From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-fsl-qoriq master
Date: Wed, 25 Feb 2015 13:29:17 -0800 [thread overview]
Message-ID: <54EE3EAD.8090403@freescale.com> (raw)
Tom,
The following changes since commit 38dac81b3d0e777f301ca98100bfbcab01d616c2:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2015-02-23 16:18:06 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 94e3c8c4fd7bfe395fa467973cd647551d6d98c7:
crypto/fsl - Add progressive hashing support using hardware acceleration.
(2015-02-25 13:20:02 -0800)
----------------------------------------------------------------
Alison Wang (2):
arm: ls102xa: Define default values for some CCSR macros
arm: ls1021x: Add support for initializing CAAM's stream id
Arnab Basu (2):
ARMv8/fsl-lsch3: Patch cpu node properties in DT for online cores
ARMv8/ls2085a: Switch to passing earlycon to kernel
Bhupesh Sharma (3):
fsl-ch3/lowlevel: TZPC and TZASC programming to configure non-secure accesses
armv8/fsl-lsch3: Add fdt-fixup for clock frequency of the DUART nodes
ls2085/configs: Ensure right banners are printed for EMU and SIMU
J. German Rivera (1):
drivers/mc: Migrated MC Flibs to 0.5.2
Kuldip Giroh (1):
ARMv8/LS2085A: HugeTLB support is required by default in LS NADK
Minghuan Lian (4):
arm/ls102xa: create TLB to map PCIe region
arm/ls102xa: use a array to define pexmscportsr
arm/ls1021a: add PCIe settings
driver/pci: add Layerscape PCIe driver
Stuart Yoder (1):
ARMv8/ls2085a: Move kernel image load address
Volodymyr Riazantsev (1):
mmc: fsl_esdhc: Add support for DDR mode
York Sun (15):
armv8/fsl-lsch3: Change normal memory shareability
armv8/fsl-lsch3: Convert flushing L3 to assembly to avoid using stack
armv8/ls2085a: Enable cluster timebase for all clusters
driver/ddr/fsl: Adjust CAS to preamble override for emulator
driver/ddr/fsl: Add workaround for A008336
driver/ddr/fsl: Add workround for erratumn A008514
armv8/fsl-lsch3: Add support for second DDR clock
driver/ddr/fsl: Add support for multiple DDR clocks
ARMv8/LS2085A: Enable auto precharge for DP-DDR
driver/ddr/fsl: Fix a typo in timing_cfg_8 calculation
ARMv8/LS2085A: Adjust system clock and DDR clock
driver/ddr/fsl: Add sync of refresh
armv8/fsl-lsch3: Enable workaround for A008336
armv8/fsl-lsch3: Enable erratum workround for A008514
armv8/ls2085a_emu: Enable sync of refresh
chenhui zhao (1):
arm: ls102xa: workaround for cache coherency problem
gaurav rana (2):
crypto/fsl: Make function names consistent for blob
encapsulation/decapsulation.
crypto/fsl - Add progressive hashing support using hardware acceleration.
Kconfig | 4 +-
README | 23 +-
arch/arm/cpu/armv7/ls102xa/cpu.c | 231 +++++++++-
arch/arm/cpu/armv8/cache.S | 6 +
arch/arm/cpu/armv8/cache_v8.c | 18 +-
arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 62 +--
arch/arm/cpu/armv8/fsl-lsch3/fdt.c | 28 +-
arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S | 132 ++++++
arch/arm/cpu/armv8/fsl-lsch3/mp.c | 8 +
arch/arm/cpu/armv8/fsl-lsch3/mp.h | 1 +
arch/arm/cpu/armv8/fsl-lsch3/speed.c | 16 +-
arch/arm/include/asm/arch-fsl-lsch3/config.h | 38 ++
arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h | 3 +
arch/arm/include/asm/arch-ls102xa/config.h | 15 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 40 +-
.../include/asm/arch-ls102xa/ls102xa_stream_id.h | 57 +++
arch/arm/include/asm/armv8/mmu.h | 3 +-
arch/arm/include/asm/global_data.h | 3 +
arch/arm/include/asm/system.h | 1 +
