From: Gaku Inami <gaku.inami.xw@bp.renesas.com>
To: linux-sh@vger.kernel.org
Subject: [RFC/PATCH] ARM: shmobile: Consolidate the pm code for R-Car Gen2
Date: Fri, 13 Mar 2015 08:40:08 +0000 [thread overview]
Message-ID: <5502A268.2030304@bp.renesas.com> (raw)
The pm code for R-Car Gen2 is scatterd in each SoC. These files
(pm-r8a7790.c/pm-r8a7791.c) have some overlap code. This change
consolidate the pm code for R-Car Gen2 into one.
Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
---
Based on : renesas-devel-20150312v2-v4.0-rc3
arch/arm/mach-shmobile/Makefile | 5 +-
arch/arm/mach-shmobile/pm-r8a7790.c | 82 ------------------------
arch/arm/mach-shmobile/pm-r8a7791.c | 73 ---------------------
arch/arm/mach-shmobile/pm-rcar-gen2.c | 114 +++++++++++++++++++++++++++++++++
arch/arm/mach-shmobile/r8a7790.h | 1 -
arch/arm/mach-shmobile/r8a7791.h | 1 -
arch/arm/mach-shmobile/rcar-gen2.h | 1 +
arch/arm/mach-shmobile/smp-r8a7790.c | 3 +-
arch/arm/mach-shmobile/smp-r8a7791.c | 2 +-
9 files changed, 121 insertions(+), 161 deletions(-)
delete mode 100644 arch/arm/mach-shmobile/pm-r8a7790.c
delete mode 100644 arch/arm/mach-shmobile/pm-r8a7791.c
create mode 100644 arch/arm/mach-shmobile/pm-rcar-gen2.c
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 9e9d678..56554e0 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -11,8 +11,8 @@ obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o pm-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o pm-r8a7790.o
-obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o pm-r8a7791.o
+obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
+obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o
obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
@@ -49,6 +49,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_PM_RCAR) += pm-rcar.o
obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
+obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o
# Board objects
ifdef CONFIG_ARCH_SHMOBILE_MULTI
diff --git a/arch/arm/mach-shmobile/pm-r8a7790.c b/arch/arm/mach-shmobile/pm-r8a7790.c
deleted file mode 100644
index 23b61f1..0000000
--- a/arch/arm/mach-shmobile/pm-r8a7790.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * r8a7790 Power management support
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <asm/io.h>
-#include "common.h"
-#include "pm-rcar.h"
-#include "r8a7790.h"
-
-/* RST */
-#define RST 0xe6160000
-#define CA15BAR 0x0020
-#define CA7BAR 0x0030
-#define CA15RESCNT 0x0040
-#define CA7RESCNT 0x0044
-
-/* On-chip RAM */
-#define MERAM 0xe8080000
-
-/* SYSC */
-#define SYSCIER 0x0c
-#define SYSCIMR 0x10
-
-#if defined(CONFIG_SMP)
-
-static void __init r8a7790_sysc_init(void)
-{
- void __iomem *base = rcar_sysc_init(0xe6180000);
-
- /* enable all interrupt sources, but do not use interrupt handler */
- iowrite32(0x013111ef, base + SYSCIER);
- iowrite32(0, base + SYSCIMR);
-}
-
-#else /* CONFIG_SMP */
-
-static inline void r8a7790_sysc_init(void) {}
-
-#endif /* CONFIG_SMP */
-
-void __init r8a7790_pm_init(void)
-{
- void __iomem *p;
- u32 bar;
- static int once;
-
- if (once++)
- return;
-
- /* MERAM for jump stub, because BAR requires 256KB aligned address */
- p = ioremap_nocache(MERAM, shmobile_boot_size);
- memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
- iounmap(p);
-
- /* setup reset vectors */
- p = ioremap_nocache(RST, 0x63);
- bar = (MERAM >> 8) & 0xfffffc00;
- writel_relaxed(bar, p + CA15BAR);
- writel_relaxed(bar, p + CA7BAR);
- writel_relaxed(bar | 0x10, p + CA15BAR);
- writel_relaxed(bar | 0x10, p + CA7BAR);
