From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hanjun Guo Subject: Re: [PATCH 19/19] Documentation: ACPI for ARM64 Date: Thu, 21 Aug 2014 12:00:40 +0800 Message-ID: <53F56EE8.9050009@linaro.org> References: <1406206825-15590-1-git-send-email-hanjun.guo@linaro.org> <20140812182347.GA4100@arm.com> <2152407.NpXOMHAEH6@vostro.rjw.lan> <53EC2B35.5010302@linaro.org> <20140814102723.GB9039@arm.com> <53EDCE56.6020702@linaro.org> <20140815100113.GA18863@arm.com> <53F1C776.4080501@linaro.org> <20140820221702.GA26287@localhost> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20140820221702.GA26287@localhost> Sender: linux-kernel-owner@vger.kernel.org To: Olof Johansson Cc: Catalin Marinas , "Rafael J. Wysocki" , Mark Rutland , Arnd Bergmann , "linux-arm-kernel@lists.infradead.org" , Mark Brown , Will Deacon , Lv Zheng , Lorenzo Pieralisi , Daniel Lezcano , Robert Moore , "linux-acpi@vger.kernel.org" , "grant.likely@linaro.org" , Charles Garcia-Tobin , Robert Richter , Jason Cooper , Marc Zyngier , Liviu Dudau , Bjorn Helgaas , "graeme.gregory@linaro.org" , Randy List-Id: linux-acpi@vger.kernel.org On 2014-8-21 6:17, Olof Johansson wrote: > On Mon, Aug 18, 2014 at 05:29:26PM +0800, Hanjun Guo wrote: >> On 2014-8-15 18:01, Catalin Marinas wrote: >>> Hanjun, >> >> Hi Catalin, >> >>> >>> On Fri, Aug 15, 2014 at 10:09:42AM +0100, Hanjun Guo wrote: >>>> On 2014-8-14 18:27, Catalin Marinas wrote: >>>>> On Thu, Aug 14, 2014 at 04:21:25AM +0100, Hanjun Guo wrote: >>>>>> On 2014-8-14 7:41, Rafael J. Wysocki wrote: >>>>>>> On Tuesday, August 12, 2014 07:23:47 PM Catalin Marinas wrote: >>>>>>>> If we consider ACPI unusable on ARM but we still want to start merging >>>>>>>> patches, we should rather make the config option depend on BROKEN >>>>>>>> (though if it is that unusable that no real platform can use it, I would >>>>>>>> rather not merge it at all at this stage). >>>>>>> >>>>>>> I agree here. >>>>>>> >>>>>>> I would recommend creating a separate branch for that living outside of the >>>>>>> mainline kernel and merging it when there are real users. >>>>>> >>>>>> Real users will coming soon, we already tested this patch set on real hardware >>>>>> (ARM64 Juno platform), >>>>> >>>>> I don't consider Juno a server platform ;) (but it's good enough for >>>>> development). >>>>> >>>>>> and I think ARM64 server chips and platforms will show up before 3.18 >>>>>> is released. >>>>> >>>>> That's what I've heard/seen. The questions I have are (a) whether >>>>> current ACPI patchset is enough to successfully run Linux on such >>>>> _hardware_ platform (maybe not fully optimised, for example just WFI >>>>> cpuidle) and (b) whether we still want to mandate a DT in the kernel for >>>>> such platforms. >>>> >>>> For (a), this patch set is only for ARM64 core, not including platform >>>> specific device drivers, it will be covered by the binding of _DSD or >>>> explicit definition of PNP ID/ACPI ID(s). >>> >>> So we go back to the discussions we had few months ago in Macau. I'm not >>> concerned about the core ARM and architected peripherals covered by ACPI >>> 5.1 (as long as the current patches get positive technical review). But >>> I'm concerned about the additional bits needed for a real SoC like _DSD >>> definitions, how they get reviewed/accepted (or is it just the vendor's >>> problem?). >> >> As the _DSD patch set sent out by Intel folks, _DSD definitions are just >> DT definitions. To use _DSD or not, I think it depends on OEM use cases, >> we can bring up Juno without _DSD (Graeme is working on that, still need >> some time to clean up the code). >> >>> >>> I think SBSA is too vague to guarantee a kernel image running on a >>> compliant platform without additional (vendor-specific) tweaks. So what >>> I asked for is (1) a document (guide) to define the strict set of ACPI >>> features and bindings needed for a real SoC and (2) proof that the >>> guidelines are enough for real hardware. I think we have (1) under >>> review with some good feedback so far. As for (2), we can probably only >>> discuss Juno openly. I think you could share the additional Juno patches >>> on this list so that reviewers can assess the suitability. If we deem >>> ACPI not (yet) suitable for Juno, is there other platform we could see >>> patches for? >> >> Ok, we will send out all the patches for Juno in next version for review, >> as mentioned above, we still need more time to clean up the code. >> >>> >>>>> Given the answer to (a) and what other features are needed, we may or >>>>> may not mandate (b). We were pretty clear few months ago that (b) is >>>>> still required but at the time we were only openly talking about ACPI >>>>> 5.0 which was lacking many features. I think we need to revisit that >>>>> position based on how usable ACPI 5.1 for ARM (and current kernel >>>>> implementation) is. Would you mind elaborating what an ACPI-only >>>>> platform miss? >>>> >>>> Do you mean something still missing? We still miss some features for >>>> ARM in ACPI, but I think they are not critical, here is the list I can >>>> remember: >>>> - ITS for GICv3/4; >>>> - SMMU support; >>>> - CPU idle control. >>> >>> I agree, these are not critical at this stage. But they only refer to >>> architected peripherals. Is there anything else missing for an SoC? Do >>> we need to define clocks? >> >> No, I prefer not. As we discussed in this thread before, we don't need >> clock definition if we use SBSA compatible UART on Juno. >> >>> >>>> For ACPI 5.1, it fixes many problems for ARM: >>>> - weak definition for GIC, so we introduce visualization, v2m and >>>> part of GICv3/4 (redistributors) support. >>>> - No support for PSCI. Fix it to support PSCI 0.2+; >>>> - Not support for Always-on timer and SBSA-L1 watchdog. >>> >>> These are all good, that's why we shouldn't even talk about ACPI 5.0 in >>> the ARM context. >>> >>>> - How to describe device properties, so _DSD is introduced for >>>> device probe. >>> >>> For the last bullet, is there any review process (at least like what we >>> have for DT bindings)? On top of such process, do we have guidelines and >>> example code on how the Linux support should be implemented. As Olof >>> mentioned, should we see how the DT and ACPI probing paths work >>> together? I really think we should be very clear here and not let >>> vendors invent their own independent methods. >> >> As said above, Intel folks provided some good examples for that, and >> clarified a lot of things: >> >> https://lkml.org/lkml/2014/8/17/10 >> >>> >>>>> I would expect a new server platform designed with ACPI in mind to >>>>> require minimal SoC specific code, so we may only see a few patches >>>>> under drivers/ for such platforms adding ACPI-specific probing (possibly >>>>> new drivers as well if it's a new component). >>>>> >>>>>> For this patch set, DT is the first class citizen at now: >>>>>> >>>>>> a) We can always set CONFIG_ACPI as off in Kconfig, and use DT only; >>>>> >>>>> Not just off but, based on maturity, depend on EXPERT. >>>> >>>> Ok. And don't set ACPI default off (pass acpi=on to enable it)? >>> >>> That's my view, just make it clear ACPI is experimental at the Kconfig >>> level because longer term we won't mandate SoCs to provide both DT and >>> ACPI tables. >> >> I agree with you that if we set ACPI default off, firmware will always >> pass acpi=on if they want to use ACPI, so I think it would be better >> to depend on EXPERT instead. >> >> Olof, is it ok to you too? > > Given that we're going through all these complex schemes to merge code > that isn't ready and keeping it off by default, the answer is really > to continue holding off merging it. > > We already had agreement from earlier this year that we needed to see > several systems in the _market_ that uses ACPI before we have an idea of > how messy they will be in reality. Not eval boards, development systems > or reference designs. None of the current discussion has changed that. I think some SBSA compatible ARM64 server boards would work, such as Seattle board, right? > > There's also the concern that there are still significant portions missing > from 5.1 that won't be there until 5.2 or later. Having experimental > 5.1 support for a few systems (out of tree) is likely going to result in > finding out things that don't work well and should be revised -- if we > don't merge this now then we can avoid having to keep the 5.1 backwards > compatibility forever. Compare this to how we've been regretting some > of the early-defined bindings on DT and wish we didn't have to keep > them around. Please learn from our mistakes. :-) Yes, there are some features missing in ACPI 5.1, and I list them out in previous email replying Catalin, as I said, they are not critical for ARM64 for now. > > On the patches themselves: > > It's great to see the patch sets posted, and they're looking pretty good > -- things are very much heading in the right direction. My main remaining > objection is around how it is integrated with the arch code. I don't > like seeing all the dual code paths that ACPI introduces. It's obvious > that two completely different entities have written the ACPI and the DT > portions of the kernel, and we can't really have that situation for a > brand new architecture like this. > > So, I'd like to see closer integration between the two before code > goes in. More shared code path and driving the differences through data > (or possibly function pointers in places, etc), and fewer completely > separate implementations. I'm working on it, I hope I can achieve that, you know, it needs more efforts to do it :) > > Until then, please keep posting patches for review -- it's useful > to see where it's going. I think it's also useful to get the generic > ACPI integration merged as it has been already (with pieces going in > over time). Sure I will :) Thanks Hanjun From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751016AbaHUECP (ORCPT ); Thu, 21 Aug 2014 00:02:15 -0400 Received: from mail-pd0-f180.google.com ([209.85.192.180]:48084 "EHLO mail-pd0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750726AbaHUECO (ORCPT ); Thu, 21 Aug 2014 00:02:14 -0400 Message-ID: <53F56EE8.9050009@linaro.org> Date: Thu, 21 Aug 2014 12:00:40 +0800 From: Hanjun Guo User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:24.0) Gecko/20100101 Thunderbird/24.6.0 MIME-Version: 1.0 To: Olof Johansson CC: Catalin Marinas , "Rafael J. Wysocki" , Mark Rutland , Arnd Bergmann , "linux-arm-kernel@lists.infradead.org" , Mark Brown , Will Deacon , Lv Zheng , Lorenzo Pieralisi , Daniel Lezcano , Robert Moore , "linux-acpi@vger.kernel.org" , "grant.likely@linaro.org" , Charles Garcia-Tobin , Robert Richter , Jason Cooper , Marc Zyngier , Liviu Dudau , Bjorn Helgaas , "graeme.gregory@linaro.org" , Randy Dunlap , "linux-kernel@vger.kernel.org" , Sudeep Holla Subject: Re: [PATCH 19/19] Documentation: ACPI for ARM64 References: <1406206825-15590-1-git-send-email-hanjun.guo@linaro.org> <20140812182347.GA4100@arm.com> <2152407.NpXOMHAEH6@vostro.rjw.lan> <53EC2B35.5010302@linaro.org> <20140814102723.GB9039@arm.com> <53EDCE56.6020702@linaro.org> <20140815100113.GA18863@arm.com> <53F1C776.4080501@linaro.org> <20140820221702.GA26287@localhost> In-Reply-To: <20140820221702.GA26287@localhost> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 2014-8-21 6:17, Olof Johansson wrote: > On Mon, Aug 18, 2014 at 05:29:26PM +0800, Hanjun Guo wrote: >> On 2014-8-15 18:01, Catalin Marinas wrote: >>> Hanjun, >> >> Hi Catalin, >> >>> >>> On Fri, Aug 15, 2014 at 10:09:42AM +0100, Hanjun Guo wrote: >>>> On 2014-8-14 18:27, Catalin Marinas wrote: >>>>> On Thu, Aug 14, 2014 at 04:21:25AM +0100, Hanjun Guo wrote: >>>>>> On 2014-8-14 7:41, Rafael J. Wysocki wrote: >>>>>>> On Tuesday, August 12, 2014 07:23:47 PM Catalin Marinas wrote: >>>>>>>> If we consider ACPI unusable on ARM but we still want to start merging >>>>>>>> patches, we should rather make the config option depend on BROKEN >>>>>>>> (though if it is that unusable that no real platform can use it, I would >>>>>>>> rather not merge it at all at this stage). >>>>>>> >>>>>>> I agree here. >>>>>>> >>>>>>> I would recommend creating a separate branch for that living outside of the >>>>>>> mainline kernel and merging it when there are real users. >>>>>> >>>>>> Real users will coming soon, we already tested this patch set on real hardware >>>>>> (ARM64 Juno platform), >>>>> >>>>> I don't consider Juno a server platform ;) (but it's good enough for >>>>> development). >>>>> >>>>>> and I think ARM64 server chips and platforms will show up before 3.18 >>>>>> is