* [U-Boot] [i2c] Pull request
@ 2014-05-08 5:05 Heiko Schocher
2014-05-09 15:04 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-05-08 5:05 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git, thanks!
The following changes since commit 173d294b94cfec10063a5be40934d6d8fb7981ce:
Merge branch 'serial' of git://www.denx.de/git/u-boot-microblaze (2014-05-06 14:55:45 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 5146fc2b37a3098f0973b2f2339e069adfc7d272:
i2c: zynq: Fixed compilation errors when using DEBUG (2014-05-08 07:03:37 +0200)
----------------------------------------------------------------
Jesper B. Christensen (1):
i2c: zynq: Fixed compilation errors when using DEBUG
drivers/i2c/zynq_i2c.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-05-08 5:05 [U-Boot] [i2c] Pull request Heiko Schocher
@ 2014-05-09 15:04 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-05-09 15:04 UTC (permalink / raw)
To: u-boot
On Thu, May 08, 2014 at 07:05:40AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git, thanks!
>
> The following changes since commit 173d294b94cfec10063a5be40934d6d8fb7981ce:
>
> Merge branch 'serial' of git://www.denx.de/git/u-boot-microblaze (2014-05-06 14:55:45 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 5146fc2b37a3098f0973b2f2339e069adfc7d272:
>
> i2c: zynq: Fixed compilation errors when using DEBUG (2014-05-08 07:03:37 +0200)
>
> ----------------------------------------------------------------
> Jesper B. Christensen (1):
> i2c: zynq: Fixed compilation errors when using DEBUG
>
> drivers/i2c/zynq_i2c.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140509/a89ac1d1/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2015-03-18 8:18 Heiko Schocher
0 siblings, 0 replies; 71+ messages in thread
From: Heiko Schocher @ 2015-03-18 8:18 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git
The following changes since commit 052a681bae8ee91c9854089549b20c857d499fd7:
Prepare v2015.04-rc4 (2015-03-17 16:37:48 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to e6fbc3e4f1f2f974ec8efe9d52cfcb22b87f6294:
mv_i2c: fix warnings on 64-bit builds (2015-03-18 09:13:17 +0100)
----------------------------------------------------------------
Rob Herring (1):
mv_i2c: fix warnings on 64-bit builds
drivers/i2c/mv_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-12-08 6:29 Heiko Schocher
@ 2014-12-08 21:41 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-12-08 21:41 UTC (permalink / raw)
To: u-boot
On Mon, Dec 08, 2014 at 07:29:16AM +0100, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git
>
> The following changes since commit 97cdf64026c7d749dd7a5c0dbaba7a60a7292ac9:
>
> Merge branch 'sandbox' of git://git.denx.de/u-boot-x86 (2014-12-04 09:24:05 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to f4ed36964a7ab4e729d62e96dac15a674dcc2668:
>
> i2c: Correct spelling error (2014-12-08 07:27:22 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141208/319a1893/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2014-12-08 6:29 Heiko Schocher
2014-12-08 21:41 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-12-08 6:29 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git
The following changes since commit 97cdf64026c7d749dd7a5c0dbaba7a60a7292ac9:
Merge branch 'sandbox' of git://git.denx.de/u-boot-x86 (2014-12-04 09:24:05 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to f4ed36964a7ab4e729d62e96dac15a674dcc2668:
i2c: Correct spelling error (2014-12-08 07:27:22 +0100)
----------------------------------------------------------------
Mark Tomlinson (2):
i2c: Fix deselection of muxes
i2c: Correct spelling error
drivers/i2c/i2c_core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
[not found] <546C3DA0.7070300@denx.de>
@ 2014-11-20 14:16 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-11-20 14:16 UTC (permalink / raw)
To: u-boot
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 11/19/2014 01:50 AM, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git
>
> The following changes since commit
> 2086e388d56cbb0e3737a6276f04f00f74bf6723:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-11-14
> 16:39:32 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to c469703ba0e4adcd210e342fa6a19fcd83fe7207:
>
> blackfin: convert to use CONFIG_SYS_I2C framework (2014-11-17 08:10:37
> +0100)
>
> ----------------------------------------------------------------
> Scott Jiang (3):
> blackfin: rename bfin-twi_i2c driver to adi_i2c
> adi_i2c: convert to use general io accessors.
> blackfin: convert to use CONFIG_SYS_I2C framework
>
> drivers/i2c/Makefile | 2 +-
> drivers/i2c/adi_i2c.c | 305
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> drivers/i2c/bfin-twi_i2c.c | 379
> ----------------------------------------------------------------------------------------------------------------------------------------------
>
> include/configs/bct-brettl2.h | 4 +-
> include/configs/bf518f-ezbrd.h | 4 +-
> include/configs/bf526-ezbrd.h | 4 +-
> include/configs/bf527-ad7160-eval.h | 4 +-
> include/configs/bf527-ezkit.h | 4 +-
> include/configs/bf527-sdp.h | 4 +-
> include/configs/bf537-minotaur.h | 4 +-
> include/configs/bf537-pnav.h | 4 +-
> include/configs/bf537-srv1.h | 4 +-
> include/configs/bf537-stamp.h | 4 +-
> include/configs/bf538f-ezkit.h | 4 +-
> include/configs/bf548-ezkit.h | 4 +-
> include/configs/bf609-ezkit.h | 4 +-
> include/configs/bfin_adi_common.h | 4 +-
> include/configs/br4.h | 4 +-
> include/configs/cm-bf527.h | 4 +-
> include/configs/cm-bf537e.h | 4 +-
> include/configs/cm-bf537u.h | 4 +-
> include/configs/cm-bf548.h | 4 +-
> include/configs/pr1.h | 4 +-
> include/configs/tcm-bf518.h | 4 +-
> include/configs/tcm-bf537.h | 4 +-
> 25 files changed, 350 insertions(+), 424 deletions(-)
> create mode 100644 drivers/i2c/adi_i2c.c
> delete mode 100644 drivers/i2c/bfin-twi_i2c.c
Applied to u-boot/master, thanks!
- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=DAB/
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-11-10 7:41 Heiko Schocher
@ 2014-11-10 21:29 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-11-10 21:29 UTC (permalink / raw)
To: u-boot
On Mon, Nov 10, 2014 at 08:41:00AM +0100, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git
>
> The following changes since commit 11ada9225a16ed2d8ddbf0715a2416245a777cbc:
>
> Merge branch 'rmobile' of git://www.denx.de/git/u-boot-sh (2014-11-05 13:11:18 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to cd818a381ddcdc2440a167757394298f28b70240:
>
> i2c: rcar_i2c: Fix order of restart and clear status (2014-11-10 06:47:37 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141110/ad532a77/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2014-11-10 7:41 Heiko Schocher
2014-11-10 21:29 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-11-10 7:41 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git
The following changes since commit 11ada9225a16ed2d8ddbf0715a2416245a777cbc:
Merge branch 'rmobile' of git://www.denx.de/git/u-boot-sh (2014-11-05 13:11:18 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to cd818a381ddcdc2440a167757394298f28b70240:
i2c: rcar_i2c: Fix order of restart and clear status (2014-11-10 06:47:37 +0100)
----------------------------------------------------------------
Dirk Eibach (2):
ppc4xx: Fix i2c repeated start
ppc4xx: Handle i2c stuck on combined xfer
Nobuhiro Iwamatsu (1):
i2c: rcar_i2c: Fix order of restart and clear status
Shaveta Leekha (1):
drivers/i2c/fsl_i2c: Change CONFIG_I2C_TIMEOUT to 100ms
arch/powerpc/include/asm/ppc4xx-i2c.h | 2 ++
drivers/i2c/fsl_i2c.c | 2 +-
drivers/i2c/ppc4xx_i2c.c | 30 ++++++++++++++++++++++++++----
drivers/i2c/rcar_i2c.c | 4 ++--
4 files changed, 31 insertions(+), 7 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-10-29 9:43 Heiko Schocher
@ 2014-10-29 15:22 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-10-29 15:22 UTC (permalink / raw)
To: u-boot
On Wed, Oct 29, 2014 at 10:43:12AM +0100, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git
>
> The following changes since commit d58a9451e7339ed4cf2b2627e534611f427fb791:
>
> ppc/arm: zap EMK boards (2014-10-28 12:48:31 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 678398b19ee23ee5227074bc0d0e7c3925af815c:
>
> i2c: designware: Convert driver to multibus/multiadapter framework (2014-10-29 08:56:23 +0100)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141029/83fd9f2f/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2014-10-29 9:43 Heiko Schocher
2014-10-29 15:22 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-10-29 9:43 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git
The following changes since commit d58a9451e7339ed4cf2b2627e534611f427fb791:
ppc/arm: zap EMK boards (2014-10-28 12:48:31 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 678398b19ee23ee5227074bc0d0e7c3925af815c:
i2c: designware: Convert driver to multibus/multiadapter framework (2014-10-29 08:56:23 +0100)
----------------------------------------------------------------
Marek Vasut (4):
i2c: mxs: Consolidate hard-coded bus address
i2c: mxs: Add basic support for i2c framework
i2c: mxs: Pass the i2c_adapter around
i2c: mxs: Add support for I2C 1 on i.MX28
Stefan Roese (1):
i2c: designware: Convert driver to multibus/multiadapter framework
arch/arm/cpu/arm926ejs/spear/cpu.c | 2 +-
drivers/i2c/Makefile | 4 +--
drivers/i2c/designware_i2c.c | 293 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------------------------------------------------------
drivers/i2c/mxs_i2c.c | 187 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------------
include/configs/axs101.h | 9 ++++--
include/configs/mxs.h | 3 +-
include/configs/spear-common.h | 4 +--
include/configs/x600.h | 4 +--
8 files changed, 246 insertions(+), 260 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-07-16 5:16 Heiko Schocher
2014-07-16 6:47 ` Ian Campbell
@ 2014-07-21 20:44 ` Tom Rini
1 sibling, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-07-21 20:44 UTC (permalink / raw)
To: u-boot
On Wed, Jul 16, 2014 at 07:16:50AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git
>
> The following changes since commit 524123a70761110c5cf3ccc5f52f6d4da071b959:
>
> Prepare v2014.07 (2014-07-14 13:16:45 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to a17fd10fb516df3a0b00fcceb8678de2689951fc:
>
> fsl_i2c: add support for 3rd and 4th I2C (2014-07-16 05:19:15 +0200)
>
> ----------------------------------------------------------------
> Heiko Schocher (1):
> i2c, omap24xx: add i2c deblock sequenz
>
> Shengzhou Liu (1):
> fsl_i2c: add support for 3rd and 4th I2C
>
> drivers/i2c/fsl_i2c.c | 22 ++++++++++++++++++++--
> drivers/i2c/omap24xx_i2c.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 77 insertions(+), 2 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140721/8da320ea/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-07-16 8:04 ` Heiko Schocher
@ 2014-07-16 8:06 ` Ian Campbell
0 siblings, 0 replies; 71+ messages in thread
From: Ian Campbell @ 2014-07-16 8:06 UTC (permalink / raw)
To: u-boot
On Wed, 2014-07-16 at 10:04 +0200, Heiko Schocher wrote:
> Hello Ian,
>
> Am 16.07.2014 08:47, schrieb Ian Campbell:
> > On Wed, 2014-07-16 at 07:16 +0200, Heiko Schocher wrote:
> >
> > Hi Heiko,
> >
> > Are you going to take "mvtwsi: convert to CONFIG_SYS_I2C framework"[0]
> > or would you like me to push it via the sunxi tree? You've acked it but
> > it is delegated to me.
>
> as this patch is in a patchserie, I Acked it only ...
> So please pick this up, when you pick up the patchserie.
Will do.
> Thanks!
Thank you!
Cheers,
Ian.
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-07-16 6:47 ` Ian Campbell
@ 2014-07-16 8:04 ` Heiko Schocher
2014-07-16 8:06 ` Ian Campbell
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-07-16 8:04 UTC (permalink / raw)
To: u-boot
Hello Ian,
Am 16.07.2014 08:47, schrieb Ian Campbell:
> On Wed, 2014-07-16 at 07:16 +0200, Heiko Schocher wrote:
>
> Hi Heiko,
>
> Are you going to take "mvtwsi: convert to CONFIG_SYS_I2C framework"[0]
> or would you like me to push it via the sunxi tree? You've acked it but
> it is delegated to me.
as this patch is in a patchserie, I Acked it only ...
So please pick this up, when you pick up the patchserie.
Thanks!
bye,
Heiko
>
> Ian.
>
> [0] http://patchwork.ozlabs.org/patch/359689/
>
>
>
>
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-07-16 5:16 Heiko Schocher
@ 2014-07-16 6:47 ` Ian Campbell
2014-07-16 8:04 ` Heiko Schocher
2014-07-21 20:44 ` Tom Rini
1 sibling, 1 reply; 71+ messages in thread
From: Ian Campbell @ 2014-07-16 6:47 UTC (permalink / raw)
To: u-boot
On Wed, 2014-07-16 at 07:16 +0200, Heiko Schocher wrote:
Hi Heiko,
Are you going to take "mvtwsi: convert to CONFIG_SYS_I2C framework"[0]
or would you like me to push it via the sunxi tree? You've acked it but
it is delegated to me.
Ian.
[0] http://patchwork.ozlabs.org/patch/359689/
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2014-07-16 5:16 Heiko Schocher
2014-07-16 6:47 ` Ian Campbell
2014-07-21 20:44 ` Tom Rini
0 siblings, 2 replies; 71+ messages in thread
From: Heiko Schocher @ 2014-07-16 5:16 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git
The following changes since commit 524123a70761110c5cf3ccc5f52f6d4da071b959:
Prepare v2014.07 (2014-07-14 13:16:45 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to a17fd10fb516df3a0b00fcceb8678de2689951fc:
fsl_i2c: add support for 3rd and 4th I2C (2014-07-16 05:19:15 +0200)
----------------------------------------------------------------
Heiko Schocher (1):
i2c, omap24xx: add i2c deblock sequenz
Shengzhou Liu (1):
fsl_i2c: add support for 3rd and 4th I2C
drivers/i2c/fsl_i2c.c | 22 ++++++++++++++++++++--
drivers/i2c/omap24xx_i2c.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 77 insertions(+), 2 deletions(-)
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
[not found] <53BA9EB6.1020007@denx.de>
@ 2014-07-07 21:00 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-07-07 21:00 UTC (permalink / raw)
To: u-boot
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
[Mailing list was missing from the PR
On 07/07/2014 09:20 AM, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git
>
> The following changes since commit
> fe8b3212b7938861eacdefe6115810303a96f9cc:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-07-02
> 16:38:02 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to ad3091ad03e39f88c0bcc566c7a691c4475e2c40:
>
> i2c: tegra: dump alen in debug statements (2014-07-03 06:29:39 +0200)
>
> ----------------------------------------------------------------
> Stephen Warren (3):
> i2c: tegra: use repeated start for reads
> i2c: tegra: write clean data to TX FIFO
> i2c: tegra: dump alen in debug statements
>
> arch/arm/include/asm/arch-tegra/tegra_i2c.h | 2 ++
> drivers/i2c/tegra_i2c.c | 44
> +++++++++++++++++++++++++++-----------------
> 2 files changed, 29 insertions(+), 17 deletions(-)
Applied to u-boot/master, thanks!
- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/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=NBP8
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-06-12 9:44 Heiko Schocher
@ 2014-06-12 14:22 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-06-12 14:22 UTC (permalink / raw)
To: u-boot
On Thu, Jun 12, 2014 at 11:44:32AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git:
>
> The following changes since commit e153b13c8e300236e6d505bea629cc81fd0988cb:
>
> common/xyzModem.c: move empty statements to newline (2014-06-11 16:27:06 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 6736ec15c518d013263fa97fc48ca22a50753792:
>
> i2c: kona: Resolve Kona I2C driver issue (2014-06-12 11:42:50 +0200)
>
> ----------------------------------------------------------------
> Steve Rae (1):
> i2c: kona: Resolve Kona I2C driver issue
>
> drivers/i2c/kona_i2c.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140612/0e44062d/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2014-06-12 9:44 Heiko Schocher
2014-06-12 14:22 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-06-12 9:44 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git:
The following changes since commit e153b13c8e300236e6d505bea629cc81fd0988cb:
common/xyzModem.c: move empty statements to newline (2014-06-11 16:27:06 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 6736ec15c518d013263fa97fc48ca22a50753792:
i2c: kona: Resolve Kona I2C driver issue (2014-06-12 11:42:50 +0200)
----------------------------------------------------------------
Steve Rae (1):
i2c: kona: Resolve Kona I2C driver issue
drivers/i2c/kona_i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-05-14 11:46 Heiko Schocher
@ 2014-05-14 14:20 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-05-14 14:20 UTC (permalink / raw)
To: u-boot
On Wed, May 14, 2014 at 01:46:09PM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git, thanks!
>
> The following changes since commit 557a3319089499aa0e55d65a6b43b7137f362003:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-13 17:09:28 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 2072e7262965bb48d7fffb1e283101e6ed8b21a8:
>
> mvtwsi: Remove unnecessary twsi_baud_rate and twsi_slave_address globals (2014-05-14 12:59:12 +0200)
>
> ----------------------------------------------------------------
> Hans de Goede (2):
> mvtwsi: Fix clock programming
> mvtwsi: Remove unnecessary twsi_baud_rate and twsi_slave_address globals
>
> drivers/i2c/mvtwsi.c | 28 +++++-----------------------
> 1 file changed, 5 insertions(+), 23 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140514/a2d9a9b6/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2014-05-14 11:46 Heiko Schocher
2014-05-14 14:20 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-05-14 11:46 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git, thanks!
The following changes since commit 557a3319089499aa0e55d65a6b43b7137f362003:
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx (2014-05-13 17:09:28 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 2072e7262965bb48d7fffb1e283101e6ed8b21a8:
mvtwsi: Remove unnecessary twsi_baud_rate and twsi_slave_address globals (2014-05-14 12:59:12 +0200)
----------------------------------------------------------------
Hans de Goede (2):
mvtwsi: Fix clock programming
mvtwsi: Remove unnecessary twsi_baud_rate and twsi_slave_address globals
drivers/i2c/mvtwsi.c | 28 +++++-----------------------
1 file changed, 5 insertions(+), 23 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-04-29 6:49 Heiko Schocher
@ 2014-04-29 16:45 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-04-29 16:45 UTC (permalink / raw)
To: u-boot
On Tue, Apr 29, 2014 at 08:49:05AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git, thanks!
>
> The following changes since commit 8854070784450f7ade382c5792b2721fbe27315a:
>
> Merge branch 'master' of git://www.denx.de/git/u-boot-arc (2014-04-25 15:08:43 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to a405764c1ec835a41ccda943b9156aee25e15d5e:
>
> drivers/i2c/fsl_i2c: modify i2c_read to handle multi-byte write (2014-04-29 07:10:58 +0200)
>
> ----------------------------------------------------------------
> Shaveta Leekha (1):
> drivers/i2c/fsl_i2c: modify i2c_read to handle multi-byte write
>
> York Sun (1):
> driver/mxc_i2c: Move static data structure to global_data
>
> drivers/i2c/fsl_i2c.c | 41 ++++++++++++++++++++++++++++++++++-------
> drivers/i2c/mxc_i2c.c | 18 ++++++++----------
> include/asm-generic/global_data.h | 3 +++
> 3 files changed, 45 insertions(+), 17 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140429/0bd47191/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2014-04-29 6:49 Heiko Schocher
2014-04-29 16:45 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-04-29 6:49 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git, thanks!
The following changes since commit 8854070784450f7ade382c5792b2721fbe27315a:
Merge branch 'master' of git://www.denx.de/git/u-boot-arc (2014-04-25 15:08:43 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to a405764c1ec835a41ccda943b9156aee25e15d5e:
drivers/i2c/fsl_i2c: modify i2c_read to handle multi-byte write (2014-04-29 07:10:58 +0200)
----------------------------------------------------------------
Shaveta Leekha (1):
drivers/i2c/fsl_i2c: modify i2c_read to handle multi-byte write
York Sun (1):
driver/mxc_i2c: Move static data structure to global_data
drivers/i2c/fsl_i2c.c | 41 ++++++++++++++++++++++++++++++++++-------
drivers/i2c/mxc_i2c.c | 18 ++++++++----------
include/asm-generic/global_data.h | 3 +++
3 files changed, 45 insertions(+), 17 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-03-31 5:35 Heiko Schocher
@ 2014-03-31 12:32 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-03-31 12:32 UTC (permalink / raw)
To: u-boot
On Mon, Mar 31, 2014 at 07:35:51AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git, thanks!
>
> The following changes since commit 0b2da7e209f4110b7c81d578336a10330e4a4404:
>
> blackfin: mmc: Correct mmc_host_is_spi and bfin_sdh.c (2014-03-28 16:55:29 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 462d1883f78353c5ed9d09de45a9b5b2422793a3:
>
> drivers: i2c: delete an unused source file (2014-03-31 07:30:55 +0200)
>
> ----------------------------------------------------------------
> Masahiro Yamada (1):
> drivers: i2c: delete an unused source file
>
> drivers/i2c/adi_i2c.c | 387 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> 1 file changed, 387 deletions(-)
> delete mode 100644 drivers/i2c/adi_i2c.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140331/a6187162/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2014-03-31 5:35 Heiko Schocher
2014-03-31 12:32 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-03-31 5:35 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git, thanks!
The following changes since commit 0b2da7e209f4110b7c81d578336a10330e4a4404:
blackfin: mmc: Correct mmc_host_is_spi and bfin_sdh.c (2014-03-28 16:55:29 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 462d1883f78353c5ed9d09de45a9b5b2422793a3:
drivers: i2c: delete an unused source file (2014-03-31 07:30:55 +0200)
----------------------------------------------------------------
Masahiro Yamada (1):
drivers: i2c: delete an unused source file
drivers/i2c/adi_i2c.c | 387 --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1 file changed, 387 deletions(-)
delete mode 100644 drivers/i2c/adi_i2c.c
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-02-20 13:05 ` Heiko Schocher
@ 2014-02-20 17:17 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2014-02-20 17:17 UTC (permalink / raw)
To: u-boot
On Thu, Feb 20, 2014 at 02:05:54PM +0100, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git, thanks!
>
> The following changes since commit 0a8e823ad0c5a602c93c2e8a54caf622ade6d3fb:
>
> Prepare v2014.04-rc1 (2014-02-19 16:01:28 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 39abd65c342a271d39fa580dc4c5cb7fce516ef3:
>
> arc: remove "hardware.h" (2014-02-20 06:49:19 +0100)
>
> ----------------------------------------------------------------
> Alexey Brodkin (3):
> spear: move CONFIG_SYS_I2C_BASE from arch-spear/hardware to board configs
> designware_i2c: remove inclusion of <asm/arch/hardware.h>
> arc: remove "hardware.h"
>
> Chin Liang See (1):
> designware_i2c: Enhance DesignWare I2C driver address support
>
> Hannes Petermaier (1):
> OMAP24xx I2C: Add support for set-speed
>
> Heiko Schocher (1):
> i2c, bootcount: add support for bootcounter on i2c devices
>
> Marek Vasut (1):
> i2c: i2c-mxs: Wait for I2C to empty queue
>
> Michael Burr (2):
> i2c: zynq: Support for 0-length register address
> i2c: zynq: Add support for the second i2c controller
>
> Scott Jiang (1):
> blackfin: make i2c driver blackfin independant
>
> Sonic Zhang (3):
> blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024
> blackfin: add spi and i2c specific get clock functions
> blackfin: rename bfin-twi_i2c driver to adi_i2c
>
> README | 20 +++++++++
> arch/arc/include/asm/arch-arc700/hardware.h | 10 -----
> arch/arm/include/asm/arch-spear/hardware.h | 4 --
> arch/blackfin/include/asm/blackfin_local.h | 7 ---
> arch/blackfin/include/asm/clock.h | 11 +++++
> arch/blackfin/include/asm/twi.h | 15 +++++++
> drivers/bootcount/Makefile | 1 +
> drivers/bootcount/bootcount_i2c.c | 44 +++++++++++++++++++
> drivers/i2c/adi_i2c.c | 387 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/i2c/bfin-twi_i2c.c | 3 +-
> drivers/i2c/designware_i2c.c | 42 ++++--------------
> drivers/i2c/mxs_i2c.c | 39 ++++++++++++++---
> drivers/i2c/omap24xx_i2c.c | 147 +++++++++++++++++++++++++++++++++++++++++----------------------
> drivers/i2c/zynq_i2c.c | 82 ++++++++++++++++++++---------------
> drivers/spi/bfin_spi.c | 7 +--
> drivers/spi/bfin_spi6xx.c | 7 +--
> include/configs/spear-common.h | 9 ++++
> include/configs/x600.h | 1 +
> include/configs/zynq-common.h | 6 +--
> include/i2c.h | 1 +
> 20 files changed, 688 insertions(+), 155 deletions(-)
> delete mode 100644 arch/arc/include/asm/arch-arc700/hardware.h
> create mode 100644 arch/blackfin/include/asm/twi.h
> create mode 100644 drivers/bootcount/bootcount_i2c.c
> create mode 100644 drivers/i2c/adi_i2c.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140220/746b619a/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
[not found] <52E9F338.70900@denx.de>
@ 2014-02-20 13:05 ` Heiko Schocher
2014-02-20 17:17 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-02-20 13:05 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git, thanks!
The following changes since commit 0a8e823ad0c5a602c93c2e8a54caf622ade6d3fb:
Prepare v2014.04-rc1 (2014-02-19 16:01:28 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 39abd65c342a271d39fa580dc4c5cb7fce516ef3:
arc: remove "hardware.h" (2014-02-20 06:49:19 +0100)
----------------------------------------------------------------
Alexey Brodkin (3):
spear: move CONFIG_SYS_I2C_BASE from arch-spear/hardware to board configs
designware_i2c: remove inclusion of <asm/arch/hardware.h>
arc: remove "hardware.h"
Chin Liang See (1):
designware_i2c: Enhance DesignWare I2C driver address support
Hannes Petermaier (1):
OMAP24xx I2C: Add support for set-speed
Heiko Schocher (1):
i2c, bootcount: add support for bootcounter on i2c devices
Marek Vasut (1):
i2c: i2c-mxs: Wait for I2C to empty queue
Michael Burr (2):
i2c: zynq: Support for 0-length register address
i2c: zynq: Add support for the second i2c controller
Scott Jiang (1):
blackfin: make i2c driver blackfin independant
Sonic Zhang (3):
blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024
blackfin: add spi and i2c specific get clock functions
blackfin: rename bfin-twi_i2c driver to adi_i2c
README | 20 +++++++++
arch/arc/include/asm/arch-arc700/hardware.h | 10 -----
arch/arm/include/asm/arch-spear/hardware.h | 4 --
arch/blackfin/include/asm/blackfin_local.h | 7 ---
arch/blackfin/include/asm/clock.h | 11 +++++
arch/blackfin/include/asm/twi.h | 15 +++++++
drivers/bootcount/Makefile | 1 +
drivers/bootcount/bootcount_i2c.c | 44 +++++++++++++++++++
drivers/i2c/adi_i2c.c | 387 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/i2c/bfin-twi_i2c.c | 3 +-
drivers/i2c/designware_i2c.c | 42 ++++--------------
drivers/i2c/mxs_i2c.c | 39 ++++++++++++++---
drivers/i2c/omap24xx_i2c.c | 147 +++++++++++++++++++++++++++++++++++++++++----------------------
drivers/i2c/zynq_i2c.c | 82 ++++++++++++++++++++---------------
drivers/spi/bfin_spi.c | 7 +--
drivers/spi/bfin_spi6xx.c | 7 +--
include/configs/spear-common.h | 9 ++++
include/configs/x600.h | 1 +
include/configs/zynq-common.h | 6 +--
include/i2c.h | 1 +
20 files changed, 688 insertions(+), 155 deletions(-)
delete mode 100644 arch/arc/include/asm/arch-arc700/hardware.h
create mode 100644 arch/blackfin/include/asm/twi.h
create mode 100644 drivers/bootcount/bootcount_i2c.c
create mode 100644 drivers/i2c/adi_i2c.c
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-01-20 9:34 ` Alexey Brodkin
@ 2014-01-20 9:41 ` Michal Simek
0 siblings, 0 replies; 71+ messages in thread
From: Michal Simek @ 2014-01-20 9:41 UTC (permalink / raw)
To: u-boot
On 01/20/2014 10:34 AM, Alexey Brodkin wrote:
> On Mon, 2014-01-20 at 10:24 +0100, Michal Simek wrote:
>> Hi Tom,
>>
>> look below.
>>
>> On 01/18/2014 08:28 AM, Heiko Schocher wrote:
>>> Hello Tom,
>>>
>>> please pull some small fixes from u-boot-i2c.git
>>>
>>> Thanks!
>>>
>>> The following changes since commit 7f673c99c2d8d1aa21996c5b914f06d784b080ca:
>>>
>>> Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-01-10 10:56:00 -0500)
>>>
>>> are available in the git repository at:
>>>
>>>
>>> git://git.denx.de/u-boot-i2c.git master
>>>
>>> for you to fetch changes up to 8e0b3c020057b3f7345b6696029a80eaf162e7f3:
>>>
>>> i2c: zynq: Add support for the second i2c controller (2014-01-13 09:06:08 +0100)
>>>
>>> ----------------------------------------------------------------
>>> Alexey Brodkin (2):
>>> env_eeprom - fix bus recovery for "eeprom_bus_read"
>>> drivers/designware_i2c - add suppor of CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
>>>
>>> Darwin Rambo (1):
>>> i2c: Fix i2c speed command
>>>
>>> Hisashi Nakamura (1):
>>> rcar_i2c: Fix receiving wait condition
>>>
>>> Kuo-Jung Su (1):
>>> i2c: fti2c010: fix compiler warning on paddr[]
>>>
>>> Michael Burr (2):
>>> i2c: zynq: Support for 0-length register address
>>
>> I have found that I cherry-picked this patch incorrectly from origin one
>> and it is breaking current functionality.
>> I have already sent email to Heiko that this is patch is wrong.
>>
>> I don't know if Heiko wants to send new pull request or you can
>> just remove that 2 patches on the top of Heiko's tree.
>
> Hi Michal,
>
> could you please clarify which particular patches from mentioned
> pull-request break current functionality?
This one: "i2c: zynq: Support for 0-length register address"
It is not your fault just mine. I wrongly resolved conflicts
which there was and I don't know why testing passed in that time.
(I probably tested any incorrect version).
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140120/5b90c6ae/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-01-20 9:24 ` Michal Simek
@ 2014-01-20 9:34 ` Alexey Brodkin
2014-01-20 9:41 ` Michal Simek
0 siblings, 1 reply; 71+ messages in thread
From: Alexey Brodkin @ 2014-01-20 9:34 UTC (permalink / raw)
To: u-boot
On Mon, 2014-01-20 at 10:24 +0100, Michal Simek wrote:
> Hi Tom,
>
> look below.
>
> On 01/18/2014 08:28 AM, Heiko Schocher wrote:
> > Hello Tom,
> >
> > please pull some small fixes from u-boot-i2c.git
> >
> > Thanks!
> >
> > The following changes since commit 7f673c99c2d8d1aa21996c5b914f06d784b080ca:
> >
> > Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-01-10 10:56:00 -0500)
> >
> > are available in the git repository at:
> >
> >
> > git://git.denx.de/u-boot-i2c.git master
> >
> > for you to fetch changes up to 8e0b3c020057b3f7345b6696029a80eaf162e7f3:
> >
> > i2c: zynq: Add support for the second i2c controller (2014-01-13 09:06:08 +0100)
> >
> > ----------------------------------------------------------------
> > Alexey Brodkin (2):
> > env_eeprom - fix bus recovery for "eeprom_bus_read"
> > drivers/designware_i2c - add suppor of CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
> >
> > Darwin Rambo (1):
> > i2c: Fix i2c speed command
> >
> > Hisashi Nakamura (1):
> > rcar_i2c: Fix receiving wait condition
> >
> > Kuo-Jung Su (1):
> > i2c: fti2c010: fix compiler warning on paddr[]
> >
> > Michael Burr (2):
> > i2c: zynq: Support for 0-length register address
>
> I have found that I cherry-picked this patch incorrectly from origin one
> and it is breaking current functionality.
> I have already sent email to Heiko that this is patch is wrong.
>
> I don't know if Heiko wants to send new pull request or you can
> just remove that 2 patches on the top of Heiko's tree.
Hi Michal,
could you please clarify which particular patches from mentioned
pull-request break current functionality?
-Alexey
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2014-01-18 7:28 Heiko Schocher
@ 2014-01-20 9:24 ` Michal Simek
2014-01-20 9:34 ` Alexey Brodkin
0 siblings, 1 reply; 71+ messages in thread
From: Michal Simek @ 2014-01-20 9:24 UTC (permalink / raw)
To: u-boot
Hi Tom,
look below.
On 01/18/2014 08:28 AM, Heiko Schocher wrote:
> Hello Tom,
>
> please pull some small fixes from u-boot-i2c.git
>
> Thanks!
>
> The following changes since commit 7f673c99c2d8d1aa21996c5b914f06d784b080ca:
>
> Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-01-10 10:56:00 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 8e0b3c020057b3f7345b6696029a80eaf162e7f3:
>
> i2c: zynq: Add support for the second i2c controller (2014-01-13 09:06:08 +0100)
>
> ----------------------------------------------------------------
> Alexey Brodkin (2):
> env_eeprom - fix bus recovery for "eeprom_bus_read"
> drivers/designware_i2c - add suppor of CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
>
> Darwin Rambo (1):
> i2c: Fix i2c speed command
>
> Hisashi Nakamura (1):
> rcar_i2c: Fix receiving wait condition
>
> Kuo-Jung Su (1):
> i2c: fti2c010: fix compiler warning on paddr[]
>
> Michael Burr (2):
> i2c: zynq: Support for 0-length register address
I have found that I cherry-picked this patch incorrectly from origin one
and it is breaking current functionality.
I have already sent email to Heiko that this is patch is wrong.
I don't know if Heiko wants to send new pull request or you can
just remove that 2 patches on the top of Heiko's tree.
Sorry for inconvenience.
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140120/1b6a3939/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2014-01-18 7:28 Heiko Schocher
2014-01-20 9:24 ` Michal Simek
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2014-01-18 7:28 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull some small fixes from u-boot-i2c.git
Thanks!
The following changes since commit 7f673c99c2d8d1aa21996c5b914f06d784b080ca:
Merge branch 'master' of git://git.denx.de/u-boot-arm (2014-01-10 10:56:00 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 8e0b3c020057b3f7345b6696029a80eaf162e7f3:
i2c: zynq: Add support for the second i2c controller (2014-01-13 09:06:08 +0100)
----------------------------------------------------------------
Alexey Brodkin (2):
env_eeprom - fix bus recovery for "eeprom_bus_read"
drivers/designware_i2c - add suppor of CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
Darwin Rambo (1):
i2c: Fix i2c speed command
Hisashi Nakamura (1):
rcar_i2c: Fix receiving wait condition
Kuo-Jung Su (1):
i2c: fti2c010: fix compiler warning on paddr[]
Michael Burr (2):
i2c: zynq: Support for 0-length register address
i2c: zynq: Add support for the second i2c controller
Nobuhiro Iwamatsu (1):
rcar_i2c: Clear status before start master receive
common/env_eeprom.c | 5 ++---
drivers/i2c/designware_i2c.c | 38 ++++++++++++++++++++++++++++++++++++++
drivers/i2c/fti2c010.c | 4 ++--
drivers/i2c/i2c_core.c | 2 +-
drivers/i2c/rcar_i2c.c | 6 ++++--
drivers/i2c/zynq_i2c.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------------
include/configs/zynq-common.h | 5 ++---
include/configs/zynq_zc70x.h | 2 +-
8 files changed, 103 insertions(+), 38 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2013-12-09 7:00 Heiko Schocher
@ 2013-12-11 16:44 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2013-12-11 16:44 UTC (permalink / raw)
To: u-boot
On Mon, Dec 09, 2013 at 08:00:15AM +0100, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git.
>
> The following changes since commit f44483b57c49282299da0e5c10073b909cdad979:
>
> Merge branch 'serial' of git://git.denx.de/u-boot-microblaze (2013-12-02 08:48:02 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to e717fc6d1a2b459ae8352f7af5945cc0c216ab1e:
>
> i2c: samsung: register i2c busses for Exynso5420 and Exynos5250 (2013-12-06 07:46:23 +0100)
>
> ----------------------------------------------------------------
> Kuo-Jung Su (4):
> i2c: fti2c010: cosmetic: coding style cleanup
> i2c: fti2c010: migrate to new i2c model
> i2c: fti2c010: serial out r/w address in MSB order
> cmd_eeprom: bug fix for i2c read/write
>
> Naveen Krishna Ch (1):
> i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
>
> Nikita Kiryanov (1):
> arm: omap: i2c: don't zero cnt in i2c_write
>
> Piotr Wilczek (2):
> driver:i2c:s3c24x0: adapt driver to new i2c
> driver:i2c:s3c24x0: fix clock init for hsi2c
>
> README | 6 +++
> board/samsung/smdk5250/exynos5-dt.c | 2 -
> board/samsung/trats/trats.c | 21 ++++++----
> board/samsung/trats2/trats2.c | 35 +++++++++++++---
> common/cmd_eeprom.c | 4 +-
> drivers/i2c/Makefile | 2 +-
> drivers/i2c/fti2c010.c | 352 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------------------------------------------------
> drivers/i2c/omap24xx_i2c.c | 6 ---
> drivers/i2c/s3c24x0_i2c.c | 284 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------------
> include/configs/VCMA9.h | 8 ++--
> include/configs/arndale.h | 9 ++--
> include/configs/exynos5250-dt.h | 8 ++--
> include/configs/trats.h | 25 ++++--------
> include/configs/trats2.h | 29 ++++++-------
> 14 files changed, 474 insertions(+), 317 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131211/afe90eb7/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2013-12-09 7:00 Heiko Schocher
2013-12-11 16:44 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2013-12-09 7:00 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git.
The following changes since commit f44483b57c49282299da0e5c10073b909cdad979:
Merge branch 'serial' of git://git.denx.de/u-boot-microblaze (2013-12-02 08:48:02 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to e717fc6d1a2b459ae8352f7af5945cc0c216ab1e:
i2c: samsung: register i2c busses for Exynso5420 and Exynos5250 (2013-12-06 07:46:23 +0100)
----------------------------------------------------------------
Kuo-Jung Su (4):
i2c: fti2c010: cosmetic: coding style cleanup
i2c: fti2c010: migrate to new i2c model
i2c: fti2c010: serial out r/w address in MSB order
cmd_eeprom: bug fix for i2c read/write
Naveen Krishna Ch (1):
i2c: samsung: register i2c busses for Exynso5420 and Exynos5250
Nikita Kiryanov (1):
arm: omap: i2c: don't zero cnt in i2c_write
Piotr Wilczek (2):
driver:i2c:s3c24x0: adapt driver to new i2c
driver:i2c:s3c24x0: fix clock init for hsi2c
README | 6 +++
board/samsung/smdk5250/exynos5-dt.c | 2 -
board/samsung/trats/trats.c | 21 ++++++----
board/samsung/trats2/trats2.c | 35 +++++++++++++---
common/cmd_eeprom.c | 4 +-
drivers/i2c/Makefile | 2 +-
drivers/i2c/fti2c010.c | 352 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------------------------------------------------------------
drivers/i2c/omap24xx_i2c.c | 6 ---
drivers/i2c/s3c24x0_i2c.c | 284 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------------
include/configs/VCMA9.h | 8 ++--
include/configs/arndale.h | 9 ++--
include/configs/exynos5250-dt.h | 8 ++--
include/configs/trats.h | 25 ++++--------
include/configs/trats2.h | 29 ++++++-------
14 files changed, 474 insertions(+), 317 deletions(-)
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2013-11-13 6:41 Heiko Schocher
@ 2013-11-17 19:16 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2013-11-17 19:16 UTC (permalink / raw)
To: u-boot
On Wed, Nov 13, 2013 at 07:41:49AM +0100, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git:
>
> The following changes since commit 63c4f17b2f8017d22241522a48c765073b8791b0:
>
> cm_t35: use scf0403 driver (2013-11-12 10:12:07 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to f9de54e9b09b4836fb3cda9d98a6dfba367b9734:
>
> designware_i2c: remove 10msec delay in i2c_xfer_finish (2013-11-13 06:22:41 +0100)
>
> ----------------------------------------------------------------
> Alexey Brodkin (3):
> cmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROM
> designware_i2c: disable i2c controller during target address setup
> designware_i2c: remove 10msec delay in i2c_xfer_finish
>
> Heiko Schocher (3):
> i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
> i2c, zynq: convert zynq i2c driver to new multibus/multiadapter framework
> i2c, omap1510: remove i2c driver
>
> Marek Vasut (1):
> i2c: mxs_i2c: Squash endless loop
>
> Nobuhiro Iwamatsu (1):
> i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework
>
> README | 36 ++++++++++++++++++
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 3 +-
> arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 4 ++
> arch/arm/cpu/armv7/omap3/board.c | 2 +-
> arch/arm/cpu/armv7/omap3/clock.c | 2 +-
> arch/arm/include/asm/arch-am33xx/i2c.h | 6 +--
> board/compulab/cm_t35/cm_t35.c | 2 +-
> board/compulab/common/Makefile | 2 +-
> board/compulab/common/eeprom.h | 2 +-
> board/kmc/kzm9g/kzm9g.c | 1 -
> board/logicpd/am3517evm/am3517evm.c | 4 +-
> board/overo/overo.c | 2 +-
> board/phytec/pcm051/board.c | 4 +-
> board/renesas/ecovec/ecovec.c | 3 +-
> board/siemens/common/board.c | 4 +-
> board/ti/am335x/board.c | 2 +-
> board/ti/am3517crane/am3517crane.c | 4 +-
> board/ti/evm/evm.c | 4 +-
> common/cmd_eeprom.c | 4 +-
> drivers/i2c/Makefile | 9 ++---
> drivers/i2c/designware_i2c.c | 15 ++++++--
> drivers/i2c/mxs_i2c.c | 15 ++++++--
> drivers/i2c/omap1510_i2c.c | 277 ------------------------------------------------------------------------------------------------------------------------------------------
> drivers/i2c/omap24xx_i2c.c | 172 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------------------
> drivers/i2c/sh_i2c.c | 294 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------------------------------------------------------
> drivers/i2c/zynq_i2c.c | 29 ++++++++-------
> include/configs/am335x_evm.h | 1 -
> include/configs/am3517_crane.h | 8 ++--
> include/configs/am3517_evm.h | 8 ++--
> include/configs/cm_t35.h | 8 ++--
> include/configs/devkit8000.h | 8 ++--
> include/configs/dig297.h | 8 ++--
> include/configs/ecovec.h | 15 ++++----
> include/configs/kzm9g.h | 31 ++++++++--------
> include/configs/mcx.h | 8 ++--
> include/configs/nokia_rx51.h | 8 ++--
> include/configs/omap3_beagle.h | 9 ++---
> include/configs/omap3_evm_common.h | 9 ++---
> include/configs/omap3_igep00x0.h | 8 ++--
> include/configs/omap3_logic.h | 10 ++---
> include/configs/omap3_mvblx.h | 9 ++---
> include/configs/omap3_overo.h | 9 ++---
> include/configs/omap3_pandora.h | 8 ++--
> include/configs/omap3_sdp3430.h | 8 ++--
> include/configs/omap3_zoom1.h | 8 ++--
> include/configs/omap3_zoom2.h | 8 ++--
> include/configs/pcm051.h | 9 ++---
> include/configs/siemens-am33x-common.h | 9 ++---
> include/configs/tam3517-common.h | 11 +++---
> include/configs/ti_armv7_common.h | 9 ++---
> include/configs/tricorder.h | 10 ++---
> include/configs/zynq.h | 8 ++--
> 52 files changed, 465 insertions(+), 682 deletions(-)
> delete mode 100644 drivers/i2c/omap1510_i2c.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131117/abdfc436/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2013-11-13 6:41 Heiko Schocher
2013-11-17 19:16 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2013-11-13 6:41 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git:
The following changes since commit 63c4f17b2f8017d22241522a48c765073b8791b0:
cm_t35: use scf0403 driver (2013-11-12 10:12:07 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to f9de54e9b09b4836fb3cda9d98a6dfba367b9734:
designware_i2c: remove 10msec delay in i2c_xfer_finish (2013-11-13 06:22:41 +0100)
----------------------------------------------------------------
Alexey Brodkin (3):
cmd_eeprom: fix i2c_{read|write} usage if env is in I2C EEPROM
designware_i2c: disable i2c controller during target address setup
designware_i2c: remove 10msec delay in i2c_xfer_finish
Heiko Schocher (3):
i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
i2c, zynq: convert zynq i2c driver to new multibus/multiadapter framework
i2c, omap1510: remove i2c driver
Marek Vasut (1):
i2c: mxs_i2c: Squash endless loop
Nobuhiro Iwamatsu (1):
i2c: sh_i2c: Update to new CONFIG_SYS_I2C framework
README | 36 ++++++++++++++++++
arch/arm/cpu/armv7/omap-common/clocks-common.c | 3 +-
arch/arm/cpu/armv7/omap-common/u-boot-spl.lds | 4 ++
arch/arm/cpu/armv7/omap3/board.c | 2 +-
arch/arm/cpu/armv7/omap3/clock.c | 2 +-
arch/arm/include/asm/arch-am33xx/i2c.h | 6 +--
board/compulab/cm_t35/cm_t35.c | 2 +-
board/compulab/common/Makefile | 2 +-
board/compulab/common/eeprom.h | 2 +-
board/kmc/kzm9g/kzm9g.c | 1 -
board/logicpd/am3517evm/am3517evm.c | 4 +-
board/overo/overo.c | 2 +-
board/phytec/pcm051/board.c | 4 +-
board/renesas/ecovec/ecovec.c | 3 +-
board/siemens/common/board.c | 4 +-
board/ti/am335x/board.c | 2 +-
board/ti/am3517crane/am3517crane.c | 4 +-
board/ti/evm/evm.c | 4 +-
common/cmd_eeprom.c | 4 +-
drivers/i2c/Makefile | 9 ++---
drivers/i2c/designware_i2c.c | 15 ++++++--
drivers/i2c/mxs_i2c.c | 15 ++++++--
drivers/i2c/omap1510_i2c.c | 277 ------------------------------------------------------------------------------------------------------------------------------------------
drivers/i2c/omap24xx_i2c.c | 172 ++++++++++++++++++++++++++++++++++++++++++++++++++++++--------------------------------
drivers/i2c/sh_i2c.c | 294 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------------------------------------------------------
drivers/i2c/zynq_i2c.c | 29 ++++++++-------
include/configs/am335x_evm.h | 1 -
include/configs/am3517_crane.h | 8 ++--
include/configs/am3517_evm.h | 8 ++--
include/configs/cm_t35.h | 8 ++--
include/configs/devkit8000.h | 8 ++--
include/configs/dig297.h | 8 ++--
include/configs/ecovec.h | 15 ++++----
include/configs/kzm9g.h | 31 ++++++++--------
include/configs/mcx.h | 8 ++--
include/configs/nokia_rx51.h | 8 ++--
include/configs/omap3_beagle.h | 9 ++---
include/configs/omap3_evm_common.h | 9 ++---
include/configs/omap3_igep00x0.h | 8 ++--
include/configs/omap3_logic.h | 10 ++---
include/configs/omap3_mvblx.h | 9 ++---
include/configs/omap3_overo.h | 9 ++---
include/configs/omap3_pandora.h | 8 ++--
include/configs/omap3_sdp3430.h | 8 ++--
include/configs/omap3_zoom1.h | 8 ++--
include/configs/omap3_zoom2.h | 8 ++--
include/configs/pcm051.h | 9 ++---
include/configs/siemens-am33x-common.h | 9 ++---
include/configs/tam3517-common.h | 11 +++---
include/configs/ti_armv7_common.h | 9 ++---
include/configs/tricorder.h | 10 ++---
include/configs/zynq.h | 8 ++--
52 files changed, 465 insertions(+), 682 deletions(-)
delete mode 100644 drivers/i2c/omap1510_i2c.c
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2013-10-17 6:48 Heiko Schocher
@ 2013-10-24 1:21 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2013-10-24 1:21 UTC (permalink / raw)
To: u-boot
On Thu, Oct 17, 2013 at 08:48:50AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git:
>
> The following changes since commit 183acb700378a8cfc5d50a01a65de93fb2c24586:
>
> Prepare v2013.10 (2013-10-16 13:08:12 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 9a2a73d29fa395f42f3fb477ac99dda4d7f2f21f:
>
> i2c: eliminate warnings in i2c_reloc_fixup function (2013-10-17 07:24:41 +0200)
>
> ----------------------------------------------------------------
> Heiko Schocher (1):
> i2c, core: optimze i2c_set_bus_num()
>
> Jens Scharsig (BuS Elektronik) (1):
> Fix: nommu I2C adapter relocation error
>
> Masahiro Yamada (1):
> i2c: eliminate warnings in i2c_reloc_fixup function
>
> Michael Burr (1):
> i2c: Zynq: Support for TI PCA9548 bus multiplexer
>
> Naveen Krishna Ch (2):
> exynos: i2c: Fix i2c driver to handle NACKs properly
> i2c: s3c24xx: add hsi2c controller support
>
> Nobuhiro Iwamatsu (3):
> i2c: Add support for Renesas rcar
> i2c: sh_i2c: Avoid using I2C prior to relocation
> README: I2C: Fix indent
>
> Simon Glass (1):
> exynos: i2c: Change FDT bus setup code to enumerate ports correctly
>
> trem (3):
> i2c: fix init on generic board
> i2c: mxc: move to new subsystem
> i2c: update config using mxc driver to new subsystem
>
> README | 31 +++++-
> arch/arm/cpu/armv7/mx5/clock.c | 2 +-
> arch/arm/cpu/armv7/mx6/clock.c | 2 +-
> arch/arm/imx-common/Makefile | 2 +-
> common/board_f.c | 4 +
> drivers/i2c/Makefile | 3 +-
> drivers/i2c/i2c_core.c | 39 +++----
> drivers/i2c/mxc_i2c.c | 137 +++++++++++++-----------
> drivers/i2c/rcar_i2c.c | 288 +++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/i2c/s3c24x0_i2c.c | 835 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------
> drivers/i2c/s3c24x0_i2c.h | 38 +++++++
> drivers/i2c/sh_i2c.c | 10 +-
> include/configs/apf27.h | 11 +-
> include/configs/flea3.h | 9 +-
> include/configs/imx31_phycore.h | 7 +-
> include/configs/m53evk.h | 7 +-
> include/configs/mx25pdk.h | 7 +-
> include/configs/mx35pdk.h | 7 +-
> include/configs/mx53ard.h | 7 +-
> include/configs/mx53evk.h | 7 +-
> include/configs/mx53loco.h | 7 +-
> include/configs/mx53smd.h | 7 +-
> include/configs/mx6qsabreauto.h | 4 +-
> include/configs/nitrogen6x.h | 4 +-
> include/configs/titanium.h | 4 +-
> include/configs/vf610twr.h | 7 +-
> include/configs/woodburn_common.h | 7 +-
> include/i2c.h | 2 +
> 28 files changed, 1187 insertions(+), 308 deletions(-)
> create mode 100644 drivers/i2c/rcar_i2c.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131023/12cc2c8e/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2013-10-17 6:48 Heiko Schocher
2013-10-24 1:21 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2013-10-17 6:48 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git:
The following changes since commit 183acb700378a8cfc5d50a01a65de93fb2c24586:
Prepare v2013.10 (2013-10-16 13:08:12 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 9a2a73d29fa395f42f3fb477ac99dda4d7f2f21f:
i2c: eliminate warnings in i2c_reloc_fixup function (2013-10-17 07:24:41 +0200)
----------------------------------------------------------------
Heiko Schocher (1):
i2c, core: optimze i2c_set_bus_num()
Jens Scharsig (BuS Elektronik) (1):
Fix: nommu I2C adapter relocation error
Masahiro Yamada (1):
i2c: eliminate warnings in i2c_reloc_fixup function
Michael Burr (1):
i2c: Zynq: Support for TI PCA9548 bus multiplexer
Naveen Krishna Ch (2):
exynos: i2c: Fix i2c driver to handle NACKs properly
i2c: s3c24xx: add hsi2c controller support
Nobuhiro Iwamatsu (3):
i2c: Add support for Renesas rcar
i2c: sh_i2c: Avoid using I2C prior to relocation
README: I2C: Fix indent
Simon Glass (1):
exynos: i2c: Change FDT bus setup code to enumerate ports correctly
trem (3):
i2c: fix init on generic board
i2c: mxc: move to new subsystem
i2c: update config using mxc driver to new subsystem
README | 31 +++++-
arch/arm/cpu/armv7/mx5/clock.c | 2 +-
arch/arm/cpu/armv7/mx6/clock.c | 2 +-
arch/arm/imx-common/Makefile | 2 +-
common/board_f.c | 4 +
drivers/i2c/Makefile | 3 +-
drivers/i2c/i2c_core.c | 39 +++----
drivers/i2c/mxc_i2c.c | 137 +++++++++++++-----------
drivers/i2c/rcar_i2c.c | 288 +++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/i2c/s3c24x0_i2c.c | 835 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------
drivers/i2c/s3c24x0_i2c.h | 38 +++++++
drivers/i2c/sh_i2c.c | 10 +-
include/configs/apf27.h | 11 +-
include/configs/flea3.h | 9 +-
include/configs/imx31_phycore.h | 7 +-
include/configs/m53evk.h | 7 +-
include/configs/mx25pdk.h | 7 +-
include/configs/mx35pdk.h | 7 +-
include/configs/mx53ard.h | 7 +-
include/configs/mx53evk.h | 7 +-
include/configs/mx53loco.h | 7 +-
include/configs/mx53smd.h | 7 +-
include/configs/mx6qsabreauto.h | 4 +-
include/configs/nitrogen6x.h | 4 +-
include/configs/titanium.h | 4 +-
include/configs/vf610twr.h | 7 +-
include/configs/woodburn_common.h | 7 +-
include/i2c.h | 2 +
28 files changed, 1187 insertions(+), 308 deletions(-)
create mode 100644 drivers/i2c/rcar_i2c.c
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2013-10-02 13:04 ` Tom Rini
@ 2013-10-02 13:47 ` Heiko Schocher
0 siblings, 0 replies; 71+ messages in thread
From: Heiko Schocher @ 2013-10-02 13:47 UTC (permalink / raw)
To: u-boot
Hello Tom,
Am 02.10.2013 15:04, schrieb Tom Rini:
> On Tue, Oct 01, 2013 at 08:40:00AM +0200, Heiko Schocher wrote:
>
>> Hello Tom,
>>
>> please pull from u-boot-i2c.git
>>
>> The following changes since commit 6b40852da5c8dd710f9d61204affff3c6a3c9d22:
>>
>> Sound: MAX98095: Support I2S0 channel (2013-09-24 09:10:33 -0400)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-i2c.git master
>>
>> for you to fetch changes up to e436193269620579164d7db4296a3d7a378dbf8d:
>>
>> exynos: i2c: Fix i2c driver to handle NACKs properly (2013-10-01 08:33:16 +0200)
>>
>> ----------------------------------------------------------------
>> Naveen Krishna Ch (1):
>> exynos: i2c: Fix i2c driver to handle NACKs properly
>>
>> drivers/i2c/s3c24x0_i2c.c | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------------------------------------------------------------------------
>> 1 file changed, 89 insertions(+), 124 deletions(-)
>
> NAK:
>
> Testing VCMA9 on -00058-ga882b9e
> Wed Oct 2 09:02:24 EDT 2013
> Configuring for VCMA9 board...
> s3c24x0_i2c.c:234:3: error: 'i' undeclared (first use in this
Ups, Thanks for detecting this ...
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2013-10-01 6:40 Heiko Schocher
@ 2013-10-02 13:04 ` Tom Rini
2013-10-02 13:47 ` Heiko Schocher
0 siblings, 1 reply; 71+ messages in thread
From: Tom Rini @ 2013-10-02 13:04 UTC (permalink / raw)
To: u-boot
On Tue, Oct 01, 2013 at 08:40:00AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git
>
> The following changes since commit 6b40852da5c8dd710f9d61204affff3c6a3c9d22:
>
> Sound: MAX98095: Support I2S0 channel (2013-09-24 09:10:33 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to e436193269620579164d7db4296a3d7a378dbf8d:
>
> exynos: i2c: Fix i2c driver to handle NACKs properly (2013-10-01 08:33:16 +0200)
>
> ----------------------------------------------------------------
> Naveen Krishna Ch (1):
> exynos: i2c: Fix i2c driver to handle NACKs properly
>
> drivers/i2c/s3c24x0_i2c.c | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------------------------------------------------------------------------
> 1 file changed, 89 insertions(+), 124 deletions(-)
NAK:
Testing VCMA9 on -00058-ga882b9e
Wed Oct 2 09:02:24 EDT 2013
Configuring for VCMA9 board...
s3c24x0_i2c.c:234:3: error: 'i' undeclared (first use in this
function)
make[1]: *** [/home/trini/work/u-boot/u-boot/VCMA9/drivers/i2c/s3c24x0_i2c.o] Error 1
make: *** [/home/trini/work/u-boot/u-boot/VCMA9/drivers/i2c/libi2c.o] Error 2
/opt/linaro/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/bin/arm-linux-gnueabihf-size: 'VCMA9/u-boot': No such file
s3c24x0_i2c.c: In function 'i2c_init':
s3c24x0_i2c.c:234:3: error: 'i' undeclared (first use in this function)
s3c24x0_i2c.c:234:3: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [/home/trini/work/u-boot/u-boot/VCMA9/drivers/i2c/s3c24x0_i2c.o] Error 1
make: *** [/home/trini/work/u-boot/u-boot/VCMA9/drivers/i2c/libi2c.o] Error 2
make: *** Waiting for unfinished jobs....
--------------------- SUMMARY ----------------------------
Boards compiled: 1
Boards with errors: 1 ( VCMA9 )
----------------------------------------------------------
Command exited with non-zero status 1
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131002/da5bcdf0/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2013-10-01 6:40 Heiko Schocher
2013-10-02 13:04 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2013-10-01 6:40 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git
The following changes since commit 6b40852da5c8dd710f9d61204affff3c6a3c9d22:
Sound: MAX98095: Support I2S0 channel (2013-09-24 09:10:33 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to e436193269620579164d7db4296a3d7a378dbf8d:
exynos: i2c: Fix i2c driver to handle NACKs properly (2013-10-01 08:33:16 +0200)
----------------------------------------------------------------
Naveen Krishna Ch (1):
exynos: i2c: Fix i2c driver to handle NACKs properly
drivers/i2c/s3c24x0_i2c.c | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------------------------------------------------------------------------------------------
1 file changed, 89 insertions(+), 124 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2013-09-09 5:48 Heiko Schocher
@ 2013-09-09 14:56 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2013-09-09 14:56 UTC (permalink / raw)
To: u-boot
On Mon, Sep 09, 2013 at 07:48:34AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c:
>
> The following changes since commit 1affd4d4a3fe512050e1ad1636d9360c670da531:
>
> cam_enc_4xx: Move CONFIG_SPL_PAD_TO to a config header (2013-09-06 13:09:08 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to f62b123813ea604d16ed6115fe2fa552b23d9102:
>
> powerpc/mpc85xx: Fix the I2C bus speed error on p1022 (2013-09-09 07:44:27 +0200)
>
> ----------------------------------------------------------------
> Tang Yuantian (1):
> powerpc/mpc85xx: Fix the I2C bus speed error on p1022
>
> Ying Zhang (1):
> SPL: P1022DS: switch to new multibus/multiadapter support
>
> arch/powerpc/cpu/mpc85xx/speed.c | 3 ++-
> arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 5 +++++
> board/freescale/p1022ds/spl.c | 6 +++++-
> 3 Dateien ge?ndert, 12 Zeilen hinzugef?gt(+), 2 Zeilen entfernt(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130909/0989cc1f/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2013-09-09 5:48 Heiko Schocher
2013-09-09 14:56 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2013-09-09 5:48 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c:
The following changes since commit 1affd4d4a3fe512050e1ad1636d9360c670da531:
cam_enc_4xx: Move CONFIG_SPL_PAD_TO to a config header (2013-09-06 13:09:08 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to f62b123813ea604d16ed6115fe2fa552b23d9102:
powerpc/mpc85xx: Fix the I2C bus speed error on p1022 (2013-09-09 07:44:27 +0200)
----------------------------------------------------------------
Tang Yuantian (1):
powerpc/mpc85xx: Fix the I2C bus speed error on p1022
Ying Zhang (1):
SPL: P1022DS: switch to new multibus/multiadapter support
arch/powerpc/cpu/mpc85xx/speed.c | 3 ++-
arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 5 +++++
board/freescale/p1022ds/spl.c | 6 +++++-
3 Dateien ge?ndert, 12 Zeilen hinzugef?gt(+), 2 Zeilen entfernt(-)
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2013-08-27 3:52 Heiko Schocher
@ 2013-08-28 12:27 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2013-08-28 12:27 UTC (permalink / raw)
To: u-boot
On Tue, Aug 27, 2013 at 05:52:46AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot.-i2c.git:
>
> The following changes since commit 2b26201a2aef0b310b7c04702b0dba5dea493f77:
>
> env_nand.c: support falling back to redundant env when writing (2013-08-22 17:49:47 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 880a41273265233004516351189aad126f964c86:
>
> i2c: fix i2c dev command for not using new framework (2013-08-27 05:49:52 +0200)
>
> ----------------------------------------------------------------
> Heiko Schocher (1):
> i2c: fix i2c dev command for not using new framework
>
> common/cmd_i2c.c | 2 ++
> 1 Datei ge?ndert, 2 Zeilen hinzugef?gt(+)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130828/1f6c78ab/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2013-08-27 3:52 Heiko Schocher
2013-08-28 12:27 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2013-08-27 3:52 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot.-i2c.git:
The following changes since commit 2b26201a2aef0b310b7c04702b0dba5dea493f77:
env_nand.c: support falling back to redundant env when writing (2013-08-22 17:49:47 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 880a41273265233004516351189aad126f964c86:
i2c: fix i2c dev command for not using new framework (2013-08-27 05:49:52 +0200)
----------------------------------------------------------------
Heiko Schocher (1):
i2c: fix i2c dev command for not using new framework
common/cmd_i2c.c | 2 ++
1 Datei ge?ndert, 2 Zeilen hinzugef?gt(+)
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2013-08-20 10:20 Heiko Schocher
@ 2013-08-20 19:13 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2013-08-20 19:13 UTC (permalink / raw)
To: u-boot
On Tue, Aug 20, 2013 at 12:20:29PM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c.git
>
> The following changes since commit 40a60c6e8bdd00330310eaa351c9391e74d0bc2c:
>
> Prepare v2013.10-rc1 (2013-08-19 17:26:15 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 3fbb517f30fe68e29640bee63ab366569914d898:
>
> pmic:i2c: Replace legacy I2C_SET_BUS macro with i2c_set_bus_num() (2013-08-20 11:15:32 +0200)
>
> ----------------------------------------------------------------
> Chunhe Lan (2):
> fsl_i2c: generate nine pulses on SCL if the I2C bus is hung
> fsl_i2c: add workaround for the erratum I2C A004447
>
> ??ukasz Majewski (3):
> i2c:multibus:fix: Correct I2C_MULTI_BUS value when support for many buses is enabled
> i2c:samsung: Adjust Trats, GONI and Universal_c210 boards to work with new I2C framework
> pmic:i2c: Replace legacy I2C_SET_BUS macro with i2c_set_bus_num()
>
> arch/powerpc/cpu/mpc85xx/cmd_errata.c | 5 +++++
> arch/powerpc/include/asm/config_mpc85xx.h | 16 ++++++++++++++++
> arch/powerpc/include/asm/fsl_i2c.h | 1 +
> arch/powerpc/include/asm/processor.h | 5 +----
> board/samsung/common/multi_i2c.c | 14 ++++++--------
> board/samsung/goni/goni.c | 6 +++++-
> board/samsung/trats/trats.c | 17 ++++++++++++-----
> board/samsung/universal_c210/universal.c | 4 ++++
> drivers/i2c/fsl_i2c.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
> drivers/power/power_i2c.c | 2 +-
> include/configs/trats.h | 3 +++
> include/i2c.h | 2 +-
> 12 Dateien ge??ndert, 120 Zeilen hinzugef??gt(+), 22 Zeilen entfernt(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130820/18233564/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2013-08-20 10:20 Heiko Schocher
2013-08-20 19:13 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2013-08-20 10:20 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c.git
The following changes since commit 40a60c6e8bdd00330310eaa351c9391e74d0bc2c:
Prepare v2013.10-rc1 (2013-08-19 17:26:15 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 3fbb517f30fe68e29640bee63ab366569914d898:
pmic:i2c: Replace legacy I2C_SET_BUS macro with i2c_set_bus_num() (2013-08-20 11:15:32 +0200)
----------------------------------------------------------------
Chunhe Lan (2):
fsl_i2c: generate nine pulses on SCL if the I2C bus is hung
fsl_i2c: add workaround for the erratum I2C A004447
?ukasz Majewski (3):
i2c:multibus:fix: Correct I2C_MULTI_BUS value when support for many buses is enabled
i2c:samsung: Adjust Trats, GONI and Universal_c210 boards to work with new I2C framework
pmic:i2c: Replace legacy I2C_SET_BUS macro with i2c_set_bus_num()
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 5 +++++
arch/powerpc/include/asm/config_mpc85xx.h | 16 ++++++++++++++++
arch/powerpc/include/asm/fsl_i2c.h | 1 +
arch/powerpc/include/asm/processor.h | 5 +----
board/samsung/common/multi_i2c.c | 14 ++++++--------
board/samsung/goni/goni.c | 6 +++++-
board/samsung/trats/trats.c | 17 ++++++++++++-----
board/samsung/universal_c210/universal.c | 4 ++++
drivers/i2c/fsl_i2c.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
drivers/power/power_i2c.c | 2 +-
include/configs/trats.h | 3 +++
include/i2c.h | 2 +-
12 Dateien ge?ndert, 120 Zeilen hinzugef?gt(+), 22 Zeilen entfernt(-)
Thanks!
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2013-08-03 4:07 Heiko Schocher
@ 2013-08-06 15:19 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2013-08-06 15:19 UTC (permalink / raw)
To: u-boot
On Sat, Aug 03, 2013 at 06:07:15AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c
>
> The following changes since commit 245d65b6e503f3a159cffb3392ac3b2c25606d8e:
>
> Merge branch 'master' of git://git.denx.de/u-boot-usb (2013-08-01 09:19:28 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-i2c.git master
>
> for you to fetch changes up to 90f002a90f5ac9087737fbc9e781f3519e011f28:
>
> i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEED (2013-08-03 06:01:18 +0200)
>
> ----------------------------------------------------------------
> Marek Vasut (1):
> i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEED
>
> drivers/i2c/soft_i2c.c | 8 ++++----
> include/configs/blackstamp.h | 4 ++--
> 2 Dateien ge?ndert, 6 Zeilen hinzugef?gt(+), 6 Zeilen entfernt(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130806/eef767e1/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2013-08-03 4:07 Heiko Schocher
2013-08-06 15:19 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2013-08-03 4:07 UTC (permalink / raw)
To: u-boot
Hello Tom,
please pull from u-boot-i2c
The following changes since commit 245d65b6e503f3a159cffb3392ac3b2c25606d8e:
Merge branch 'master' of git://git.denx.de/u-boot-usb (2013-08-01 09:19:28 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 90f002a90f5ac9087737fbc9e781f3519e011f28:
i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEED (2013-08-03 06:01:18 +0200)
----------------------------------------------------------------
Marek Vasut (1):
i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEED
drivers/i2c/soft_i2c.c | 8 ++++----
include/configs/blackstamp.h | 4 ++--
2 Dateien ge?ndert, 6 Zeilen hinzugef?gt(+), 6 Zeilen entfernt(-)
Thanks.
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2012-10-17 3:51 Heiko Schocher
@ 2012-10-17 21:09 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2012-10-17 21:09 UTC (permalink / raw)
To: u-boot
On Wed, Oct 17, 2012 at 05:51:05AM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> The following changes since commit bd23b22badadcdc414a900828253961fc5ec6c39:
>
> Merge branch 'agust at denx.de-next' of git://git.denx.de/u-boot-staging (2012-10-15 13:37:22 -0700)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> Eric Nelson (1):
> i2c_probe: update for use in scripting
>
> Tetsuyuki Kobayashi (9):
> i2c: sh_i2c.c: support iccl and icch extension
> i2c: sh_i2c.c: correct BUSY bit define in ICSR
> i2c: sh_i2c.c: adjust for SH73A0
> i2c: sh_i2c.c: support I2C2, I2C3 and I2C4
> i2c: sh_i2c: enable i2c_probe
> i2c: sh_i2c.c: check error in i2c_read and i2c_write
> arm: rmobile: kzm9g: enable I2C1
> arm: rmobile: kzm9g: enable I2C2
> i2c: sh_i2c: use setbits/clrbits macro
>
> York Sun (1):
> common/i2c: Add i2c write command
>
> board/kmc/kzm9g/kzm9g.c | 7 ++-
> common/cmd_i2c.c | 70 ++++++++++++++++++++++--
> drivers/i2c/sh_i2c.c | 139 +++++++++++++++++++++++++++++++++++------------
> include/configs/kzm9g.h | 8 ++-
> 4 files changed, 181 insertions(+), 43 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20121017/17028834/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2012-10-17 3:51 Heiko Schocher
2012-10-17 21:09 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2012-10-17 3:51 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit bd23b22badadcdc414a900828253961fc5ec6c39:
Merge branch 'agust at denx.de-next' of git://git.denx.de/u-boot-staging (2012-10-15 13:37:22 -0700)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Eric Nelson (1):
i2c_probe: update for use in scripting
Tetsuyuki Kobayashi (9):
i2c: sh_i2c.c: support iccl and icch extension
i2c: sh_i2c.c: correct BUSY bit define in ICSR
i2c: sh_i2c.c: adjust for SH73A0
i2c: sh_i2c.c: support I2C2, I2C3 and I2C4
i2c: sh_i2c: enable i2c_probe
i2c: sh_i2c.c: check error in i2c_read and i2c_write
arm: rmobile: kzm9g: enable I2C1
arm: rmobile: kzm9g: enable I2C2
i2c: sh_i2c: use setbits/clrbits macro
York Sun (1):
common/i2c: Add i2c write command
board/kmc/kzm9g/kzm9g.c | 7 ++-
common/cmd_i2c.c | 70 ++++++++++++++++++++++--
drivers/i2c/sh_i2c.c | 139 +++++++++++++++++++++++++++++++++++------------
include/configs/kzm9g.h | 8 ++-
4 files changed, 181 insertions(+), 43 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2012-09-17 10:03 Heiko Schocher
@ 2012-09-18 14:50 ` Tom Rini
0 siblings, 0 replies; 71+ messages in thread
From: Tom Rini @ 2012-09-18 14:50 UTC (permalink / raw)
To: u-boot
On Mon, Sep 17, 2012 at 12:03:44PM +0200, Heiko Schocher wrote:
> Hello Tom,
>
> The following changes since commit a6f0c4faa4c65a7b7048b12c9d180d7e1aad1721:
>
> Merge branch 'master' of git://git.denx.de/u-boot-avr32 (2012-09-04 09:17:27 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> Koen Kooi (1):
> omap4 i2c: add support for i2c bus 4
>
> ??ukasz Majewski (2):
> i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards
> i2c:soft:multi: Enable soft I2C multibus at Trats development board
>
> arch/arm/include/asm/arch-omap4/cpu.h | 1 +
> arch/arm/include/asm/arch-omap4/i2c.h | 2 +-
> board/samsung/common/Makefile | 43 ++++++++++++++++++++++
> board/samsung/common/multi_i2c.c | 65 +++++++++++++++++++++++++++++++++
> board/samsung/trats/trats.c | 15 ++++++++
> drivers/i2c/omap24xx_i2c.c | 8 ++++
> include/configs/trats.h | 24 +++++++++----
> include/i2c.h | 12 ++++++
> 8 files changed, 162 insertions(+), 8 deletions(-)
> create mode 100644 board/samsung/common/Makefile
> create mode 100644 board/samsung/common/multi_i2c.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120918/c21f63b6/attachment.pgp>
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2012-09-17 10:03 Heiko Schocher
2012-09-18 14:50 ` Tom Rini
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2012-09-17 10:03 UTC (permalink / raw)
To: u-boot
Hello Tom,
The following changes since commit a6f0c4faa4c65a7b7048b12c9d180d7e1aad1721:
Merge branch 'master' of git://git.denx.de/u-boot-avr32 (2012-09-04 09:17:27 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Koen Kooi (1):
omap4 i2c: add support for i2c bus 4
?ukasz Majewski (2):
i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards
i2c:soft:multi: Enable soft I2C multibus at Trats development board
arch/arm/include/asm/arch-omap4/cpu.h | 1 +
arch/arm/include/asm/arch-omap4/i2c.h | 2 +-
board/samsung/common/Makefile | 43 ++++++++++++++++++++++
board/samsung/common/multi_i2c.c | 65 +++++++++++++++++++++++++++++++++
board/samsung/trats/trats.c | 15 ++++++++
drivers/i2c/omap24xx_i2c.c | 8 ++++
include/configs/trats.h | 24 +++++++++----
include/i2c.h | 12 ++++++
8 files changed, 162 insertions(+), 8 deletions(-)
create mode 100644 board/samsung/common/Makefile
create mode 100644 board/samsung/common/multi_i2c.c
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2012-07-31 7:58 Heiko Schocher
@ 2012-07-31 20:14 ` Wolfgang Denk
0 siblings, 0 replies; 71+ messages in thread
From: Wolfgang Denk @ 2012-07-31 20:14 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <5017901A.2060005@denx.de> you wrote:
> Hello Wolfgang,
>
> The following changes since commit b98b611502f5e0a85a1f8e15cf46c470cb105614:
>
> Merge branch 'next' of git://git.denx.de/u-boot (2012-07-30 20:39:52 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> Holger Brunck (2):
> i2c: deblock i2c bus also if accessed before realocation
> km/common: remove printfs for i2c deblocking code
>
> Rajeshwari Shinde (8):
> EXYNOS: CLK: Add i2c clock
> EXYNOS: Add I2C base address.
> EXYNOS5: define EXYNOS5_I2C_SPACING
> EXYNOS: PINMUX: Add pinmux support for I2C
> I2C: Move struct s3c24x0_i2c to a common place.
> I2C: Modify the I2C driver for EXYNOS5
> I2C: Add support for Multi channel
> CONFIG: SMDK5250: I2C: Enable I2C
>
> Troy Kisky (25):
> mxc_i2c: fix i2c_imx_stop
> mxc_i2c: remove ifdef of CONFIG_HARD_I2C
> mxc_i2c: create tx_byte function
> mxc_i2c: clear i2sr before waiting for bit
> mxc_i2c: create i2c_init_transfer
> mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write
> mxc_i2c.c: code i2c_probe as a 0 length i2c_write
> mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state
> mxc_i2c: remove redundant read
> mxc_i2c: place imx_start code inline
> mxc_i2c: place i2c_reset code inline
> mxc_i2c: don't disable controller after every transaction
> mxc_i2c: change slave addr if conflicts with destination.
> mxc_i2c: check for arbitration lost
> mxc_i2c: add retries
> mxc_i2c: add i2c_regs argument to i2c_imx_stop
> mxc_i2c: prep work for multiple busses support
> mxc_i2c: add bus recovery support
> mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support
> iomux-v3: remove include of mx6x_pins.h
> i.mx: iomux-v3.h: move to imx-common include directory
> i.mx: iomux-v3.c: move to imx-common directory
> i.mx53: add definition for I2C3_BASE_ADDR
> imx-common: add i2c.c for bus recovery support
> mx6qsabrelite: add i2c multi-bus support
>
> arch/arm/cpu/armv7/exynos/clock.c | 33 ++
> arch/arm/cpu/armv7/exynos/pinmux.c | 52 +++
> arch/arm/cpu/armv7/imx-common/Makefile | 4 +-
> arch/arm/cpu/armv7/imx-common/i2c.c | 99 ++++
> arch/arm/cpu/armv7/{mx6 => imx-common}/iomux-v3.c | 3 +-
> arch/arm/cpu/armv7/mx5/clock.c | 20 +
> arch/arm/cpu/armv7/mx6/Makefile | 2 +-
> arch/arm/cpu/armv7/mx6/clock.c | 20 +
> arch/arm/include/asm/arch-exynos/clk.h | 1 +
> arch/arm/include/asm/arch-exynos/cpu.h | 5 +
> arch/arm/include/asm/arch-exynos/periph.h | 8 +
> arch/arm/include/asm/arch-mx5/clock.h | 1 +
> arch/arm/include/asm/arch-mx5/imx-regs.h | 1 +
> arch/arm/include/asm/arch-mx6/clock.h | 1 +
> arch/arm/include/asm/arch-mx6/mx6x_pins.h | 2 +-
> arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 10 -
> .../asm/{arch-mx6 => imx-common}/iomux-v3.h | 0
> arch/arm/include/asm/imx-common/mxc_i2c.h | 42 ++
> board/freescale/mx6qarm2/mx6qarm2.c | 2 +-
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 54 ++-
> board/keymile/common/common.c | 3 -
> board/samsung/smdk5250/smdk5250.c | 30 ++-
> common/cmd_i2c.c | 1 +
> drivers/i2c/mxc_i2c.c | 477 +++++++++++---------
> drivers/i2c/s3c24x0_i2c.c | 221 ++++++----
> drivers/i2c/s3c24x0_i2c.h | 33 ++
> drivers/usb/host/ehci-mx6.c | 2 +-
> include/configs/mx6qsabrelite.h | 6 +-
> include/configs/smdk5250.h | 10 +
> 29 files changed, 822 insertions(+), 321 deletions(-)
> create mode 100644 arch/arm/cpu/armv7/imx-common/i2c.c
> rename arch/arm/cpu/armv7/{mx6 => imx-common}/iomux-v3.c (97%)
> rename arch/arm/include/asm/{arch-mx6 => imx-common}/iomux-v3.h (100%)
> create mode 100644 arch/arm/include/asm/imx-common/mxc_i2c.h
> create mode 100644 drivers/i2c/s3c24x0_i2c.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The one charm of marriage is that it makes a life of deception a
neccessity." - Oscar Wilde
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2012-07-31 7:58 Heiko Schocher
2012-07-31 20:14 ` Wolfgang Denk
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2012-07-31 7:58 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit b98b611502f5e0a85a1f8e15cf46c470cb105614:
Merge branch 'next' of git://git.denx.de/u-boot (2012-07-30 20:39:52 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Holger Brunck (2):
i2c: deblock i2c bus also if accessed before realocation
km/common: remove printfs for i2c deblocking code
Rajeshwari Shinde (8):
EXYNOS: CLK: Add i2c clock
EXYNOS: Add I2C base address.
EXYNOS5: define EXYNOS5_I2C_SPACING
EXYNOS: PINMUX: Add pinmux support for I2C
I2C: Move struct s3c24x0_i2c to a common place.
I2C: Modify the I2C driver for EXYNOS5
I2C: Add support for Multi channel
CONFIG: SMDK5250: I2C: Enable I2C
Troy Kisky (25):
mxc_i2c: fix i2c_imx_stop
mxc_i2c: remove ifdef of CONFIG_HARD_I2C
mxc_i2c: create tx_byte function
mxc_i2c: clear i2sr before waiting for bit
mxc_i2c: create i2c_init_transfer
mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write
mxc_i2c.c: code i2c_probe as a 0 length i2c_write
mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state
mxc_i2c: remove redundant read
mxc_i2c: place imx_start code inline
mxc_i2c: place i2c_reset code inline
mxc_i2c: don't disable controller after every transaction
mxc_i2c: change slave addr if conflicts with destination.
mxc_i2c: check for arbitration lost
mxc_i2c: add retries
mxc_i2c: add i2c_regs argument to i2c_imx_stop
mxc_i2c: prep work for multiple busses support
mxc_i2c: add bus recovery support
mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support
iomux-v3: remove include of mx6x_pins.h
i.mx: iomux-v3.h: move to imx-common include directory
i.mx: iomux-v3.c: move to imx-common directory
i.mx53: add definition for I2C3_BASE_ADDR
imx-common: add i2c.c for bus recovery support
mx6qsabrelite: add i2c multi-bus support
arch/arm/cpu/armv7/exynos/clock.c | 33 ++
arch/arm/cpu/armv7/exynos/pinmux.c | 52 +++
arch/arm/cpu/armv7/imx-common/Makefile | 4 +-
arch/arm/cpu/armv7/imx-common/i2c.c | 99 ++++
arch/arm/cpu/armv7/{mx6 => imx-common}/iomux-v3.c | 3 +-
arch/arm/cpu/armv7/mx5/clock.c | 20 +
arch/arm/cpu/armv7/mx6/Makefile | 2 +-
arch/arm/cpu/armv7/mx6/clock.c | 20 +
arch/arm/include/asm/arch-exynos/clk.h | 1 +
arch/arm/include/asm/arch-exynos/cpu.h | 5 +
arch/arm/include/asm/arch-exynos/periph.h | 8 +
arch/arm/include/asm/arch-mx5/clock.h | 1 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 1 +
arch/arm/include/asm/arch-mx6/clock.h | 1 +
arch/arm/include/asm/arch-mx6/mx6x_pins.h | 2 +-
arch/arm/include/asm/arch-s3c24x0/s3c24x0.h | 10 -
.../asm/{arch-mx6 => imx-common}/iomux-v3.h | 0
arch/arm/include/asm/imx-common/mxc_i2c.h | 42 ++
board/freescale/mx6qarm2/mx6qarm2.c | 2 +-
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 54 ++-
board/keymile/common/common.c | 3 -
board/samsung/smdk5250/smdk5250.c | 30 ++-
common/cmd_i2c.c | 1 +
drivers/i2c/mxc_i2c.c | 477 +++++++++++---------
drivers/i2c/s3c24x0_i2c.c | 221 ++++++----
drivers/i2c/s3c24x0_i2c.h | 33 ++
drivers/usb/host/ehci-mx6.c | 2 +-
include/configs/mx6qsabrelite.h | 6 +-
include/configs/smdk5250.h | 10 +
29 files changed, 822 insertions(+), 321 deletions(-)
create mode 100644 arch/arm/cpu/armv7/imx-common/i2c.c
rename arch/arm/cpu/armv7/{mx6 => imx-common}/iomux-v3.c (97%)
rename arch/arm/include/asm/{arch-mx6 => imx-common}/iomux-v3.h (100%)
create mode 100644 arch/arm/include/asm/imx-common/mxc_i2c.h
create mode 100644 drivers/i2c/s3c24x0_i2c.h
A "MAKEALL arm" with ELDK-5.2 compiled fine:
[hs at pollux u-boot-i2c]$ eldk-switch -r 5.2 armv5te
Setup for armv5te (using ELDK 5.2)
[hs at pollux u-boot-i2c]$ ./MAKEALL arm
[...]
