From: Przemyslaw Marczak <p.marczak@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 11/55] exynos: dts: Sync up I2C ports with the kernel
Date: Fri, 10 Jul 2015 13:51:36 +0200 [thread overview]
Message-ID: <559FB1C8.6090508@samsung.com> (raw)
In-Reply-To: <1435882592-487-12-git-send-email-sjg@chromium.org>
Hello Simon,
On 07/03/2015 02:15 AM, Simon Glass wrote:
> The kernel uses upper case for I2C unit addresses. Follow the same
> convention to reduce differences.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> arch/arm/dts/exynos5.dtsi | 34 ++++++++++++++++-----------------
> arch/arm/dts/exynos5250-arndale.dts | 16 ++++++++--------
> arch/arm/dts/exynos5250-smdk5250.dts | 21 ++++++++++----------
> arch/arm/dts/exynos5250-snow.dts | 32 +++++++++++++++++--------------
> arch/arm/dts/exynos5250.dtsi | 24 +++++++++++------------
> arch/arm/dts/exynos5420-peach-pit.dts | 8 ++++----
> arch/arm/dts/exynos5420-smdk5420.dts | 4 ++--
> arch/arm/dts/exynos54xx.dtsi | 36 +++++++++++++++++------------------
> arch/arm/dts/exynos5800-peach-pi.dts | 8 ++++----
> 9 files changed, 94 insertions(+), 89 deletions(-)
>
> diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi
> index 238acb8..179584c 100644
> --- a/arch/arm/dts/exynos5.dtsi
> +++ b/arch/arm/dts/exynos5.dtsi
> @@ -72,39 +72,39 @@
> interrupts = <1 9 0xf04>;
> };
>
> - i2c at 12c60000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + i2c_0: i2c at 12C60000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C60000 0x100>;
> interrupts = <0 56 0>;
> - };
> -
> - i2c at 12c70000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_1: i2c at 12C70000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C70000 0x100>;
> interrupts = <0 57 0>;
> - };
> -
> - i2c at 12c80000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_2: i2c at 12C80000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C80000 0x100>;
> interrupts = <0 58 0>;
> - };
> -
> - i2c at 12c90000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_3: i2c at 12C90000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C90000 0x100>;
> interrupts = <0 59 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> };
>
> - spi at 12d20000 {
> + spi_0: spi at 12d20000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos-spi";
> @@ -112,7 +112,7 @@
> interrupts = <0 68 0>;
> };
>
> - spi at 12d30000 {
> + spi_1: spi at 12d30000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos-spi";
> @@ -120,7 +120,7 @@
> interrupts = <0 69 0>;
> };
>
> - spi at 12d40000 {
> + spi_2: spi at 12d40000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos-spi";
> @@ -129,7 +129,7 @@
> interrupts = <0 70 0>;
> };
>
> - spi at 131a0000 {
> + spi_3: spi at 131a0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos-spi";
> @@ -137,7 +137,7 @@
> interrupts = <0 129 0>;
> };
>
> - spi at 131b0000 {
> + spi_4: spi at 131b0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos-spi";
> diff --git a/arch/arm/dts/exynos5250-arndale.dts b/arch/arm/dts/exynos5250-arndale.dts
> index 21c0a21..031c622 100644
> --- a/arch/arm/dts/exynos5250-arndale.dts
> +++ b/arch/arm/dts/exynos5250-arndale.dts
> @@ -15,14 +15,14 @@
> compatible = "samsung,arndale", "samsung,exynos5250";
>
> aliases {
> - i2c0 = "/i2c at 12c60000";
> - i2c1 = "/i2c at 12c70000";
> - i2c2 = "/i2c at 12c80000";
> - i2c3 = "/i2c at 12c90000";
> - i2c4 = "/i2c at 12ca0000";
> - i2c5 = "/i2c at 12cb0000";
> - i2c6 = "/i2c at 12cc0000";
> - i2c7 = "/i2c at 12cd0000";
> + i2c0 = "/i2c at 12C60000";
