From: Kukjin Kim <kgene.kim@samsung.com> To: Tomasz Figa <t.figa@samsung.com> Cc: linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, "Kukjin Kim" <kgene.kim@samsung.com>, "Arnd Bergmann" <arnd@arndb.de>, "Olof Johansson" <olof@lixom.net>, "Marek Szyprowski" <m.szyprowski@samsung.com>, "Mark Brown" <broonie@kernel.org>, "Heiko Stübner" <heiko@sntech.de>, "Tomasz Figa" <tomasz.figa@gmail.com> Subject: Re: [PATCH 17/19] gpio: samsung: Remove legacy support of S5PV210 Date: Wed, 16 Jul 2014 08:52:13 +0900 [thread overview] Message-ID: <53C5BEAD.7080605@samsung.com> (raw) In-Reply-To: <1404496099-26708-18-git-send-email-t.figa@samsung.com> On 07/05/14 02:48, Tomasz Figa wrote: > GPIO support of S5PV210 SoC is now fully handled by pinctrl-samsung > driver making the old code in gpio-samsung driver unused. This patch > removes it which will also let us remove more code from arch subtree. > > Signed-off-by: Tomasz Figa<t.figa@samsung.com> > Cc: Linus Walleij<linus.walleij@linaro.org> Hi Linus, I've applied this in samsung tree for 3.17 if you have any comments, please kindly let me know. Thanks, Kukjin > Cc: Alexandre Courbot<gnurou@gmail.com> > Cc: linux-gpio@vger.kernel.org > --- > drivers/gpio/gpio-samsung.c | 240 -------------------------------------------- > 1 file changed, 240 deletions(-) > > diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c > index 7d4281e..27298fd 100644 > --- a/drivers/gpio/gpio-samsung.c > +++ b/drivers/gpio/gpio-samsung.c > @@ -1169,234 +1169,9 @@ static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = { > #endif > }; > > -/* > - * Followings are the gpio banks in S5PV210/S5PC110 > - * > - * The 'config' member when left to NULL, is initialized to the default > - * structure samsung_gpio_cfgs[3] in the init function below. > - * > - * The 'base' member is also initialized in the init function below. > - * Note: The initialization of 'base' member of samsung_gpio_chip structure > - * uses the above macro and depends on the banks being listed in order here. > - */ > - > -static struct samsung_gpio_chip s5pv210_gpios_4bit[] = { > -#ifdef CONFIG_CPU_S5PV210 > - { > - .chip = { > - .base = S5PV210_GPA0(0), > - .ngpio = S5PV210_GPIO_A0_NR, > - .label = "GPA0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPA1(0), > - .ngpio = S5PV210_GPIO_A1_NR, > - .label = "GPA1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPB(0), > - .ngpio = S5PV210_GPIO_B_NR, > - .label = "GPB", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPC0(0), > - .ngpio = S5PV210_GPIO_C0_NR, > - .label = "GPC0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPC1(0), > - .ngpio = S5PV210_GPIO_C1_NR, > - .label = "GPC1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPD0(0), > - .ngpio = S5PV210_GPIO_D0_NR, > - .label = "GPD0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPD1(0), > - .ngpio = S5PV210_GPIO_D1_NR, > - .label = "GPD1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPE0(0), > - .ngpio = S5PV210_GPIO_E0_NR, > - .label = "GPE0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPE1(0), > - .ngpio = S5PV210_GPIO_E1_NR, > - .label = "GPE1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPF0(0), > - .ngpio = S5PV210_GPIO_F0_NR, > - .label = "GPF0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPF1(0), > - .ngpio = S5PV210_GPIO_F1_NR, > - .label = "GPF1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPF2(0), > - .ngpio = S5PV210_GPIO_F2_NR, > - .label = "GPF2", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPF3(0), > - .ngpio = S5PV210_GPIO_F3_NR, > - .label = "GPF3", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPG0(0), > - .ngpio = S5PV210_GPIO_G0_NR, > - .label = "GPG0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPG1(0), > - .ngpio = S5PV210_GPIO_G1_NR, > - .label = "GPG1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPG2(0), > - .ngpio = S5PV210_GPIO_G2_NR, > - .label = "GPG2", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPG3(0), > - .ngpio = S5PV210_GPIO_G3_NR, > - .label = "GPG3", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPI(0), > - .ngpio = S5PV210_GPIO_I_NR, > - .label = "GPI", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPJ0(0), > - .ngpio = S5PV210_GPIO_J0_NR, > - .label = "GPJ0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPJ1(0), > - .ngpio = S5PV210_GPIO_J1_NR, > - .label = "GPJ1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPJ2(0), > - .ngpio = S5PV210_GPIO_J2_NR, > - .label = "GPJ2", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPJ3(0), > - .ngpio = S5PV210_GPIO_J3_NR, > - .label = "GPJ3", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPJ4(0), > - .ngpio = S5PV210_GPIO_J4_NR, > - .label = "GPJ4", > - }, > - }, { > - .chip = { > - .base = S5PV210_MP01(0), > - .ngpio = S5PV210_GPIO_MP01_NR, > - .label = "MP01", > - }, > - }, { > - .chip = { > - .base = S5PV210_MP02(0), > - .ngpio = S5PV210_GPIO_MP02_NR, > - .label = "MP02", > - }, > - }, { > - .chip = { > - .base = S5PV210_MP03(0), > - .ngpio = S5PV210_GPIO_MP03_NR, > - .label = "MP03", > - }, > - }, { > - .chip = { > - .base = S5PV210_MP04(0), > - .ngpio = S5PV210_GPIO_MP04_NR, > - .label = "MP04", > - }, > - }, { > - .chip = { > - .base = S5PV210_MP05(0), > - .ngpio = S5PV210_GPIO_MP05_NR, > - .label = "MP05", > - }, > - }, { > - .base = (S5P_VA_GPIO + 0xC00), > - .irq_base = IRQ_EINT(0), > - .chip = { > - .base = S5PV210_GPH0(0), > - .ngpio = S5PV210_GPIO_H0_NR, > - .label = "GPH0", > - .to_irq = samsung_gpiolib_to_irq, > - }, > - }, { > - .base = (S5P_VA_GPIO + 0xC20), > - .irq_base = IRQ_EINT(8), > - .chip = { > - .base = S5PV210_GPH1(0), > - .ngpio = S5PV210_GPIO_H1_NR, > - .label = "GPH1", > - .to_irq = samsung_gpiolib_to_irq, > - }, > - }, { > - .base = (S5P_VA_GPIO + 0xC40), > - .irq_base = IRQ_EINT(16), > - .chip = { > - .base = S5PV210_GPH2(0), > - .ngpio = S5PV210_GPIO_H2_NR, > - .label = "GPH2", > - .to_irq = samsung_gpiolib_to_irq, > - }, > - }, { > - .base = (S5P_VA_GPIO + 0xC60), > - .irq_base = IRQ_EINT(24), > - .chip = { > - .base = S5PV210_GPH3(0), > - .ngpio = S5PV210_GPIO_H3_NR, > - .label = "GPH3", > - .to_irq = samsung_gpiolib_to_irq, > - }, > - }, > -#endif > -}; > - > /* TODO: cleanup soc_is_* */ > static __init int samsung_gpiolib_init(void) > { > - struct samsung_gpio_chip *chip; > - int i, nr_chips; > - int group = 0; > - > /* > * Currently there are two drivers that can provide GPIO support for > * Samsung SoCs. For device tree enabled platforms, the new > @@ -1420,21 +1195,6 @@ static __init int samsung_gpiolib_init(void) > S3C64XX_VA_GPIO); > samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2, > ARRAY_SIZE(s3c64xx_gpios_4bit2)); > - } else if (soc_is_s5pv210()) { > - group = 0; > - chip = s5pv210_gpios_4bit; > - nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit); > - > - for (i = 0; i< nr_chips; i++, chip++) { > - if (!chip->config) { > - chip->config =&samsung_gpio_cfgs[3]; > - chip->group = group++; > - } > - } > - samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO); > -#if defined(CONFIG_CPU_S5PV210)&& defined(CONFIG_S5P_GPIO_INT) > - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); > -#endif > } else { > WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n"); > return -ENODEV;
WARNING: multiple messages have this Message-ID (diff)
From: kgene.kim@samsung.com (Kukjin Kim) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 17/19] gpio: samsung: Remove legacy support of S5PV210 Date: Wed, 16 Jul 2014 08:52:13 +0900 [thread overview] Message-ID: <53C5BEAD.7080605@samsung.com> (raw) In-Reply-To: <1404496099-26708-18-git-send-email-t.figa@samsung.com> On 07/05/14 02:48, Tomasz Figa wrote: > GPIO support of S5PV210 SoC is now fully handled by pinctrl-samsung > driver making the old code in gpio-samsung driver unused. This patch > removes it which will also let us remove more code from arch subtree. > > Signed-off-by: Tomasz Figa<t.figa@samsung.com> > Cc: Linus Walleij<linus.walleij@linaro.org> Hi Linus, I've applied this in samsung tree for 3.17 if you have any comments, please kindly let me know. Thanks, Kukjin > Cc: Alexandre Courbot<gnurou@gmail.com> > Cc: linux-gpio at vger.kernel.org > --- > drivers/gpio/gpio-samsung.c | 240 -------------------------------------------- > 1 file changed, 240 deletions(-) > > diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c > index 7d4281e..27298fd 100644 > --- a/drivers/gpio/gpio-samsung.c > +++ b/drivers/gpio/gpio-samsung.c > @@ -1169,234 +1169,9 @@ static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = { > #endif > }; > > -/* > - * Followings are the gpio banks in S5PV210/S5PC110 > - * > - * The 'config' member when left to NULL, is initialized to the default > - * structure samsung_gpio_cfgs[3] in the init function below. > - * > - * The 'base' member is also initialized in the init function below. > - * Note: The initialization of 'base' member of samsung_gpio_chip structure > - * uses the above macro and depends on the banks being listed in order here. > - */ > - > -static struct samsung_gpio_chip s5pv210_gpios_4bit[] = { > -#ifdef CONFIG_CPU_S5PV210 > - { > - .chip = { > - .base = S5PV210_GPA0(0), > - .ngpio = S5PV210_GPIO_A0_NR, > - .label = "GPA0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPA1(0), > - .ngpio = S5PV210_GPIO_A1_NR, > - .label = "GPA1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPB(0), > - .ngpio = S5PV210_GPIO_B_NR, > - .label = "GPB", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPC0(0), > - .ngpio = S5PV210_GPIO_C0_NR, > - .label = "GPC0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPC1(0), > - .ngpio = S5PV210_GPIO_C1_NR, > - .label = "GPC1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPD0(0), > - .ngpio = S5PV210_GPIO_D0_NR, > - .label = "GPD0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPD1(0), > - .ngpio = S5PV210_GPIO_D1_NR, > - .label = "GPD1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPE0(0), > - .ngpio = S5PV210_GPIO_E0_NR, > - .label = "GPE0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPE1(0), > - .ngpio = S5PV210_GPIO_E1_NR, > - .label = "GPE1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPF0(0), > - .ngpio = S5PV210_GPIO_F0_NR, > - .label = "GPF0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPF1(0), > - .ngpio = S5PV210_GPIO_F1_NR, > - .label = "GPF1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPF2(0), > - .ngpio = S5PV210_GPIO_F2_NR, > - .label = "GPF2", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPF3(0), > - .ngpio = S5PV210_GPIO_F3_NR, > - .label = "GPF3", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPG0(0), > - .ngpio = S5PV210_GPIO_G0_NR, > - .label = "GPG0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPG1(0), > - .ngpio = S5PV210_GPIO_G1_NR, > - .label = "GPG1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPG2(0), > - .ngpio = S5PV210_GPIO_G2_NR, > - .label = "GPG2", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPG3(0), > - .ngpio = S5PV210_GPIO_G3_NR, > - .label = "GPG3", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPI(0), > - .ngpio = S5PV210_GPIO_I_NR, > - .label = "GPI", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPJ0(0), > - .ngpio = S5PV210_GPIO_J0_NR, > - .label = "GPJ0", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPJ1(0), > - .ngpio = S5PV210_GPIO_J1_NR, > - .label = "GPJ1", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPJ2(0), > - .ngpio = S5PV210_GPIO_J2_NR, > - .label = "GPJ2", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPJ3(0), > - .ngpio = S5PV210_GPIO_J3_NR, > - .label = "GPJ3", > - }, > - }, { > - .chip = { > - .base = S5PV210_GPJ4(0), > - .ngpio = S5PV210_GPIO_J4_NR, > - .label = "GPJ4", > - }, > - }, { > - .chip = { > - .base = S5PV210_MP01(0), > - .ngpio = S5PV210_GPIO_MP01_NR, > - .label = "MP01", > - }, > - }, { > - .chip = { > - .base = S5PV210_MP02(0), > - .ngpio = S5PV210_GPIO_MP02_NR, > - .label = "MP02", > - }, > - }, { > - .chip = { > - .base = S5PV210_MP03(0), > - .ngpio = S5PV210_GPIO_MP03_NR, > - .label = "MP03", > - }, > - }, { > - .chip = { > - .base = S5PV210_MP04(0), > - .ngpio = S5PV210_GPIO_MP04_NR, > - .label = "MP04", > - }, > - }, { > - .chip = { > - .base = S5PV210_MP05(0), > - .ngpio = S5PV210_GPIO_MP05_NR, > - .label = "MP05", > - }, > - }, { > - .base = (S5P_VA_GPIO + 0xC00), > - .irq_base = IRQ_EINT(0), > - .chip = { > - .base = S5PV210_GPH0(0), > - .ngpio = S5PV210_GPIO_H0_NR, > - .label = "GPH0", > - .to_irq = samsung_gpiolib_to_irq, > - }, > - }, { > - .base = (S5P_VA_GPIO + 0xC20), > - .irq_base = IRQ_EINT(8), > - .chip = { > - .base = S5PV210_GPH1(0), > - .ngpio = S5PV210_GPIO_H1_NR, > - .label = "GPH1", > - .to_irq = samsung_gpiolib_to_irq, > - }, > - }, { > - .base = (S5P_VA_GPIO + 0xC40), > - .irq_base = IRQ_EINT(16), > - .chip = { > - .base = S5PV210_GPH2(0), > - .ngpio = S5PV210_GPIO_H2_NR, > - .label = "GPH2", > - .to_irq = samsung_gpiolib_to_irq, > - }, > - }, { > - .base = (S5P_VA_GPIO + 0xC60), > - .irq_base = IRQ_EINT(24), > - .chip = { > - .base = S5PV210_GPH3(0), > - .ngpio = S5PV210_GPIO_H3_NR, > - .label = "GPH3", > - .to_irq = samsung_gpiolib_to_irq, > - }, > - }, > -#endif > -}; > - > /* TODO: cleanup soc_is_* */ > static __init int samsung_gpiolib_init(void) > { > - struct samsung_gpio_chip *chip; > - int i, nr_chips; > - int group = 0; > - > /* > * Currently there are two drivers that can provide GPIO support for > * Samsung