All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeroen Groenewegen van der Weyden <groen692@grosc.com>
To: Jan Beulich <JBeulich@suse.com>,
	Eddie Dong <eddie.dong@intel.com>,
	Jun Nakajima <jun.nakajima@intel.com>,
	Kevin Tian <kevin.tian@intel.com>
Cc: xen-devel@lists.xen.org
Subject: Re: Crash of guest with nested vmx with Unknown nested vmexit reason 80000021.
Date: Tue, 07 Oct 2014 17:16:56 +0200	[thread overview]
Message-ID: <543403E8.6040507@grosc.com> (raw)
In-Reply-To: <5433B94E020000780003CBF0@mail.emea.novell.com>

Hi Jan,

I installed xen-4.5.29823-1.xen_unstable.1.x86_64
from the 
http://download.opensuse.org/repositories/home:/olh:/xen-unstable/openSUSE_Factory/ 


After about 45 minutes the guests crashed again.

mfg,
Jeroen


(XEN) vvmx.c:2476:d1v0 Unknown nested vmexit reason 80000021.
(XEN) Failed vm entry (exit reason 0x80000021) caused by invalid guest 
state (0).
(XEN) ************* VMCS Area **************
(XEN) *** Guest State ***
(XEN) CR0: actual=0x0000000000000033, shadow=0x0000000000000011, 
gh_mask=ffffffffffffffff
(XEN) CR4: actual=0x0000000000002050, shadow=0x0000000000000000, 
gh_mask=ffffffffffffffff
(XEN) CR3: actual=0x00000000feffc000, target_count=0
(XEN)      target0=0000000000000000, target1=0000000000000000
(XEN)      target2=0000000000000000, target3=0000000000000000
(XEN) RSP = 0x00000000000006be (0x00000000000006be)  RIP = 
0x000000000000017d (0x000000000000017d)
(XEN) RFLAGS=0x0000000000000002 (0x0000000000000002)  DR7 = 
0x0000000000000400
(XEN) Sysenter RSP=0000000000000000 CS:RIP=0000:0000000000000000
(XEN) CS: sel=0xbf70, attr=0x0009b, limit=0x0000075a, 
base=0x000000000194fec0
(XEN) DS: sel=0x3cec, attr=0x00093, limit=0x00000110, 
base=0x000000000bcbe276
(XEN) SS: sel=0x3cf4, attr=0x00093, limit=0x000007ff, 
base=0x000000000bcbe3aa
(XEN) ES: sel=0x3cfc, attr=0x00093, limit=0x00000099, 
base=0x000000000bcbebac
(XEN) FS: sel=0x0000, attr=0x1c000, limit=0xffffffff, 
base=0x0000000000000000
(XEN) GS: sel=0x0000, attr=0x1c000, limit=0xffffffff, 
base=0x0000000000000000
(XEN) GDTR:                           limit=0x0000ffff, 
base=0x0000000001000000
(XEN) LDTR: sel=0x0820, attr=0x00082, limit=0x0000ffff, 
base=0x0000000001010400
(XEN) IDTR:                           limit=0x000003ff, 
base=0x0000000001010000
(XEN) TR: sel=0x0690, attr=0x00083, limit=0x0000002b, 
base=0x0000000001213a30
(XEN) Guest PAT = 0x0000050100070406
(XEN) TSC Offset = fffffe8a52350fd4
(XEN) DebugCtl=0000000000000000 DebugExceptions=0000000000000000
(XEN) Interruptibility=0008 ActivityState=0000
(XEN) *** Host State ***
(XEN) RSP = 0xffff830836b5ff90  RIP = 0xffff82d0801e3ed0
(XEN) CS=e008 DS=0000 ES=0000 FS=0000 GS=0000 SS=0000 TR=e040
(XEN) FSBase=0000000000000000 GSBase=0000000000000000 
TRBase=ffff830836b64c80
(XEN) GDTBase=ffff830836b55000 IDTBase=ffff830836b61000
(XEN) CR0=0000000080050033 CR3=000000082ffdd000 CR4=00000000000026f0
(XEN) Sysenter RSP=ffff830836b5ffc0 CS:RIP=e008:ffff82d0802220a0
(XEN) Host PAT = 0x0000050100070406
(XEN) *** Control State ***
(XEN) PinBased=0000003f CPUBased=b6b9e5fa SecondaryExec=000004eb
(XEN) EntryControls=000011ff ExitControls=000fefff
(XEN) ExceptionBitmap=00040042
(XEN) VMEntry: intr_info=80000202 errcode=00000000 ilen=00000003
(XEN) VMExit: intr_info=00000000 errcode=00000000 ilen=00000003
(XEN)         reason=80000021 qualification=00000000
(XEN) IDTVectoring: info=80000202 errcode=00000000
(XEN) TPR Threshold = 0x00
(XEN) EPT pointer = 0x000000082ffff01e
(XEN) Virtual processor ID = 0xe6a3
(XEN) **************************************
(XEN) domain_crash called from vmx.c:2483
(XEN) Domain 1 (vcpu#0) crashed on cpu#9:
(XEN) ----[ Xen-4.5.29823-1.xen_unstable.1  x86_64  debug=n  Not tainted 
]----
(XEN) CPU:    9
(XEN) RIP:    bf70:[<000000000000017d>]
(XEN) RFLAGS: 0000000000000002   CONTEXT: hvm guest
(XEN) rax: 0000000000040002   rbx: 0000000000042701   rcx: 00000000bf480003
(XEN) rdx: 00000000248816a0   rsi: 0000000000000000   rdi: 0000000026b00096
(XEN) rbp: 00000000000006d4   rsp: 00000000000006be   r8: 0000000000000000
(XEN) r9:  0000000000000000   r10: 0000000000000000   r11: 0000000000000000
(XEN) r12: 0000000000000000   r13: 0000000000000000   r14: 0000000000000000
(XEN) r15: 0000000000000000   cr0: 0000000000000033   cr4: 0000000000002010
(XEN) cr3: 00000000feffc000   cr2: 0000000000000000
(XEN) ds: 3cec   es: 3cfc   fs: 0000   gs: 0000   ss: 3cf4   cs: bf70