> + i2c1 = "/i2c at 12C70000";
> + i2c2 = "/i2c at 12C80000";
> + i2c3 = "/i2c at 12C90000";
> + i2c4 = "/i2c at 12CA0000";
> + i2c5 = "/i2c at 12CB0000";
> + i2c6 = "/i2c at 12CC0000";
> + i2c7 = "/i2c at 12CD0000";
> serial0 = "/serial at 12C20000";
> console = "/serial at 12C20000";
> };
> diff --git a/arch/arm/dts/exynos5250-smdk5250.dts b/arch/arm/dts/exynos5250-smdk5250.dts
> index 3cebfc2..636fec9 100644
> --- a/arch/arm/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/dts/exynos5250-smdk5250.dts
> @@ -11,20 +11,21 @@
>
> /dts-v1/;
> #include "exynos5250.dtsi"
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> / {
> model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
> compatible = "samsung,smdk5250", "samsung,exynos5250";
>
> aliases {
> - i2c0 = "/i2c at 12c60000";
> - i2c1 = "/i2c at 12c70000";
> - i2c2 = "/i2c at 12c80000";
> - i2c3 = "/i2c at 12c90000";
> - i2c4 = "/i2c at 12ca0000";
> - i2c5 = "/i2c at 12cb0000";
> - i2c6 = "/i2c at 12cc0000";
> - i2c7 = "/i2c at 12cd0000";
> + i2c0 = "/i2c at 12C60000";
> + i2c1 = "/i2c at 12C70000";
> + i2c2 = "/i2c at 12C80000";
> + i2c3 = "/i2c at 12C90000";
> + i2c4 = "/i2c at 12CA0000";
> + i2c5 = "/i2c at 12CB0000";
> + i2c6 = "/i2c at 12CC0000";
> + i2c7 = "/i2c at 12CD0000";
> spi0 = "/spi at 12d20000";
> spi1 = "/spi at 12d30000";
> spi2 = "/spi at 12d40000";
> @@ -58,14 +59,14 @@
> status = "disabled";
> };
>
> - i2c at 12c70000 {
> + i2c at 12C70000 {
> soundcodec at 1a {
> reg = <0x1a>;
> compatible = "wolfson,wm8994-codec";
> };
> };
>
> - i2c at 12c60000 {
> + i2c at 12C60000 {
> pmic at 9 {
> reg = <0x9>;
> compatible = "maxim,max77686";
> diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
> index e4b3dc2..9abe0b7 100644
> --- a/arch/arm/dts/exynos5250-snow.dts
> +++ b/arch/arm/dts/exynos5250-snow.dts
> @@ -7,24 +7,27 @@
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 as
> * published by the Free Software Foundation.
> -*/
> + */
>
> /dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/input/input.h>
> #include "exynos5250.dtsi"
>
> / {
> model = "Google Snow";
> - compatible = "google,snow", "samsung,exynos5250";
> + compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
>
> aliases {
> - i2c0 = "/i2c at 12c60000";
> - i2c1 = "/i2c at 12c70000";
> - i2c2 = "/i2c at 12c80000";
> - i2c3 = "/i2c at 12c90000";
> - i2c4 = "/i2c at 12ca0000";
> - i2c5 = "/i2c at 12cb0000";
> - i2c6 = "/i2c at 12cc0000";
> - i2c7 = "/i2c at 12cd0000";
> + i2c0 = "/i2c at 12C60000";
> + i2c1 = "/i2c at 12C70000";
> + i2c2 = "/i2c at 12C80000";
> + i2c3 = "/i2c at 12C90000";
> + i2c4 = "/i2c at 12CA0000";
> + i2c5 = "/i2c at 12CB0000";
> + i2c6 = "/i2c at 12CC0000";
> + i2c7 = "/i2c at 12CD0000";
> spi0 = "/spi at 12d20000";
> spi1 = "/spi at 12d30000";
> spi2 = "/spi at 12d40000";
> @@ -39,7 +42,7 @@
> i2s = "/sound at 3830000";
> };
>
> - i2c4: i2c at 12ca0000 {
> + i2c4: i2c at 12CA0000 {
> cros_ec: cros-ec at 1e {
> reg = <0x1e>;
> compatible = "google,cros-ec-i2c";
> @@ -66,6 +69,7 @@
> spi-max-frequency = <1000000>;
> spi-deactivate-delay = <100>;
>
> + /* Snow did support SPI but the released version used I2C */
> embedded-controller {
> compatible = "google,cros-ec-i2c";
> reg = <0x1e>;
> @@ -85,7 +89,7 @@
> status = "disabled";
> };
>
> - i2c at 12cd0000 {
> + i2c at 12CD0000 {
> soundcodec at 22 {
> reg = <0x22>;
> compatible = "maxim,max98095-codec";
> @@ -105,8 +109,8 @@
> };
> };
>
> - i2c at 12c60000 {
> - pmic at 9 {
> + i2c at 12C60000 {
> + max77686 at 09 {