released. >>>>> >>>>> That's what I've heard/seen. The questions I have are (a) whether >>>>> current ACPI patchset is enough to successfully run Linux on such >>>>> _hardware_ platform (maybe not fully optimised, for example just WFI >>>>> cpuidle) and (b) whether we still want to mandate a DT in the kernel for >>>>> such platforms. >>>> >>>> For (a), this patch set is only for ARM64 core, not including platform >>>> specific device drivers, it will be covered by the binding of _DSD or >>>> explicit definition of PNP ID/ACPI ID(s). >>> >>> So we go back to the discussions we had few months ago in Macau. I'm not >>> concerned about the core ARM and architected peripherals covered by ACPI >>> 5.1 (as long as the current patches get positive technical review). But >>> I'm concerned about the additional bits needed for a real SoC like _DSD >>> definitions, how they get reviewed/accepted (or is it just the vendor's >>> problem?). >> >> As the _DSD patch set sent out by Intel folks, _DSD definitions are just >> DT definitions. To use _DSD or not, I think it depends on OEM use cases, >> we can bring up Juno without _DSD (Graeme is working on that, still need >> some time to clean up the code). >> >>> >>> I think SBSA is too vague to guarantee a kernel image running on a >>> compliant platform without additional (vendor-specific) tweaks. So what >>> I asked for is (1) a document (guide) to define the strict set of ACPI >>> features and bindings needed for a real SoC and (2) proof that the >>> guidelines are enough for real hardware. I think we have (1) under >>> review with some good feedback so far. As for (2), we can probably only >>> discuss Juno openly. I think you could share the additional Juno patches >>> on this list so that reviewers can assess the suitability. If we deem >>> ACPI not (yet) suitable for Juno, is there other platform we could see >>> patches for? >> >> Ok, we will send out all the patches for Juno in next version for review, >> as mentioned above, we still need more time to clean up the code. >> >>> >>>>> Given the answer to (a) and what other features are needed, we may or >>>>> may not mandate (b). We were pretty clear few months ago that (b) is >>>>> still required but at the time we were only openly talking about ACPI >>>>> 5.0 which was lacking many features. I think we need to revisit that >>>>> position based on how usable ACPI 5.1 for ARM (and current kernel >>>>> implementation) is. Would you mind elaborating what an ACPI-only >>>>> platform miss? >>>> >>>> Do you mean something still missing? We still miss some features for >>>> ARM in ACPI, but I think they are not critical, here is the list I can >>>> remember: >>>> - ITS for GICv3/4; >>>> - SMMU support; >>>> - CPU idle control. >>> >>> I agree, these are not critical at this stage. But they only refer to >>> architected peripherals. Is there anything else missing for an SoC? Do >>> we need to define clocks? >> >> No, I prefer not. As we discussed in this thread before, we don't need >> clock definition if we use SBSA compatible UART on Juno. >> >>> >>>> For ACPI 5.1, it fixes many problems for ARM: >>>> - weak definition for GIC, so we introduce visualization, v2m and >>>> part of GICv3/4 (redistributors) support. >>>> - No support for PSCI. Fix it to support PSCI 0.2+; >>>> - Not support for Always-on timer and SBSA-L1 watchdog. >>> >>> These are all good, that's why we shouldn't even talk about ACPI 5.0 in >>> the ARM context. >>> >>>> - How to describe device properties, so _DSD is introduced for >>>> device probe. >>> >>> For the last bullet, is there any review process (at least like what we >>> have for DT bindings)? On top of such process, do we have guidelines and >>> example code on how the Linux support should be implemented. As Olof >>> mentioned, should we see how the DT and ACPI probing paths work >>> together? I really think we should be very clear here and not let >>> vendors invent their own independent methods. >> >> As said above, Intel folks provided some good examples for that, and >> clarified a lot of things: >> >> https://lkml.org/lkml/2014/8/17/10 >> >>> >>>>> I would expect a new server platform designed with ACPI in mind to >>>>> require minimal