arch/arm/lib/bootm.c | 2 +-
board/freescale/common/ls102xa_stream_id.c | 15 +
board/freescale/ls1021aqds/ls1021aqds.c | 21 +
board/freescale/ls1021atwr/ls1021atwr.c | 21 +
board/freescale/ls2085a/ddr.c | 1 +
board/freescale/ls2085a/ls2085a.c | 29 +-
common/cmd_blob.c | 18 +-
common/hash.c | 10 +
doc/README.fsl-trustzone-components | 25 ++
drivers/crypto/fsl/fsl_blob.c | 4 +-
drivers/crypto/fsl/fsl_hash.c | 138 +++++-
drivers/crypto/fsl/fsl_hash.h | 34 ++
drivers/ddr/fsl/arm_ddr_gen3.c | 2 +-
drivers/ddr/fsl/ctrl_regs.c | 216 +++++----
drivers/ddr/fsl/ddr1_dimm_params.c | 18 +-
drivers/ddr/fsl/ddr2_dimm_params.c | 12 +-
drivers/ddr/fsl/ddr3_dimm_params.c | 8 +-
drivers/ddr/fsl/ddr4_dimm_params.c | 8 +-
drivers/ddr/fsl/fsl_ddr_gen4.c | 36 +-
drivers/ddr/fsl/lc_common_dimm_params.c | 27 +-
drivers/ddr/fsl/main.c | 29 +-
drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 4 +-
drivers/ddr/fsl/options.c | 6 +-
drivers/ddr/fsl/util.c | 67 ++-
drivers/mmc/fsl_esdhc.c | 8 +-
drivers/net/Makefile | 2 +-
drivers/net/{fsl_mc => fsl-mc}/Makefile | 4 +-
drivers/net/fsl-mc/dpmng.c | 91 ++++
drivers/net/fsl-mc/fsl_dpmng_cmd.h | 49 ++
drivers/net/{fsl_mc => fsl-mc}/mc.c | 132 ++++--
drivers/net/fsl-mc/mc_sys.c | 63 +++
drivers/pci/pcie_layerscape.c | 471 +++++++++++++++++++-
include/configs/ls1021aqds.h | 24 +
include/configs/ls1021atwr.h | 24 +
include/configs/ls2085a_common.h | 19 +-
include/configs/ls2085a_emu.h | 4 +
include/configs/ls2085a_simu.h | 3 +
include/configs/mx6_common.h | 2 +
include/fsl-mc/fsl_dpmng.h | 121 +++++
include/{ => fsl-mc}/fsl_mc.h | 0
include/fsl-mc/fsl_mc_cmd.h | 132 ++++++
include/fsl-mc/fsl_mc_sys.h | 26 ++
include/fsl_ddr.h | 17 +-
include/fsl_ddr_dimm_params.h | 2 +-
include/fsl_esdhc.h | 1 +
include/fsl_sec.h | 26 ++
include/hw_sha.h | 41 +-
lib/Kconfig | 36 ++
67 files changed, 2404 insertions(+), 334 deletions(-)
create mode 100644 doc/README.fsl-trustzone-components
create mode 100644 drivers/crypto/fsl/fsl_hash.h
rename drivers/net/{fsl_mc => fsl-mc}/Makefile (75%)
create mode 100644 drivers/net/fsl-mc/dpmng.c
create mode 100644 drivers/net/fsl-mc/fsl_dpmng_cmd.h
rename drivers/net/{fsl_mc => fsl-mc}/mc.c (67%)
create mode 100644 drivers/net/fsl-mc/mc_sys.c
create mode 100644 include/fsl-mc/fsl_dpmng.h
rename include/{ => fsl-mc}/fsl_mc.h (100%)
create mode 100644 include/fsl-mc/fsl_mc_cmd.h
create mode 100644 include/fsl-mc/fsl_mc_sys.h
Thanks.
York
next reply other threads:[~2015-02-25 21:29 UTC|newest]
Thread overview: 147+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-25 21:29 York Sun [this message]
2015-02-26 2:58 ` [U-Boot] Please pull u-boot-fsl-qoriq master Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-05-24 5:07 Prabhakar Kushwaha
2019-05-26 10:48 ` Tom Rini
2019-05-22 12:31 Prabhakar Kushwaha
2019-05-22 16:58 ` Tom Rini
2019-03-15 12:54 Prabhakar Kushwaha
2019-03-17 19:30 ` Tom Rini
2019-03-04 8:57 Prabhakar Kushwaha
2019-03-05 2:47 ` Tom Rini
2019-02-20 7:31 Prabhakar Kushwaha
2019-02-21 23:09 ` Tom Rini
2019-01-18 18:09 York Sun
2019-01-19 14:02 ` Tom Rini
2018-09-28 15:04 York Sun
2018-09-30 2:27 ` Tom Rini
2018-08-23 19:01 York Sun
2018-08-24 2:45 ` Tom Rini
2018-08-13 16:19 York Sun
2018-08-13 23:55 ` Tom Rini
2018-06-12 17:24 York Sun
2018-06-12 22:33 ` Tom Rini
2018-06-08 23:49 York Sun
2018-06-09 4:39 ` Tom Rini
2018-06-09 4:46 ` York Sun
2018-06-11 12:25 ` Tom Rini
2018-06-09 4:57 ` York Sun