> reg = <0x9>;
> compatible = "maxim,max77686";
> };
> diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
> index ccbafe9..7eef3e3 100644
> --- a/arch/arm/dts/exynos5250.dtsi
> +++ b/arch/arm/dts/exynos5250.dtsi
> @@ -47,36 +47,36 @@
> interrupts = <0 47 0>;
> };
>
> - i2c at 12ca0000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + i2c_4: i2c at 12CA0000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12CA0000 0x100>;
> interrupts = <0 60 0>;
> - };
> -
> - i2c at 12cb0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_5: i2c at 12CB0000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12CB0000 0x100>;
> interrupts = <0 61 0>;
> - };
> -
> - i2c at 12cc0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_6: i2c at 12CC0000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12CC0000 0x100>;
> interrupts = <0 62 0>;
> - };
> -
> - i2c at 12cd0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> + };
> +
> + i2c_7: i2c at 12CD0000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12CD0000 0x100>;
> interrupts = <0 63 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> };
>
> sound at 3830000 {
> diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts
> index 6fe762d..0f1002e 100644
> --- a/arch/arm/dts/exynos5420-peach-pit.dts
> +++ b/arch/arm/dts/exynos5420-peach-pit.dts
> @@ -25,7 +25,7 @@
> aliases {
> serial0 = "/serial at 12C30000";
> console = "/serial at 12C30000";
> - pmic = "/i2c at 12ca0000";
> + pmic = "/i2c at 12CA0000";
> };
>
> dmc {
> @@ -49,7 +49,7 @@
> };
>
> /* MAX77802 is on i2c bus 4 */
> - i2c at 12ca0000 {
> + i2c at 12CA0000 {
> clock-frequency = <400000>;
> power-regulator at 9 {
> compatible = "maxim,max77802-pmic";
> @@ -57,7 +57,7 @@
> };
> };
>
> - i2c at 12cd0000 { /* i2c7 */
> + i2c at 12CD0000 { /* i2c7 */
> clock-frequency = <100000>;
> soundcodec at 20 {
> reg = <0x20>;
> @@ -76,7 +76,7 @@
> samsung,codec-type = "max98090";
> };
>
> - i2c at 12e10000 { /* i2c9 */
> + i2c at 12E10000 { /* i2c9 */
> clock-frequency = <400000>;
> tpm at 20 {
> compatible = "infineon,slb9645tt";
> diff --git a/arch/arm/dts/exynos5420-smdk5420.dts b/arch/arm/dts/exynos5420-smdk5420.dts
> index 6855027..015ff15 100644
> --- a/arch/arm/dts/exynos5420-smdk5420.dts
> +++ b/arch/arm/dts/exynos5420-smdk5420.dts
> @@ -37,7 +37,7 @@
> };
>
> /* s2mps11 is on i2c bus 4 */
> - i2c at 12ca0000 {
> + i2c at 12CA0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> pmic at 66 {
> @@ -82,7 +82,7 @@
> samsung,codec-type = "wm8994";
> };
>
> - i2c at 12c70000 {
> + i2c at 12C70000 {
> soundcodec at 1a {
> reg = <0x1a>;
> compatible = "wolfson,wm8994-codec";
> diff --git a/arch/arm/dts/exynos54xx.dtsi b/arch/arm/dts/exynos54xx.dtsi
> index 31fabb1..bd3619d 100644
> --- a/arch/arm/dts/exynos54xx.dtsi
> +++ b/arch/arm/dts/exynos54xx.dtsi
> @@ -14,17 +14,17 @@
> };
>
> aliases {
> - i2c0 = "/i2c at 12c60000";
> - i2c1 = "/i2c at 12c70000";
> - i2c2 = "/i2c at 12c80000";
> - i2c3 = "/i2c at 12c90000";
> - i2c4 = "/i2c at 12ca0000";
> - i2c5 = "/i2c at 12cb0000";
> - i2c6 = "/i2c at 12cc0000";
> - i2c7 = "/i2c at 12cd0000";
> - i2c8 = "/i2c at 12e00000";
> - i2c9 = "/i2c at 12e10000";
> - i2c10 = "/i2c at 12e20000";
> + i2c0 = "/i2c at 12C60000";
> + i2c1 = "/i2c at 12C70000";
> + i2c2 = "/i2c at 12C80000";
> + i2c3 = "/i2c at 12C90000";
> + i2c4 = "/i2c at 12CA0000";
> + i2c5 = "/i2c at 12CB0000";
> + i2c6 = "/i2c at 12CC0000";
> + i2c7 = "/i2c at 12CD0000";
> + i2c8 = "/i2c at 12E00000";
> + i2c9 = "/i2c at 12E10000";