SoC specific code, so we may only see a few patches >>>>> under drivers/ for such platforms adding ACPI-specific probing (possibly >>>>> new drivers as well if it's a new component). >>>>> >>>>>> For this patch set, DT is the first class citizen at now: >>>>>> >>>>>> a) We can always set CONFIG_ACPI as off in Kconfig, and use DT only; >>>>> >>>>> Not just off but, based on maturity, depend on EXPERT. >>>> >>>> Ok. And don't set ACPI default off (pass acpi=on to enable it)? >>> >>> That's my view, just make it clear ACPI is experimental at the Kconfig >>> level because longer term we won't mandate SoCs to provide both DT and >>> ACPI tables. >> >> I agree with you that if we set ACPI default off, firmware will always >> pass acpi=on if they want to use ACPI, so I think it would be better >> to depend on EXPERT instead. >> >> Olof, is it ok to you too? > > Given that we're going through all these complex schemes to merge code > that isn't ready and keeping it off by default, the answer is really > to continue holding off merging it. > > We already had agreement from earlier this year that we needed to see > several systems in the _market_ that uses ACPI before we have an idea of > how messy they will be in reality. Not eval boards, development systems > or reference designs. None of the current discussion has changed that. I think some SBSA compatible ARM64 server boards would work, such as Seattle board, right? > > There's also the concern that there are still significant portions missing > from 5.1 that won't be there until 5.2 or later. Having experimental > 5.1 support for a few systems (out of tree) is likely going to result in > finding out things that don't work well and should be revised -- if we > don't merge this now then we can avoid having to keep the 5.1 backwards > compatibility forever. Compare this to how we've been regretting some > of the early-defined bindings on DT and wish we didn't have to keep > them around. Please learn from our mistakes. :-) Yes, there are some features missing in ACPI 5.1, and I list them out in previous email replying Catalin, as I said, they are not critical for ARM64 for now. > > On the patches themselves: > > It's great to see the patch sets posted, and they're looking pretty good > -- things are very much heading in the right direction. My main remaining > objection is around how it is integrated with the arch code. I don't > like seeing all the dual code paths that ACPI introduces. It's obvious > that two completely different entities have written the ACPI and the DT > portions of the kernel, and we can't really have that situation for a > brand new architecture like this. > > So, I'd like to see closer integration between the two before code > goes in. More shared code path and driving the differences through data > (or possibly function pointers in places, etc), and fewer completely > separate implementations. I'm working on it, I hope I can achieve that, you know, it needs more efforts to do it :) > > Until then, please keep posting patches for review -- it's useful > to see where it's going. I think it's also useful to get the generic > ACPI integration merged as it has been already (with pieces going in > over time). Sure I will :) Thanks Hanjun From mboxrd@z Thu Jan 1 00:00:00 1970 From: hanjun.guo@linaro.org (Hanjun Guo) Date: Thu, 21 Aug 2014 12:00:40 +0800 Subject: [PATCH 19/19] Documentation: ACPI for ARM64 In-Reply-To: <20140820221702.GA26287@localhost> References: <1406206825-15590-1-git-send-email-hanjun.guo@linaro.org> <20140812182347.GA4100@arm.com> <2152407.NpXOMHAEH6@vostro.rjw.lan> <53EC2B35.5010302@linaro.org> <20140814102723.GB9039@arm.com> <53EDCE56.6020702@linaro.org> <20140815100113.GA18863@arm.com> <53F1C776.4080501@linaro.org> <20140820221702.GA26287@localhost> Message-ID: <53F56EE8.9050009@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 2014-8-21 6:17, Olof Johansson wrote: > On Mon, Aug 18, 2014 at 05:29:26PM +0800, Hanjun Guo wrote: >> On 2014-8-15 18:01, Catalin Marinas wrote: >>> Hanjun, >> >> Hi Catalin, >> >>> >>> On Fri, Aug 15, 2014 at 10:09:42AM +0100, Hanjun Guo wrote: >>>> On 2014-8-14 18:27, Catalin Marinas wrote: >>>>> On Thu, Aug 14, 2014 at 