SoCs. For device tree enabled platforms, the new > @@ -1420,21 +1195,6 @@ static __init int samsung_gpiolib_init(void) > S3C64XX_VA_GPIO); > samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2, > ARRAY_SIZE(s3c64xx_gpios_4bit2)); > - } else if (soc_is_s5pv210()) { > - group = 0; > - chip = s5pv210_gpios_4bit; > - nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit); > - > - for (i = 0; i< nr_chips; i++, chip++) { > - if (!chip->config) { > - chip->config =&samsung_gpio_cfgs[3]; > - chip->group = group++; > - } > - } > - samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO); > -#if defined(CONFIG_CPU_S5PV210)&& defined(CONFIG_S5P_GPIO_INT) > - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); > -#endif > } else { > WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n"); > return -ENODEV;
next prev parent reply other threads:[~2014-07-15 23:52 UTC|newest] Thread overview: 141+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-07-04 17:48 [PATCH 00/19] ARM: SAMSUNG: S5PV210 platform clean-up Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 01/19] clk: samsung: Add clock driver for S5PV210 and compatible SoCs Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 02/19] ARM: s5pv210: Migrate clock handling to Common Clock Framework Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 03/19] cpufreq: s3c24xx: Remove some dead code Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 04/19] serial: samsung: Remove support for legacy clock code Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-16 9:27 ` Paul Bolle 2014-07-16 9:27 ` Paul Bolle 2014-07-16 12:43 ` Tomasz Figa 2014-07-16 12:43 ` Tomasz Figa 2014-07-16 14:26 ` Paul Bolle 2014-07-16 14:26 ` Paul Bolle 2014-07-16 14:35 ` Paul Bolle 2014-07-16 14:35 ` Paul Bolle 2014-07-16 14:43 ` Tomasz Figa 2014-07-16 14:43 ` Tomasz Figa 2014-09-04 9:39 ` Paul Bolle 2014-09-04 9:39 ` Paul Bolle 2014-09-04 9:42 ` Paul Bolle 2014-09-04 9:42 ` Paul Bolle 2014-07-04 17:48 ` [PATCH 05/19] ARM: SAMSUNG: Remove " Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 06/19] clk: samsung: Add S5PV210 Audio Subsystem clock driver Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 07/19] phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 08/19] ARM: s5pv210: Add board file for boot using Device Tree Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 09/19] ARM: Samsung: DT: Add Device tree for s5pv210 Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 10/19] ARM: Samsung: DT: Add Device tree for S5PC110/S5PV210 Boards Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 11/19] ARM: S5PV210: Remove support for board files Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-16 10:04 ` Paul Bolle 2014-07-16 10:04 ` Paul Bolle 2014-07-16 12:53 ` Tomasz Figa 2014-07-16 12:53 ` Tomasz Figa 2014-09-04 10:05 ` Paul Bolle 2014-09-04 10:05 ` Paul Bolle 2014-09-04 16:02 ` Arnd Bergmann 2014-09-04 16:02 ` Arnd Bergmann 2014-09-05 12:04 ` Paul Bolle 2014-09-05 12:04 ` Paul Bolle 2014-09-05 12:28 ` Arnd Bergmann 2014-09-05 12:28 ` Arnd Bergmann 2014-09-18 9:43 ` [PATCH] ASoC: samsung: Remove goni or aquila with the WM8994 Paul Bolle 2014-09-18 9:43 ` Paul Bolle 2014-09-18 17:57 ` Mark Brown 2014-09-18 17:57 ` Mark Brown 2014-09-18 21:57 ` Paul Bolle 2014-09-18 21:57 ` Paul Bolle 2014-09-23 1:04 ` Mark Brown 2014-09-23 1:04 ` Mark