From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <54F5E958.2090701@xenomai.org>
Date: Tue, 03 Mar 2015 18:03:20 +0100
From: Philippe Gerum <rpm@xenomai.org>
MIME-Version: 1.0
References: <CAKk99t1N5b0_iQerSxPyKmMTLC8PePTJCO9zzFLdkmt_mDiiVg@mail.gmail.com>	<54F58A4C.7030006@xenomai.org>	<CAKk99t3_g0ZODEe32KGAzfHckWC=-Gqr6CrFa5yRh-hLF5Ttow@mail.gmail.com>	<54F5BE3F.4010008@xenomai.org>	<54F5C020.8090102@xenomai.org>	<CAKk99t14k19FhkgMm1FymkjaKWngMG3FQL8mkm6tBOdth4X7sQ@mail.gmail.com>	<54F5CD4D.8080004@xenomai.org>	<CAKk99t22fhrbc0GwURNJjdUfVfwmBvVyAWYYArVMgJfh4_JF+Q@mail.gmail.com>	<54F5D6C6.40908@xenomai.org>
 <CAKk99t13XsRYBA15ws6ZbUsrqe5+b7D1xRM5NGKrUkvrLJWPCw@mail.gmail.com>
In-Reply-To: <CAKk99t13XsRYBA15ws6ZbUsrqe5+b7D1xRM5NGKrUkvrLJWPCw@mail.gmail.com>
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai] Xenomai/cobalt: low_init(): binding failed: Function
 not implemented error issued when trting to run latency app on xeno 3.x-rc3
List-Id: Discussions about the Xenomai project <xenomai.xenomai.org>
List-Unsubscribe: <http://www.xenomai.org/mailman/options/xenomai>,
 <mailto:xenomai-request@xenomai.org?subject=unsubscribe>
List-Archive: <http://www.xenomai.org/pipermail/xenomai/>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-request@xenomai.org?subject=help>
List-Subscribe: <http://www.xenomai.org/mailman/listinfo/xenomai>,
 <mailto:xenomai-request@xenomai.org?subject=subscribe>
To: Helder Daniel <hdaniel@ualg.pt>
Cc: "Xenomai@xenomai.org" <Xenomai@xenomai.org>

On 03/03/2015 05:38 PM, Helder Daniel wrote:
> 
> On 3 March 2015 at 15:44, Philippe Gerum <rpm@xenomai.org
> <mailto:rpm@xenomai.org>> wrote:
> 
>     On 03/03/2015 04:40 PM, Helder Daniel wrote:
>     > I did not set --prefix.
>     > I assumed the default value will be applied: /usr/xenomai
> 
>     This is the case, unless something goes wrong while configuring. Can you
>     check the value reported in the config log when running the configure
>     script?
> 
> 
> 
> this is the last 20 lines of config.log. Exit status is 0.
> SO it appear that configuring was done properly.

No, this does not prove that all settings were sane. $prefix is clearly
not right in this case, since CONFIG_XENO_PREFIX basically mirrors it.

> but: #define CONFIG_XENO_PREFIX "NONE"
> maybe that's the problem?

Yes, it is for sure the problem. CONFIG_XENO_PREFIX is set to the
$prefix value from the autoconf script. Please attach the file
config.log which was generated by the configure script.

-- 
Philippe.