04:21:25AM +0100, Hanjun Guo wrote: >>>>>> On 2014-8-14 7:41, Rafael J. Wysocki wrote: >>>>>>> On Tuesday, August 12, 2014 07:23:47 PM Catalin Marinas wrote: >>>>>>>> If we consider ACPI unusable on ARM but we still want to start merging >>>>>>>> patches, we should rather make the config option depend on BROKEN >>>>>>>> (though if it is that unusable that no real platform can use it, I would >>>>>>>> rather not merge it at all at this stage). >>>>>>> >>>>>>> I agree here. >>>>>>> >>>>>>> I would recommend creating a separate branch for that living outside of the >>>>>>> mainline kernel and merging it when there are real users. >>>>>> >>>>>> Real users will coming soon, we already tested this patch set on real hardware >>>>>> (ARM64 Juno platform), >>>>> >>>>> I don't consider Juno a server platform ;) (but it's good enough for >>>>> development). >>>>> >>>>>> and I think ARM64 server chips and platforms will show up before 3.18 >>>>>> is released. >>>>> >>>>> That's what I've heard/seen. The questions I have are (a) whether >>>>> current ACPI patchset is enough to successfully run Linux on such >>>>> _hardware_ platform (maybe not fully optimised, for example just WFI >>>>> cpuidle) and (b) whether we still want to mandate a DT in the kernel for >>>>> such platforms. >>>> >>>> For (a), this patch set is only for ARM64 core, not including platform >>>> specific device drivers, it will be covered by the binding of _DSD or >>>> explicit definition of PNP ID/ACPI ID(s). >>> >>> So we go back to the discussions we had few months ago in Macau. I'm not >>> concerned about the core ARM and architected peripherals covered by ACPI >>> 5.1 (as long as the current patches get positive technical review). But >>> I'm concerned about the additional bits needed for a real SoC like _DSD >>> definitions, how they get reviewed/accepted (or is it just the vendor's >>> problem?). >> >> As the _DSD patch set sent out by Intel folks, _DSD definitions are just >> DT definitions. To use _DSD or not, I think it depends on OEM use cases, >> we can bring up Juno without _DSD (Graeme is working on that, still need >> some time to clean up the code). >> >>> >>> I think SBSA is too vague to guarantee a kernel image running on a >>> compliant platform without additional (vendor-specific) tweaks. So what >>> I asked for is (1) a document (guide) to define the strict set of ACPI >>> features and bindings needed for a real SoC and (2) proof that the >>> guidelines are enough for real hardware. I think we have (1) under >>> review with some good feedback so far. As for (2), we can probably only >>> discuss Juno openly. I think you could share the additional Juno patches >>> on this list so that reviewers can assess the suitability. If we deem >>> ACPI not (yet) suitable for Juno, is there other platform we could see >>> patches for? >> >> Ok, we will send out all the patches for Juno in next version for review, >> as mentioned above, we still need more time to clean up the code. >> >>> >>>>> Given the answer to (a) and what other features are needed, we may or >>>>> may not mandate (b). We were pretty clear few months ago that (b) is >>>>> still required but at the time we were only openly talking about ACPI >>>>> 5.0 which was lacking many features. I think we need to revisit that >>>>> position based on how usable ACPI 5.1 for ARM (and current kernel >>>>> implementation) is. Would you mind elaborating what an ACPI-only >>>>> platform miss? >>>> >>>> Do you mean something still missing? We still miss some features for >>>> ARM in ACPI, but I think they are not critical, here is the list I can >>>> remember: >>>> - ITS for GICv3/4; >>>> - SMMU support; >>>> - CPU idle control. >>> >>> I agree, these are not critical at this stage. But they only refer to >>> architected peripherals. Is there anything else missing for an SoC? Do >>> we need to define clocks? >> >> No, I prefer not. As we discussed in this thread before, we don't need >> clock definition if we use SBSA compatible UART on Juno. >> >>> >>>> For ACPI 5.1, it fixes many problems for ARM: >>>> - weak definition for GIC, so we introduce visualization, v2m and >>>> part of GICv3/4 (redistributors) support. >>>> - No support