From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 10 Feb 2015 12:54:44 +0100 Subject: [U-Boot] [PATCH 06/12] pmic:pfuze add macro for setting voltage In-Reply-To: <1420793987-7621-7-git-send-email-Peng.Fan@freescale.com> References: <1420793987-7621-1-git-send-email-Peng.Fan@freescale.com> <1420793987-7621-7-git-send-email-Peng.Fan@freescale.com> Message-ID: <54D9F184.2050508@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 09/01/2015 09:59, Peng Fan wrote: > "#define PFUZE100_SW1ABC_SETP(x) ((x - 3000) / 250)" > This macro is for configuring SW1A/B/C Output Voltage easily. > > Signed-off-by: Peng Fan > --- > include/power/pfuze100_pmic.h | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h > index 7474afb..d304658 100644 > --- a/include/power/pfuze100_pmic.h > +++ b/include/power/pfuze100_pmic.h > @@ -61,6 +61,8 @@ enum { > * Buck Regulators > */ > > +#define PFUZE100_SW1ABC_SETP(x) ((x - 3000) / 250) > + > /* SW1A/B/C Output Voltage Configuration */ > #define SW1x_0_300V 0 > #define SW1x_0_325V 1 > To inform you: patches 1-3 must be rebased and reworked, mainly due to pmic_mode_init() (you have postpone V2 after discussion about ldo-bypass). I start applying the 5-6, that contain only new defines. Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================