-
- /* de-assert reset for all CPUs */
- writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
- p + CA15RESCNT);
- writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) | 0x5a5a0000,
- p + CA7RESCNT);
- iounmap(p);
-
- r8a7790_sysc_init();
- shmobile_smp_apmu_suspend_init();
-}
diff --git a/arch/arm/mach-shmobile/pm-r8a7791.c b/arch/arm/mach-shmobile/pm-r8a7791.c
deleted file mode 100644
index f7cfb3b..0000000
--- a/arch/arm/mach-shmobile/pm-r8a7791.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * r8a7791 Power management support
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <asm/io.h>
-#include "common.h"
-#include "pm-rcar.h"
-#include "r8a7791.h"
-
-#define RST 0xe6160000
-#define CA15BAR 0x0020
-#define CA15RESCNT 0x0040
-#define RAM 0xe6300000
-
-/* SYSC */
-#define SYSCIER 0x0c
-#define SYSCIMR 0x10
-
-#if defined(CONFIG_SMP)
-
-static void __init r8a7791_sysc_init(void)
-{
- void __iomem *base = rcar_sysc_init(0xe6180000);
-
- /* enable all interrupt sources, but do not use interrupt handler */
- iowrite32(0x00111003, base + SYSCIER);
- iowrite32(0, base + SYSCIMR);
-}
-
-#else /* CONFIG_SMP */
-
-static inline void r8a7791_sysc_init(void) {}
-
-#endif /* CONFIG_SMP */
-
-void __init r8a7791_pm_init(void)
-{
- void __iomem *p;
- u32 bar;
- static int once;
-
- if (once++)
- return;
-
- /* RAM for jump stub, because BAR requires 256KB aligned address */
- p = ioremap_nocache(RAM, shmobile_boot_size);
- memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
- iounmap(p);
-
- /* setup reset vectors */
- p = ioremap_nocache(RST, 0x63);
- bar = (RAM >> 8) & 0xfffffc00;
- writel_relaxed(bar, p + CA15BAR);
- writel_relaxed(bar | 0x10, p + CA15BAR);
-
- /* enable clocks to all CPUs */
- writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) | 0xa5a50000,
- p + CA15RESCNT);
- iounmap(p);
-
- r8a7791_sysc_init();
- shmobile_smp_apmu_suspend_init();
-}
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
new file mode 100644
index 0000000..4585938
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -0,0 +1,114 @@
+/*
+ * R-Car Generation 2 Power management support
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <asm/io.h>
+#include "common.h"
+#include "pm-rcar.h"
+#include "rcar-gen2.h"
+
+/* RST */
+#define RST 0xe6160000
+#define CA15BAR 0x0020
+#define CA7BAR 0x0030
+#define CA15RESCNT 0x0040
+#define CA7RESCNT 0x0044
+
+/* On-chip RAM */
+#define MERAM 0xe8080000
+#define RAM 0xe6300000
+
+/* SYSC */
+#define SYSCIER 0x0c
+#define SYSCIMR 0x10
+
+#if defined(CONFIG_SMP)
+
+static void __init rcar_gen2_sysc_init(void)
+{
+ u32 val;
+ void __iomem *base = rcar_sysc_init(0xe6180000);
+
+ if (of_machine_is_compatible("renesas,r8a7790"))
+ val = 0x013111ef;
+ else if (of_machine_is_compatible("renesas,r8a7791"))
+ val = 0x00111003;
+
+ /* enable all interrupt sources, but do not use interrupt handler */
+ iowrite32(val, base + SYSCIER);
+ iowrite32(0, base + SYSCIMR);
+}
+
+#else /* CONFIG_SMP */
+
+static inline void rcar_gen2_sysc_init(void) {}
+
+#endif /* CONFIG_SMP */
+
+void __init rcar_gen2_pm_init(void)
+{
+ void __iomem *p;
+ u32 bar;
+ static int once;
+ struct device_node *np, *cpus;
+ bool is_a7 = false;
+ bool is_a15 = false;
+ phys_addr_t boot_vector_addr = 0;
+
+ if (once++)
+ return;
+
+ cpus = of_find_node_by_path("/cpus");
+ if (!cpus)
+ return;
+
+ for_each_child_of_node(cpus, np) {
+ if (of_device_is_compatible(np, "arm,cortex-a15"))
+ is_a15 = true;
+ else if (of_device_is_compatible(np, "arm,cortex-a7"))
+ is_a7 = true;
+ }
+
