From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Sun, 2 Mar 2014 18:44:52 -0500 Subject: [U-Boot] [PATCH] arm: Handle .gnu.hash section in ldscripts In-Reply-To: <5313A9F3.7020907@suse.de> References: <1390798091-24747-1-git-send-email-afaerber@suse.de> <20140127142403.8C31E38033A@gemini.denx.de> <52E6A96B.1080002@suse.de> <20140213123907.6b97040e@lilith> <20140222142753.6f0768b8@lilith> <531370FA.5090207@suse.de> <20140302191552.BF553D48072@smtp5-g21.free.fr> <53139B3E.7010907@suse.de> <5313A9F3.7020907@suse.de> Message-ID: <5313C274.40002@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 03/02/2014 05:00 PM, Andreas F?rber wrote: > Am 02.03.2014 21:57, schrieb Andreas F?rber: >> Hi Albert, >> >> Am 02.03.2014 20:15, schrieb Albert ARIBAUD: >>> Hi Andreas, >>> >>> On Sun, 02 Mar 2014 18:57:14 +0100, Andreas F?rber >>> wrote: >>> >>>> Hi Albert, >>>> >>>> Am 22.02.2014 14:27, schrieb Albert ARIBAUD: >>>>> On Thu, 13 Feb 2014 12:39:07 +0100, Albert ARIBAUD >>>>> wrote: >>>>> >>>>>> Can you point me to the toolchain you are using, and if you are not >>>>>> building mainline code, can you make this code available to me somehow? >> [...] >>>> Our latest GCC 4.8.2 can be found here: >>>> https://build.opensuse.org/package/show/openSUSE:Factory:ARM/gcc48 >>>> >>>> Matching binutils 2.24 are here: >>>> https://build.opensuse.org/package/show/openSUSE:Factory:ARM/binutils >>>> >>>> Our latest U-Boot tarball and patches: >>>> https://build.opensuse.org/package/show/Base:System/u-boot >>>> Build logs can be found in the u-boot-* packages in the same project, >>>> with underscores stripped, e.g.: >>>> https://build.opensuse.org/package/show/Base:System/u-boot-am335xevm >>> >>> Thanks for your reply. Apparently, the problem does not appear for the >>> boards in mainline U-Boot which I listed above with the source code >>> from our v2014.01 tag and using gcc 4.8.1 from Linaro. I can install >>> 4.8.2, but meanwhile, can you try to build v2014.01 for these boards >>> with your setup? >>> >>> am335x_evm colibri_t20_iris highbank mx53loco omap3_beagle >>> omap4_panda paz00 rpi_b >> >> I have commented out the patch in: >> https://build.opensuse.org/project/show/home:a_faerber:branches:Base:System >> >> While there are apparently frequent rebuilds scheduled ATM, it seemed >> like the colibri_t20_iris config intermittently built OK without it. >> Maybe some gcc 4.8 stable branch update [1] resolved it ... will keep an >> eye on the build status to confirm. If everything builds, I'm happy. > > Nah, still fails without the patch: > > [ 178s] gcc -E -g -Os -ffunction-sections -fdata-sections > -fno-common -ffixed-r9 -msoft-float -D__KERNEL__ > -DCONFIG_SYS_TEXT_BASE=0x0010E000 > -I/home/abuild/rpmbuild/BUILD/u-boot-2014.01/include > -I/home/abuild/rpmbuild/BUILD/u-boot-2014.01/arch/arm/include > -fno-builtin -ffreestanding -nostdinc -isystem > /usr/lib/gcc/armv7hl-suse-linux-gnueabi/4.8/include -pipe -DCONFIG_ARM > -D__ARM__ -marm -mno-thumb-interwork -mabi=aapcs-linux > -mword-relocations -march=armv7-a -include > /home/abuild/rpmbuild/BUILD/u-boot-2014.01/include/u-boot/u-boot.lds.h > -DCPUDIR=arch/arm/cpu/armv7 -ansi -D__ASSEMBLY__ -P - > > u-boot.lds > [ 178s] cd /home/abuild/rpmbuild/BUILD/u-boot-2014.01 && ld.bfd -pie > -T u-boot.lds --gc-sections -Bstatic -Ttext 0x0010E000 > arch/arm/cpu/armv7/start.o --start-group arch/arm/cpu/armv7/built-in.o > arch/arm/cpu/armv7/tegra20/built-in.o arch/arm/cpu/built-in.o > arch/arm/lib/built-in.o board/toradex/colibri_t20_iris/built-in.o > common/built-in.o disk/built-in.o drivers/built-in.o > drivers/dma/built-in.o drivers/gpio/built-in.o drivers/i2c/built-in.o > drivers/input/built-in.o drivers/mmc/built-in.o drivers/mtd/built-in.o > drivers/mtd/nand/built-in.o drivers/mtd/onenand/built-in.o > drivers/mtd/spi/built-in.o drivers/net/built-in.o > drivers/net/phy/built-in.o drivers/pci/built-in.o > drivers/power/battery/built-in.o drivers/power/built-in.o > drivers/power/fuel_gauge/built-in.o drivers/power/mfd/built-in.o > drivers/power/pmic/built-in.o drivers/serial/built-in.o > drivers/spi/built-in.o drivers/usb/eth/built-in.o > drivers/usb/gadget/built-in.o drivers/usb/host/built-in.o > drivers/usb/musb-new/built-in.o drivers/usb/musb/built-in.o > drivers/usb/phy/built-in.o drivers/usb/ulpi/built-in.o fs/built-in.o > lib/built-in.o lib/libfdt/built-in.o net/built-in.o test/built-in.o > --end-group > /home/abuild/rpmbuild/BUILD/u-boot-2014.01/arch/arm/lib/eabi_compat.o > -L /usr/lib/gcc/armv7hl-suse-linux-gnueabi/4.8 -lgcc -Map u-boot.map -o > u-boot > [ 178s] ld.bfd: u-boot: could not find output section .gnu.hash > [ 178s] ld.bfd: final link failed: Nonrepresentable section on output > [ 178s] Makefile:556: recipe for target 'u-boot' failed > [ 178s] make: *** [u-boot] Error 1 > > > https://build.opensuse.org/package/live_build_log/home:a_faerber:branches:Base:System/u-boot-colibrit20iris/openSUSE_Factory_ARM/armv7l When this fails can you save the objdir? - -- Tom -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBAgAGBQJTE8JzAAoJENk4IS6UOR1W8+AP/AprGiLzAuh3IVmZjvgRe71y enMJCdR8wo3Kw4DLPD78ZSiOXtS0R5zOHLqBcsj+4Aa3VmRAd40m0YbH0eG3QqXQ 9l9u6ueUGVsSTdhNuLnQaH71l5Ev+ykEPM6IUdvHELVrO9evc9guI0EMH3RYXOox qpRgQj9VJoRqpGzxE+UHoRgyKzK5N2UOnojhNCRVRvRk/EXTn7bWB554eTzZi2J1 9LnHiQX0MsI7SOWvXZ2jZTRCdMouJ7xMJkcUATRpgwj9m/H2QBlh4D9yZb5UD4K2 wO5wYpnr60s6H8c80HUlNrPXU1xPxi7cOMYaR9jXxFLjsGewac+e1mWNAR/zrDmI Vy0T+BvywGRp/cxOI29gYupxYxtp0ofHlYmhzz4XfspfLJiGXGrzEDzzGpzlXXDG OLEJ9v5KqM9PtTiBzj422V8Z9vxt+Hd0Iri/i8VhhIFv0KPf2spQQOoeIgLDst/V 8d2aiKFGTjl/J8aYsR7icA9+YHYqtCSeQR/npdEsoiPQoV/q5FyICAvJ7ztmOOiD gkko8RaeE0ps853UdaZs7LE5KyZJV7sF2OObo+fiNuLPk/YPWsv4dG1DsDzuRa3g DfAcaeKSqtL2SB7Se9X4FnETsHCh3BsfE6p/Wp8guJuzVrE/UhWh8lcLzDD8rxlu W6h1F96vTyM4BYCwGMT4 =IdOK -----END PGP SIGNATURE-----