch/arm/boot/dts/r8a7791-koelsch-reference.dts

diff --git a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
deleted file mode 100644
index 588ca17..0000000
--- a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree Source for the Koelsch board
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Koelsch";
-	compatible = "renesas,koelsch-reference", "renesas,r8a7791";
-
-	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-	};
-
-	memory at 40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
-	};
-
-	lbsc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-a {
-			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-			linux,code = <30>;
-			label = "SW30";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-b {
-			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
-			linux,code = <48>;
-			label = "SW31";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-c {
-			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
-			linux,code = <46>;
-			label = "SW32";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-d {
-			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
-			linux,code = <32>;
-			label = "SW33";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-e {
-			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
-			linux,code = <18>;
-			label = "SW34";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-f {
-			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
-			linux,code = <33>;
-			label = "SW35";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-		key-g {
-			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-			linux,code = <34>;
-			label = "SW36";
-			gpio-key,wakeup;
-			debounce-interval = <20>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led6 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-		};
-		led7 {
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		};
-		led8 {
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&pfc {
-	pinctrl-0 = <&scif0_pins &scif1_pins>;
-	pinctrl-names = "default";
-
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data_d";
-		renesas,function = "scif1";
-	};
-};
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 02/17] ARM: shmobile: Add GPIO keys to Koelsch DTS
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The Koelsh reference device tree is going away, copy the missing GPIO
keys device node to the Koeslch device tree file.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 54 +++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index fd556c3..c6f5de3 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -31,6 +31,60 @@
 		#size-cells = <1>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-a {
+			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+			linux,code = <30>;
+			label = "SW30";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <48>;
+			label = "SW31";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+			linux,code = <46>;
+			label = "SW32";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+			linux,code = <32>;
+			label = "SW33";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-e {
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			linux,code = <18>;
+			label = "SW34";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-f {
+			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+			linux,code = <33>;
+			label = "SW35";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-g {
+			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+			linux,code = <34>;
+			label = "SW36";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led6 {
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 02/17] ARM: shmobile: Add GPIO keys to Koelsch DTS
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The Koelsh reference device tree is going away, copy the missing GPIO
keys device node to the Koeslch device tree file.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 54 +++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index fd556c3..c6f5de3 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -31,6 +31,60 @@
 		#size-cells = <1>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-a {
+			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+			linux,code = <30>;
+			label = "SW30";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <48>;
+			label = "SW31";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+			linux,code = <46>;
+			label = "SW32";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+			linux,code = <32>;
+			label = "SW33";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-e {
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			linux,code = <18>;
+			label = "SW34";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-f {
+			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+			linux,code = <33>;
+			label = "SW35";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-g {
+			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+			linux,code = <34>;
+			label = "SW36";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		led6 {
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 03/17] ARM: shmobile: koelsch: (1+1)GiB memory in DT
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Takashi Yoshii <takasi-y@ops.dti.ne.jp>

Fix dts to have memory 1GiB @ 0_4000_0000 + 1GiB @ 2_0000_0000
according to Koelsch's hardware manual.

Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index c6f5de3..d30527d 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -23,7 +23,12 @@
 
 	memory@40000000 {
 		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
 	};
 
 	lbsc {
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 03/17] ARM: shmobile: koelsch: (1+1)GiB memory in DT
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Takashi Yoshii <takasi-y@ops.dti.ne.jp>

Fix dts to have memory 1GiB @ 0_4000_0000 + 1GiB @ 2_0000_0000
according to Koelsch's hardware manual.

Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index c6f5de3..d30527d 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -23,7 +23,12 @@
 
 	memory at 40000000 {
 		device_type = "memory";
-		reg = <0 0x40000000 0 0x80000000>;
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory at 200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
 	};
 
 	lbsc {
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 04/17] ARM: shmobile: r8a7791: Add thermal clock in device tree
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Add the missing thermal MSTP clock to the thermal device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 19c6550..34f5d39 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -151,6 +151,7 @@
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
 	};
 
 	timer {
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 04/17] ARM: shmobile: r8a7791: Add thermal clock in device tree
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Add the missing thermal MSTP clock to the thermal device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 19c6550..34f5d39 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -151,6 +151,7 @@
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
 	};
 
 	timer {
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 05/17] ARM: shmobile: r8a7790: Add thermal clock in device tree
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Add the missing thermal MSTP clock to the thermal device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 71b1251..96fc731 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -168,6 +168,7 @@
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
 	};
 
 	timer {
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 05/17] ARM: shmobile: r8a7790: Add thermal clock in device tree
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Add the missing thermal MSTP clock to the thermal device node.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 71b1251..96fc731 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -168,6 +168,7 @@
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
 	};
 
 	timer {
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 06/17] ARM: shmobile: r8a7791: Add serial ports to the device tree
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Add all serial ports marked as disabled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 180 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 180 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 34f5d39..00ed0e0 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -186,6 +186,186 @@
 		#gpio-range-cells = <3>;
 	};
 
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa3: serial@e6c70000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c70000 0 64>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa4: serial@e6c78000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c78000 0 64>;
+		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa5: serial@e6c80000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c80000 0 64>;
+		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial@e6e60000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@e6e68000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif2: serial@e6e58000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e58000 0 64>;
+		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif3: serial@e6ea8000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ea8000 0 64>;
+		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif4: serial@e6ee0000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ee0000 0 64>;
+		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif5: serial@e6ee8000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ee8000 0 64>;
+		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial@e62c0000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial@e62c8000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif2: serial@e62d0000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62d0000 0 96>;
+		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 06/17] ARM: shmobile: r8a7791: Add serial ports to the device tree
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Add all serial ports marked as disabled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 180 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 180 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 34f5d39..00ed0e0 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -186,6 +186,186 @@
 		#gpio-range-cells = <3>;
 	};
 
+	scifa0: serial at e6c40000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial at e6c50000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial at e6c60000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa3: serial at e6c70000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c70000 0 64>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa4: serial at e6c78000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c78000 0 64>;
+		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa5: serial at e6c80000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c80000 0 64>;
+		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial at e6c20000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial at e6c30000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial at e6ce0000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial at e6e60000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial at e6e68000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif2: serial at e6e58000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e58000 0 64>;
+		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif3: serial at e6ea8000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ea8000 0 64>;
+		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif4: serial at e6ee0000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ee0000 0 64>;
+		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif5: serial at e6ee8000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ee8000 0 64>;
+		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial at e62c0000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial at e62c8000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif2: serial at e62d0000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62d0000 0 96>;
+		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 07/17] ARM: shmobile: r8a7790: Add serial ports to the device tree
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The platform code serial port instantiation mechanism is kept for the
non-DT platforms only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 100 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 96fc731..15e2a97 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -300,6 +300,106 @@
 		status = "disabled";
 	};
 
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		reg = <0 0xe6c40000 0 64>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial@e6e60000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 4>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@e6e68000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 4>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial@e62c0000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 4>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial@e62c8000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 4>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 07/17] ARM: shmobile: r8a7790: Add serial ports to the device tree
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The platform code serial port instantiation mechanism is kept for the
non-DT platforms only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 100 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 96fc731..15e2a97 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -300,6 +300,106 @@
 		status = "disabled";
 	};
 
