All of lore.kernel.org
 help / color / mirror / Atom feed
From: kever.yang@rock-chips.com (Kever Yang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/11] ARM: dts: rockchip: add operating points and armclk references
Date: Fri, 12 Sep 2014 15:33:55 +0800	[thread overview]
Message-ID: <5412A1E3.1090707@rock-chips.com> (raw)
In-Reply-To: <CAD=FV=U0h2nDQf6JzErhUn+R7384xSTeTjga03MZtOccf7S0bg@mail.gmail.com>

Heiko,

On 09/09/2014 04:16 AM, Doug Anderson wrote:
> Heiko,
>
> On Fri, Sep 5, 2014 at 4:06 PM, Heiko Stuebner <heiko@sntech.de> wrote:
>> Add basic OPP entries for current supported Rockchip SoCs.
>> The operating points are currently very conservative, so individual
>> boards may opt to redefine them.
>>
>> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>> ---
>>   arch/arm/boot/dts/rk3066a.dtsi | 12 +++++++++++-
>>   arch/arm/boot/dts/rk3188.dtsi  | 15 ++++++++++++++-
>>   arch/arm/boot/dts/rk3288.dtsi  | 17 ++++++++++++++++-
>>   3 files changed, 41 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
>> index 879a818..572c30b 100644
>> --- a/arch/arm/boot/dts/rk3066a.dtsi
>> +++ b/arch/arm/boot/dts/rk3066a.dtsi
>> @@ -26,11 +26,21 @@
>>                  #size-cells = <0>;
>>                  enable-method = "rockchip,rk3066-smp";
>>
>> -               cpu at 0 {
>> +               cpu0: cpu at 0 {
>>                          device_type = "cpu";
>>                          compatible = "arm,cortex-a9";
>>                          next-level-cache = <&L2>;
>>                          reg = <0x0>;
>> +                       operating-points = <
>> +                               /* kHz    uV */
>> +                               1008000 1075000
>> +                                816000 1025000
>> +                                600000 1025000
>> +                                504000 1000000
>> +                                312000  975000
>> +                       >;
>> +                       clock-latency = <40000>;
>> +                       clocks = <&cru ARMCLK>;
>>                  };
>>                  cpu at 1 {
>>                          device_type = "cpu";
>> diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
>> index ee801a9..e237216 100644
>> --- a/arch/arm/boot/dts/rk3188.dtsi
>> +++ b/arch/arm/boot/dts/rk3188.dtsi
>> @@ -26,11 +26,24 @@
>>                  #size-cells = <0>;
>>                  enable-method = "rockchip,rk3066-smp";
>>
>> -               cpu at 0 {
>> +               cpu0: cpu at 0 {
>>                          device_type = "cpu";
>>                          compatible = "arm,cortex-a9";
>>                          next-level-cache = <&L2>;
>>                          reg = <0x0>;
>> +                       operating-points = <
>> +                               /* kHz    uV */
>> +                               1608000 1350000
>> +                               1416000 1250000
>> +                               1200000 1150000
>> +                               1008000 1075000
>> +                                816000  975000
>> +                                600000  950000
>> +                                504000  925000
>> +                                312000  875000
>> +                       >;
>> +                       clock-latency = <40000>;
>> +                       clocks = <&cru ARMCLK>;
>>                  };
>>                  cpu at 1 {
>>                          device_type = "cpu";
>> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
>> index 5950b0a..9275a47 100644
>> --- a/arch/arm/boot/dts/rk3288.dtsi
>> +++ b/arch/arm/boot/dts/rk3288.dtsi
>> @@ -40,10 +40,25 @@
>>                  #address-cells = <1>;
>>                  #size-cells = <0>;
>>
>> -               cpu at 500 {
>> +               cpu0: cpu at 500 {
>>                          device_type = "cpu";
>>                          compatible = "arm,cortex-a12";
>>                          reg = <0x500>;
>> +                       operating-points = <
>> +                               /* KHz    uV */
>> +                               1416000 1150000
>> +                               1200000 1050000
>> +                               1008000 1000000
>> +                               816000  950000
>> +                               696000  900000
>> +                               600000  850000
>> +                               408000  850000
>> +                               312000  850000
>> +                               216000  850000
>> +                               126000  850000
>> +                       >;
> This doesn't quite match the ordering that Kever put up most recently
> at <https://chromium-review.googlesource.com/#/c/211862/2/arch/arm/boot/dts/rk3288.dtsi>.
> Specifically, he has:
>
> 1800000 1300000
> 1608000 1200000
> 1416000 1150000
> 1200000 1100000
> 1008000 1050000
> [ 816000 1000000
> 600000 900000
> 408000 850000
> 216000 850000
> 126000 850000
Here is the general OPP table for rk3288 we recommend to use in upstream:

    operating-points = <
                 /* KHz    uV */
                 1608000 1350000
                 1512000 1300000
                 1416000 1200000
                 1200000 1100000
                 1008000 1050000
                 816000 1000000
                 696000 950000
                 600000 900000
                 408000 900000
                 312000 900000
                 216000 900000
                 126000 900000
                 >;

After this,
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

Note that the CPU can't not stay on top frequency for a long time, the cpu
might overheat, the cpufreq is better to work with cpu thermal for rk3288.

-Kever

  parent reply	other threads:[~2014-09-12  7:33 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-05 23:06 [PATCH 00/11] clk: rockchip: add a cpu clock-type Heiko Stuebner
2014-09-05 23:06 ` [PATCH 01/11] clk: rockchip: fix rk3066 pll status register location Heiko Stuebner
2014-09-05 23:06 ` [PATCH 02/11] clk: rockchip: fix rk3288 " Heiko Stuebner
2014-09-08 20:48   ` Doug Anderson
2014-09-05 23:06 ` [PATCH 03/11] clk: rockchip: reparent aclk_cpu_pre to the gpll Heiko Stuebner
2014-09-05 23:06 ` [PATCH 04/11] clk: rockchip: make tightly bound armclk child-clocks read-only Heiko Stuebner
2014-09-05 23:06 ` [PATCH 05/11] clk: rockchip: add new clock-type for the cpuclk Heiko Stuebner
2014-09-05 23:06 ` [PATCH 06/11] clk: rockchip: add binding id for ARMCLK Heiko Stuebner
2014-09-05 23:06 ` [PATCH 07/11] clk: rockchip: switch to using the new cpuclk type for armclk Heiko Stuebner
2014-09-05 23:06 ` [PATCH 08/11] ARM: dts: rockchip: add operating points and armclk references Heiko Stuebner
2014-09-08 20:16   ` Doug Anderson
2014-09-08 23:45     ` Naoki FUKAUMI
2014-09-12  7:33     ` Kever Yang [this message]
2014-09-12 11:37       ` Naoki FUKAUMI
2014-09-16  1:44         ` Kever Yang
2014-09-16  5:23           ` Naoki FUKAUMI
2014-09-05 23:06 ` [PATCH 09/11] ARM: dts: rockchip: add cpu supplies to boards Heiko Stuebner
2014-09-05 23:06 ` [PATCH 10/11] ARM: rockchip: enable cpufreq-related options Heiko Stuebner
2014-09-08 17:52   ` Doug Anderson
2014-09-05 23:06 ` [PATCH 11/11] ARM: rockchip: add a cpufreq-cpu0 device Heiko Stuebner
2014-09-09 20:22 ` [PATCH 00/11] clk: rockchip: add a cpu clock-type Mike Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5412A1E3.1090707@rock-chips.com \
    --to=kever.yang@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --subject='Re: [PATCH 08/11] ARM: dts: rockchip: add operating points and armclk references' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.