2018-06-11 12:29 ` Tom Rini
2018-06-11 16:33 ` York Sun
2018-05-11 4:20 York Sun
2018-05-11 15:45 ` Tom Rini
2018-03-20 22:07 York Sun
2018-03-21 1:56 ` Tom Rini
2018-02-12 17:06 York Sun
2018-02-12 22:32 ` Tom Rini
2018-01-31 23:04 York Sun
2018-02-01 13:08 ` Tom Rini
2018-01-24 2:00 York Sun
2018-01-24 16:28 ` Tom Rini
2018-01-17 18:33 York Sun
2018-01-18 13:45 ` Tom Rini
2018-01-11 4:57 York Sun
2018-01-11 18:42 ` Tom Rini
2018-01-05 1:19 York Sun
2018-01-05 16:00 ` York Sun
2017-12-18 16:26 York Sun
2017-12-19 1:56 ` Tom Rini
2017-12-07 22:43 York Sun
2017-12-08 2:49 ` Tom Rini
2017-12-08 14:31 ` Tom Rini
2017-10-27 21:29 York Sun
2017-10-29 11:58 ` Tom Rini
2017-10-12 14:51 York Sun
2017-10-12 22:29 ` Tom Rini
2017-09-23 5:08 York Sun
2017-09-24 14:40 ` Tom Rini
2017-09-12 15:59 York Sun
2017-09-12 21:13 ` Tom Rini
2017-08-10 15:34 York Sun
2017-08-11 2:19 ` Tom Rini
2017-08-11 2:35 ` York Sun
2017-08-11 11:13 ` Tom Rini
2017-08-11 14:35 ` Tom Rini
2017-08-11 14:47 ` York Sun
2017-08-11 14:51 ` Tom Rini
2017-08-01 22:56 York Sun
2017-08-01 23:34 ` Bin Meng
2017-08-03 19:07 ` Tom Rini
2017-06-02 17:46 york sun
2017-06-04 17:11 ` Tom Rini
2017-04-25 15:44 York Sun
2017-04-26 19:16 ` Tom Rini
2017-04-18 15:32 York Sun
2017-04-19 13:02 ` Tom Rini
2017-03-28 18:02 york sun
2017-04-04 19:59 ` Tom Rini
2017-03-14 19:31 york sun
2017-03-09 21:33 york sun
2017-03-10 15:23 ` Tom Rini
2017-03-10 16:46 ` york sun
2017-03-10 21:07 ` Tom Rini
2017-03-10 21:21 ` york sun
2017-03-10 21:42 ` Tom Rini
2017-02-03 22:35 york sun
2017-02-05 16:25 ` Tom Rini
2017-01-19 17:20 york sun
2017-01-20 13:50 ` Tom Rini
2016-12-16 17:43 york sun
2016-12-17 3:18 ` Tom Rini
2016-12-05 19:39 york sun
2016-12-06 0:37 ` Tom Rini
2016-11-23 19:13 york sun
2016-11-29 15:55 ` Tom Rini
2016-11-23 1:06 york sun
2016-11-23 12:22 ` Tom Rini
2016-11-23 16:53 ` york sun
2016-09-20 18:09 york sun
2016-09-20 19:31 ` Tom Rini
2016-09-20 19:55 ` york sun
[not found] ` <0ca4216b-c5ed-b18b-6f75-74c136269d5e@nxp.com>
2016-09-20 20:23 ` york sun
2016-08-02 23:42 york sun
2016-08-03 12:19 ` Tom Rini
2016-07-26 20:28 york sun
2016-07-27 0:58 ` Tom Rini
2016-07-19 20:29 york sun
2016-07-20 2:22 ` Tom Rini
2016-06-10 22:18 York Sun
2016-06-19 14:03 ` Tom Rini
2016-05-24 17:28 York Sun
2016-05-24 23:18 ` Tom Rini
2016-04-06 17:35 York Sun
2016-04-08 19:44 ` Tom Rini
2016-03-29 16:06 York Sun
2016-03-29 22:06 ` Tom Rini
2016-03-22 15:52 york sun
2016-03-23 1:58 ` Tom Rini
2016-02-24 17:02 york sun
2016-02-25 15:22 ` Tom Rini
2016-02-02 2:41 york sun
2016-02-02 15:49 ` Tom Rini
2015-12-17 6:42 York Sun
2015-12-18 0:28 ` Tom Rini
2015-12-15 1:16 York Sun
2015-12-15 23:29 ` Tom Rini
2015-12-16 1:40 ` York Sun
2015-12-16 1:48 ` York Sun
2015-12-16 1:59 ` Tom Rini
2015-12-16 2:01 ` York Sun
2015-12-16 2:14 ` York Sun
2015-11-30 19:32 York Sun
2015-12-01 1:37 ` Tom Rini
2015-10-30 16:26 York Sun
2015-10-30 19:54 ` Tom Rini
2015-09-02 3:00 York Sun
2015-09-02 21:58 ` Tom Rini
2015-08-04 16:08 York Sun
2015-08-04 17:50 ` Tom Rini
2015-07-20 21:07 York Sun
2015-07-21 13:50 ` Tom Rini
2015-05-22 20:55 York Sun
2015-05-23 12:42 ` Tom Rini
2015-04-24 2:17 York Sun
2015-04-28 14:50 ` Tom Rini
2015-01-24 15:44 York Sun
2015-01-27 11:50 ` Tom Rini
2014-10-20 21:29 York Sun
2014-10-21 19:55 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54EE3EAD.8090403@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.