From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752249AbbCZBSN (ORCPT ); Wed, 25 Mar 2015 21:18:13 -0400 Received: from szxga03-in.huawei.com ([119.145.14.66]:14619 "EHLO szxga03-in.huawei.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751220AbbCZBSI (ORCPT ); Wed, 25 Mar 2015 21:18:08 -0400 Message-ID: <55135E16.6060909@huawei.com> Date: Thu, 26 Mar 2015 09:17:10 +0800 From: Yijing Wang User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Thunderbird/24.0.1 MIME-Version: 1.0 To: Daniel Axtens CC: Liviu Dudau , Rusty Russell , , Arnd Bergmann , Marc Zyngier , , , , "David S. Miller" , , , Tony Luck , Geert Uytterhoeven , , Bjorn Helgaas , "Russell King" , Thomas Gleixner , "Guan Xuetao" , Yinghai Lu , Jiang Liu , Subject: Re: [PATCH v8 19/30] powerpc/pci: Use pci_scan_host_bridge() for simplicity References: <1427168064-8657-1-git-send-email-wangyijing@huawei.com> <1427168064-8657-20-git-send-email-wangyijing@huawei.com> <1427241523.2685.18.camel@axtens.net> <551266DE.3030609@huawei.com> <1427321631.2575.3.camel@axtens.net> In-Reply-To: <1427321631.2575.3.camel@axtens.net> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Originating-IP: [10.177.27.212] X-CFilter-Loop: Reflected X-Mirapoint-Virus-RAPID-Raw: score=unknown(0), refid=str=0001.0A020201.55135E27.00AB,ss=1,re=0.001,recu=0.000,reip=0.000,cl=1,cld=1,fgs=0, ip=0.0.0.0, so=2013-05-26 15:14:31, dmn=2013-03-21 17:37:32 X-Mirapoint-Loop-Id: 7b6f732335e143825c02d4861aa30225 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 2015/3/26 6:13, Daniel Axtens wrote: > Hi Yijing, > > I wasn't quite sure I understood your comments, so I was trying to apply > your patch series and test it, but patch 3 doesn't apply cleanly to > 4.0-rc5 or master. Can you respin the series? Hi Daniel, Could you pull the series from Bjorn's git tree ? The URL is https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/enumeration-yw8 Thanks! Yijing. > > Thanks, > Daniel > > >> Hi Daniel, thanks for your review and comments. We want to make a generic pci_host_bridge, >> which would hold the common host information, for example, pci domain is common info for >> pci host bridge, this series saved domain in pci_host_bridge, then we no need to >> extract out domain by pci_bus->sysdata by platform specific pci_domain_nr(). >> Also we store the sysdata in pci_host_bridge, and pci_bus_to_host() is the platform >> interface, I think use the common interface would be better. >> >>>> + >>>> + /* Get probe mode and perform scan */ >>>> + if (hose->dn && ppc_md.pci_probe_mode) >>>> + mode = ppc_md.pci_probe_mode(bus); >>>> + >>>> + pr_debug(" probe mode: %d\n", mode); >>>> + if (mode == PCI_PROBE_DEVTREE) >>>> + of_scan_bus(hose->dn, bus); >>>> + >>>> + if (mode == PCI_PROBE_NORMAL) { >>>> + pci_bus_update_busn_res_end(bus, 255); >>>> + hose->last_busno = pci_scan_child_bus(bus); >>>> + pci_bus_update_busn_res_end(bus, hose->last_busno); >>>> + } >>>> + >>>> + return pci_bus_child_max_busnr(bus); >>>> +} >>>> + >>> I'm having trouble convincing myself that this patch covers every >>> variation within our PCI implementations. In particular, there's a >>> stanza in of_scan_pci_bridge in kernel/pci_of_scan.c that's almost >>> identical to this function. Does that implementation need to be cleaned >>> up and replaced with this function too? >>> >> >> This is a pci_host_bridge_ops hook function, which would be called in >> PCI core, and after applied this series, we only need to call pci_scan_host_bridge() >> to scan pci devices, and this function is also extracted from the pcibios_scan_phb(), >> it's not the