> + i2c10 = "/i2c at 12E20000";
> pinctrl0 = &pinctrl_0;
> pinctrl1 = &pinctrl_1;
> pinctrl2 = &pinctrl_2;
> @@ -42,7 +42,7 @@
> xhci1 = "/xhci at 12400000";
> };
>
> - i2c at 12ca0000 {
> + i2c at 12CA0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -50,7 +50,7 @@
> interrupts = <0 60 0>;
> };
>
> - i2c at 12cb0000 {
> + i2c at 12CB0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -58,7 +58,7 @@
> interrupts = <0 61 0>;
> };
>
> - i2c at 12cc0000 {
> + i2c at 12CC0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -66,7 +66,7 @@
> interrupts = <0 62 0>;
> };
>
> - i2c at 12cd0000 {
> + i2c at 12CD0000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -74,7 +74,7 @@
> interrupts = <0 63 0>;
> };
>
> - i2c at 12e00000 {
> + i2c at 12E00000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -82,7 +82,7 @@
> interrupts = <0 87 0>;
> };
>
> - i2c at 12e10000 {
> + i2c at 12E10000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> @@ -90,7 +90,7 @@
> interrupts = <0 88 0>;
> };
>
> - i2c at 12e20000 {
> + i2c at 12E20000 {
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "samsung,exynos5-hsi2c";
> diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts
> index 176ce55..4e548f7 100644
> --- a/arch/arm/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/dts/exynos5800-peach-pi.dts
> @@ -25,7 +25,7 @@
> aliases {
> serial0 = "/serial at 12C30000";
> console = "/serial at 12C30000";
> - pmic = "/i2c at 12ca0000";
> + pmic = "/i2c at 12CA0000";
> };
>
> dmc {
> @@ -49,7 +49,7 @@
> };
>
> /* MAX77802 is on i2c bus 4 */
> - i2c at 12ca0000 {
> + i2c at 12CA0000 {
> clock-frequency = <400000>;
> power-regulator at 9 {
> compatible = "maxim,max77802-pmic";
> @@ -57,7 +57,7 @@
> };
> };
>
> - i2c at 12cd0000 { /* i2c7 */
> + i2c at 12CD0000 { /* i2c7 */
> clock-frequency = <100000>;
> soundcodec at 20 {
> reg = <0x20>;
> @@ -69,7 +69,7 @@
> samsung,codec-type = "max98090";
> };
>
> - i2c at 12e10000 { /* i2c9 */
> + i2c at 12E10000 { /* i2c9 */
> clock-frequency = <400000>;
> tpm at 20 {
> compatible = "infineon,slb9645tt";
>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
Best regards
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
next prev parent reply other threads:[~2015-07-10 11:51 UTC|newest]
Thread overview: 139+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-03 0:15 [U-Boot] [PATCH 00/55] dm: exynos: Driver model improvements leading to spring support Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 01/55] dm: core: Support finding a device by phandle Simon Glass
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 02/55] dm: i2c: Add a message debug function Simon Glass
2015-07-03 6:52 ` Heiko Schocher denx
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 03/55] dm: i2c: Correct comment nits in dm_i2c_reg_read/write() Simon Glass
2015-07-03 6:53 ` Heiko Schocher denx
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 04/55] dm: i2c: Move definitions to the top of the header file Simon Glass
2015-07-03 6:55 ` Heiko Schocher denx
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 05/55] dm: i2c: Add a function to transfer messages Simon Glass
2015-07-03 6:58 ` Heiko Schocher denx
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 06/55] dm: i2c: Add support for multiplexed I2C buses Simon Glass
2015-07-05 6:10 ` Heiko Schocher
2015-07-06 16:38 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 07/55] exynos: i2c: Correct bug in pinmux selection Simon Glass
2015-07-05 6:15 ` Heiko Schocher
