From mboxrd@z Thu Jan  1 00:00:00 1970
From: Nikolay Dimitrov <picmaster@mail.bg>
Date: Mon, 18 May 2015 00:38:35 +0300
Subject: [U-Boot] [PATCH v2 2/2] mx: mx6: display max cpu frequency in
 print_cpuinfo()
In-Reply-To: <1431580121-24726-3-git-send-email-tharvey@gateworks.com>
References: <1431580121-24726-1-git-send-email-tharvey@gateworks.com>
 <1431580121-24726-3-git-send-email-tharvey@gateworks.com>
Message-ID: <55590A5B.1080305@mail.bg>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


On 05/14/2015 08:08 AM, Tim Harvey wrote:
> Display the max CPU frequency as well as the current running CPU frequency
> if the max CPU frequency is available and differs from the current CPU
> frequency.
>
> Before:
> CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
>
> After - using an 800MHz IMX6DL (running at its max)
> CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
>
> After - using a 1GHz IMX6Q (not running at its max):
> CPU:   Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz)
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> v2:
>   - split out from patch that obtains the max cpu freq
>   - add before/after example and more description of change
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
>   arch/arm/imx-common/cpu.c | 16 +++++++++++++++-
>   1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
> index 067d08f..6b20482 100644
> --- a/arch/arm/imx-common/cpu.c
> +++ b/arch/arm/imx-common/cpu.c
> @@ -142,7 +142,7 @@ const char *get_imx_type(u32 imxtype)
>
>   int print_cpuinfo(void)
>   {
> -	u32 cpurev;
> +	u32 cpurev, max_freq;
>
>   #if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL)
>   	struct udevice *thermal_dev;
> @@ -151,11 +151,25 @@ int print_cpuinfo(void)
>
>   	cpurev = get_cpu_rev();
>
> +#if defined(CONFIG_MX6)
> +	printf("CPU:   Freescale i.MX%s rev%d.%d",
> +	       get_imx_type((cpurev & 0xFF000) >> 12),
> +	       (cpurev & 0x000F0) >> 4,
> +	       (cpurev & 0x0000F) >> 0);
> +	max_freq = get_cpu_speed_grade_hz();
> +	if (!max_freq || max_freq == mxc_get_clock(MXC_ARM_CLK)) {
> +		printf(" at %dMHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);
> +	} else {
> +		printf(" %d MHz (running at %d MHz)\n", max_freq / 1000000,
> +		       mxc_get_clock(MXC_ARM_CLK) / 1000000);
> +	}
> +#else
>   	printf("CPU:   Freescale i.MX%s rev%d.%d at %d MHz\n",
>   		get_imx_type((cpurev & 0xFF000) >> 12),
>   		(cpurev & 0x000F0) >> 4,
>   		(cpurev & 0x0000F) >> 0,
>   		mxc_get_clock(MXC_ARM_CLK) / 1000000);
> +#endif
>
>   #if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL)
>   	ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev);
>

Tested-by: Nikolay Dimitrov <picmaster@mail.bg>

Regards,
Nikolay