Brown 2014-09-24 20:27 ` Paul Bolle 2014-09-24 20:27 ` Paul Bolle 2014-09-18 10:42 ` [PATCH] ASoC: samsung: Remove PCM support for WM8580 on SMDK Paul Bolle 2014-09-18 10:42 ` Paul Bolle 2014-09-18 17:59 ` Mark Brown 2014-09-18 17:59 ` Mark Brown 2014-09-18 17:59 ` Mark Brown 2014-07-04 17:48 ` [PATCH 12/19] ARM: S5PV210: Untie PM support from legacy code Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 13/19] ARM: s5pv210: move debug-macro.S into the common space Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-15 23:54 ` Kukjin Kim 2014-07-15 23:54 ` Kukjin Kim 2014-07-16 0:53 ` Kukjin Kim 2014-07-16 0:53 ` Kukjin Kim 2014-07-16 0:56 ` Tomasz Figa 2014-07-16 0:56 ` Tomasz Figa 2014-07-18 19:38 ` Kukjin Kim 2014-07-18 19:38 ` Kukjin Kim 2014-07-18 23:25 ` Tomasz Figa 2014-07-18 23:25 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 14/19] ARM: s5pv210: Register cpufreq platform device Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 15/19] cpufreq: s5pv210: Make the driver multiplatform aware Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 16/19] ARM: s5pv210: Enable multi-platform build support Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` [PATCH 17/19] gpio: samsung: Remove legacy support of S5PV210 Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-15 23:52 ` Kukjin Kim [this message] 2014-07-15 23:52 ` Kukjin Kim 2014-07-04 17:48 ` [PATCH 18/19] ARM: SAMSUNG: Remove remaining legacy code Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 20:23 ` Arnd Bergmann 2014-07-04 20:23 ` Arnd Bergmann 2014-07-08 14:10 ` Tomasz Figa 2014-07-08 14:10 ` Tomasz Figa 2014-07-16 9:47 ` Paul Bolle 2014-07-16 9:47 ` Paul Bolle 2014-07-16 12:56 ` Tomasz Figa 2014-07-16 12:56 ` Tomasz Figa 2014-07-17 10:10 ` Paul Bolle 2014-07-17 10:10 ` Paul Bolle 2014-07-17 10:12 ` Paul Bolle 2014-07-17 10:12 ` Paul Bolle 2014-07-16 10:15 ` Paul Bolle 2014-07-16 10:15 ` Paul Bolle 2014-07-16 12:58 ` Tomasz Figa 2014-07-16 12:58 ` Tomasz Figa 2014-09-04 10:16 ` Paul Bolle 2014-09-04 10:16 ` Paul Bolle 2014-09-18 19:29 ` Paul Bolle 2014-09-18 19:29 ` Paul Bolle 2014-09-18 19:33 ` Tomasz Figa 2014-09-18 19:33 ` Tomasz Figa 2014-07-16 10:24 ` Paul Bolle 2014-07-16 10:24 ` Paul Bolle 2014-07-16 13:00 ` Tomasz Figa 2014-07-16 13:00 ` Tomasz Figa 2014-09-04 10:08 ` Paul Bolle 2014-09-04 10:08 ` Paul Bolle 2014-09-04 16:03 ` Arnd Bergmann 2014-09-04 16:03 ` Arnd Bergmann 2014-09-18 8:57 ` [PATCH] gpio: samsung: Remove remaining check for CONFIG_S5P_GPIO_DRVSTR Paul Bolle 2014-09-18 19:34 ` Tomasz Figa 2014-09-23 15:42 ` Linus Walleij 2014-07-04 17:48 ` [PATCH 19/19] clk: samsung: s5pv210: Remove legacy board support Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:48 ` Tomasz Figa 2014-07-04 17:53 ` [PATCH 00/19] ARM: SAMSUNG: S5PV210 platform clean-up Tomasz Figa 2014-07-04 17:53 ` Tomasz Figa 2014-07-04 20:15 ` Arnd Bergmann 2014-07-04 20:15 ` Arnd Bergmann 2014-07-12 22:57 ` Kukjin Kim 2014-07-12 22:57 ` Kukjin Kim
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=53C5BEAD.7080605@samsung.com \ --to=kgene.kim@samsung.com \ --cc=arnd@arndb.de \ --cc=broonie@kernel.org \ --cc=heiko@sntech.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=m.szyprowski@samsung.com \ --cc=olof@lixom.net \ --cc=t.figa@samsung.com \ --cc=tomasz.figa@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.