redundant code. >> >>> >>>> @@ -1641,9 +1655,9 @@ void pcibios_scan_phb(struct pci_controller *hose) >>>> ppc_md.pcibios_fixup_phb(hose); >>>> >>>> /* Configure PCI Express settings */ >>>> - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> + if (host->bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> struct pci_bus *child; >>>> - list_for_each_entry(child, &bus->children, node) >>>> + list_for_each_entry(child, &host->bus->children, node) >>>> pcie_bus_configure_settings(child); >>>> } >>>> } >>> Two things: Firstly, the function uses hose throughout, not host. >>> Secondly, you're not deleting the bus variable: what's the purpose of >>> this change? >> >> host is the common pci_host_bridge which is created by PCI core for pci host bridge driver, >> the hose is the platform data used in powerpc. The purpose of the patch/series is to simplify >> pci enumeration interface, and try to reduce the weak functions which were used to setup pci bus/devices >> during PCI enumeration. >> >>> >>> Regards, >>> Daniel >>> >> >> > -- Thanks! Yijing From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yijing Wang Subject: Re: [PATCH v8 19/30] powerpc/pci: Use pci_scan_host_bridge() for simplicity Date: Thu, 26 Mar 2015 09:17:10 +0800 Message-ID: <55135E16.6060909@huawei.com> References: <1427168064-8657-1-git-send-email-wangyijing@huawei.com> <1427168064-8657-20-git-send-email-wangyijing@huawei.com> <1427241523.2685.18.camel@axtens.net> <551266DE.3030609@huawei.com> <1427321631.2575.3.camel@axtens.net> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1427321631.2575.3.camel@axtens.net> Sender: linux-m68k-owner@vger.kernel.org List-Id: linux-m68k@vger.kernel.org To: Daniel Axtens Cc: Liviu Dudau , Rusty Russell , linux-ia64@vger.kernel.org, Arnd Bergmann , Marc Zyngier , linux-pci@vger.kernel.org, x86@kernel.org, linux-kernel@vger.kernel.org, "David S. Miller" , linuxppc-dev@lists.ozlabs.org, linux-m68k@lists.linux-m68k.org, Tony Luck , Geert Uytterhoeven , linux-alpha@vger.kernel.org, Bjorn Helgaas , Russell King , Thomas Gleixner , Guan Xuetao , Yinghai Lu , Jiang Liu , linux-arm-kernel@lists.infradead.org On 2015/3/26 6:13, Daniel Axtens wrote: > Hi Yijing, > > I wasn't quite sure I understood your comments, so I was trying to apply > your patch series and test it, but patch 3 doesn't apply cleanly to > 4.0-rc5 or master. Can you respin the series? Hi Daniel, Could you pull the series from Bjorn's git tree ? The URL is https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/enumeration-yw8 Thanks! Yijing. > > Thanks, > Daniel > > >> Hi Daniel, thanks for your review and comments. We want to make a generic pci_host_bridge, >> which would hold the common host information, for example, pci domain is common info for >> pci host bridge, this series saved domain in pci_host_bridge, then we no need to >> extract out domain by pci_bus->sysdata by platform specific pci_domain_nr(). >> Also we store the sysdata in pci_host_bridge, and pci_bus_to_host() is the platform >> interface, I think use the common interface would be better. >> >>>> + >>>> + /* Get probe mode and perform scan */ >>>> + if (hose->dn && ppc_md.pci_probe_mode) >>>> + mode = ppc_md.pci_probe_mode(bus); >>>> + >>>> + pr_debug(" probe mode: %d\n", mode); >>>> + if (mode == PCI_PROBE_DEVTREE) >>>> + of_scan_bus(hose->dn, bus); >>>> + >>>> + if (mode == PCI_PROBE_NORMAL) { >>>> + pci_bus_update_busn_res_end(bus, 255); >>>> + hose->last_busno = pci_scan_child_bus(bus); >>>> + pci_bus_update_busn_res_end(bus, hose->last_busno); >>>> + } >>>> + >>>> + return