From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oleksij Rempel Date: Wed, 30 Apr 2014 22:40:32 +0200 Subject: [ath9k-devel] Stable Version for ath9k_htc in AP Mode? In-Reply-To: <53615A14.6010601@rempel-privat.de> References: <2BDAE2F2-CAF2-4C43-9A80-9408F1A1AEA5@logicdatasystems.net> <535ED04D.709@rempel-privat.de> <535F472E.8030302@rempel-privat.de> <5361409B.9010406@rempel-privat.de> <53615A14.6010601@rempel-privat.de> Message-ID: <53615FC0.70507@rempel-privat.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Am 30.04.2014 22:16, schrieb Oleksij Rempel: > Am 30.04.2014 20:59, schrieb Aaron Hamilton: >> Unfortunately our units are in another state, so we're unable to make >> the electrical connections. If the UART is RS-232, we might be able to >> modify some locally - but it'll be a rather difficult challenge. > > It is TTL level, 3,3 Volt. > >> Not >> to mention, we see a great deal of issues in the field, but can't >> duplicate them here. > > Did you tried to grab hostpad log to so what kind of connections do you > have? What is your hostapd config? > >> On the firmware, I'm pulling down io_clean-2014.04.29 right now. I'm >> assuming this is what I should be using? > > You can use it, but these changes should make sense only if you can get > oops log from firmware. Or at least FW panic report from dmesg. > > Theoretically this change set should not affect stability. > >> Are there any other options for debugging aside from the UART? We're >> really in a bind and feel like the only work around is to setup a task >> to restart hostapd every hour. > > Hmm.. restarting hostpad should not affect firmware. Is it really > working for you? Make sure you have CONFIG_ATH_DEBUG enabled. May be we can get some interesting information. For example WMI timeouts are printed with ath_dbg which is disable without CONFIG_ATH_DEBUG. -- Regards, Oleksij -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 278 bytes Desc: OpenPGP digital signature Url : http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20140430/f37d507a/attachment.pgp