From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gregory CLEMENT Subject: Re: [PATCHv3] mvebu: add Linksys WRT1900AC (Mamba) support Date: Mon, 23 Feb 2015 19:32:53 +0100 Message-ID: <54EB7255.7090806@free-electrons.com> References: <1424089864-15651-1-git-send-email-kaloz@openwrt.org> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1424089864-15651-1-git-send-email-kaloz-p3rKhJxN3npAfugRpC6u6w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Imre Kaloz Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org, andrew-g2DYL2Zd6BY@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Imre, On 16/02/2015 13:31, Imre Kaloz wrote: > The Linksys WRT1900AC (Mamba) is a router that has > > - 2 mini-PCIe slots with Marvell 88W8864 radios > - 1 USB 3.0 port > - 1 USB 2.0/eSATAp port > - 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) > - 128MB NAND flash > - 256MB RAM > > Signed-off-by: Imre Kaloz > --- > Changes since v2: > * added tlc59116 leds > * added an extra partition for the unused space > * added serial console pinout > * renamed the dts to armada-xp-linksys-mamba.dts > > Changes since v1: > * add dual license > * lower SPI speed to meet the chip's maximum > * pinctrl cleanups based on Andrew Lunn's suggestions > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 348 ++++++++++++++++++++++++++ > 2 files changed, 349 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-xp-linksys-mamba.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 91bd5bd..a84063f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -541,6 +541,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ > armada-xp-db.dtb \ > armada-xp-gp.dtb \ > armada-xp-lenovo-ix4-300d.dtb \ > + armada-xp-linksys-mamba.dtb \ > armada-xp-matrix.dtb \ > armada-xp-netgear-rn2120.dtb \ > armada-xp-openblocks-ax3-4.dtb \ > diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts > new file mode 100644 > index 0000000..0a3d1d6 > --- /dev/null > +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts > @@ -0,0 +1,348 @@ > +/* > + * Device Tree file for the Linksys WRT1900AC (Mamba). > + * > + * Note: this board is shipped with a new generation boot loader that > + * remaps internal registers at 0xf1000000. Therefore, if earlyprintk > + * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be This symbol name has been removed and DEBUG_MVEBU_UART0_ALTERNATE would be used instead. Besides this, Acked-by: Gregory CLEMENT You don't have to resend a new version for this, I can amend your patch while applying it. So unless there is new comments I will add your patch to the mvebu tree in a couple of days. Thanks, Gregory > + * used. > + * > + * Copyright (C) 2014 Imre Kaloz > + * > + * Based on armada-xp-axpwifiap.dts: > + * > + * Copyright (C) 2013 Marvell > + * > + * Thomas Petazzoni > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without > + * any warranty of any kind, whether express or implied. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include > +#include > +#include "armada-xp-mv78230.dtsi" > + > +/ { > + model = "Linksys WRT1900AC"; > + compatible = "linksys,mamba", "marvell,armadaxp-mv78230", > + "marvell,armadaxp", "marvell,armada-370-xp"; > + > + chosen { > + bootargs = "console=ttyS0,115200"; > + stdout-path = &uart0; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ > + }; > + > + soc { > + ranges = + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; > + > + pcie-controller { > + status = "okay"; > + > + /* Etron EJ168 USB 3.0 controller */ > + pcie@1,0 { > + /* Port 0, Lane 0 */ > + status = "okay"; > + }; > + > + /* First mini-PCIe port */ > + pcie@2,0 { > + /* Port 0, Lane 1 */ > + status = "okay"; > + }; > + > + /* Second mini-PCIe port */ > + pcie@3,0 { > + /* Port 0, Lane 3 */ > + status = "okay"; > + }; > + }; > + > + internal-regs { > + > + /* J10: VCC, NC, RX, NC, TX, GND */ > + serial@12000 { > + status = "okay"; > + }; > + > + sata@a0000 { > + nr-ports = <1>; > + status = "okay"; > + }; > + > + ethernet@70000 { > + pinctrl-0 = <&ge0_rgmii_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + phy-mode = "rgmii-id"; > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + > + ethernet@74000 { > + pinctrl-0 = <&ge1_rgmii_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + phy-mode = "rgmii-id"; > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + > + /* USB part of the eSATA/USB 2.0 port */ > + usb@50000 { > + status = "okay"; > + }; > + > + i2c@11000 { > + status = "okay"; > + clock-frequency = <100000>; > + > + tmp421@4c { > + compatible = "ti,tmp421"; > + reg = <0x4c>; > + }; > + > + tlc59116@68 { > + #address-cells = <1>; > + #size-cells = <0>; > + #gpio-cells = <2>; > + compatible = "ti,tlc59116"; > + reg = <0x68>; > + > + wan_amber@0 { > + label = "mamba:amber:wan"; > + reg = <0x0>; > + }; > + > + wan_white@1 { > + label = "mamba:white:wan"; > + reg = <0x1>; > + }; > + > + wlan_2g@2 { > + label = "mamba:white:wlan_2g"; > + reg = <0x2>; > + }; > + > + wlan_5g@3 { > + label = "mamba:white:wlan_5g"; > + reg = <0x3>; > + }; > + > + esata@4 { > + label = "mamba:white:esata"; > + reg = <0x4>; > + }; > + > + usb2@5 { > + label = "mamba:white:usb2"; > + reg = <0x5>; > + }; > + > + usb3_1@6 { > + label = "mamba:white:usb3_1"; > + reg = <0x6>; > + }; > + > + usb3_2@7 { > + label = "mamba:white:usb3_2"; > + reg = <0x7>; > + }; > + > + wps_white@8 { > + label = "mamba:white:wps"; > + reg = <0x8>; > + }; > + > + wps_amber@9 { > + label = "mamba:amber:wps"; > + reg = <0x9>; > + }; > + }; > + }; > + > + nand@d0000 { > + status = "okay"; > + num-cs = <1>; > + marvell,nand-keep-config; > + marvell,nand-enable-arbiter; > + nand-on-flash-bbt; > + nand-ecc-strength = <4>; > + nand-ecc-step-size = <512>; > + > + partition@0 { > + label = "u-boot"; > + reg = <0x0000000 0x100000>; /* 1MB */ > + read-only; > + }; > + > + partition@100000 { > + label = "u_env"; > + reg = <0x100000 0x40000>; /* 256KB */ > + }; > + > + partition@140000 { > + label = "s_env"; > + reg = <0x140000 0x40000>; /* 256KB */ > + }; > + > + partition@900000 { > + label = "devinfo"; > + reg = <0x900000 0x100000>; /* 1MB */ > + read-only; > + }; > + > + /* kernel1 overlaps with rootfs1 by design */ > + partition@a00000 { > + label = "kernel1"; > + reg = <0xa00000 0x2800000>; /* 40MB */ > + }; > + > + partition@d00000 { > + label = "rootfs1"; > + reg = <0xd00000 0x2500000>; /* 37MB */ > + }; > + > + /* kernel2 overlaps with rootfs2 by design */ > + partition@3200000 { > + label = "kernel2"; > + reg = <0x3200000 0x2800000>; /* 40MB */ > + }; > + > + partition@3500000 { > + label = "rootfs2"; > + reg = <0x3500000 0x2500000>; /* 37MB */ > + }; > + > + /* > + * 38MB, last MB is for the BBT, not writable */ > + */ > + partition@5a00000 { > + label = "syscfg"; > + reg = <0x5a00000 0x2600000>; > + }; > + > + /* > + * Unused area between "s_env" and "devinfo". > + * Moved here because otherwise the renumbered > + * partitions would break the bootloader > + * supplied bootargs > + */ > + partition@180000 { > + label = "unused_area"; > + reg = <0x180000 0x780000>; /* 7.5MB */ > + }; > + }; > + > + spi0: spi@10600 { > + status = "okay"; > + > + spi-flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "everspin,mr25h256"; > + reg = <0>; /* Chip select 0 */ > + spi-max-frequency = <40000000>; > + }; > + }; > + }; > + }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-0 = <&keys_pin>; > + pinctrl-names = "default"; > + > + button@1 { > + label = "WPS"; > + linux,code = ; > + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; > + }; > + > + button@2 { > + label = "Factory Reset Button"; > + linux,code = ; > + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + pinctrl-0 = <&power_led_pin>; > + pinctrl-names = "default"; > + > + power { > + label = "mamba:white:power"; > + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + }; > + }; > + > + gpio_fan { > + /* SUNON HA4010V4-0000-C99 */ > + compatible = "gpio-fan"; > + gpios = <&gpio0 24 0>; > + > + gpio-fan,speed-map = <0 0 > + 4500 1>; > + }; > +}; > + > +&pinctrl { > + > + keys_pin: keys-pin { > + marvell,pins = "mpp32", "mpp33"; > + marvell,function = "gpio"; > + }; > + > + power_led_pin: power-led-pin { > + marvell,pins = "mpp40"; > + marvell,function = "gpio"; > + }; > + > + gpio_fan_pin: gpio-fan-pin { > + marvell,pins = "mpp24"; > + marvell,function = "gpio"; > + }; > +}; > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Mon, 23 Feb 2015 19:32:53 +0100 Subject: [PATCHv3] mvebu: add Linksys WRT1900AC (Mamba) support In-Reply-To: <1424089864-15651-1-git-send-email-kaloz@openwrt.org> References: <1424089864-15651-1-git-send-email-kaloz@openwrt.org> Message-ID: <54EB7255.7090806@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Imre, On 16/02/2015 13:31, Imre Kaloz wrote: > The Linksys WRT1900AC (Mamba) is a router that has > > - 2 mini-PCIe slots with Marvell 88W8864 radios > - 1 USB 3.0 port > - 1 USB 2.0/eSATAp port > - 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) > - 128MB NAND flash > - 256MB RAM > > Signed-off-by: Imre Kaloz > --- > Changes since v2: > * added tlc59116 leds > * added an extra partition for the unused space > * added serial console pinout > * renamed the dts to armada-xp-linksys-mamba.dts > > Changes since v1: > * add dual license > * lower SPI speed to meet the chip's maximum > * pinctrl cleanups based on Andrew Lunn's suggestions > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 348 ++++++++++++++++++++++++++ > 2 files changed, 349 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-xp-linksys-mamba.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 91bd5bd..a84063f 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -541,6 +541,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ > armada-xp-db.dtb \ > armada-xp-gp.dtb \ > armada-xp-lenovo-ix4-300d.dtb \ > + armada-xp-linksys-mamba.dtb \ > armada-xp-matrix.dtb \ > armada-xp-netgear-rn2120.dtb \ > armada-xp-openblocks-ax3-4.dtb \ > diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts > new file mode 100644 > index 0000000..0a3d1d6 > --- /dev/null > +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts > @@ -0,0 +1,348 @@ > +/* > + * Device Tree file for the Linksys WRT1900AC (Mamba). > + * > + * Note: this board is shipped with a new generation boot loader that > + * remaps internal registers at 0xf1000000. Therefore, if earlyprintk > + * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be This symbol name has been removed and DEBUG_MVEBU_UART0_ALTERNATE would be used instead. Besides this, Acked-by: Gregory CLEMENT You don't have to resend a new version for this, I can amend your patch while applying it. So unless there is new comments I will add your patch to the mvebu tree in a couple of days. Thanks, Gregory > + * used. > + * > + * Copyright (C) 2014 Imre Kaloz > + * > + * Based on armada-xp-axpwifiap.dts: > + * > + * Copyright (C) 2013 Marvell > + * > + * Thomas Petazzoni > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without > + * any warranty of any kind, whether express or implied. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include > +#include > +#include "armada-xp-mv78230.dtsi" > + > +/ { > + model = "Linksys WRT1900AC"; > + compatible = "linksys,mamba", "marvell,armadaxp-mv78230", > + "marvell,armadaxp", "marvell,armada-370-xp"; > + > + chosen { > + bootargs = "console=ttyS0,115200"; > + stdout-path = &uart0; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ > + }; > + > + soc { > + ranges = + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; > + > + pcie-controller { > + status = "okay"; > + > + /* Etron EJ168 USB 3.0 controller */ > + pcie at 1,0 { > + /* Port 0, Lane 0 */ > + status = "okay"; > + }; > + > + /* First mini-PCIe port */ > + pcie at 2,0 { > + /* Port 0, Lane 1 */ > + status = "okay"; > + }; > + > + /* Second mini-PCIe port */ > + pcie at 3,0 { > + /* Port 0, Lane 3 */ > + status = "okay"; > + }; > + }; > + > + internal-regs { > + > + /* J10: VCC, NC, RX, NC, TX, GND */ > + serial at 12000 { > + status = "okay"; > + }; > + > + sata at a0000 { > + nr-ports = <1>; > + status = "okay"; > + }; > + > + ethernet at 70000 { > + pinctrl-0 = <&ge0_rgmii_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + phy-mode = "rgmii-id"; > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + > + ethernet at 74000 { > + pinctrl-0 = <&ge1_rgmii_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + phy-mode = "rgmii-id"; > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + > + /* USB part of the