2015-07-06 15:27 ` Simon Glass
2015-07-07 1:36 ` Minkyu Kang
2015-07-08 2:38 ` Simon Glass
2015-07-10 1:43 ` Minkyu Kang
2015-07-10 1:46 ` Simon Glass
2015-07-10 8:56 ` Przemyslaw Marczak
2015-07-10 12:14 ` Minkyu Kang
2015-07-07 6:51 ` Przemyslaw Marczak
2015-07-03 0:15 ` [U-Boot] [PATCH 08/55] i2c: Add a mux for GPIO-based I2C bus arbitration Simon Glass
2015-07-05 6:43 ` Heiko Schocher
2015-07-06 16:38 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 09/55] exynos: i2c: Fix code style with ReadWriteByte() Simon Glass
2015-07-05 6:45 ` Heiko Schocher
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 10/55] exynos: i2c: Tidy up the driver model code Simon Glass
2015-07-06 5:40 ` Heiko Schocher
2015-07-27 23:28 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 11/55] exynos: dts: Sync up I2C ports with the kernel Simon Glass
2015-07-10 11:51 ` Przemyslaw Marczak [this message]
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 12/55] exynos: dts: Add PMIC and regulator definitions Simon Glass
2015-07-10 11:51 ` Przemyslaw Marczak
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 13/55] exynos: dts: Support EC tunnel and main TPS65090 regulator Simon Glass
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 14/55] dm: cros_ec: Convert the I2C tunnel code to use driver model Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 15/55] cros_ec: Support the LDO access method used by spring Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 16/55] exynos: serial: Refactor init code for debug UART Simon Glass
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 17/55] exynos: Add debug UART support for Samsung S5P serial Simon Glass
2015-07-27 23:29 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 18/55] exynos: Enable the debug UART in SPL Simon Glass
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 19/55] dm: gpio: Add support for setting a GPIO's pull direction Simon Glass
2015-07-05 4:55 ` Masahiro Yamada
2015-07-06 16:39 ` Simon Glass
2015-07-06 17:20 ` Masahiro Yamada
2015-07-06 17:33 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 20/55] dm: exynos: gpio: Support pull-up/down in GPIOs Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 21/55] dm: power: Add a new driver for the TPS65090 PMIC Simon Glass
2015-07-10 11:52 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:15 ` [U-Boot] [PATCH 22/55] dm: power: Add support for TPS65090 FETs Simon Glass
2015-07-10 11:52 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 23/55] dm: power: Add support for the S5M8767 PMIC Simon Glass
2015-07-10 11:52 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 24/55] dm: power: Add support for S5M8767 regulators Simon Glass
2015-07-10 11:52 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 25/55] dm: pmic: max77686: Correct a few nits Simon Glass
2015-07-10 11:53 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-28 6:19 ` Przemyslaw Marczak
2015-08-03 14:02 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 26/55] dm: pmic: Correct the pmic_reg_write() implementation Simon Glass
2015-07-10 11:53 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 27/55] dm: power: max77686: Correct BUCK register access Simon Glass
2015-07-10 11:53 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 28/55] dm: pmic: max77686: Support all BUCK regulators Simon Glass
2015-07-10 11:53 ` Przemyslaw Marczak
2015-07-30 2:05 ` Simon Glass
2015-07-30 8:22 ` Przemyslaw Marczak
