All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Michael Grützner" <mgruetzn@gmx.de>
To: Gustavo Padovan <gustavo@padovan.org>,
	marcel@holtmann.org, johan.hedberg@gmail.com,
	linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C
Date: Wed, 02 May 2012 22:33:40 +0200	[thread overview]
Message-ID: <5301735.uaK8kx1qmQ@dagobah> (raw)
In-Reply-To: <20120502150844.GB16030@joana>

From: Michael Gruetzner <mgruetzn@gmx.de>

Add Foxconn/Hon Hai AR5BBU22 Bluetooth Module( 0x489:0xE03C) to
the blacklist of btusb module and add it to the ath3k module to properly
load the firmware in Kernel 3.3.4
The device is integrated in  e.g. some  Acer Aspire 7750G.

Output from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#=  6 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e03c Rev= 0.02
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
 
Signed-off-by: Michael Gruetzner <mgruetzn@gmx.de>
---
 drivers/bluetooth/ath3k.c |    6 ++++++
 drivers/bluetooth/btusb.c |    3 +++
 2 files changed, 9 insertions(+)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 57fd867..aba22b2 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -81,6 +81,9 @@ static struct usb_device_id ath3k_table[] = {
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
 
+	/* Atheros AR5BBU22 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xE03C) },
+
 	{ }	/* Terminating entry */
 };
 
@@ -99,6 +102,9 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 
+	/* Atheros AR5BBU22 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
+
 	{ }	/* Terminating entry */
 };
 
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index de17121..cb480f1 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -143,6 +143,9 @@ static struct usb_device_id blacklist_table[] = {
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
 
+	/* Atheros AR5BBU12 with sflash firmware */
+	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
+
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
 	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
-- 
1.7.9.2



  reply	other threads:[~2012-05-02 20:33 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-30 23:43 [PATCH 1/1] bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Michael Grützner
2012-05-02 15:08 ` Gustavo Padovan
2012-05-02 15:08   ` Gustavo Padovan
2012-05-02 20:33   ` Michael Grützner [this message]
2012-05-02 21:28     ` Gustavo Padovan
2012-05-02 21:28       ` Gustavo Padovan
2012-05-29 12:27 ` [3.0.y, 3.2.y, 3.4.y] " Jonathan Nieder
2012-05-30  1:26   ` Michael Grützner
2012-06-01  9:18   ` Greg KH
2012-06-06 14:07   ` Ben Hutchings
  -- strict thread matches above, loose matches on Subject: below --
2012-04-30 23:37 Michael Grützner
2012-04-30  1:41 Michael Grützner
2012-04-30  9:33 ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5301735.uaK8kx1qmQ@dagobah \
    --to=mgruetzn@gmx.de \
    --cc=gustavo@padovan.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.