eSATA/USB 2.0 port */ > + usb at 50000 { > + status = "okay"; > + }; > + > + i2c at 11000 { > + status = "okay"; > + clock-frequency = <100000>; > + > + tmp421 at 4c { > + compatible = "ti,tmp421"; > + reg = <0x4c>; > + }; > + > + tlc59116 at 68 { > + #address-cells = <1>; > + #size-cells = <0>; > + #gpio-cells = <2>; > + compatible = "ti,tlc59116"; > + reg = <0x68>; > + > + wan_amber at 0 { > + label = "mamba:amber:wan"; > + reg = <0x0>; > + }; > + > + wan_white at 1 { > + label = "mamba:white:wan"; > + reg = <0x1>; > + }; > + > + wlan_2g at 2 { > + label = "mamba:white:wlan_2g"; > + reg = <0x2>; > + }; > + > + wlan_5g at 3 { > + label = "mamba:white:wlan_5g"; > + reg = <0x3>; > + }; > + > + esata at 4 { > + label = "mamba:white:esata"; > + reg = <0x4>; > + }; > + > + usb2 at 5 { > + label = "mamba:white:usb2"; > + reg = <0x5>; > + }; > + > + usb3_1 at 6 { > + label = "mamba:white:usb3_1"; > + reg = <0x6>; > + }; > + > + usb3_2 at 7 { > + label = "mamba:white:usb3_2"; > + reg = <0x7>; > + }; > + > + wps_white at 8 { > + label = "mamba:white:wps"; > + reg = <0x8>; > + }; > + > + wps_amber at 9 { > + label = "mamba:amber:wps"; > + reg = <0x9>; > + }; > + }; > + }; > + > + nand at d0000 { > + status = "okay"; > + num-cs = <1>; > + marvell,nand-keep-config; > + marvell,nand-enable-arbiter; > + nand-on-flash-bbt; > + nand-ecc-strength = <4>; > + nand-ecc-step-size = <512>; > + > + partition at 0 { > + label = "u-boot"; > + reg = <0x0000000 0x100000>; /* 1MB */ > + read-only; > + }; > + > + partition at 100000 { > + label = "u_env"; > + reg = <0x100000 0x40000>; /* 256KB */ > + }; > + > + partition at 140000 { > + label = "s_env"; > + reg = <0x140000 0x40000>; /* 256KB */ > + }; > + > + partition at 900000 { > + label = "devinfo"; > + reg = <0x900000 0x100000>; /* 1MB */ > + read-only; > + }; > + > + /* kernel1 overlaps with rootfs1 by design */ > + partition at a00000 { > + label = "kernel1"; > + reg = <0xa00000 0x2800000>; /* 40MB */ > + }; > + > + partition at d00000 { > + label = "rootfs1"; > + reg = <0xd00000 0x2500000>; /* 37MB */ > + }; > + > + /* kernel2 overlaps with rootfs2 by design */ > + partition at 3200000 { > + label = "kernel2"; > + reg = <0x3200000 0x2800000>; /* 40MB */ > + }; > + > + partition at 3500000 { > + label = "rootfs2"; > + reg = <0x3500000 0x2500000>; /* 37MB */ > + }; > + > + /* > + * 38MB, last MB is for the BBT, not writable */ > + */ > + partition at 5a00000 { > + label = "syscfg"; > + reg = <0x5a00000 0x2600000>; > + }; > + > + /* > + * Unused area between "s_env" and "devinfo". > + * Moved here because otherwise the renumbered > + * partitions would break the bootloader > + * supplied bootargs > + */ > + partition at 180000 { > + label = "unused_area"; > + reg = <0x180000 0x780000>; /* 7.5MB */ > + }; > + }; > + > + spi0: spi at 10600 { > + status = "okay"; > + > + spi-flash at 0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "everspin,mr25h256"; > + reg = <0>; /* Chip select 0 */ > + spi-max-frequency = <40000000>; > + }; > + }; > + }; > + }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-0 = <&keys_pin>; > + pinctrl-names = "default"; > + > + button at 1 { > + label = "WPS"; > + linux,code = ; > + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; > + }; > + > + button at 2 { > + label = "Factory Reset Button"; > + linux,code = ; > + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + pinctrl-0 = <&power_led_pin>; > + pinctrl-names = "default"; > + > + power { > + label = "mamba:white:power"; > + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; > + default-state = "on"; > + }; > + }; > + > + gpio_fan { > + /* SUNON HA4010V4-0000-C99 */ > + compatible = "gpio-fan"; > + gpios = <&gpio0 24 0>; > + > + gpio-fan,speed-map = <0 0 > + 4500 1>; > + }; > +}; > + > +&pinctrl { > + > + keys_pin: keys-pin { > + marvell,pins = "mpp32", "mpp33"; > + marvell,function = "gpio"; > + }; > + > + power_led_pin: power-led-pin { > + marvell,pins = "mpp40"; > + marvell,function = "gpio"; > + }; > + > + gpio_fan_pin: gpio-fan-pin { > + marvell,pins = "mpp24"; > + marvell,function = "gpio"; > + }; > +}; > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com