+	scifa0: serial at e6c40000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		reg = <0 0xe6c40000 0 64>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial at e6c50000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial at e6c60000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial at e6c20000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial at e6c30000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial at e6ce0000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 4>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial at e6e60000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 4>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial at e6e68000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 4>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial at e62c0000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 4>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial at e62c8000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif-generic";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 4>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 08/17] ARM: shmobile: r8a7790: Add VIN clocks to device tree
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 15e2a97..9e4202c 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -708,10 +708,13 @@
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>;
 			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7790_CLK_ETHER>;
-			clock-output-names = "ether";
+			renesas,clock-indices = <
+				R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1
+				R8A7790_CLK_VIN0 R8A7790_CLK_ETHER
+			>;
+			clock-output-names = "vin3", "vin2", "vin1", "vin0", "ether";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 08/17] ARM: shmobile: r8a7790: Add VIN clocks to device tree
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 15e2a97..9e4202c 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -708,10 +708,13 @@
 		mstp8_clks: mstp8_clks at e6150990 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>;
 			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7790_CLK_ETHER>;
-			clock-output-names = "ether";
+			renesas,clock-indices = <
+				R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1
+				R8A7790_CLK_VIN0 R8A7790_CLK_ETHER
+			>;
+			clock-output-names = "vin3", "vin2", "vin1", "vin0", "ether";
 		};
 		mstp9_clks: mstp9_clks at e6150994 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 09/17] ARM: shmobile: r8a7791: Add VIN clocks to device tree
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 00ed0e0..93c6f4d 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -655,10 +655,13 @@
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>;
 			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7791_CLK_ETHER>;
-			clock-output-names = "ether";
+			renesas,clock-indices = <
+				R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
+				R8A7791_CLK_ETHER
+			>;
+			clock-output-names = "vin2", "vin1", "vin0", "ether";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 09/17] ARM: shmobile: r8a7791: Add VIN clocks to device tree
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 00ed0e0..93c6f4d 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -655,10 +655,13 @@
 		mstp8_clks: mstp8_clks at e6150990 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>;
 			#clock-cells = <1>;
-			renesas,clock-indices = <R8A7791_CLK_ETHER>;
-			clock-output-names = "ether";
+			renesas,clock-indices = <
+				R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
+				R8A7791_CLK_ETHER
+			>;
+			clock-output-names = "vin2", "vin1", "vin0", "ether";
 		};
 		mstp9_clks: mstp9_clks at e6150994 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 10/17] ARM: shmobile: r8a7790: Add SATA clocks to device tree
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 9e4202c..8cc68f7 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -708,13 +708,16 @@
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>,
+				 <&zs_clk>, <&zs_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
 				R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1
-				R8A7790_CLK_VIN0 R8A7790_CLK_ETHER
+				R8A7790_CLK_VIN0 R8A7790_CLK_ETHER R8A7790_CLK_SATA1
+				R8A7790_CLK_SATA0
 			>;
-			clock-output-names = "vin3", "vin2", "vin1", "vin0", "ether";
+			clock-output-names +				"vin3", "vin2", "vin1", "vin0", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 10/17] ARM: shmobile: r8a7790: Add SATA clocks to device tree
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 9e4202c..8cc68f7 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -708,13 +708,16 @@
 		mstp8_clks: mstp8_clks at e6150990 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>,
+				 <&zs_clk>, <&zs_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
 				R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1
-				R8A7790_CLK_VIN0 R8A7790_CLK_ETHER
+				R8A7790_CLK_VIN0 R8A7790_CLK_ETHER R8A7790_CLK_SATA1
+				R8A7790_CLK_SATA0
 			>;
-			clock-output-names = "vin3", "vin2", "vin1", "vin0", "ether";
+			clock-output-names =
+				"vin3", "vin2", "vin1", "vin0", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks at e6150994 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 11/17] ARM: shmobile: r8a7791: Add SATA clocks to device tree
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 93c6f4d..94e3cc1 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -655,13 +655,15 @@
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
 				R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
-				R8A7791_CLK_ETHER
+				R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
 			>;
-			clock-output-names = "vin2", "vin1", "vin0", "ether";
+			clock-output-names +				"vin2", "vin1", "vin0", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 11/17] ARM: shmobile: r8a7791: Add SATA clocks to device tree
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 93c6f4d..94e3cc1 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -655,13 +655,15 @@
 		mstp8_clks: mstp8_clks at e6150990 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>;
 			#clock-cells = <1>;
 			renesas,clock-indices = <
 				R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
-				R8A7791_CLK_ETHER
+				R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
 			>;
-			clock-output-names = "vin2", "vin1", "vin0", "ether";
+			clock-output-names =
+				"vin2", "vin1", "vin0", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks at e6150994 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 12/17] ARM: shmobile: r8a7791: Add SATA nodes to r8a7791.dtsi
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Valentine Barshak <valentine.barshak@cogentembedded.com>

