diff for duplicates of <53AA7E01.3090800@free-electrons.com>
diff --git a/a/1.txt b/N1/1.txt
index 53b86f6..6eee52b 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -26,12 +26,12 @@ On 25/06/2014 09:35, Bo Shen wrote:
>>>> +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
>>>> @@ -34,6 +34,22 @@
>>>>
->>>> macb0: ethernet@f0028000 {
+>>>> macb0: ethernet at f0028000 {
>>>> phy-mode = "rgmii";
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> +
->>>> + ethernet-phy@1 {
+>>>> + ethernet-phy at 1 {
>>>
>>> The GMAC PHY address is 0x7 while not 0x1.
>>
@@ -41,7 +41,7 @@ On 25/06/2014 09:35, Bo Shen wrote:
> 0x1), while not GMAC PHY. You should check the sama5d3x-CM schematic.
I checked "Figure 5-16. RONETIX GEthernet ETH0" and "Figure 5-15. EMBEST
-GEthernet ETH0" of this document "11180A–ATARM–30-Jan-13", which,
+GEthernet ETH0" of this document "11180A?ATARM?30-Jan-13", which,
AFAICT, are RGMII phy schematics of CPU Modules.
I might have an old datasheet though.
If this is the case could you point out the new one ?
diff --git a/a/content_digest b/N1/content_digest
index b827849..a4a85ff 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -14,24 +14,16 @@
"ref\00053AA7BC6.3020902\@atmel.com\0"
]
[
- "From\0Boris BREZILLON <boris.brezillon\@free-electrons.com>\0"
+ "From\0boris.brezillon\@free-electrons.com (Boris BREZILLON)\0"
]
[
- "Subject\0Re: [PATCH 1/2] ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards\0"
+ "Subject\0[PATCH 1/2] ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek boards\0"
]
[
"Date\0Wed, 25 Jun 2014 09:45:05 +0200\0"
]
[
- "To\0Bo Shen <voice.shen\@atmel.com>\0"
-]
-[
- "Cc\0Nicolas Ferre <nicolas.ferre\@atmel.com>",
- " Jean-Christophe Plagniol-Villard <plagnioj\@jcrosoft.com>",
- " Alexandre Belloni <alexandre.belloni\@free-electrons.com>",
- " Andrew Victor <linux\@maxim.org.za>",
- " linux-kernel\@vger.kernel.org",
- " linux-arm-kernel\@lists.infradead.org\0"
+ "To\0linux-arm-kernel\@lists.infradead.org\0"
]
[
"\0000:1\0"
@@ -68,12 +60,12 @@
">>>> +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi\n",
">>>> \@\@ -34,6 +34,22 \@\@\n",
">>>>\n",
- ">>>> macb0: ethernet\@f0028000 {\n",
+ ">>>> macb0: ethernet at f0028000 {\n",
">>>> phy-mode = \"rgmii\";\n",
">>>> + #address-cells = <1>;\n",
">>>> + #size-cells = <0>;\n",
">>>> +\n",
- ">>>> + ethernet-phy\@1 {\n",
+ ">>>> + ethernet-phy at 1 {\n",
">>>\n",
">>> The GMAC PHY address is 0x7 while not 0x1.\n",
">>\n",
@@ -83,7 +75,7 @@
"> 0x1), while not GMAC PHY. You should check the sama5d3x-CM schematic.\n",
"\n",
"I checked \"Figure 5-16. RONETIX GEthernet ETH0\" and \"Figure 5-15. EMBEST\n",
- "GEthernet ETH0\" of this document \"11180A\342\200\223ATARM\342\200\22330-Jan-13\", which,\n",
+ "GEthernet ETH0\" of this document \"11180A?ATARM?30-Jan-13\", which,\n",
"AFAICT, are RGMII phy schematics of CPU Modules.\n",
"I might have an old datasheet though.\n",
"If this is the case could you point out the new one ?\n",
@@ -135,4 +127,4 @@
"http://free-electrons.com"
]
-3f2f2146a009f3ee61546a6b7fec04aa1be8522290b83c583f36269ebc744659
+357b511d2d69d03d9c8b9688d816ad6ac93a6c89d87f1e8a6273af5d9cda0ac3
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.