Re: Cannot play videos using gstreamer

[Carlos Rafael Giani <dv@pseudoterminal.org>]

[-- Attachment #1: Type: text/plain, Size: 3579 bytes --]

Regarding (3) : you cannot use eglinfo-fb in your image, since you are 
using X11. Use eglinfo-x11 instead.


Am 2015-05-03 um 15:29 schrieb Isaac Nickaein:
>
> I was using Kernel 3.0.35 and that had issues. Issue #1 got fixed by 
> using a newer kernel (Kernel 3.16 image provided by Ka-Ro).
> However, the issue #2 and #3 are still present (I have problem with 
> using glimagesink; adding "eglinfo-fb" package in local.conf causes 
> compile error).
>
>
> On Sun, May 3, 2015 at 2:04 PM, Isaac Nickaein <nickaein.i@gmail.com 
> <mailto:nickaein.i@gmail.com>> wrote:
>
>     Hi,
>
>     I've repo synced my Yocto Dizzy and created a core-image-minimal
>     image. The local.conf is presented at the end of this email.
>
>     The problem is I cannot get any display output using GStreamer,
>     while my Qt program (which is built using toolchain by "bitbake
>     meta-toolchain-qte") have display output. What I have tried:
>
>     1. Using mfw_v4lsink:
>
>       gst-launch -v filesrc location=test.mp4 typefind=true !
>     aiurdemux ! queue ! vpudec ! mfw_v4lsink
>
>     doesn't fail, but does not show anything on the display. Here is
>     log output: http://pastebin.com/TWtNCViT
>
>     2. Using glimagesink:
>
>         gst-launch filesrc location=test.mp4 typefind=true ! aiurdemux
>     ! queue ! vpudec ! glimagesink
>
>     fails with the following output:
>
>         Setting pipeline to PAUSED ...
>         Caught SIGSEGV accessing address 0x4d0
>         exec gdb failed: No such file or directory
>         Spinning.  Please run 'gdb gst-launch 1405' to continue
>     debugging, Ctrl-C to quit, or Ctrl-\ to dump core.
>
>
>     3. I wondered adding "eglinfo-fb" recipe could be helpful (?), but
>     it caused a compile error during bitbake. Here is output:
>     http://pastebin.com/EQC464iM
>
>
>     And this is the local.conf that I am using:
>
>     MACHINE ??= 'imx6qsabresd'
>     DISTRO ?= 'poky'
>     PACKAGE_CLASSES ?= "package_rpm"
>     EXTRA_IMAGE_FEATURES = "debug-tweaks"
>     USER_CLASSES ?= "buildstats image-mklibs image-prelink"
>     PATCHRESOLVE = "noop"
>     BB_DISKMON_DIRS = "\
>         STOPTASKS,${TMPDIR},1G,100K \
>         STOPTASKS,${DL_DIR},1G,100K \
>         STOPTASKS,${SSTATE_DIR},1G,100K \
>         ABORT,${TMPDIR},100M,1K \
>         ABORT,${DL_DIR},100M,1K \
>         ABORT,${SSTATE_DIR},100M,1K"
>     PACKAGECONFIG_append_pn-qemu-native = " sdl"
>     PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
>     ASSUME_PROVIDED += "libsdl-native"
>     CONF_VERSION = "1"
>
>     BB_NUMBER_THREADS = '4'
>     PARALLEL_MAKE = '-j 4'
>
>     DL_DIR ?= "${BSPDIR}/downloads/"
>     ACCEPT_FSL_EULA = ""
>
>     KERNEL_IMAGETYPE_forcevariable = "uImage"
>
>     IMAGE_INSTALL_append = "\
>     wget \
>     nano \
>     fbida \
>     bash \
>     firmware-imx \
>     fsl-rc-local \
>     packagegroup-core-ssh-openssh \
>     mtd-utils \
>     nfs-utils \
>     iproute2 \
>     canutils \
>     libsocketcan \
>     fbset \
>     fbset-modes \
>     glib-2.0 \
>     libstdc++ \
>     gpu-viv-bin-mx6q \
>     libxdamage \
>     libxfixes \
>     libxext \
>     libx11 \
>     libxcb \
>     libxau \
>     libxdmcp \
>     ntp \
>     proftpd \
>     tzdata \
>     packagegroup-fsl-gstreamer \
>     gst-fsl-plugin \
>     gstreamer \
>     gst-plugins-bad \
>     imx-vpu \
>     gst-plugins-gl \
>     gst-plugins-base \
>     gst-plugins-gl-opengl \
>     v4l-utils \
>     "
>
>
>
>


[-- Attachment #2: Type: text/html, Size: 17575 bytes --]