From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jacek Anaszewski Subject: Re: [PATCH/RFC 8/8] DT: Add documentation for exynos4-is camera-flash property Date: Fri, 28 Mar 2014 16:31:03 +0100 Message-ID: <533595B7.2090205@samsung.com> References: <1395327070-20215-1-git-send-email-j.anaszewski@samsung.com> <1395327070-20215-9-git-send-email-j.anaszewski@samsung.com> <20140324010534.GA2847@valkosipuli.retiisi.org.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-reply-to: <20140324010534.GA2847@valkosipuli.retiisi.org.uk> Sender: linux-kernel-owner@vger.kernel.org To: Sakari Ailus Cc: linux-media@vger.kernel.org, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, s.nawrocki@samsung.com, a.hajda@samsung.com, kyungmin.park@samsung.com, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala List-Id: linux-leds@vger.kernel.org Hi Sakari, On 03/24/2014 02:05 AM, Sakari Ailus wrote: > Hi Jacek, > > On Thu, Mar 20, 2014 at 03:51:10PM +0100, Jacek Anaszewski wrote: >> Signed-off-by: Jacek Anaszewski >> Acked-by: Kyungmin Park >> Cc: Rob Herring >> Cc: Pawel Moll >> Cc: Mark Rutland >> Cc: Ian Campbell >> Cc: Kumar Gala >> --- >> .../devicetree/bindings/media/samsung-fimc.txt | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt >> index 922d6f8..88f9287 100644 >> --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt >> +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt >> @@ -108,6 +108,8 @@ Image sensor nodes >> The sensor device nodes should be added to their control bus controller (e.g. >> I2C0) nodes and linked to a port node in the csis or the parallel-ports node, >> using the common video interfaces bindings, defined in video-interfaces.txt. >> +If the sensor device has a led flash device associated with it then its phandle >> +should be assigned to the camera-flash property. >> >> Example: >> >> @@ -125,6 +127,7 @@ Example: >> clock-frequency = <24000000>; >> clocks = <&camera 1>; >> clock-names = "mclk"; >> + camera-flash = <&led_flash>; >> >> port { >> s5k6aa_ep: endpoint { > > It's indeed an interesting idea to declare the flash controller in the > sensor's properties rather than those of the ISP. The obvious upside is that > this way it's easy to figure out which subdev group the flash controller > belongs to. > > There are a few other things to consider as well: > > - You can't have a flash without a sensor. I can't think of why this would > be a real issue, though. > > - Relations other than one-to-one become difficult. One flash but two > cameras --- think of stereo cameras. > > - One camera and two flashes. I haven't seen any but I don't think > that's unthinkable. > > - It's not very nice of the ISP driver to just go and parse the > sensor's properties. > > - As the property is FIMC specific, the sensor DT node now carries FIMC > related information. > > A generic solution would be preferrable as this is not a FIMC related > problem. > > I have to admit that I can't think of a better solution right now than just > putting a list of the flash device phandles to the ISP device's DT node, and > then adding information on which sensor (numeric ID) the flash is related to > as an array. Better ideas would be welcome. > One reason why the flash sub-dev is registered by the sensor is the fact that a subdev has to be registered to make it available for use. The second reason is that it is physically connected with the sensor on the board via torchen/flashen traces. However it would be nice if the flash could be available for use even if its parent sensor driver isn't probed. There are also possible configurations where traces are routed through multiplexers and in such cases the sensor-flash relation is not fixed. I propose to introduce a "flash manager" which would maintain all the available flashes. V4L2 Flash sub-devices could register with it asynchronously. The flash manager could expose controls for configuring flash-sensor relations. In specific case a flash manager could be built upon a multiplexer device. This would suit me very well as I am currently facing such a configuration on another board. For time being I put gpios of a multiplexer to the flash DT node, but it doesn't reflect board configuration, where multiplexer is a separate device. I could try to implement the flash manager and submit an RFC. What is your opinion, does it make a sense? Regards, Jacek Anaszewski