for PSCI. Fix it to support PSCI 0.2+; >>>> - Not support for Always-on timer and SBSA-L1 watchdog. >>> >>> These are all good, that's why we shouldn't even talk about ACPI 5.0 in >>> the ARM context. >>> >>>> - How to describe device properties, so _DSD is introduced for >>>> device probe. >>> >>> For the last bullet, is there any review process (at least like what we >>> have for DT bindings)? On top of such process, do we have guidelines and >>> example code on how the Linux support should be implemented. As Olof >>> mentioned, should we see how the DT and ACPI probing paths work >>> together? I really think we should be very clear here and not let >>> vendors invent their own independent methods. >> >> As said above, Intel folks provided some good examples for that, and >> clarified a lot of things: >> >> https://lkml.org/lkml/2014/8/17/10 >> >>> >>>>> I would expect a new server platform designed with ACPI in mind to >>>>> require minimal SoC specific code, so we may only see a few patches >>>>> under drivers/ for such platforms adding ACPI-specific probing (possibly >>>>> new drivers as well if it's a new component). >>>>> >>>>>> For this patch set, DT is the first class citizen at now: >>>>>> >>>>>> a) We can always set CONFIG_ACPI as off in Kconfig, and use DT only; >>>>> >>>>> Not just off but, based on maturity, depend on EXPERT. >>>> >>>> Ok. And don't set ACPI default off (pass acpi=on to enable it)? >>> >>> That's my view, just make it clear ACPI is experimental at the Kconfig >>> level because longer term we won't mandate SoCs to provide both DT and >>> ACPI tables. >> >> I agree with you that if we set ACPI default off, firmware will always >> pass acpi=on if they want to use ACPI, so I think it would be better >> to depend on EXPERT instead. >> >> Olof, is it ok to you too? > > Given that we're going through all these complex schemes to merge code > that isn't ready and keeping it off by default, the answer is really > to continue holding off merging it. > > We already had agreement from earlier this year that we needed to see > several systems in the _market_ that uses ACPI before we have an idea of > how messy they will be in reality. Not eval boards, development systems > or reference designs. None of the current discussion has changed that. I think some SBSA compatible ARM64 server boards would work, such as Seattle board, right? > > There's also the concern that there are still significant portions missing > from 5.1 that won't be there until 5.2 or later. Having experimental > 5.1 support for a few systems (out of tree) is likely going to result in > finding out things that don't work well and should be revised -- if we > don't merge this now then we can avoid having to keep the 5.1 backwards > compatibility forever. Compare this to how we've been regretting some > of the early-defined bindings on DT and wish we didn't have to keep > them around. Please learn from our mistakes. :-) Yes, there are some features missing in ACPI 5.1, and I list them out in previous email replying Catalin, as I said, they are not critical for ARM64 for now. > > On the patches themselves: > > It's great to see the patch sets posted, and they're looking pretty good > -- things are very much heading in the right direction. My main remaining > objection is around how it is integrated with the arch code. I don't > like seeing all the dual code paths that ACPI introduces. It's obvious > that two completely different entities have written the ACPI and the DT > portions of the kernel, and we can't really have that situation for a > brand new architecture like this. > > So, I'd like to see closer integration between the two before code > goes in. More shared code path and driving the differences through data > (or possibly function pointers in places, etc), and fewer completely > separate implementations. I'm working on it, I hope I can achieve that, you know, it needs more efforts to do it :) > > Until then, please keep posting patches for review -- it's useful > to see where it's going. I think it's also useful to get the generic > ACPI integration merged as it has been already (with pieces going in > over time). Sure I will :) Thanks Hanjun