This adds SATA[01] device nodes to r8a7791.dtsi.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 94e3cc1..d5cc362 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -366,6 +366,24 @@
 		status = "disabled";
 	};
 
+	sata0: sata@ee300000 {
+		compatible = "renesas,sata-r8a7791";
+		reg = <0 0xee300000 0 0x2000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
+		status = "disabled";
+	};
+
+	sata1: sata@ee500000 {
+		compatible = "renesas,sata-r8a7791";
+		reg = <0 0xee500000 0 0x2000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 12/17] ARM: shmobile: r8a7791: Add SATA nodes to r8a7791.dtsi
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Valentine Barshak <valentine.barshak@cogentembedded.com>

This adds SATA[01] device nodes to r8a7791.dtsi.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 94e3cc1..d5cc362 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -366,6 +366,24 @@
 		status = "disabled";
 	};
 
+	sata0: sata at ee300000 {
+		compatible = "renesas,sata-r8a7791";
+		reg = <0 0xee300000 0 0x2000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
+		status = "disabled";
+	};
+
+	sata1: sata at ee500000 {
+		compatible = "renesas,sata-r8a7791";
+		reg = <0 0xee500000 0 0x2000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 13/17] ARM: shmobile: koelsch: Enable SATA0 in r8a7791-koelsch.dts
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Valentine Barshak <valentine.barshak@cogentembedded.com>

This enables SATA0 in Koelsch device tree.
SATA1 is not available on Koelsch since
its pinmux configuration is fixed to PCIe.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index d30527d..74f0985 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -122,3 +122,7 @@
 		renesas,function = "scif1";
 	};
 };
+
+&sata0 {
+	status = "okay";
+};
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 13/17] ARM: shmobile: koelsch: Enable SATA0 in r8a7791-koelsch.dts
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Valentine Barshak <valentine.barshak@cogentembedded.com>

This enables SATA0 in Koelsch device tree.
SATA1 is not available on Koelsch since
its pinmux configuration is fixed to PCIe.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index d30527d..74f0985 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -122,3 +122,7 @@
 		renesas,function = "scif1";
 	};
 };
+
+&sata0 {
+	status = "okay";
+};
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 14/17] ARM: shmobile: r8a7790: Add SATA nodes to r8a7790.dtsi
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Valentine Barshak <valentine.barshak@cogentembedded.com>

This adds SATA[01] device nodes to r8a7790.dtsi

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 8cc68f7..0914921 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -400,6 +400,24 @@
 		status = "disabled";
 	};
 
+	sata0: sata@ee300000 {
+		compatible = "renesas,sata-r8a7790";
+		reg = <0 0xee300000 0 0x2000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+		status = "disabled";
+	};
+
+	sata1: sata@ee500000 {
+		compatible = "renesas,sata-r8a7790";
+		reg = <0 0xee500000 0 0x2000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 14/17] ARM: shmobile: r8a7790: Add SATA nodes to r8a7790.dtsi
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Valentine Barshak <valentine.barshak@cogentembedded.com>

This adds SATA[01] device nodes to r8a7790.dtsi

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 8cc68f7..0914921 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -400,6 +400,24 @@
 		status = "disabled";
 	};
 
+	sata0: sata at ee300000 {
+		compatible = "renesas,sata-r8a7790";
+		reg = <0 0xee300000 0 0x2000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+		status = "disabled";
+	};
+
+	sata1: sata at ee500000 {
+		compatible = "renesas,sata-r8a7790";
+		reg = <0 0xee500000 0 0x2000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [GIT PULL 00/17] Renesas ARM Based SoC DT Updates for v3.15
@ 2014-02-06  6:20 ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Olof, Hi Kevin, Hi Arnd,

please consider these Renesas ARM Based SoC DT updates for v3.15.


