From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Tue, 25 Feb 2014 09:50:39 +0100 Subject: [U-Boot] [PATCH v3 1/7] nand: Add zynq nand controller driver support In-Reply-To: <95070e4f-822c-4223-bfcb-a927c141792c@CO9EHSMHS032.ehs.local> References: <1392639991-18798-1-git-send-email-sivadur@xilinx.com> <95070e4f-822c-4223-bfcb-a927c141792c@CO9EHSMHS032.ehs.local> Message-ID: <530C595F.7060003@monstr.eu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Scott, On 02/17/2014 01:26 PM, Siva Durga Prasad Paladugu wrote: > From: Jagannadha Sutradharudu Teki > > Added support for Zynq Nand controller driver. > > Signed-off-by: Siva Durga Prasad Paladugu > Signed-off-by: Jagannadha Sutradharudu Teki > --- > Changes for v3: > -Fixed all review comments on v1 as > some comments are not fixed on v2. > -Separeted out the nand patch series > as per Michal comment. > Changes for v2: > -Fixed issues pointed by Scott > --- > README | 3 + > arch/arm/include/asm/arch-zynq/hardware.h | 2 + > drivers/mtd/nand/Makefile | 1 + > drivers/mtd/nand/zynq_nand.c | 1188 +++++++++++++++++++++++++++++ > 4 files changed, 1194 insertions(+), 0 deletions(-) > create mode 100755 drivers/mtd/nand/zynq_nand.c One note: Here is incorrect file permission. Can you please review this driver? Patches 2-7 should go through ARM tree but this first one should go through your tree. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: