From: Saul Wold <sgw@linux.intel.com>
To: gary.robertson@linaro.org, openembedded-core@lists.openembedded.org
Cc: mike.holmes@linaro.org, clark.williams@gmail.com
Subject: Re: [PATCH V3 1/1] rt-tests: bump version 0.87 => 0.89
Date: Tue, 13 May 2014 21:08:20 -0700 [thread overview]
Message-ID: <5372EC34.6010703@linux.intel.com> (raw)
In-Reply-To: <536D4FB7.6060709@linux.intel.com>
On 05/09/2014 02:59 PM, Saul Wold wrote:
> On 04/24/2014 03:09 PM, gary.robertson@linaro.org wrote:
>> From: Anders Roxell <anders.roxell@linaro.org>
>>
>> cyclictest was updated to correct some problems with CPU affinity
>> selection
>> and display of help and/or execution details.
>> These patches were accepted by the maintainer of the cyclictest utility.
>> The changes were reflected in an updated release of rt-tests - v0.89
>> The cyclictest changes were successfully tested on both an ARM v7 and
>> x86_64
>> host environment.
>> The OE recipe was updated locally to incorporate the newer rt-tests
>> release
>> and the resulting builds were verified for the same ARM v7 target
>> and for qemux86.
>> Patch files obsoleted by the rt-tests 0.89 release were removed from
>> the recipe
>> deleted:
>> meta/recipes-rt/rt-tests/files/0001-rt-tests-Allow-for-user-specified-PYLIB.patch
>>
>> deleted:
>> meta/recipes-rt/rt-tests/files/0002-rt-tests-Break-out-install_hwlatdetect.patch
>>
> Did you test build hwlatdetect? This seems to break the install process
> for hwlatdetect which was part of this patch.
>
> There is also some additional files installed but not shipped in
> /usr/src/backfile.
>
> Please test with hwlatdetect also.
>
This issue has not been addressed yet and is causing build failures, can
you please look into this.
> ERROR: Function failed: do_install (log file is located at /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/work/x86-pokymllib32-linux/lib32-hwlatdetect/0.85-r0/temp/log.do_install.7871)
> ERROR: Logfile of failure stored in: /home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/work/x86-pokymllib32-linux/lib32-hwlatdetect/0.85-r0/temp/log.do_install.7871
> Log data follows:
> | DEBUG: Executing shell function do_install
> | NOTE: make -j 16 NUMA=0 PYLIB=/usr/lib/python2.7/dist-packages install_hwlatdetect DESTDIR=/home/pokybuild/yocto-autobuilder/yocto-slave/nightly-world/build/build/tmp/work/x86-pokymllib32-linux/lib32-hwlatdetect/0.85-r0/image SBINDIR=/usr/sbin MANDIR=/usr/share/man INCLUDEDIR=/usr/include
> | make: *** No rule to make target `install_hwlatdetect'. Stop.
> | ERROR: oe_runmake failed
Thanks
Sau!
> Thanks
> Sau!
>
>> deleted:
>> meta/recipes-rt/rt-tests/files/added-missing-dependencies.patch
>>
>> Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
>> Signed-off-by: Gary S. Robertson <gary.robertson@linaro.org>
>> ---
>> ...1-rt-tests-Allow-for-user-specified-PYLIB.patch | 35 ----------
>> ...02-rt-tests-Break-out-install_hwlatdetect.patch | 68
>> --------------------
>> .../files/added-missing-dependencies.patch | 50
>> --------------
>> meta/recipes-rt/rt-tests/rt-tests.inc | 7 +-
>> .../{rt-tests_0.87.bb => rt-tests_0.89.bb} | 0
>> 5 files changed, 2 insertions(+), 158 deletions(-)
>> delete mode 100644
>> meta/recipes-rt/rt-tests/files/0001-rt-tests-Allow-for-user-specified-PYLIB.patch
>>
>> delete mode 100644
>> meta/recipes-rt/rt-tests/files/0002-rt-tests-Break-out-install_hwlatdetect.patch
>>
>> delete mode 100644
>> meta/recipes-rt/rt-tests/files/added-missing-dependencies.patch
>> rename meta/recipes-rt/rt-tests/{rt-tests_0.87.bb =>
>> rt-tests_0.89.bb} (100%)
>>
>> diff --git
>> a/meta/recipes-rt/rt-tests/files/0001-rt-tests-Allow-for-user-specified-PYLIB.patch
>> b/meta/recipes-rt/rt-tests/files/0001-rt-tests-Allow-for-user-specified-PYLIB.patch
>>
>> deleted file mode 100644
>> index 8b493eb..0000000
>> ---
>> a/meta/recipes-rt/rt-tests/files/0001-rt-tests-Allow-for-user-specified-PYLIB.patch
>>
>> +++ /dev/null
>> @@ -1,35 +0,0 @@
>> -From 66765522b634952346f1a3ab7d00c7222a1f9361 Mon Sep 17 00:00:00 2001
>> -Message-Id:
>> <66765522b634952346f1a3ab7d00c7222a1f9361.1347419597.git.dvhart@linux.intel.com>
>>
>> -From: Darren Hart <dvhart@linux.intel.com>
>> -Date: Tue, 11 Sep 2012 15:19:30 -0700
>> -Subject: [PATCH 1/2] rt-tests: Allow for user-specified PYLIB
>> -
>> -Upstream-Status: Submitted
>> -
>> -Allow users (build systems) to specify PYLIB. This allows for a
>> -cross-build-system to specify the target PYLIB rather than the host
>> -PYLIB.
>> -
>> -Signed-off-by: Darren Hart <dvhart@linux.intel.com>
>> -CC: Clark Williams <williams@redhat.com>
>> -CC: John Kacur <jkacur@redhat.com>
>> ----
>> - Makefile | 2 +-
>> - 1 file changed, 1 insertion(+), 1 deletion(-)
>> -
>> -diff --git a/Makefile b/Makefile
>> -index 3a82407..61e2f9f 100644
>> ---- a/Makefile
>> -+++ b/Makefile
>> -@@ -23,7 +23,7 @@ endif
>> - CFLAGS ?= -D_GNU_SOURCE -Wall -Wno-nonnull -Isrc/include
>> - LDFLAGS ?=
>> -
>> --PYLIB := $(shell python -c 'import distutils.sysconfig; print
>> distutils.sysconfig.get_python_lib()')
>> -+PYLIB ?= $(shell python -c 'import distutils.sysconfig; print
>> distutils.sysconfig.get_python_lib()')
>> -
>> - ifndef DEBUG
>> - CFLAGS += -O2
>> ---
>> -1.7.11.4
>> -
>> diff --git
>> a/meta/recipes-rt/rt-tests/files/0002-rt-tests-Break-out-install_hwlatdetect.patch
>> b/meta/recipes-rt/rt-tests/files/0002-rt-tests-Break-out-install_hwlatdetect.patch
>>
>> deleted file mode 100644
>> index bc6136f..0000000
>> ---
>> a/meta/recipes-rt/rt-tests/files/0002-rt-tests-Break-out-install_hwlatdetect.patch
>>
>> +++ /dev/null
>> @@ -1,68 +0,0 @@
>> -From af93e580d005a2bba6ed36528003af4cf631adb8 Mon Sep 17 00:00:00 2001
>> -Message-Id:
>> <af93e580d005a2bba6ed36528003af4cf631adb8.1347419597.git.dvhart@linux.intel.com>
>>
>> -In-Reply-To:
>> <66765522b634952346f1a3ab7d00c7222a1f9361.1347419597.git.dvhart@linux.intel.com>
>>
>> -References:
>> <66765522b634952346f1a3ab7d00c7222a1f9361.1347419597.git.dvhart@linux.intel.com>
>>
>> -From: Darren Hart <dvhart@linux.intel.com>
>> -Date: Tue, 11 Sep 2012 14:51:10 -0700
>> -Subject: [PATCH 2/2] rt-tests: Break out install_hwlatdetect
>> -
>> -Upstream-Status: Submitted
>> -
>> -Allow hwlatdetect to be installed independently of the rest of the
>> -tests. This is convenient for build systems that package it separately
>> -due to the python dependency.
>> -
>> -Signed-off-by: Darren Hart <dvhart@linux.intel.com>
>> -CC: Clark Williams <williams@redhat.com>
>> -CC: John Kacur <jkacur@redhat.com>
>> ----
>> - Makefile | 18 +++++++++++-------
>> - 1 file changed, 11 insertions(+), 7 deletions(-)
>> -
>> -diff --git a/Makefile b/Makefile
>> -index 61e2f9f..636e63b 100644
>> ---- a/Makefile
>> -+++ b/Makefile
>> -@@ -119,21 +119,15 @@ changelog:
>> - git log >ChangeLog
>> -
>> - .PHONY: install
>> --install: all
>> -+install: all install_hwlatdetect
>> - mkdir -p "$(DESTDIR)$(bindir)" "$(DESTDIR)$(mandir)/man4"
>> - mkdir -p "$(DESTDIR)$(srcdir)" "$(DESTDIR)$(mandir)/man8"
>> - cp $(TARGETS) "$(DESTDIR)$(bindir)"
>> -- if test -n "$(PYLIB)" ; then \
>> -- install -D -m 755 src/hwlatdetect/hwlatdetect.py
>> $(DESTDIR)$(PYLIB)/hwlatdetect.py ; \
>> -- rm -f "$(DESTDIR)$(bindir)/hwlatdetect" ; \
>> -- ln -s $(PYLIB)/hwlatdetect.py
>> "$(DESTDIR)$(bindir)/hwlatdetect" ; \
>> -- fi
>> - install -D -m 644 src/backfire/backfire.c
>> "$(DESTDIR)$(srcdir)/backfire/backfire.c"
>> - install -m 644 src/backfire/Makefile
>> "$(DESTDIR)$(srcdir)/backfire/Makefile"
>> - gzip src/backfire/backfire.4 -c
>> >"$(DESTDIR)$(mandir)/man4/backfire.4.gz"
>> - gzip src/cyclictest/cyclictest.8 -c
>> >"$(DESTDIR)$(mandir)/man8/cyclictest.8.gz"
>> - gzip src/pi_tests/pi_stress.8 -c
>> >"$(DESTDIR)$(mandir)/man8/pi_stress.8.gz"
>> -- gzip src/hwlatdetect/hwlatdetect.8 -c
>> >"$(DESTDIR)$(mandir)/man8/hwlatdetect.8.gz"
>> - gzip src/ptsematest/ptsematest.8 -c
>> >"$(DESTDIR)$(mandir)/man8/ptsematest.8.gz"
>> - gzip src/sigwaittest/sigwaittest.8 -c
>> >"$(DESTDIR)$(mandir)/man8/sigwaittest.8.gz"
>> - gzip src/svsematest/svsematest.8 -c
>> >"$(DESTDIR)$(mandir)/man8/svsematest.8.gz"
>> -@@ -141,6 +135,16 @@ install: all
>> - gzip src/backfire/sendme.8 -c
>> >"$(DESTDIR)$(mandir)/man8/sendme.8.gz"
>> - gzip src/hackbench/hackbench.8 -c
>> >"$(DESTDIR)$(mandir)/man8/hackbench.8.gz"
>> -
>> -+.PHONY: install_hwlatdetect
>> -+install_hwlatdetect: hwlatdetect
>> -+ if test -n "$(PYLIB)" ; then \
>> -+ mkdir -p "$(DESTDIR)$(bindir)" "$(DESTDIR)$(mandir)/man8" ; \
>> -+ install -D -m 755 src/hwlatdetect/hwlatdetect.py
>> $(DESTDIR)$(PYLIB)/hwlatdetect.py ; \
>> -+ rm -f "$(DESTDIR)$(bindir)/hwlatdetect" ; \
>> -+ ln -s $(PYLIB)/hwlatdetect.py
>> "$(DESTDIR)$(bindir)/hwlatdetect" ; \
>> -+ gzip src/hwlatdetect/hwlatdetect.8 -c
>> >"$(DESTDIR)$(mandir)/man8/hwlatdetect.8.gz" ; \
>> -+ fi
>> -+
>> - .PHONY: release
>> - release: clean changelog
>> - mkdir -p releases
>> ---
>> -1.7.11.4
>> -
>> diff --git
>> a/meta/recipes-rt/rt-tests/files/added-missing-dependencies.patch
>> b/meta/recipes-rt/rt-tests/files/added-missing-dependencies.patch
>> deleted file mode 100644
>> index e420282..0000000
>> --- a/meta/recipes-rt/rt-tests/files/added-missing-dependencies.patch
>> +++ /dev/null
>> @@ -1,50 +0,0 @@
>> -From 82d28701486ba5a699544a168448bf93b1ccd7b1 Mon Sep 17 00:00:00 2001
>> -From: Jackie Huang <jackie.huang@windriver.com>
>> -Date: Thu, 6 Dec 2012 11:26:14 +0800
>> -Subject: [PATCH] Added missing dependencies
>> -
>> -Upstream-Status: Submitted [linux-rt-users]
>> -
>> -The following targets missed dependency on librttest.a:
>> -pi_stress
