All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Sébastien Bourdeauducq" <sb@m-labs.hk>
To: linux-wireless@vger.kernel.org
Subject: "brcmfmac: brcmf_sdio_htclk: HT Avail timeout" on Thinkpad Tablet 10
Date: Wed, 28 Jan 2015 15:15:09 +0800	[thread overview]
Message-ID: <54C88C7D.707@m-labs.hk> (raw)

[-- Attachment #1: Type: text/plain, Size: 662 bytes --]

Hi,

The Lenovo Thinkpad Tablet 10 is a complete disaster under Linux, and
among many problems the SDIO brcmfmac wifi does not work.

I get the following messages in the kernel log:
brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done
for chip 4324 rev 6 pmurev 17
brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[repeated]

and the network interface is never created.

I'm running kernel 3.18.4, my brcmfmac43241b4-sdio.bin is identical to
the one in the linux-firmware repository, and I have attached the
brcmfmac43241b4-sdio.txt that I have extracted from the EFI variables.

Any help would be appreciated.

Sébastien

[-- Attachment #2: brcmfmac43241b4-sdio.txt --]
[-- Type: text/plain, Size: 2550 bytes --]

#---------------------------------------------------------------------------------------------------------------------
# NVRAM file for BCM4324 with 2.4G and 5G external PAs..
# Release Version: fox77h506nvram-Ella-WorldWide-v02
#---------------------------------------------------------------------------------------------------------------------
devid=0x4374
boardtype=0x67e
boardrev=0x1301
boardflags=0x90001200
boardflags2=0
macaddr=00:90:4c:c5:12:38
sromrev=9
xtalfreq=37400
nocrc=1
ag0=0x2
ag1=0x2
ag2=0xff
ag3=0xff
txchain=0x3
rxchain=0x3
aa2g=3
aa5g=3
ccode=XT
regrev=31
ledbh0=0xff
ledbh1=0xff
ledbh2=0xff
ledbh3=0xff
leddc=0xffff
#MP Original board PA parameters:
pa2gw0a0=0xffa7
pa2gw1a0=0x1563
pa2gw2a0=0xfeb9
#MP Original board PA parameters:
pa2gw0a1=0xff9c
pa2gw1a1=0x135e
pa2gw2a1=0xfebf
maxp2ga0=80
maxp2ga1=80
maxp5ga0=76
maxp5ga1=76
maxp5gha0=76
maxp5gha1=76
maxp5gla0=76
maxp5gla1=76
pa0itssit=62
pa1itssit=62
antswctl2g=30
antswctl5g=30
antswitch=0x0
subband5gver=0
pa5gw0a0=0xffa1
pa5gw1a0=0x114d
pa5gw2a0=0xfebf
pa5gw0a1=0xffca
pa5gw1a1=0x11aa
pa5gw2a1=0xfeee
pa5glw0a0=0xffb3
pa5glw1a0=0x1080
pa5glw2a0=0xfed4
pa5glw0a1=0xffd4
pa5glw1a1=0x10aa
pa5glw2a1=0xff01
pa5ghw0a0=0xffaf
pa5ghw1a0=0x116f
pa5ghw2a0=0xfee6
pa5ghw0a1=0xff9c
pa5ghw1a1=0x10f3
pa5ghw2a1=0xfed4
extpagain2g=3
extpagain5g=3
pdetrange2g=2
pdetrange5g=2
triso2g=3
triso5g=1
elna2g=1
elnabypass2g=-8
elna5g=1
elnabypass5g=-8
tssipos2g=1
tssipos5g=1
cckbw202gpo=0x6666
cckbw20ul2gpo=0x6666
legofdmbw202gpo=0x55533333
legofdmbw20ul2gpo=0x55533333
mcsbw202gpo=0x66655555
mcsbw20ul2gpo=0x66655555
mcsbw402gpo=0x66655555
mcs32po=0x5555
leg40dup2gpo=0x2
legofdmbw205glpo=0x22200000
legofdmbw20ul5glpo=0x44442222
legofdmbw205gmpo=0x22200000
legofdmbw20ul5gmpo=0x44442222
legofdmbw205ghpo=0x22200000
legofdmbw20ul5ghpo=0x44442222
mcsbw205glpo=0x99999999
mcsbw20ul5glpo=0x99999999
mcsbw405glpo=0x44422222
mcsbw205gmpo=0x66666666
mcsbw20ul5gmpo=0x66666666
mcsbw405gmpo=0x44422222
mcsbw205ghpo=0x66666666
mcsbw20ul5ghpo=0x66666666
mcsbw405ghpo=0x44422222
itt2ga0=0x20
itt5ga0=0x3e
itt2ga1=0x20
itt5ga1=0x3e
tempthresh=120
otpimagesize=232
usbepnum=0x2
muxenab=0x5
noisecaloffset=12
noisecaloffset5g=12
PwrOffsetcck=0x0006
PwrOffset40mhz5g=0x9
txidxcap2g=0
txidxcap5g=0
TssiAv5g=0x0
TssiVmid5g=0x9C
TssiAv2g=0x0
TssiVmid2g=0xAA
#Out-of-band GPIO Wakeup
sd_gpout=0
sd_gpval=1
sd_gpdc=0
#WiFi/BT co-existence parameter
btc_mode=5
btc_params9=15000

             reply	other threads:[~2015-01-29  2:06 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-28  7:15 Sébastien Bourdeauducq [this message]
2015-01-29 19:45 ` "brcmfmac: brcmf_sdio_htclk: HT Avail timeout" on Thinkpad Tablet 10 Arend van Spriel
2015-01-30  3:23   ` Sebastien Bourdeauducq
2015-01-30 14:40 ` Arend van Spriel
2015-01-30 16:28   ` Sebastien Bourdeauducq
2015-09-09 16:55   ` Oleg Kostyuchenko
2015-02-20  8:49 ` "brcmfmac: brcmf_sdio_htclk: HT Avail timeout" on Thinkpad Tablet 10 Jocky Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54C88C7D.707@m-labs.hk \
    --to=sb@m-labs.hk \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.