The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:

  Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v3.15

for you to fetch changes up to 1f4c745b2c5a083c49dc11d2f0827d9a381f1ee1:

  ARM: shmobile: r8a7790: Replace IRQ type numerical values with macros (2014-02-04 10:17:00 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v3.15

* r8a7791 (R-Car M2) based Koelsch board
  - Enable GPIO Keys, (1+1)GiB memory, SATA0 and serial ports
  - Add VIN and thermal clocks
  - Remove r8a7791-koelsch-reference.dts

* r8a7790 (R-Car H2) based Lager board
  - Replace IRQ type numerical values with macros
  - Enable SATA0 and serial ports
  - Add VIN and thermal clocks

----------------------------------------------------------------
Geert Uytterhoeven (2):
      ARM: shmobile: r8a7791: Add thermal clock in device tree
      ARM: shmobile: r8a7790: Add thermal clock in device tree

Laurent Pinchart (10):
      ARM: shmobile: dts: Remove r8a7791-koelsch-reference.dts
      ARM: shmobile: Add GPIO keys to Koelsch DTS
      ARM: shmobile: r8a7791: Add serial ports to the device tree
      ARM: shmobile: r8a7790: Add serial ports to the device tree
      ARM: shmobile: r8a7790: Add VIN clocks to device tree
      ARM: shmobile: r8a7791: Add VIN clocks to device tree
      ARM: shmobile: r8a7790: Add SATA clocks to device tree
      ARM: shmobile: r8a7791: Add SATA clocks to device tree
      ARM: shmobile: r8a7790: Fix serial ports DT compatible strings
      ARM: shmobile: r8a7790: Replace IRQ type numerical values with macros

Takashi Yoshii (1):
      ARM: shmobile: koelsch: (1+1)GiB memory in DT

Valentine Barshak (4):
      ARM: shmobile: r8a7791: Add SATA nodes to r8a7791.dtsi
      ARM: shmobile: koelsch: Enable SATA0 in r8a7791-koelsch.dts
      ARM: shmobile: r8a7790: Add SATA nodes to r8a7790.dtsi
      ARM: shmobile: lager: Enable SATA1 in r8a7790-lager.dts

 arch/arm/boot/dts/r8a7790-lager.dts             |   4 +
 arch/arm/boot/dts/r8a7790.dtsi                  | 131 ++++++++++++++-
 arch/arm/boot/dts/r8a7791-koelsch-reference.dts | 115 -------------
 arch/arm/boot/dts/r8a7791-koelsch.dts           |  65 +++++++-
 arch/arm/boot/dts/r8a7791.dtsi                  | 210 +++++++++++++++++++++++-
 5 files changed, 403 insertions(+), 122 deletions(-)
 delete mode 100644 arch/arm/boot/dts/r8a7791-koelsch-reference.dts

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH 15/17] ARM: shmobile: lager: Enable SATA1 in r8a7790-lager.dts
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Valentine Barshak <valentine.barshak@cogentembedded.com>

This enables SATA1 in Lager device tree.
SATA0 is not available on Lager since its
pinmux is fixed to USB3.0.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 57569cb..1081c5e 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -91,3 +91,7 @@
 	non-removable;
 	status = "okay";
 };
+
+&sata1 {
+	status = "okay";
+};
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [GIT PULL 00/17] Renesas ARM Based SoC DT Updates for v3.15
@ 2014-02-06  6:20 ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Olof, Hi Kevin, Hi Arnd,

please consider these Renesas ARM Based SoC DT updates for v3.15.