--------------------- SUMMARY ----------------------------
Boards compiled: 303
----------------------------------------------------------
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2012-07-11 9:55 Heiko Schocher
@ 2012-07-12 6:18 ` Wolfgang Denk
0 siblings, 0 replies; 71+ messages in thread
From: Wolfgang Denk @ 2012-07-12 6:18 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <4FFD4D8F.7050907@denx.de> you wrote:
> Hello Wolfgang,
>
> Sorry for the late pull request, but it seems my Pull request Email
> got lost ... Sorry. A "MAKEALL arm" with ELDK-5.2 compiled fine.
>
> The following changes since commit 211e47549b668c7cdd8658c0413a272f0d0495d4:
>
> Prepare v2012.07-rc1 (2012-07-10 09:21:12 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-i2c.git master
>
> Fabio Estevam (1):
> mx28evk: Add I2C support
>
> Torsten Fleischer (1):
> mxs-i2c: Fix internal address byte order
>
> Troy Kisky (3):
> mxc_i2c: specify i2c base address in config file
> mx6qsabrelite: add i2c support
> mxc_i2c: remove setting speed at each start
>
> arch/arm/include/asm/arch-mx31/imx-regs.h | 7 +++++
> arch/arm/include/asm/arch-mx35/imx-regs.h | 2 +-
> board/freescale/mx28evk/iomux.c | 3 ++
> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 11 +++++++++
> drivers/i2c/mxc_i2c.c | 31 +++---------------------
> drivers/i2c/mxs_i2c.c | 2 +-
> include/configs/flea3.h | 2 +-
> include/configs/imx31_phycore.h | 3 +-
> include/configs/mx28evk.h | 8 ++++++
> include/configs/mx35pdk.h | 2 +-
> include/configs/mx53ard.h | 2 +-
> include/configs/mx53evk.h | 2 +-
> include/configs/mx53loco.h | 2 +-
> include/configs/mx53smd.h | 2 +-
> include/configs/mx6qsabrelite.h | 8 ++++++
> 15 files changed, 51 insertions(+), 36 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"...and the fully armed nuclear warheads, are, of course, merely a
courtesy detail."
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2012-07-11 9:55 Heiko Schocher
2012-07-12 6:18 ` Wolfgang Denk
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2012-07-11 9:55 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
Sorry for the late pull request, but it seems my Pull request Email
got lost ... Sorry. A "MAKEALL arm" with ELDK-5.2 compiled fine.
The following changes since commit 211e47549b668c7cdd8658c0413a272f0d0495d4:
Prepare v2012.07-rc1 (2012-07-10 09:21:12 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Fabio Estevam (1):
mx28evk: Add I2C support
Torsten Fleischer (1):
mxs-i2c: Fix internal address byte order
Troy Kisky (3):
mxc_i2c: specify i2c base address in config file
mx6qsabrelite: add i2c support
mxc_i2c: remove setting speed at each start
arch/arm/include/asm/arch-mx31/imx-regs.h | 7 +++++
arch/arm/include/asm/arch-mx35/imx-regs.h | 2 +-
board/freescale/mx28evk/iomux.c | 3 ++
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 11 +++++++++
drivers/i2c/mxc_i2c.c | 31 +++---------------------
drivers/i2c/mxs_i2c.c | 2 +-
include/configs/flea3.h | 2 +-
include/configs/imx31_phycore.h | 3 +-
include/configs/mx28evk.h | 8 ++++++
include/configs/mx35pdk.h | 2 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/mx6qsabrelite.h | 8 ++++++
15 files changed, 51 insertions(+), 36 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2012-04-24 9:11 Heiko Schocher
@ 2012-04-30 14:45 ` Wolfgang Denk
0 siblings, 0 replies; 71+ messages in thread
From: Wolfgang Denk @ 2012-04-30 14:45 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <4F966E48.3030604@denx.de> you wrote:
> Hello Wolfgang,
>
> The following changes since commit 61ddce07f8b96c5df7d00466b4da9edaecb0eff1:
>
> sandbox: Use the new run_command() (2012-04-23 22:53:54 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-i2c.git master
>
> Armando Visconti (1):
> i2c:designware Turn off the ctrl when setting the speed
>
> Nobuhiro Iwamatsu (1):
> sh: i2c: Add support I2C controller of SH7734
>
> Vipin KUMAR (1):
> i2c: Add support for designware i2c controller
>
> drivers/i2c/Makefile | 3 +-
> drivers/i2c/{spr_i2c.c => designware_i2c.c} | 15 +-
> .../spr_i2c.h => drivers/i2c/designware_i2c.h | 6 +-
> drivers/i2c/sh_sh7734_i2c.c | 387 ++++++++++++++++++++
> include/configs/spear-common.h | 2 +-
> 5 files changed, 406 insertions(+), 7 deletions(-)
> rename drivers/i2c/{spr_i2c.c => designware_i2c.c} (95%)
> rename arch/arm/include/asm/arch-spear/spr_i2c.h => drivers/i2c/designware_i2c.h (98%)
> create mode 100644 drivers/i2c/sh_sh7734_i2c.c
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You can do this in a number of ways. IBM chose to do all of them.
Why do you find that funny? -- D. Taylor, Computer Science 350
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2012-04-24 9:11 Heiko Schocher
2012-04-30 14:45 ` Wolfgang Denk
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2012-04-24 9:11 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit 61ddce07f8b96c5df7d00466b4da9edaecb0eff1:
sandbox: Use the new run_command() (2012-04-23 22:53:54 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Armando Visconti (1):
i2c:designware Turn off the ctrl when setting the speed
Nobuhiro Iwamatsu (1):
sh: i2c: Add support I2C controller of SH7734
Vipin KUMAR (1):
i2c: Add support for designware i2c controller
drivers/i2c/Makefile | 3 +-
drivers/i2c/{spr_i2c.c => designware_i2c.c} | 15 +-
.../spr_i2c.h => drivers/i2c/designware_i2c.h | 6 +-
drivers/i2c/sh_sh7734_i2c.c | 387 ++++++++++++++++++++
include/configs/spear-common.h | 2 +-
5 files changed, 406 insertions(+), 7 deletions(-)
rename drivers/i2c/{spr_i2c.c => designware_i2c.c} (95%)
rename arch/arm/include/asm/arch-spear/spr_i2c.h => drivers/i2c/designware_i2c.h (98%)
create mode 100644 drivers/i2c/sh_sh7734_i2c.c
"MAKEALL arm" shows:
[hs at pollux u-boot-i2c]$ eldk-switch -r 5.1 armv5te
Setup for armv5te (using ELDK 5.1)
[hs at pollux u-boot-i2c]$ ./MAKEALL arm
[...]
--------------------- SUMMARY ----------------------------
Boards compiled: 277
----------------------------------------------------------
[hs at pollux u-boot-i2c]$
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2012-02-21 6:46 Heiko Schocher
@ 2012-02-26 21:17 ` Wolfgang Denk
0 siblings, 0 replies; 71+ messages in thread
From: Wolfgang Denk @ 2012-02-26 21:17 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <4F433DAD.6050303@denx.de> you wrote:
> Hello Wolfgang,
>
> The following changes since commit 2acca35ce4604dcef933f07d90aa9c9c930e1049:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mmc (2012-02-17 23:54:46 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> Tom Rini (2):
> Revert "ARM: AM33XX: Add AM33XX I2C driver support"
> Revert "ARM: I2C: I2C Multi byte address support"
>
> drivers/i2c/omap24xx_i2c.c | 475 ++++++++++++++++----------------------------
> drivers/i2c/omap24xx_i2c.h | 2 -
> 2 files changed, 174 insertions(+), 303 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You can fool some of the people all of the time, and You can fool all
of the people some of the time, but You can't fool mom.
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2012-02-21 6:46 Heiko Schocher
2012-02-26 21:17 ` Wolfgang Denk
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2012-02-21 6:46 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit 2acca35ce4604dcef933f07d90aa9c9c930e1049:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2012-02-17 23:54:46 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Tom Rini (2):
Revert "ARM: AM33XX: Add AM33XX I2C driver support"
Revert "ARM: I2C: I2C Multi byte address support"
drivers/i2c/omap24xx_i2c.c | 475 ++++++++++++++++----------------------------
drivers/i2c/omap24xx_i2c.h | 2 -
2 files changed, 174 insertions(+), 303 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2012-01-25 6:26 Heiko Schocher
@ 2012-02-11 21:07 ` Wolfgang Denk
0 siblings, 0 replies; 71+ messages in thread
From: Wolfgang Denk @ 2012-02-11 21:07 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <4F1FA08A.7040501@denx.de> you wrote:
> Hello Wolfgang,
>
> The following changes since commit 137703b811502dfea364650fb3e17f20b4c21333:
>
> overo: add SPL support (2012-01-16 08:40:13 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-i2c.git master
>
> Patil, Rachna (3):
> ARM: I2C: I2C Multi byte address support
> ARM: AM33XX: Add AM33XX I2C driver support
> ARM: AM33XX: Add i2c support
>
> arch/arm/cpu/armv7/am33xx/clock.c | 5 +
> arch/arm/include/asm/arch-am33xx/common_def.h | 1 +
> arch/arm/include/asm/arch-am33xx/cpu.h | 3 +-
> arch/arm/include/asm/arch-am33xx/i2c.h | 81 +++++
> board/ti/am335x/evm.c | 7 +
> board/ti/am335x/mux.c | 13 +
> drivers/i2c/omap24xx_i2c.c | 475 ++++++++++++++++---------
> drivers/i2c/omap24xx_i2c.h | 2 +
> include/configs/am335x_evm.h | 9 +
> 9 files changed, 421 insertions(+), 175 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-am33xx/i2c.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There's no sense in being precise when you don't even know what
you're talking about. -- John von Neumann
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2012-01-25 6:26 Heiko Schocher
2012-02-11 21:07 ` Wolfgang Denk
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2012-01-25 6:26 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit 137703b811502dfea364650fb3e17f20b4c21333:
overo: add SPL support (2012-01-16 08:40:13 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Patil, Rachna (3):
ARM: I2C: I2C Multi byte address support
ARM: AM33XX: Add AM33XX I2C driver support
ARM: AM33XX: Add i2c support
arch/arm/cpu/armv7/am33xx/clock.c | 5 +
arch/arm/include/asm/arch-am33xx/common_def.h | 1 +
arch/arm/include/asm/arch-am33xx/cpu.h | 3 +-
arch/arm/include/asm/arch-am33xx/i2c.h | 81 +++++
board/ti/am335x/evm.c | 7 +
board/ti/am335x/mux.c | 13 +
drivers/i2c/omap24xx_i2c.c | 475 ++++++++++++++++---------
drivers/i2c/omap24xx_i2c.h | 2 +
include/configs/am335x_evm.h | 9 +
9 files changed, 421 insertions(+), 175 deletions(-)
create mode 100644 arch/arm/include/asm/arch-am33xx/i2c.h
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2011-11-09 5:31 Heiko Schocher
@ 2011-11-16 18:59 ` Wolfgang Denk
0 siblings, 0 replies; 71+ messages in thread
From: Wolfgang Denk @ 2011-11-16 18:59 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <4EBA1018.9030506@denx.de> you wrote:
> Hello Wolfgang,
>
> The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08 07:44:52 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> Kumar Gala (1):
> fsl_i2c: Fix compile warning
>
> drivers/i2c/fsl_i2c.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A man either lives life as it happens to him, meets it head-on and
licks it, or he turns his back on it and starts to wither away.
-- Dr. Boyce, "The Menagerie" ("The Cage"), stardate unknown
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2011-11-09 5:31 Heiko Schocher
2011-11-16 18:59 ` Wolfgang Denk
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2011-11-09 5:31 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit 5721385b187b3154c7768e6c182501022f4e2e45:
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx (2011-11-08 07:44:52 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Kumar Gala (1):
fsl_i2c: Fix compile warning
drivers/i2c/fsl_i2c.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2011-11-04 5:27 Heiko Schocher
@ 2011-11-07 23:36 ` Wolfgang Denk
0 siblings, 0 replies; 71+ messages in thread
From: Wolfgang Denk @ 2011-11-07 23:36 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <4EB377A8.9090406@denx.de> you wrote:
> Hello Wolfgang,
>
> The following changes since commit fec79acc864bed049b6beae719ccbf2bbec5403a:
>
> sandbox: drop unused return (2011-11-03 22:35:25 +0100)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-i2c.git master
>
> Jerry Huang (1):
> Powerpc/i2c: Use the same initialize codes
>
> drivers/i2c/fsl_i2c.c | 47 +++++++++++++++++++++++++----------------------
> 1 files changed, 25 insertions(+), 22 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Anyone who knows history, particularly the history of Europe, will, I
think, recognize that the domination of education or of government by
any one particular religious faith is never a happy arrangement for
the people. - Eleanor Roosevelt
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2011-11-04 5:27 Heiko Schocher
2011-11-07 23:36 ` Wolfgang Denk
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2011-11-04 5:27 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit fec79acc864bed049b6beae719ccbf2bbec5403a:
sandbox: drop unused return (2011-11-03 22:35:25 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Jerry Huang (1):
Powerpc/i2c: Use the same initialize codes
drivers/i2c/fsl_i2c.c | 47 +++++++++++++++++++++++++----------------------
1 files changed, 25 insertions(+), 22 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2011-10-03 9:57 Heiko Schocher
@ 2011-10-04 20:07 ` Wolfgang Denk
0 siblings, 0 replies; 71+ messages in thread
From: Wolfgang Denk @ 2011-10-04 20:07 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <4E898719.6010702@denx.de> you wrote:
> Hello Wolfgang,
>
> The following changes since commit 7b8ffea2ac44097ed1c99ba70b8c6a4cf12ba0b4:
>
> GCC4.6: Squash warning in lzo1x_decompress.c (2011-10-01 23:34:38 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-i2c.git master
>
> Lei Wen (2):
> I2C: mv_i2c: fix build issue when enable debug option
> I2C: mv_i2c: fix multi-bus init issue
>
> drivers/i2c/mv_i2c.c | 44 +++++++++++++++++++++++++-------------------
> 1 files changed, 25 insertions(+), 19 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
People seldom know what they want until you give them what they ask
for.