Jan Beulich schreef op 7-10-2014 om 09:58:
>>>> On 30.09.14 at 17:55, <groen692@grosc.com> wrote:
>> Recently I updated my openSuse box from 12.3 to 13.1. On this box I run
>> xen with several guests. One of these guests is an appliance that has 4
>> kvm guests running.
>> When I start this appliance with the nested vmx feature the appliance
>> crashes either immediately or after a few minutes.
>>
>> This same guest was running without a problem on opensuse releases 11.4
>> until 12.3
>> [...]
>> ==== outup xl demsg
>> (XEN) vvmx.c:2459:d5 Unknown nested vmexit reason 80000021.
>> (XEN) Failed vm entry (exit reason 0x80000021) caused by invalid guest
>> state (0).
>> (XEN) ************* VMCS Area **************
>> [...]
> So the problem here is that
>
>> (XEN) Interruptibility=0008 ActivityState=0000
> VMX_INTR_SHADOW_NMI is set while
>
>> (XEN) PinBased=0000003f CPUBased=b6b9e5fa SecondaryExec=000004eb
> PIN_BASED_VIRTUAL_NMIS is active and
>
>> (XEN) VMEntry: intr_info=80000202 errcode=5d021101 ilen=00000003
>> (XEN) VMExit: intr_info=00000000 errcode=00000000 ilen=00000003
>> (XEN)         reason=80000021 qualification=00000000
>> (XEN) IDTVectoring: info=80000202 errcode=00000000
> an NMI is being injected. This case is explicitly mentioned in Vol 3
> section 31.7.1.2 (Resuming Guest Software after Handling an
> Exception). Either there needs to be extra code in vvmx.c to clear
> VMX_INTR_SHADOW_NMI (as the second sub-bullet point of the last
> bullet point says), or the second half of vmx_idtv_reinject() needs
> to be done without regard to nestedhvm_vcpu_in_guestmode(v)
> (and maybe also without regard to EXIT_REASON_TASK_SWITCH).
>
> Speaking of SDM sections: There are quite a few references in the
> code that name just section numbers (in the case here, several
> references to sections 25.7.1.* exist). These numbers become stale
> quite quickly (here they're now 31.7.1.*), so in order to help
> digging through issues like the one here, can I please ask one of
> you to go through and replace (or at least amend) these numbers
> with the sections' titles (which I hope won't get altered that quickly)?
>
> Jan
>
>

  reply	other threads:[~2014-10-07 15:16 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-30 15:55 Crash of guest with nested vmx with Unknown nested vmexit reason 80000021 Jeroen Groenewegen van der Weyden
2014-10-01 13:20 ` Jan Beulich
2014-10-07  7:58 ` Jan Beulich
2014-10-07 15:16   ` Jeroen Groenewegen van der Weyden [this message]
2014-10-07 19:56   ` Tian, Kevin
2014-10-10 10:31     ` Jeroen Groenewegen van der Weyden
2014-10-16  6:18       ` Zhang, Yang Z
2014-10-16  6:41         ` Jan Beulich
2014-10-29 14:17           ` Jeroen Groenewegen van der Weyden
2014-10-29 16:42             ` Jan Beulich
2014-11-03 11:16               ` George Dunlap
2014-12-09  9:09                 ` Jeroen Groenewegen van der Weyden
2014-12-09  9:17                   ` Jan Beulich
2015-02-26 18:56                     ` Jeroen Groenewegen van der Weyden
2015-02-27  8:08                       ` Jan Beulich
2015-03-04 10:24                         ` Jeroen Groenewegen van der Weyden
2015-04-07  7:18                           ` Li, Liang Z
2014-10-16  6:27       ` Zhang, Yang Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=543403E8.6040507@grosc.com \
    --to=groen692@grosc.com \
    --cc=JBeulich@suse.com \
    --cc=eddie.dong@intel.com \
    --cc=jun.nakajima@intel.com \
    --cc=kevin.tian@intel.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.