pci_bus_child_max_busnr(bus); >>>> +} >>>> + >>> I'm having trouble convincing myself that this patch covers every >>> variation within our PCI implementations. In particular, there's a >>> stanza in of_scan_pci_bridge in kernel/pci_of_scan.c that's almost >>> identical to this function. Does that implementation need to be cleaned >>> up and replaced with this function too? >>> >> >> This is a pci_host_bridge_ops hook function, which would be called in >> PCI core, and after applied this series, we only need to call pci_scan_host_bridge() >> to scan pci devices, and this function is also extracted from the pcibios_scan_phb(), >> it's not the redundant code. >> >>> >>>> @@ -1641,9 +1655,9 @@ void pcibios_scan_phb(struct pci_controller *hose) >>>> ppc_md.pcibios_fixup_phb(hose); >>>> >>>> /* Configure PCI Express settings */ >>>> - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> + if (host->bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> struct pci_bus *child; >>>> - list_for_each_entry(child, &bus->children, node) >>>> + list_for_each_entry(child, &host->bus->children, node) >>>> pcie_bus_configure_settings(child); >>>> } >>>> } >>> Two things: Firstly, the function uses hose throughout, not host. >>> Secondly, you're not deleting the bus variable: what's the purpose of >>> this change? >> >> host is the common pci_host_bridge which is created by PCI core for pci host bridge driver, >> the hose is the platform data used in powerpc. The purpose of the patch/series is to simplify >> pci enumeration interface, and try to reduce the weak functions which were used to setup pci bus/devices >> during PCI enumeration. >> >>> >>> Regards, >>> Daniel >>> >> >> > -- Thanks! Yijing From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <55135E16.6060909@huawei.com> Date: Thu, 26 Mar 2015 09:17:10 +0800 From: Yijing Wang MIME-Version: 1.0 To: Daniel Axtens CC: Liviu Dudau , Rusty Russell , , Arnd Bergmann , Marc Zyngier , , , , "David S. Miller" , , , Tony Luck , Geert Uytterhoeven , , Bjorn Helgaas , "Russell King" , Thomas Gleixner , "Guan Xuetao" , Yinghai Lu , Jiang Liu , Subject: Re: [PATCH v8 19/30] powerpc/pci: Use pci_scan_host_bridge() for simplicity References: <1427168064-8657-1-git-send-email-wangyijing@huawei.com> <1427168064-8657-20-git-send-email-wangyijing@huawei.com> <1427241523.2685.18.camel@axtens.net> <551266DE.3030609@huawei.com> <1427321631.2575.3.camel@axtens.net> In-Reply-To: <1427321631.2575.3.camel@axtens.net> Content-Type: text/plain; charset="UTF-8" Sender: linux-kernel-owner@vger.kernel.org List-ID: On 2015/3/26 6:13, Daniel Axtens wrote: > Hi Yijing, > > I wasn't quite sure I understood your comments, so I was trying to apply > your patch series and test it, but patch 3 doesn't apply cleanly to > 4.0-rc5 or master. Can you respin the series? Hi Daniel, Could you pull the series from Bjorn's git tree ? The URL is https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/enumeration-yw8 Thanks! Yijing. > > Thanks, > Daniel > > >> Hi Daniel, thanks for your review and comments. We want to make a generic pci_host_bridge, >> which would hold the common host information, for example, pci domain is common info for >> pci host bridge, this series saved domain in pci_host_bridge, then we no need to >> extract out domain by pci_bus->sysdata by platform specific pci_domain_nr(). >> Also we store the sysdata in pci_host_bridge, and pci_bus_to_host() is the platform >> interface, I think use the common interface would be better. >> >>>> + >>>> + /* Get probe mode and perform scan */ >>>> + if (hose->dn && ppc_md.pci_probe_mode) >>>> + mode = ppc_md.pci_probe_mode(bus); >>>> + >>>> + pr_debug(" probe mode: %d\n", mode); >>>> + if (mode == PCI_PROBE_DEVTREE) >>>> + of_scan_bus(hose->dn, bus); >>>> + >>>> + if (mode == PCI_PROBE_NORMAL) { >>>> + pci_bus_update_busn_res_end(bus, 255); >>>> + hose->last_busno = pci_scan_child_bus(bus); >>>> + pci_bus_update_busn_res_end(bus, hose->last_busno); >>>> + } >>>> + >>>> + return pci_bus_child_max_busnr(bus); >>>> +} >>>> + >>> I'm having trouble convincing myself that this patch covers every >>> variation within our PCI implementations. In particular, there's a >>> stanza in of_scan_pci_bridge in kernel/pci_of_scan.c that's almost >>> identical to this function. Does that implementation need to be cleaned >>> up and replaced with this function too? >>> >> >> This is a pci_host_bridge_ops hook function, which would be called in >> PCI core, and after applied this series, we only need to call pci_scan_host_bridge() >> to scan pci devices, and this function is also extracted from the pcibios_scan_phb(), >> it's not the redundant code. >> >>> >>>> @@ -1641,9 +1655,9 @@ void pcibios_scan_phb(struct pci_controller *hose) >>>> ppc_md.pcibios_fixup_phb(hose); >>>> >>>> /* Configure PCI Express settings */ >>>> - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> + if (host->bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> struct pci_bus *child; >>>> - list_for_each_entry(child, &bus->children, node) >>>> + list_for_each_entry(child, &host->bus->children, node) >>>> pcie_bus_configure_settings(child); >>>> } >>>> } >>> Two things: Firstly, the function uses hose throughout, not host. >>> Secondly, you're not deleting the bus variable: what's the purpose of >>> this change? >> >> host is the common pci_host_bridge which is created by PCI core for pci host bridge driver, >> the hose is the platform data used in powerpc. The purpose of the patch/series is to simplify >> pci enumeration interface, and try to reduce the weak functions which were used to setup pci bus/devices >> during PCI enumeration. >> >>> >>> Regards, >>> Daniel >>> >> >> > -- Thanks! Yijing From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from szxga03-in.huawei.com (szxga03-in.huawei.com [119.145.14.66]) (using TLSv1 with cipher RC4-SHA (128/128 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 234E91A0671 for ; Thu, 26 Mar 2015 12:24:56 +1100 (AEDT) Message-ID: <55135E16.6060909@huawei.com> Date: Thu, 26 Mar 2015 09:17:10 +0800 From: Yijing Wang MIME-Version: 1.0 To: Daniel Axtens Subject: Re: [PATCH v8 19/30] powerpc/pci: Use pci_scan_host_bridge() for simplicity References: <1427168064-8657-1-git-send-email-wangyijing@huawei.com> <1427168064-8657-20-git-send-email-wangyijing@huawei.com> <1427241523.2685.18.camel@axtens.net> <551266DE.3030609@huawei.com> <1427321631.2575.3.camel@axtens.net> In-Reply-To: <1427321631.2575.3.camel@axtens.net> Content-Type: text/plain; charset="UTF-8" Cc: Liviu Dudau , x86@kernel.org, linux-ia64@vger.kernel.org, Arnd Bergmann , Marc Zyngier , linux-pci@vger.kernel.org, Rusty Russell , linux-kernel@vger.kernel.org, Jiang Liu , linux-m68k@lists.linux-m68k.org, Tony Luck , Geert Uytterhoeven , Yinghai Lu , linux-alpha@vger.kernel.org, Bjorn Helgaas , Russell King , Thomas Gleixner , Guan Xuetao , linuxppc-dev@lists.ozlabs.org, "David S. Miller" , linux-arm-kernel@lists.infradead.org List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On 2015/3/26 6:13, Daniel Axtens wrote: > Hi Yijing, > > I wasn't quite sure I understood your comments, so I was trying to apply > your patch series and test it, but patch 3 doesn't apply cleanly to > 4.0-rc5 or master. Can you respin the series? Hi Daniel, Could you pull the series from Bjorn's git tree ? The URL is https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/enumeration-yw8 Thanks! Yijing. > > Thanks, > Daniel > > >> Hi Daniel, thanks for your review and comments. We want to make a generic pci_host_bridge, >> which would hold the common host information, for example, pci domain is common info for >> pci host bridge, this series saved domain in pci_host_bridge, then we no need to >> extract out domain by pci_bus->sysdata by platform specific pci_domain_nr(). >> Also we store the sysdata in pci_host_bridge, and pci_bus_to_host() is the platform >> interface, I think use the common interface would be better. >> >>>> + >>>> + /* Get probe mode and perform scan */ >>>> + if (hose->dn && ppc_md.pci_probe_mode) >>>> + mode = ppc_md.pci_probe_mode(bus); >>>> + >>>> + pr_debug(" probe mode: %d\n", mode); >>>> + if (mode == PCI_PROBE_DEVTREE) >>>> + of_scan_bus(hose->dn, bus); >>>> + >>>> + if (mode == PCI_PROBE_NORMAL) { >>>> + pci_bus_update_busn_res_end(bus, 255); >>>> + hose->last_busno = pci_scan_child_bus(bus); >>>> + pci_bus_update_busn_res_end(bus, hose->last_busno); >>>> + } >>>> + >>>> + return pci_bus_child_max_busnr(bus); >>>> +} >>>> + >>> I'm having trouble convincing myself that this patch covers every >>> variation within our PCI implementations. In particular, there's a >>> stanza in of_scan_pci_bridge in kernel/pci_of_scan.c that's almost >>> identical to this function. Does that implementation need to be cleaned >>> up and replaced with this function too? >>> >> >> This is a pci_host_bridge_ops hook function, which would be called in >> PCI core, and after applied this series, we only need to call pci_scan_host_bridge() >> to scan pci devices, and this function is also extracted from the pcibios_scan_phb(), >> it's not the redundant code. >> >>> >>>> @@ -1641,9 +1655,9 @@ void pcibios_scan_phb(struct pci_controller *hose) >>>> ppc_md.pcibios_fixup_phb(hose); >>>> >>>> /* Configure PCI Express settings */ >>>> - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> + if (host->bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> struct pci_bus *child; >>>> - list_for_each_entry(child, &bus->children, node) >>>> + list_for_each_entry(child, &host->bus->children, node) >>>> pcie_bus_configure_settings(child); >>>> } >>>> } >>> Two things: Firstly, the function uses hose throughout, not host. >>> Secondly, you're not deleting the bus variable: what's the purpose of >>> this change? >> >> host is the common pci_host_bridge which is created by PCI core for pci host bridge driver, >> the hose is the platform data used in powerpc. The purpose of the patch/series is to simplify >> pci enumeration interface, and try to reduce the weak functions which were used to setup pci bus/devices >> during PCI enumeration. >> >>> >>> Regards, >>> Daniel >>> >> >> > -- Thanks! Yijing From mboxrd@z Thu Jan 1 00:00:00 1970 From: wangyijing@huawei.com (Yijing Wang) Date: Thu, 26 Mar 2015 09:17:10 +0800 Subject: [PATCH v8 19/30] powerpc/pci: Use pci_scan_host_bridge() for simplicity In-Reply-To: <1427321631.2575.3.camel@axtens.net> References: <1427168064-8657-1-git-send-email-wangyijing@huawei.com> <1427168064-8657-20-git-send-email-wangyijing@huawei.com> <1427241523.2685.18.camel@axtens.net> <551266DE.3030609@huawei.com> <1427321631.2575.3.camel@axtens.net> Message-ID: <55135E16.6060909@huawei.