[PATCH] Bluetooth: btmrvl: eliminate duplicates introducing btmrvl_reg_89xx

[PATCH] Bluetooth: btmrvl: eliminate duplicates introducing btmrvl_reg_89xx

[Tamás Szűcs]

SD89xx devices use identical card register settings. Make sure a single common
instance is used to describe them.

Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>
---
 drivers/bluetooth/btmrvl_sdio.c | 54 +++------------------------------
 1 file changed, 4 insertions(+), 50 deletions(-)

diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index cfb9f9db44a0..92b28ff331b4 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -215,30 +215,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8897 = {
 	.fw_dump_end = 0xea,
 };
 
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8977 = {
-	.cfg = 0x00,
-	.host_int_mask = 0x08,
-	.host_intstatus = 0x0c,
-	.card_status = 0x5c,
-	.sq_read_base_addr_a0 = 0xf8,
-	.sq_read_base_addr_a1 = 0xf9,
-	.card_revision = 0xc8,
-	.card_fw_status0 = 0xe8,
-	.card_fw_status1 = 0xe9,
-	.card_rx_len = 0xea,
-	.card_rx_unit = 0xeb,
-	.io_port_0 = 0xe4,
-	.io_port_1 = 0xe5,
-	.io_port_2 = 0xe6,
-	.int_read_to_clear = true,
-	.host_int_rsr = 0x04,
-	.card_misc_cfg = 0xD8,
-	.fw_dump_ctrl = 0xf0,
-	.fw_dump_start = 0xf1,
-	.fw_dump_end = 0xf8,
-};
-
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8987 = {
+static const struct btmrvl_sdio_card_reg btmrvl_reg_89xx = {
 	.cfg = 0x00,
 	.host_int_mask = 0x08,
 	.host_intstatus = 0x0c,
@@ -261,29 +238,6 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8987 = {
 	.fw_dump_end = 0xf8,
 };
 
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8997 = {
-	.cfg = 0x00,
-	.host_int_mask = 0x08,
-	.host_intstatus = 0x0c,
-	.card_status = 0x5c,
-	.sq_read_base_addr_a0 = 0xf8,
-	.sq_read_base_addr_a1 = 0xf9,
-	.card_revision = 0xc8,
-	.card_fw_status0 = 0xe8,
-	.card_fw_status1 = 0xe9,
-	.card_rx_len = 0xea,
-	.card_rx_unit = 0xeb,
-	.io_port_0 = 0xe4,
-	.io_port_1 = 0xe5,
-	.io_port_2 = 0xe6,
-	.int_read_to_clear = true,
-	.host_int_rsr = 0x04,
-	.card_misc_cfg = 0xD8,
-	.fw_dump_ctrl = 0xf0,
-	.fw_dump_start = 0xf1,
-	.fw_dump_end = 0xf8,
-};
-
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 	.helper		= "mrvl/sd8688_helper.bin",
 	.firmware	= "mrvl/sd8688.bin",
@@ -332,7 +286,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
 	.helper         = NULL,
 	.firmware       = "mrvl/sdsd8977_combo_v2.bin",
-	.reg            = &btmrvl_reg_8977,
+	.reg            = &btmrvl_reg_89xx,
 	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl = 256,
 	.supports_fw_dump = true,
@@ -341,7 +295,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8977 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8987 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8987_uapsta.bin",
-	.reg		= &btmrvl_reg_8987,
+	.reg		= &btmrvl_reg_89xx,
 	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl	= 256,
 	.supports_fw_dump = true,
@@ -350,7 +304,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8987 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8997 = {
 	.helper         = NULL,
 	.firmware       = "mrvl/sdsd8997_combo_v4.bin",
-	.reg            = &btmrvl_reg_8997,
+	.reg            = &btmrvl_reg_89xx,
 	.support_pscan_win_report = true,
 	.sd_blksz_fw_dl = 256,
 	.supports_fw_dump = true,
-- 
2.20.1

Re: [PATCH] Bluetooth: btmrvl: eliminate duplicates introducing btmrvl_reg_89xx

[Marcel Holtmann]

Hi Tamas,

> SD89xx devices use identical card register settings. Make sure a single common
> instance is used to describe them.
> 
> Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>
> ---
> drivers/bluetooth/btmrvl_sdio.c | 54 +++------------------------------
> 1 file changed, 4 insertions(+), 50 deletions(-)

patch has been applied to bluetooth-next tree.

Regards

Marcel