On 26/02/15 16:55, Jyri Sarha wrote:
> Use new binding for the external tda19988 HDMI encoder.
> 
> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> ---
>  arch/arm/boot/dts/am335x-boneblack.dts | 20 +++++++++++++++-----
>  1 file changed, 15 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
> index 5c42d25..eadbba3 100644
> --- a/arch/arm/boot/dts/am335x-boneblack.dts
> +++ b/arch/arm/boot/dts/am335x-boneblack.dts
> @@ -68,16 +68,26 @@
>  
>  &lcdc {
>  	status = "okay";
> +	port {
> +		lcdc_0: endpoint@0 {
> +			remote-endpoint = <&hdmi_0>;
> +		};
> +	};
>  };
>  
> -/ {
> -	hdmi {
> -		compatible = "ti,tilcdc,slave";
> -		i2c = <&i2c0>;
> +&i2c0 {
> +	tda19988 {
> +		compatible = "nxp,tda998x";
> +		reg = <0x70>;
>  		pinctrl-names = "default", "off";
>  		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
>  		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
> -		status = "okay";
> +
> +		port {
> +			hdmi_0: endpoint@0 {
> +				remote-endpoint = <&lcdc_0>;
> +			};
> +		};
>  	};
>  };

This is missing the output of tda998x. It should have two ports, input
and output, output going to hdmi-connector.

 Tomi