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 2015/3/26 6:13, Daniel Axtens wrote: > Hi Yijing, > > I wasn't quite sure I understood your comments, so I was trying to apply > your patch series and test it, but patch 3 doesn't apply cleanly to > 4.0-rc5 or master. Can you respin the series? Hi Daniel, Could you pull the series from Bjorn's git tree ? The URL is https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/enumeration-yw8 Thanks! Yijing. > > Thanks, > Daniel > > >> Hi Daniel, thanks for your review and comments. We want to make a generic pci_host_bridge, >> which would hold the common host information, for example, pci domain is common info for >> pci host bridge, this series saved domain in pci_host_bridge, then we no need to >> extract out domain by pci_bus->sysdata by platform specific pci_domain_nr(). >> Also we store the sysdata in pci_host_bridge, and pci_bus_to_host() is the platform >> interface, I think use the common interface would be better. >> >>>> + >>>> + /* Get probe mode and perform scan */ >>>> + if (hose->dn && ppc_md.pci_probe_mode) >>>> + mode = ppc_md.pci_probe_mode(bus); >>>> + >>>> + pr_debug(" probe mode: %d\n", mode); >>>> + if (mode == PCI_PROBE_DEVTREE) >>>> + of_scan_bus(hose->dn, bus); >>>> + >>>> + if (mode == PCI_PROBE_NORMAL) { >>>> + pci_bus_update_busn_res_end(bus, 255); >>>> + hose->last_busno = pci_scan_child_bus(bus); >>>> + pci_bus_update_busn_res_end(bus, hose->last_busno); >>>> + } >>>> + >>>> + return pci_bus_child_max_busnr(bus); >>>> +} >>>> + >>> I'm having trouble convincing myself that this patch covers every >>> variation within our PCI implementations. In particular, there's a >>> stanza in of_scan_pci_bridge in kernel/pci_of_scan.c that's almost >>> identical to this function. Does that implementation need to be cleaned >>> up and replaced with this function too? >>> >> >> This is a pci_host_bridge_ops hook function, which would be called in >> PCI core, and after applied this series, we only need to call pci_scan_host_bridge() >> to scan pci devices, and this function is also extracted from the pcibios_scan_phb(), >> it's not the redundant code. >> >>> >>>> @@ -1641,9 +1655,9 @@ void pcibios_scan_phb(struct pci_controller *hose) >>>> ppc_md.pcibios_fixup_phb(hose); >>>> >>>> /* Configure PCI Express settings */ >>>> - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> + if (host->bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> struct pci_bus *child; >>>> - list_for_each_entry(child, &bus->children, node) >>>> + list_for_each_entry(child, &host->bus->children, node) >>>> pcie_bus_configure_settings(child); >>>> } >>>> } >>> Two things: Firstly, the function uses hose throughout, not host. >>> Secondly, you're not deleting the bus variable: what's the purpose of >>> this change? >> >> host is the common pci_host_bridge which is created by PCI core for pci host bridge driver, >> the hose is the platform data used in powerpc. The purpose of the patch/series is to simplify >> pci enumeration interface, and try to reduce the weak functions which were used to setup pci bus/devices >> during PCI enumeration. >> >>> >>> Regards, >>> Daniel >>> >> >> > -- Thanks! Yijing From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yijing Wang Date: Thu, 26 Mar 2015 01:17:10 +0000 Subject: Re: [PATCH v8 19/30] powerpc/pci: Use pci_scan_host_bridge() for simplicity Message-Id: <55135E16.6060909@huawei.com> List-Id: References: <1427168064-8657-1-git-send-email-wangyijing@huawei.com> <1427168064-8657-20-git-send-email-wangyijing@huawei.com> <1427241523.2685.18.camel@axtens.net> <551266DE.3030609@huawei.com> <1427321631.2575.3.camel@axtens.net> In-Reply-To: <1427321631.2575.3.camel@axtens.