The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:

  Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v3.15

for you to fetch changes up to 1f4c745b2c5a083c49dc11d2f0827d9a381f1ee1:

  ARM: shmobile: r8a7790: Replace IRQ type numerical values with macros (2014-02-04 10:17:00 +0900)

----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v3.15

* r8a7791 (R-Car M2) based Koelsch board
  - Enable GPIO Keys, (1+1)GiB memory, SATA0 and serial ports
  - Add VIN and thermal clocks
  - Remove r8a7791-koelsch-reference.dts

* r8a7790 (R-Car H2) based Lager board
  - Replace IRQ type numerical values with macros
  - Enable SATA0 and serial ports
  - Add VIN and thermal clocks

----------------------------------------------------------------
Geert Uytterhoeven (2):
      ARM: shmobile: r8a7791: Add thermal clock in device tree
      ARM: shmobile: r8a7790: Add thermal clock in device tree

Laurent Pinchart (10):
      ARM: shmobile: dts: Remove r8a7791-koelsch-reference.dts
      ARM: shmobile: Add GPIO keys to Koelsch DTS
      ARM: shmobile: r8a7791: Add serial ports to the device tree
      ARM: shmobile: r8a7790: Add serial ports to the device tree
      ARM: shmobile: r8a7790: Add VIN clocks to device tree
      ARM: shmobile: r8a7791: Add VIN clocks to device tree
      ARM: shmobile: r8a7790: Add SATA clocks to device tree
      ARM: shmobile: r8a7791: Add SATA clocks to device tree
      ARM: shmobile: r8a7790: Fix serial ports DT compatible strings
      ARM: shmobile: r8a7790: Replace IRQ type numerical values with macros

Takashi Yoshii (1):
      ARM: shmobile: koelsch: (1+1)GiB memory in DT

Valentine Barshak (4):
      ARM: shmobile: r8a7791: Add SATA nodes to r8a7791.dtsi
      ARM: shmobile: koelsch: Enable SATA0 in r8a7791-koelsch.dts
      ARM: shmobile: r8a7790: Add SATA nodes to r8a7790.dtsi
      ARM: shmobile: lager: Enable SATA1 in r8a7790-lager.dts

 arch/arm/boot/dts/r8a7790-lager.dts             |   4 +
 arch/arm/boot/dts/r8a7790.dtsi                  | 131 ++++++++++++++-
 arch/arm/boot/dts/r8a7791-koelsch-reference.dts | 115 -------------
 arch/arm/boot/dts/r8a7791-koelsch.dts           |  65 +++++++-
 arch/arm/boot/dts/r8a7791.dtsi                  | 210 +++++++++++++++++++++++-
 5 files changed, 403 insertions(+), 122 deletions(-)
 delete mode 100644 arch/arm/boot/dts/r8a7791-koelsch-reference.dts

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [PATCH 15/17] ARM: shmobile: lager: Enable SATA1 in r8a7790-lager.dts
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Valentine Barshak <valentine.barshak@cogentembedded.com>

This enables SATA1 in Lager device tree.
SATA0 is not available on Lager since its
pinmux is fixed to USB3.0.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 57569cb..1081c5e 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -91,3 +91,7 @@
 	non-removable;
 	status = "okay";
 };
+
+&sata1 {
+	status = "okay";
+};
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 16/17] ARM: shmobile: r8a7790: Fix serial ports DT compatible strings
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Remove the -generic suffix that has been added by mistake from the
serial port compatible strings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0914921..51c8978 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -301,7 +301,7 @@
 	};
 
 	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 144 4>;
@@ -311,7 +311,7 @@
 	};
 
 	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c50000 0 64>;
 		interrupts = <0 145 4>;
@@ -321,7 +321,7 @@
 	};
 
 	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c60000 0 64>;
 		interrupts = <0 151 4>;
@@ -331,7 +331,7 @@
 	};
 
 	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c20000 0 64>;
 		interrupts = <0 148 4>;
@@ -341,7 +341,7 @@
 	};
 
 	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c30000 0 64>;
 		interrupts = <0 149 4>;
@@ -351,7 +351,7 @@
 	};
 
 	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6ce0000 0 64>;
 		interrupts = <0 150 4>;
@@ -361,7 +361,7 @@
 	};
 
 	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif-generic";
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6e60000 0 64>;
 		interrupts = <0 152 4>;
@@ -371,7 +371,7 @@
 	};
 
