From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Bosner Subject: Re: assistance recovering failed raid6 array Date: Mon, 20 Feb 2017 19:27:01 +0100 Message-ID: <54F6D166-0D54-49EF-B967-124DC582B299@bosner.de> References: <58AA4B1E.1030809@bosner.de> <5cc1566c-1b4c-c663-56a1-2040b93b46d7@turmel.org> <231629B1-0888-4B3D-BD81-F641937AC045@bosner.de> <676bd1fa-4b97-2c6a-05b8-bd23290fb9a6@turmel.org> Mime-Version: 1.0 (Mac OS X Mail 10.2 \(3259\)) Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: <676bd1fa-4b97-2c6a-05b8-bd23290fb9a6@turmel.org> Sender: linux-raid-owner@vger.kernel.org To: Phil Turmel Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids > On 20 Feb 2017, at 19:11, Phil Turmel wrote: > > Of the 36 original disks, you have 34. You have one incomplete > rebuild, meaning it is still technically a spare. One of the still > active 34 is also showing pending relocations, meaning that disk will > not be able to supply all sectors to complete any recovery. > { /dev/sdah, serial # S1F0FPYR } > > If you have any access to the two "dead" drives, there might be > a slight chance. Since they were likely kicked out due to timeout > mismatch, not a complete failure, this could be possible. > > Otherwise, you are utterly screwed. Sorry. The disks are dead. I already tried different boards but that did not help. What would happen if i recreate the array with —assume-clean ? Would i be able to start the array? Can I mark disks as clean? I actually have one failed disks, one nearly recovered disk and one that has been copied by 2/3 ... Martin