From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?B?QW5kcmVhcyBGw6RyYmVy?= Date: Sun, 02 Mar 2014 23:00:19 +0100 Subject: [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts In-Reply-To: <53139B3E.7010907@suse.de> References: <1390798091-24747-1-git-send-email-afaerber@suse.de> <20140127142403.8C31E38033A@gemini.denx.de> <52E6A96B.1080002@suse.de> <20140213123907.6b97040e@lilith> <20140222142753.6f0768b8@lilith> <531370FA.5090207@suse.de> <20140302191552.BF553D48072@smtp5-g21.free.fr> <53139B3E.7010907@suse.de> Message-ID: <5313A9F3.7020907@suse.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Am 02.03.2014 21:57, schrieb Andreas F?rber: > Hi Albert, > > Am 02.03.2014 20:15, schrieb Albert ARIBAUD: >> Hi Andreas, >> >> On Sun, 02 Mar 2014 18:57:14 +0100, Andreas F?rber >> wrote: >> >>> Hi Albert, >>> >>> Am 22.02.2014 14:27, schrieb Albert ARIBAUD: >>>> On Thu, 13 Feb 2014 12:39:07 +0100, Albert ARIBAUD >>>> wrote: >>>> >>>>> Can you point me to the toolchain you are using, and if you are not >>>>> building mainline code, can you make this code available to me somehow? > [...] >>> Our latest GCC 4.8.2 can be found here: >>> https://build.opensuse.org/package/show/openSUSE:Factory:ARM/gcc48 >>> >>> Matching binutils 2.24 are here: >>> https://build.opensuse.org/package/show/openSUSE:Factory:ARM/binutils >>> >>> Our latest U-Boot tarball and patches: >>> https://build.opensuse.org/package/show/Base:System/u-boot >>> Build logs can be found in the u-boot-* packages in the same project, >>> with underscores stripped, e.g.: >>> https://build.opensuse.org/package/show/Base:System/u-boot-am335xevm >> >> Thanks for your reply. Apparently, the problem does not appear for the >> boards in mainline U-Boot which I listed above with the source code >> from our v2014.01 tag and using gcc 4.8.1 from Linaro. I can install >> 4.8.2, but meanwhile, can you try to build v2014.01 for these boards >> with your setup? >> >> am335x_evm colibri_t20_iris highbank mx53loco omap3_beagle >> omap4_panda paz00 rpi_b > > I have commented out the patch in: > https://build.opensuse.org/project/show/home:a_faerber:branches:Base:System > > While there are apparently frequent rebuilds scheduled ATM, it seemed > like the colibri_t20_iris config intermittently built OK without it. > Maybe some gcc 4.8 stable branch update [1] resolved it ... will keep an > eye on the build status to confirm. If everything builds, I'm happy. Nah, still fails without the patch: [ 178s] gcc -E -g -Os -ffunction-sections -fdata-sections -fno-common -ffixed-r9 -msoft-float -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x0010E000 -I/home/abuild/rpmbuild/BUILD/u-boot-2014.01/include -I/home/abuild/rpmbuild/BUILD/u-boot-2014.01/arch/arm/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/lib/gcc/armv7hl-suse-linux-gnueabi/4.8/include -pipe -DCONFIG_ARM -D__ARM__ -marm -mno-thumb-interwork -mabi=aapcs-linux -mword-relocations -march=armv7-a -include /home/abuild/rpmbuild/BUILD/u-boot-2014.01/include/u-boot/u-boot.lds.h -DCPUDIR=arch/arm/cpu/armv7 -ansi -D__ASSEMBLY__ -P - u-boot.lds [ 178s] cd /home/abuild/rpmbuild/BUILD/u-boot-2014.01 && ld.bfd -pie -T u-boot.lds --gc-sections -Bstatic -Ttext 0x0010E000 arch/arm/cpu/armv7/start.o --start-group arch/arm/cpu/armv7/built-in.o arch/arm/cpu/armv7/tegra20/built-in.o arch/arm/cpu/built-in.o arch/arm/lib/built-in.o board/toradex/colibri_t20_iris/built-in.o common/built-in.o disk/built-in.o drivers/built-in.o drivers/dma/built-in.o drivers/gpio/built-in.o drivers/i2c/built-in.o drivers/input/built-in.o drivers/mmc/built-in.o drivers/mtd/built-in.o drivers/mtd/nand/built-in.o drivers/mtd/onenand/built-in.o drivers/mtd/spi/built-in.o drivers/net/built-in.o drivers/net/phy/built-in.o drivers/pci/built-in.o drivers/power/battery/built-in.o drivers/power/built-in.o drivers/power/fuel_gauge/built-in.o drivers/power/mfd/built-in.o drivers/power/pmic/built-in.o drivers/serial/built-in.o drivers/spi/built-in.o drivers/usb/eth/built-in.o drivers/usb/gadget/built-in.o drivers/usb/host/built-in.o drivers/usb/musb-new/built-in.o drivers/usb/musb/built-in.o drivers/usb/phy/built-in.o drivers/usb/ulpi/built-in.o fs/built-in.o lib/built-in.o lib/libfdt/built-in.o net/built-in.o test/built-in.o --end-group /home/abuild/rpmbuild/BUILD/u-boot-2014.01/arch/arm/lib/eabi_compat.o -L /usr/lib/gcc/armv7hl-suse-linux-gnueabi/4.8 -lgcc -Map u-boot.map -o u-boot [ 178s] ld.bfd: u-boot: could not find output section .gnu.hash [ 178s] ld.bfd: final link failed: Nonrepresentable section on output [ 178s] Makefile:556: recipe for target 'u-boot' failed [ 178s] make: *** [u-boot] Error 1 https://build.opensuse.org/package/live_build_log/home:a_faerber:branches:Base:System/u-boot-colibrit20iris/openSUSE_Factory_ARM/armv7l Regards, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imend?rffer; HRB 16746 AG N?rnberg