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2011-10-03 9:57 Heiko Schocher
2011-10-04 20:07 ` Wolfgang Denk
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2011-10-03 9:57 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit 7b8ffea2ac44097ed1c99ba70b8c6a4cf12ba0b4:
GCC4.6: Squash warning in lzo1x_decompress.c (2011-10-01 23:34:38 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Lei Wen (2):
I2C: mv_i2c: fix build issue when enable debug option
I2C: mv_i2c: fix multi-bus init issue
drivers/i2c/mv_i2c.c | 44 +++++++++++++++++++++++++-------------------
1 files changed, 25 insertions(+), 19 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
2011-04-14 6:40 Heiko Schocher
@ 2011-04-20 20:50 ` Wolfgang Denk
0 siblings, 0 replies; 71+ messages in thread
From: Wolfgang Denk @ 2011-04-20 20:50 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <4DA696E7.5090100@denx.de> you wrote:
> Hello Wolfgang,
>
> please pull from:
>
> The following changes since commit 73e5476e1edf1b860dbd9b5fc21ef32ac1b551ba:
>
> MAINTAINERS: fix email address case (2011-04-13 22:40:51 +0200)
>
> are available in the git repository at:
> git://git.denx.de/u-boot-i2c.git master
>
> Nick Thompson (1):
> I2C: OMAP: detect more devices when probing an i2c bus
>
> drivers/i2c/omap24xx_i2c.c | 42 +++++++++++-------------------------------
> 1 files changed, 11 insertions(+), 31 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Why should we subsidize intellectual curiosity?" - Ronald Reagan
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull request
@ 2011-04-14 6:40 Heiko Schocher
2011-04-20 20:50 ` Wolfgang Denk
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2011-04-14 6:40 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
please pull from:
The following changes since commit 73e5476e1edf1b860dbd9b5fc21ef32ac1b551ba:
MAINTAINERS: fix email address case (2011-04-13 22:40:51 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Nick Thompson (1):
I2C: OMAP: detect more devices when probing an i2c bus
drivers/i2c/omap24xx_i2c.c | 42 +++++++++++-------------------------------
1 files changed, 11 insertions(+), 31 deletions(-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull Request
2010-04-06 7:14 [U-Boot] [i2c] Pull Request Heiko Schocher
@ 2010-04-07 22:15 ` Wolfgang Denk
0 siblings, 0 replies; 71+ messages in thread
From: Wolfgang Denk @ 2010-04-07 22:15 UTC (permalink / raw)
To: u-boot
Dear Heiko Schocher,
In message <4BBADF65.1020207@denx.de> you wrote:
> Hello Wolfgang,
>
> The following changes since commit ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af:
> Wolfgang Denk (1):
> Merge branch 'next'
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-i2c.git master
>
> Stefan Roese (1):
> i2c: Move PPC4xx I2C driver into drivers/i2c directory
>
> cpu/ppc4xx/Makefile | 1 -
> drivers/i2c/Makefile | 1 +
> cpu/ppc4xx/i2c.c => drivers/i2c/ppc4xx_i2c.c | 0
> include/configs/ASH405.h | 1 +
> include/configs/CANBT.h | 1 +
> include/configs/CMS700.h | 1 +
> include/configs/CPCI2DP.h | 1 +
> include/configs/CPCI405.h | 1 +
> include/configs/CPCI4052.h | 1 +
> include/configs/CPCI405AB.h | 1 +
> include/configs/CPCI405DT.h | 1 +
> include/configs/CPCIISER4.h | 1 +
> include/configs/CRAYL1.h | 1 +
> include/configs/DP405.h | 1 +
> include/configs/DU405.h | 1 +
> include/configs/DU440.h | 1 +
> include/configs/ERIC.h | 1 +
> include/configs/G2000.h | 1 +
> include/configs/HH405.h | 1 +
> include/configs/HUB405.h | 1 +
> include/configs/JSE.h | 1 +
> include/configs/KAREF.h | 1 +
> include/configs/METROBOX.h | 1 +
> include/configs/MIP405.h | 1 +
> include/configs/OCRTC.h | 1 +
> include/configs/ORSG.h | 1 +
> include/configs/PCI405.h | 1 +
> include/configs/PIP405.h | 1 +
> include/configs/PLU405.h | 1 +
> include/configs/PMC405.h | 1 +
> include/configs/PMC405DE.h | 1 +
> include/configs/PMC440.h | 1 +
> include/configs/PPChameleonEVB.h | 1 +
> include/configs/VOH405.h | 1 +
> include/configs/VOM405.h | 1 +
> include/configs/W7OLMC.h | 1 +
> include/configs/W7OLMG.h | 1 +
> include/configs/WUH405.h | 1 +
> include/configs/XPEDITE1000.h | 1 +
> include/configs/alpr.h | 1 +
> include/configs/amcc-common.h | 1 +
> include/configs/csb272.h | 1 +
> include/configs/csb472.h | 1 +
> include/configs/korat.h | 1 +
> include/configs/lwmon5.h | 1 +
> include/configs/netstal-common.h | 1 +
> include/configs/p3p440.h | 1 +
> include/configs/pcs440ep.h | 1 +
> include/configs/quad100hd.h | 1 +
> include/configs/sbc405.h | 1 +
> include/configs/sc3.h | 1 +
> include/configs/zeus.h | 1 +
> 52 files changed, 50 insertions(+), 1 deletions(-)
> rename cpu/ppc4xx/i2c.c => drivers/i2c/ppc4xx_i2c.c (100%)
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Syntactic sugar causes cancer of the semicolon.
- Epigrams in Programming, ACM SIGPLAN Sept. 1982
^ permalink raw reply [flat|nested] 71+ messages in thread
* [U-Boot] [i2c] Pull Request
@ 2010-04-06 7:14 Heiko Schocher
2010-04-07 22:15 ` Wolfgang Denk
0 siblings, 1 reply; 71+ messages in thread
From: Heiko Schocher @ 2010-04-06 7:14 UTC (permalink / raw)
To: u-boot
Hello Wolfgang,
The following changes since commit ffa37fc98d71ef930bccd4e9eed37f6ce6b4d6af:
Wolfgang Denk (1):
Merge branch 'next'
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
Stefan Roese (1):
i2c: Move PPC4xx I2C driver into drivers/i2c directory
cpu/ppc4xx/Makefile | 1 -
drivers/i2c/Makefile | 1 +
cpu/ppc4xx/i2c.c => drivers/i2c/ppc4xx_i2c.c | 0
include/configs/ASH405.h | 1 +
include/configs/CANBT.h | 1 +
include/configs/CMS700.h | 1 +
include/configs/CPCI2DP.h | 1 +
include/configs/CPCI405.h | 1 +
include/configs/CPCI4052.h | 1 +
include/configs/CPCI405AB.h | 1 +
include/configs/CPCI405DT.h | 1 +
include/configs/CPCIISER4.h | 1 +
include/configs/CRAYL1.h | 1 +
include/configs/DP405.h | 1 +
include/configs/DU405.h | 1 +
include/configs/DU440.h | 1 +
include/configs/ERIC.h | 1 +
include/configs/G2000.h | 1 +
include/configs/HH405.h | 1 +
include/configs/HUB405.h | 1 +
include/configs/JSE.h | 1 +
include/configs/KAREF.h | 1 +
include/configs/METROBOX.h | 1 +
include/configs/MIP405.h | 1 +
include/configs/OCRTC.h | 1 +
include/configs/ORSG.h | 1 +
include/configs/PCI405.h | 1 +
include/configs/PIP405.h | 1 +
include/configs/PLU405.h | 1 +
include/configs/PMC405.h | 1 +
include/configs/PMC405DE.h | 1 +
include/configs/PMC440.h | 1 +
include/configs/PPChameleonEVB.h | 1 +
include/configs/VOH405.h | 1 +
include/configs/VOM405.h | 1 +
include/configs/W7OLMC.h | 1 +
include/configs/W7OLMG.h | 1 +
include/configs/WUH405.h | 1 +
include/configs/XPEDITE1000.h | 1 +
include/configs/alpr.h | 1 +
include/configs/amcc-common.h | 1 +
include/configs/csb272.h | 1 +
include/configs/csb472.h | 1 +
include/configs/korat.h | 1 +
include/configs/lwmon5.h | 1 +
include/configs/netstal-common.h | 1 +
include/configs/p3p440.h | 1 +
include/configs/pcs440ep.h | 1 +
include/configs/quad100hd.h | 1 +
include/configs/sbc405.h | 1 +
include/configs/sc3.h | 1 +
include/configs/zeus.h | 1 +
52 files changed, 50 insertions(+), 1 deletions(-)
rename cpu/ppc4xx/i2c.c => drivers/i2c/ppc4xx_i2c.c (100%)
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
^ permalink raw reply [flat|nested] 71+ messages in thread
end of thread, other threads:[~2015-03-18 8:18 UTC | newest]
Thread overview: 71+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-05-08 5:05 [U-Boot] [i2c] Pull request Heiko Schocher
2014-05-09 15:04 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2015-03-18 8:18 Heiko Schocher
2014-12-08 6:29 Heiko Schocher
2014-12-08 21:41 ` Tom Rini
[not found] <546C3DA0.7070300@denx.de>
2014-11-20 14:16 ` Tom Rini
2014-11-10 7:41 Heiko Schocher
2014-11-10 21:29 ` Tom Rini
2014-10-29 9:43 Heiko Schocher
2014-10-29 15:22 ` Tom Rini
2014-07-16 5:16 Heiko Schocher
2014-07-16 6:47 ` Ian Campbell
2014-07-16 8:04 ` Heiko Schocher
2014-07-16 8:06 ` Ian Campbell
2014-07-21 20:44 ` Tom Rini
[not found] <53BA9EB6.1020007@denx.de>
2014-07-07 21:00 ` Tom Rini
2014-06-12 9:44 Heiko Schocher
2014-06-12 14:22 ` Tom Rini
2014-05-14 11:46 Heiko Schocher
2014-05-14 14:20 ` Tom Rini
2014-04-29 6:49 Heiko Schocher
2014-04-29 16:45 ` Tom Rini
2014-03-31 5:35 Heiko Schocher
2014-03-31 12:32 ` Tom Rini
[not found] <52E9F338.70900@denx.de>
2014-02-20 13:05 ` Heiko Schocher
2014-02-20 17:17 ` Tom Rini
2014-01-18 7:28 Heiko Schocher
2014-01-20 9:24 ` Michal Simek
2014-01-20 9:34 ` Alexey Brodkin
2014-01-20 9:41 ` Michal Simek
2013-12-09 7:00 Heiko Schocher
2013-12-11 16:44 ` Tom Rini
2013-11-13 6:41 Heiko Schocher
2013-11-17 19:16 ` Tom Rini
2013-10-17 6:48 Heiko Schocher
2013-10-24 1:21 ` Tom Rini
2013-10-01 6:40 Heiko Schocher
2013-10-02 13:04 ` Tom Rini
2013-10-02 13:47 ` Heiko Schocher
2013-09-09 5:48 Heiko Schocher
2013-09-09 14:56 ` Tom Rini
2013-08-27 3:52 Heiko Schocher
2013-08-28 12:27 ` Tom Rini
2013-08-20 10:20 Heiko Schocher
2013-08-20 19:13 ` Tom Rini
2013-08-03 4:07 Heiko Schocher
2013-08-06 15:19 ` Tom Rini
2012-10-17 3:51 Heiko Schocher
2012-10-17 21:09 ` Tom Rini
2012-09-17 10:03 Heiko Schocher
2012-09-18 14:50 ` Tom Rini
2012-07-31 7:58 Heiko Schocher
2012-07-31 20:14 ` Wolfgang Denk
2012-07-11 9:55 Heiko Schocher
2012-07-12 6:18 ` Wolfgang Denk
2012-04-24 9:11 Heiko Schocher
2012-04-30 14:45 ` Wolfgang Denk
2012-02-21 6:46 Heiko Schocher
2012-02-26 21:17 ` Wolfgang Denk
2012-01-25 6:26 Heiko Schocher
2012-02-11 21:07 ` Wolfgang Denk
2011-11-09 5:31 Heiko Schocher
2011-11-16 18:59 ` Wolfgang Denk
2011-11-04 5:27 Heiko Schocher
2011-11-07 23:36 ` Wolfgang Denk
2011-10-03 9:57 Heiko Schocher
2011-10-04 20:07 ` Wolfgang Denk
2011-04-14 6:40 Heiko Schocher
2011-04-20 20:50 ` Wolfgang Denk
2010-04-06 7:14 [U-Boot] [i2c] Pull Request Heiko Schocher
2010-04-07 22:15 ` Wolfgang Denk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.