 	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif-generic";
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6e68000 0 64>;
 		interrupts = <0 153 4>;
@@ -381,7 +381,7 @@
 	};
 
 	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif-generic";
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe62c0000 0 96>;
 		interrupts = <0 154 4>;
@@ -391,7 +391,7 @@
 	};
 
 	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif-generic";
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe62c8000 0 96>;
 		interrupts = <0 155 4>;
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 16/17] ARM: shmobile: r8a7790: Fix serial ports DT compatible strings
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Remove the -generic suffix that has been added by mistake from the
serial port compatible strings.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0914921..51c8978 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -301,7 +301,7 @@
 	};
 
 	scifa0: serial at e6c40000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 144 4>;
@@ -311,7 +311,7 @@
 	};
 
 	scifa1: serial at e6c50000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c50000 0 64>;
 		interrupts = <0 145 4>;
@@ -321,7 +321,7 @@
 	};
 
 	scifa2: serial at e6c60000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c60000 0 64>;
 		interrupts = <0 151 4>;
@@ -331,7 +331,7 @@
 	};
 
 	scifb0: serial at e6c20000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c20000 0 64>;
 		interrupts = <0 148 4>;
@@ -341,7 +341,7 @@
 	};
 
 	scifb1: serial at e6c30000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c30000 0 64>;
 		interrupts = <0 149 4>;
@@ -351,7 +351,7 @@
 	};
 
 	scifb2: serial at e6ce0000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb-generic";
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6ce0000 0 64>;
 		interrupts = <0 150 4>;
@@ -361,7 +361,7 @@
 	};
 
 	scif0: serial at e6e60000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif-generic";
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6e60000 0 64>;
 		interrupts = <0 152 4>;
@@ -371,7 +371,7 @@
 	};
 
 	scif1: serial at e6e68000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif-generic";
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6e68000 0 64>;
 		interrupts = <0 153 4>;
@@ -381,7 +381,7 @@
 	};
 
 	hscif0: serial at e62c0000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif-generic";
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe62c0000 0 96>;
 		interrupts = <0 154 4>;
@@ -391,7 +391,7 @@
 	};
 
 	hscif1: serial at e62c8000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif-generic";
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe62c8000 0 96>;
 		interrupts = <0 155 4>;
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 17/17] ARM: shmobile: r8a7790: Replace IRQ type numerical values with macros
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-06  6:20   ` Simon Horman
  -1 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace the hardcoded value 4 with IRQ_TYPE_LEVEL_HIGH.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 51c8978..ba0ef9a 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -304,7 +304,7 @@
 		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
 		interrupt-parent = <&gic>;
-		interrupts = <0 144 4>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -314,7 +314,7 @@
 		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 4>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -324,7 +324,7 @@
 		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 4>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -334,7 +334,7 @@
 		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 4>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -344,7 +344,7 @@
 		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 4>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -354,7 +354,7 @@
 		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 4>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -364,7 +364,7 @@
 		compatible = "renesas,scif-r8a7790", "renesas,scif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 4>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -374,7 +374,7 @@
 		compatible = "renesas,scif-r8a7790", "renesas,scif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 4>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -384,7 +384,7 @@
 		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 4>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -394,7 +394,7 @@
 		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 4>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
 		clock-names = "sci_ick";
 		status = "disabled";
-- 
1.8.5.2


^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [PATCH 17/17] ARM: shmobile: r8a7790: Replace IRQ type numerical values with macros
@ 2014-02-06  6:20   ` Simon Horman
  0 siblings, 0 replies; 38+ messages in thread
From: Simon Horman @ 2014-02-06  6:20 UTC (permalink / raw)
  To: linux-arm-kernel