2015-08-03 14:05 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 29/55] dm: power: Don't return an error when regulators are not autoset Simon Glass
2015-07-10 11:54 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 30/55] dm: pmic: Display the regulator limits on error Simon Glass
2015-07-10 11:54 ` Przemyslaw Marczak
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 31/55] dm: video: Add support for video bridges Simon Glass
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 32/55] dm: video: Add support for the Parade PS8622/625 bridge Simon Glass
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 33/55] dm: video: Add support for the NXP PTN3460 bridge Simon Glass
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 34/55] exynos: spi: Convert the timeout to debug() Simon Glass
2015-07-27 23:30 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 35/55] exynos: Correct return value in exynos_mmc_init() Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 36/55] exynos: Add support for the DisplayPort hotplug detect Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 37/55] exynos: video: Correct debug output Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 38/55] exynos: Tidy up CPU frequency display Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 39/55] dm: gpio: Check a GPIO is valid before using it Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 40/55] dts: exynos: snow: Add memory layout description Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 41/55] dts: exynos: pit: Add a new node for the parade video bridge driver Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 42/55] dts: exynos: snow: Add a new node for the NXP " Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 43/55] exynos: dts: Drop the old TPS65090 I2C node Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 44/55] exynos: Add common board code for exynos5 boards that use device tree Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 45/55] exynos: Enable new features for exynos5 boards Simon Glass
2015-07-10 11:55 ` Przemyslaw Marczak
2015-07-28 16:29 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 46/55] exynos: Remove unneeded device tree control #ifdefs Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 47/55] exynos: config: Move common options to the common headers and tidy up Simon Glass
2015-07-10 11:56 ` Przemyslaw Marczak
2015-07-03 0:16 ` [U-Boot] [PATCH 48/55] exynos: Drop old exynos5420-specific board code Simon Glass
2015-07-10 11:56 ` Przemyslaw Marczak
2015-07-03 0:16 ` [U-Boot] [PATCH 49/55] exynos: Drop old exynos5250-specific " Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 50/55] power: Remove old TPS65090 drivers Simon Glass
2015-07-10 11:56 ` Przemyslaw Marczak
2015-07-03 0:16 ` [U-Boot] [PATCH 51/55] cros_ec: Remove the old tunnel code Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 52/55] video: Remove the old parade driver Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 53/55] dts: Drop unused compatible ID for the NXP video bridge Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 54/55] exynos: video: Remove non-device-tree code Simon Glass
2015-07-03 0:16 ` [U-Boot] [PATCH 55/55] exynos: Add support for spring Simon Glass
2015-07-20 14:19 ` [U-Boot] [PATCH 00/55] dm: exynos: Driver model improvements leading to spring support Simon Glass
2015-07-22 4:52 ` Minkyu Kang
2015-07-23 2:08 ` Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559FB1C8.6090508@samsung.com \
--to=p.marczak@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.