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Daniel Axtens Cc: Liviu Dudau , Rusty Russell , linux-ia64@vger.kernel.org, Arnd Bergmann , Marc Zyngier , linux-pci@vger.kernel.org, x86@kernel.org, linux-kernel@vger.kernel.org, "David S. Miller" , linuxppc-dev@lists.ozlabs.org, linux-m68k@vger.kernel.org, Tony Luck , Geert Uytterhoeven , linux-alpha@vger.kernel.org, Bjorn Helgaas , Russell King , Thomas Gleixner , Guan Xuetao , Yinghai Lu , Jiang Liu , linux-arm-kernel@lists.infradead.org On 2015/3/26 6:13, Daniel Axtens wrote: > Hi Yijing, > > I wasn't quite sure I understood your comments, so I was trying to apply > your patch series and test it, but patch 3 doesn't apply cleanly to > 4.0-rc5 or master. Can you respin the series? Hi Daniel, Could you pull the series from Bjorn's git tree ? The URL is https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git pci/enumeration-yw8 Thanks! Yijing. > > Thanks, > Daniel > > >> Hi Daniel, thanks for your review and comments. We want to make a generic pci_host_bridge, >> which would hold the common host information, for example, pci domain is common info for >> pci host bridge, this series saved domain in pci_host_bridge, then we no need to >> extract out domain by pci_bus->sysdata by platform specific pci_domain_nr(). >> Also we store the sysdata in pci_host_bridge, and pci_bus_to_host() is the platform >> interface, I think use the common interface would be better. >> >>>> + >>>> + /* Get probe mode and perform scan */ >>>> + if (hose->dn && ppc_md.pci_probe_mode) >>>> + mode = ppc_md.pci_probe_mode(bus); >>>> + >>>> + pr_debug(" probe mode: %d\n", mode); >>>> + if (mode = PCI_PROBE_DEVTREE) >>>> + of_scan_bus(hose->dn, bus); >>>> + >>>> + if (mode = PCI_PROBE_NORMAL) { >>>> + pci_bus_update_busn_res_end(bus, 255); >>>> + hose->last_busno = pci_scan_child_bus(bus); >>>> + pci_bus_update_busn_res_end(bus, hose->last_busno); >>>> + } >>>> + >>>> + return pci_bus_child_max_busnr(bus); >>>> +} >>>> + >>> I'm having trouble convincing myself that this patch covers every >>> variation within our PCI implementations. In particular, there's a >>> stanza in of_scan_pci_bridge in kernel/pci_of_scan.c that's almost >>> identical to this function. Does that implementation need to be cleaned >>> up and replaced with this function too? >>> >> >> This is a pci_host_bridge_ops hook function, which would be called in >> PCI core, and after applied this series, we only need to call pci_scan_host_bridge() >> to scan pci devices, and this function is also extracted from the pcibios_scan_phb(), >> it's not the redundant code. >> >>> >>>> @@ -1641,9 +1655,9 @@ void pcibios_scan_phb(struct pci_controller *hose) >>>> ppc_md.pcibios_fixup_phb(hose); >>>> >>>> /* Configure PCI Express settings */ >>>> - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> + if (host->bus && !pci_has_flag(PCI_PROBE_ONLY)) { >>>> struct pci_bus *child; >>>> - list_for_each_entry(child, &bus->children, node) >>>> + list_for_each_entry(child, &host->bus->children, node) >>>> pcie_bus_configure_settings(child); >>>> } >>>> } >>> Two things: Firstly, the function uses hose throughout, not host. >>> Secondly, you're not deleting the bus variable: what's the purpose of >>> this change? >> >> host is the common pci_host_bridge which is created by PCI core for pci host bridge driver, >> the hose is the platform data used in powerpc. The purpose of the patch/series is to simplify >> pci enumeration interface, and try to reduce the weak functions which were used to setup pci bus/devices >> during PCI enumeration. >> >>> >>> Regards, >>> Daniel >>> >> >> > -- Thanks! Yijing