From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Thu, 22 Jan 2015 18:49:43 -0600 Subject: [U-Boot] Please pull u-boot-mpc85xx master Message-ID: <54C19AA7.30206@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The following changes since commit ab77f24119e80257de4ab017b877f92f96980562: Merge branch 'master' of git://git.denx.de/u-boot-ti (2015-01-16 10:25:01 -0500) are available in the git repository at: git://git.denx.de/u-boot-mpc85xx.git master for you to fetch changes up to db4a1767c09a4696792204d1cac33631cb38424e: board/T1040rdb: Add VSC9953 support for T1040rdb board (2015-01-21 09:23:36 -0600) ---------------------------------------------------------------- Aneesh Bansal (1): powerpc/mpc85xx: Define PBI Flash Base for C29XPCIE Secure Boot Chunhe Lan (1): powerpc/t4240rdb: Add alternate SerDes 2 protocol to align with RCW Codrin Ciubotariu (11): net/fm: Fix error when FMAN MAC has no PHY arch/powerpc: Fix mapping of Freescale SerDes protocols arch/powerpc: Add SGMII support for the L2 Switch ports net/fm: Enable FMAN ports if l2switch ports are connected over SGMII net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP arch/powerpc: Initialize VSC9953 L2 Switch board/T1040qds: Fix lane-to-slot mapping for SerDes protocol 0x89 board/T1040qds: T1040 FMAN ports FM1 at DTSEC1 and FM1 at DTSEC2 have no PHYs board/T104xrdb: T1040 FMAN ports FM1 at DTSEC1 and FM1 at DTSEC2 have no PHYs board/T1040qds: Add VSC9953 support for T1040qds board board/T1040rdb: Add VSC9953 support for T1040rdb board Po Liu (1): powerpc/c29xpcie: Add secure boot support Ruchika Gupta (1): powerpc: mpc85xx: Add dummy gpio.h to enable CONFIG_OF_CONTROL Shaohui Xie (1): phylib: add support for aquantia PHYs Shengzhou Liu (3): powerpc/t1024: add serdes protocol 0x40 and 0x5f t1024qds: add missing T1024QDS_defconfig powerpc/t1024rdb: Add support for T1024RDB-PB Tudor Laurentiu (1): b4860: Correct LIODN assignment for PCIe gaurav rana (2): powerpc/mpc85xx: SECURE BOOT- Add secure boot target for P5040DS powerpc: SECURE BOOT- Add secure boot target for T1042RDB harninder rai (1): powerpc/913x: Add config flag for bootdelay tang yuantian (4): mpc85xx/t102xrdb: convert deep sleep to generic board interface mpc85xx/t102xqds: convert deep sleep to generic board interface mpc85xx/t1040qds: convert deep sleep to generic board interface mpc85xx: clean up the old deep sleep framework arch/powerpc/cpu/mpc85xx/b4860_ids.c | 2 +- arch/powerpc/cpu/mpc85xx/cpu_init.c | 10 +- arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 73 ++-- arch/powerpc/cpu/mpc85xx/t1024_serdes.c | 2 + arch/powerpc/cpu/mpc85xx/t1040_serdes.c | 8 +- arch/powerpc/cpu/mpc8xxx/cpu.c | 5 + arch/powerpc/include/asm/arch-mpc85xx/gpio.h | 15 + arch/powerpc/include/asm/fsl_secure_boot.h | 2 + arch/powerpc/include/asm/fsl_serdes.h | 7 + arch/powerpc/lib/board.c | 21 - board/freescale/c29xpcie/MAINTAINERS | 2 + board/freescale/corenet_ds/MAINTAINERS | 1 + board/freescale/t102xqds/ddr.c | 19 + board/freescale/t102xqds/t102xqds.c | 23 +- board/freescale/t102xrdb/cpld.h | 4 + board/freescale/t102xrdb/ddr.c | 19 + board/freescale/t102xrdb/eth_t102xrdb.c | 30 +- board/freescale/t102xrdb/spl.c | 7 + board/freescale/t102xrdb/t102xrdb.c | 54 ++- board/freescale/t1040qds/ddr.c | 19 + board/freescale/t1040qds/eth.c | 93 +++++ board/freescale/t1040qds/t1040qds.c | 23 +- board/freescale/t104xrdb/MAINTAINERS | 1 + board/freescale/t104xrdb/eth.c | 59 ++- board/freescale/t4rdb/eth.c | 2 +- board/freescale/t4rdb/t4_rcw.cfg | 4 +- configs/C29XPCIE_NOR_SECBOOT_defconfig | 4 + configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig | 4 + configs/P5040DS_SECURE_BOOT_defconfig | 4 + configs/T1024QDS_defconfig | 4 + configs/T1042RDB_SECURE_BOOT_defconfig | 4 + doc/README.t1040-l2switch | 48 +++ drivers/net/Makefile | 1 + drivers/net/fm/eth.c | 30 +- drivers/net/fm/t1040.c | 3 +- drivers/net/phy/Makefile | 1 + drivers/net/phy/aquantia.c | 156 ++++++++ drivers/net/phy/phy.c | 3 + drivers/net/vsc9953.c | 497 ++++++++++++++++++++++++ include/configs/BSC9131RDB.h | 1 + include/configs/BSC9132QDS.h | 1 + include/configs/C29XPCIE.h | 2 + include/configs/T102xQDS.h | 3 + include/configs/T102xRDB.h | 23 +- include/configs/T1040QDS.h | 9 + include/configs/T104xRDB.h | 8 + include/phy.h | 1 + include/vsc9953.h | 402 +++++++++++++++++++ 48 files changed, 1582 insertions(+), 132 deletions(-) create mode 100644 arch/powerpc/include/asm/arch-mpc85xx/gpio.h create mode 100644 configs/C29XPCIE_NOR_SECBOOT_defconfig create mode 100644 configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig create mode 100644 configs/P5040DS_SECURE_BOOT_defconfig create mode 100644 configs/T1024QDS_defconfig create mode 100644 configs/T1042RDB_SECURE_BOOT_defconfig create mode 100644 doc/README.t1040-l2switch create mode 100644 drivers/net/phy/aquantia.c create mode 100644 drivers/net/vsc9953.c create mode 100644 include/vsc9953.h Thanks. York