>> -rt-migrate-test
>> -hackbench
>> -
>> -Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
>> ----
>> - Makefile | 6 +++---
>> - 1 file changed, 3 insertions(+), 3 deletions(-)
>> -
>> -diff --git a/Makefile b/Makefile
>> -index fd3cdb3..60707a7 100644
>> ---- a/Makefile
>> -+++ b/Makefile
>> -@@ -68,14 +68,14 @@ cyclictest: cyclictest.o librttest.a
>> - signaltest: signaltest.o librttest.a
>> - $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
>> -
>> --pi_stress: pi_stress.o
>> -+pi_stress: pi_stress.o librttest.a
>> - $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
>> -
>> - hwlatdetect: src/hwlatdetect/hwlatdetect.py
>> - chmod +x src/hwlatdetect/hwlatdetect.py
>> - ln -s src/hwlatdetect/hwlatdetect.py hwlatdetect
>> -
>> --rt-migrate-test: rt-migrate-test.o
>> -+rt-migrate-test: rt-migrate-test.o librttest.a
>> - $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
>> -
>> - ptsematest: ptsematest.o librttest.a
>> -@@ -96,7 +96,7 @@ sendme: sendme.o librttest.a
>> - pip_stress: pip_stress.o librttest.a
>> - $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
>> -
>> --hackbench: hackbench.o
>> -+hackbench: hackbench.o librttest.a
>> - $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
>> -
>> - librttest.a: rt-utils.o error.o rt-get_cpu.o
>> ---
>> -1.7.9.5
>> -
>> diff --git a/meta/recipes-rt/rt-tests/rt-tests.inc
>> b/meta/recipes-rt/rt-tests/rt-tests.inc
>> index 81f4f2b..1d876b0 100644
>> --- a/meta/recipes-rt/rt-tests/rt-tests.inc
>> +++ b/meta/recipes-rt/rt-tests/rt-tests.inc
>> @@ -1,10 +1,7 @@
>> -# Version v0.87
>> -SRCREV = "b0413ae5ed802004fb0c4af74a1757381fd2b91f"
>> +# Version v0.89
>> +SRCREV = "9164ec4db2645f52ffdd20e6d1b72bb0411ab40e"
>>
>> SRC_URI =
>> "git://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git \
>> - file://0001-rt-tests-Allow-for-user-specified-PYLIB.patch \
>> - file://0002-rt-tests-Break-out-install_hwlatdetect.patch \
>> - file://added-missing-dependencies.patch \
>> file://hackbench-fix-error-check.patch \
>> "
>>
>> diff --git a/meta/recipes-rt/rt-tests/rt-tests_0.87.bb
>> b/meta/recipes-rt/rt-tests/rt-tests_0.89.bb
>> similarity index 100%
>> rename from meta/recipes-rt/rt-tests/rt-tests_0.87.bb
>> rename to meta/recipes-rt/rt-tests/rt-tests_0.89.bb
>>
next prev parent reply other threads:[~2014-05-14 4:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-18 20:12 [PATCH] rt-tests: bump version 0.87 => 0.89 gary.robertson
2014-04-18 20:12 ` gary.robertson
2014-04-18 20:15 ` Khem Raj
2014-04-18 20:17 ` Saul Wold
2014-04-23 16:59 ` [PATCH V2 1/1] " gary.robertson
2014-04-23 16:59 ` [PATCH] " gary.robertson
2014-05-08 21:24 ` Gary Robertson
2014-05-08 22:09 ` Richard Purdie
2014-05-11 17:05 ` Richard Purdie
2014-04-24 22:09 ` [PATCH V3 0/1] " gary.robertson
2014-04-24 22:09 ` [PATCH V3 1/1] " gary.robertson
2014-05-09 21:59 ` Saul Wold
2014-05-14 4:08 ` Saul Wold [this message]
2014-05-14 13:04 ` Gary Robertson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5372EC34.6010703@linux.intel.com \
--to=sgw@linux.intel.com \
--cc=clark.williams@gmail.com \
--cc=gary.robertson@linaro.org \
--cc=mike.holmes@linaro.org \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.