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Replace the hardcoded value 4 with IRQ_TYPE_LEVEL_HIGH.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 51c8978..ba0ef9a 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -304,7 +304,7 @@
 		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
 		interrupt-parent = <&gic>;
-		interrupts = <0 144 4>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -314,7 +314,7 @@
 		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 4>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -324,7 +324,7 @@
 		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 4>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -334,7 +334,7 @@
 		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 4>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -344,7 +344,7 @@
 		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 4>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -354,7 +354,7 @@
 		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 4>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -364,7 +364,7 @@
 		compatible = "renesas,scif-r8a7790", "renesas,scif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 4>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -374,7 +374,7 @@
 		compatible = "renesas,scif-r8a7790", "renesas,scif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 4>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -384,7 +384,7 @@
 		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 4>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
 		clock-names = "sci_ick";
 		status = "disabled";
@@ -394,7 +394,7 @@
 		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
 		interrupt-parent = <&gic>;
 		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 4>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
 		clock-names = "sci_ick";
 		status = "disabled";
-- 
1.8.5.2

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* Re: [GIT PULL 00/17] Renesas ARM Based SoC DT Updates for v3.15
  2014-02-06  6:20 ` Simon Horman
@ 2014-02-20  8:30   ` Olof Johansson
  -1 siblings, 0 replies; 38+ messages in thread
From: Olof Johansson @ 2014-02-20  8:30 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, Feb 06, 2014 at 03:20:50PM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> please consider these Renesas ARM Based SoC DT updates for v3.15.
> 
> 
> The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:
> 
>   Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v3.15

Merged, thanks.


-Olof

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [GIT PULL 00/17] Renesas ARM Based SoC DT Updates for v3.15
@ 2014-02-20  8:30   ` Olof Johansson
  0 siblings, 0 replies; 38+ messages in thread
From: Olof Johansson @ 2014-02-20  8:30 UTC (permalink / raw)
  To: linux-arm-kernel

On Thu, Feb 06, 2014 at 03:20:50PM +0900, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> please consider these Renesas ARM Based SoC DT updates for v3.15.
> 
> 
> The following changes since commit 38dbfb59d1175ef458d006556061adeaa8751b72:
> 
>   Linus 3.14-rc1 (2014-02-02 16:42:13 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v3.15

Merged, thanks.


-Olof

^ permalink raw reply	[flat|nested] 38+ messages in thread

end of thread, other threads:[~2014-02-20  8:30 UTC | newest]

Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-06  6:20 [GIT PULL 00/17] Renesas ARM Based SoC DT Updates for v3.15 Simon Horman
2014-02-06  6:20 ` Simon Horman
2014-02-06  6:20 ` [PATCH 01/17] ARM: shmobile: dts: Remove r8a7791-koelsch-reference.dts Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 02/17] ARM: shmobile: Add GPIO keys to Koelsch DTS Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 03/17] ARM: shmobile: koelsch: (1+1)GiB memory in DT Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 04/17] ARM: shmobile: r8a7791: Add thermal clock in device tree Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 05/17] ARM: shmobile: r8a7790: " Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 06/17] ARM: shmobile: r8a7791: Add serial ports to the " Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 07/17] ARM: shmobile: r8a7790: " Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 08/17] ARM: shmobile: r8a7790: Add VIN clocks to " Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 09/17] ARM: shmobile: r8a7791: " Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 10/17] ARM: shmobile: r8a7790: Add SATA " Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 11/17] ARM: shmobile: r8a7791: " Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 12/17] ARM: shmobile: r8a7791: Add SATA nodes to r8a7791.dtsi Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 13/17] ARM: shmobile: koelsch: Enable SATA0 in r8a7791-koelsch.dts Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 14/17] ARM: shmobile: r8a7790: Add SATA nodes to r8a7790.dtsi Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 15/17] ARM: shmobile: lager: Enable SATA1 in r8a7790-lager.dts Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 16/17] ARM: shmobile: r8a7790: Fix serial ports DT compatible strings Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-06  6:20 ` [PATCH 17/17] ARM: shmobile: r8a7790: Replace IRQ type numerical values with macros Simon Horman
2014-02-06  6:20   ` Simon Horman
2014-02-20  8:30 ` [GIT PULL 00/17] Renesas ARM Based SoC DT Updates for v3.15 Olof Johansson
2014-02-20  8:30   ` Olof Johansson

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.