+ if (of_machine_is_compatible("renesas,r8a7790"))
+ boot_vector_addr = MERAM;
+ else
+ boot_vector_addr = RAM;
+
+ /* RAM for jump stub, because BAR requires 256KB aligned address */
+ p = ioremap_nocache(boot_vector_addr, shmobile_boot_size);
+ memcpy_toio(p, shmobile_boot_vector, shmobile_boot_size);
+ iounmap(p);
+
+ /* setup reset vectors */
+ p = ioremap_nocache(RST, 0x63);
+ bar = (boot_vector_addr >> 8) & 0xfffffc00;
+ if (is_a15) {
+ writel_relaxed(bar, p + CA15BAR);
+ writel_relaxed(bar | 0x10, p + CA15BAR);
+
+ /* de-assert reset for CA15 CPUs */
+ writel_relaxed((readl_relaxed(p + CA15RESCNT) & ~0x0f) |
+ 0xa5a50000, p + CA15RESCNT);
+ }
+ if (is_a7) {
+ writel_relaxed(bar, p + CA7BAR);
+ writel_relaxed(bar | 0x10, p + CA7BAR);
+
+ /* de-assert reset for CA7 CPUs */
+ writel_relaxed((readl_relaxed(p + CA7RESCNT) & ~0x0f) |
+ 0x5a5a0000, p + CA7RESCNT);
+ }
+ iounmap(p);
+
+ rcar_gen2_sysc_init();
+ shmobile_smp_apmu_suspend_init();
+}
diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h
index bf73a85..1a46d02 100644
--- a/arch/arm/mach-shmobile/r8a7790.h
+++ b/arch/arm/mach-shmobile/r8a7790.h
@@ -1,7 +1,6 @@
#ifndef __ASM_R8A7790_H__
#define __ASM_R8A7790_H__
-void r8a7790_pm_init(void);
extern struct smp_operations r8a7790_smp_ops;
#endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h
index 6cf11eb..7ca0b7d 100644
--- a/arch/arm/mach-shmobile/r8a7791.h
+++ b/arch/arm/mach-shmobile/r8a7791.h
@@ -1,7 +1,6 @@
#ifndef __ASM_R8A7791_H__
#define __ASM_R8A7791_H__
-void r8a7791_pm_init(void);
extern struct smp_operations r8a7791_smp_ops;
#endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/rcar-gen2.h b/arch/arm/mach-shmobile/rcar-gen2.h
index ce53cb5..8a66b4a 100644
--- a/arch/arm/mach-shmobile/rcar-gen2.h
+++ b/arch/arm/mach-shmobile/rcar-gen2.h
@@ -5,5 +5,6 @@ void rcar_gen2_timer_init(void);
#define MD(nr) BIT(nr)
u32 rcar_gen2_read_mode_pins(void);
void rcar_gen2_reserve(void);
+void rcar_gen2_pm_init(void);
#endif /* __ASM_RCAR_GEN2_H__ */
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
index a5bef87..930f45c 100644
--- a/arch/arm/mach-shmobile/smp-r8a7790.c
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -23,6 +23,7 @@
#include "common.h"
#include "platsmp-apmu.h"
#include "pm-rcar.h"
+#include "rcar-gen2.h"
#include "r8a7790.h"
static struct rcar_sysc_ch r8a7790_ca15_scu = {
@@ -54,7 +55,7 @@ static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
ARRAY_SIZE(r8a7790_apmu_config));
/* turn on power to SCU */
- r8a7790_pm_init();
+ rcar_gen2_pm_init();
rcar_sysc_power_up(&r8a7790_ca15_scu);
rcar_sysc_power_up(&r8a7790_ca7_scu);
}
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index de1d92d..5e2d1db 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -39,7 +39,7 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
r8a7791_apmu_config,
ARRAY_SIZE(r8a7791_apmu_config));
- r8a7791_pm_init();
+ rcar_gen2_pm_init();
}
static int r8a7791_smp_boot_secondary(unsigned int cpu,
--
1.7.9.5
next reply other threads:[~2015-03-13 8:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-13 8:40 Gaku Inami [this message]
2015-03-13 9:39 ` [RFC/PATCH] ARM: shmobile: Consolidate the pm code for R-Car Gen2 Geert Uytterhoeven
2015-03-16 4:30 ` Gaku Inami
2015-03-25 5:45 ` [RFC/PATCH] ARM: shmobile: Consolidate the smp " Gaku Inami
2015-04-01 13:31 ` Geert Uytterhoeven
2015-04-02 8:18 ` Gaku Inami
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5502A268.2030304@bp.renesas.com \
--to=gaku.inami.xw@bp.renesas.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.