All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Kettenis <mark.kettenis@xs4all.nl>
To: Rob Herring <robh@kernel.org>
Cc: kettenis@openbsd.org, devicetree@vger.kernel.org,
	marcan@marcan.st, linus.walleij@linaro.org,
	linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl
Date: Mon, 10 May 2021 19:06:10 +0200 (CEST)	[thread overview]
Message-ID: <5612be5a12568600@bloch.sibelius.xs4all.nl> (raw)
In-Reply-To: <20210510141955.GA58072@robh.at.kernel.org> (message from Rob Herring on Mon, 10 May 2021 09:19:55 -0500)

> Date: Mon, 10 May 2021 09:19:55 -0500
> From: Rob Herring <robh@kernel.org>

Hi Rob,

> On Sat, May 08, 2021 at 04:19:55PM +0200, Mark Kettenis wrote:
> > The Apple GPIO controller is a simple combined pin and GPIO conroller
> > present on Apple ARM SoC platforms, including various iPhone and iPad
> > devices and the "Apple Silicon" Macs.
> > 
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  .../bindings/pinctrl/apple,pinctrl.yaml       | 103 ++++++++++++++++++
> >  MAINTAINERS                                   |   2 +
> >  include/dt-bindings/pinctrl/apple.h           |  13 +++
> >  3 files changed, 118 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> > 
> > diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> > new file mode 100644
> > index 000000000000..cc7805ca6ba1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> > @@ -0,0 +1,103 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Apple GPIO controller
> > +
> > +maintainers:
> > +  - Mark Kettenis <kettenis@openbsd.org>
> > +
> > +description: |
> > +  The Apple GPIO controller is a simple combined pin and GPIO conroller
> > +  present on Apple ARM SoC platforms, including various iPhone and iPad
> > +  devices and the "Apple Silicon" Macs.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: apple,t8103-pinctrl
> > +      - const: apple,pinctrl
> 
> A genericish fallback is maybe questionable for pinctrl. That's not 
> often the same from one SoC to the next.

Krzysztof raised a similar point.  It seems that Apple isn't in the
habit of changing this aspect of their SoCs.  Judging from

  https://github.com/corellium/linux-sandcastle/blob/sandcastle-5.4/drivers/pinctrl/pinctrl-hx-gpio.c

Apple has been using a controller with the same register layout and
the same known bits in those registers since the T8010 SoC (the A10
used in the iPhone 7).  So there is some confidence that a single
driver will work for many generations of the SoC.  Of course we don't
have any authoritative documentaton on these SoCs so I can't be 100%
sure that there aren't any subtle differences in the behaviour of the
hardware.  That's why I also include a more specific compatible for
the T8103 SoC (the M1 used in the current Macs).

> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  gpio-controller: true
> > +
> > +  '#gpio-cells':
> > +    const: 2
> > +
> > +  gpio-ranges:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 7
> > +
> > +  interrupt-controller: true
> > +
> > +patternProperties:
> > +  '-pins$':
> > +    type: object
> > +    $ref: pinmux-node.yaml#
> > +
> > +    properties:
> > +      pinmux:
> > +        description:
> > +          Values are constructed from pin number and alternate function
> > +          configuration number using the APPLE_PINMUX() helper macro
> > +          defined in include/dt-bindings/pinctrl/apple.h.
> > +
> > +    required:
> > +      - pinmux
> > +
> > +    additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - gpio-controller
> > +  - '#gpio-cells'
> > +  - gpio-ranges
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/apple-aic.h>
> > +    #include <dt-bindings/pinctrl/apple.h>
> > +
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +
> > +      pinctrl: pinctrl@23c100000 {
> > +        compatible = "apple,t8103-pinctrl", "apple,pinctrl";
> > +        reg = <0x2 0x3c100000 0x0 0x100000>;
> > +        clocks = <&gpio_clk>;
> > +
> > +        gpio-controller;
> > +        #gpio-cells = <2>;
> > +        gpio-ranges = <&pinctrl 0 0 212>;
> > +
> > +        interrupt-controller;
> > +        interrupt-parent = <&aic>;
> > +        interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +        pcie_pins: pcie-pins {
> > +          pinmux = <APPLE_PINMUX(150, 1)>,
> > +                   <APPLE_PINMUX(151, 1)>,
> > +                   <APPLE_PINMUX(32, 1)>;
> > +        };
> > +      };
> > +    };
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index ad0e9be66885..7327c9b778f1 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1654,9 +1654,11 @@ C:	irc://chat.freenode.net/asahi-dev
> >  T:	git https://github.com/AsahiLinux/linux.git
> >  F:	Documentation/devicetree/bindings/arm/apple.yaml
> >  F:	Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
> > +F:	Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> >  F:	arch/arm64/boot/dts/apple/
> >  F:	drivers/irqchip/irq-apple-aic.c
> >  F:	include/dt-bindings/interrupt-controller/apple-aic.h
> > +F:	include/dt-bindings/pinctrl/apple.h
> >  
> >  ARM/ARTPEC MACHINE SUPPORT
> >  M:	Jesper Nilsson <jesper.nilsson@axis.com>
> > diff --git a/include/dt-bindings/pinctrl/apple.h b/include/dt-bindings/pinctrl/apple.h
> > new file mode 100644
> > index 000000000000..ea0a6f466592
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/apple.h
> > @@ -0,0 +1,13 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
> > +/*
> > + * This header provides constants for Apple pinctrl bindings.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_APPLE_H
> > +#define _DT_BINDINGS_PINCTRL_APPLE_H
> > +
> > +#define APPLE_PINMUX(pin, func) ((pin) | ((func) << 16))
> > +#define APPLE_PIN(pinmux) ((pinmux) & 0xffff)
> > +#define APPLE_FUNC(pinmux) ((pinmux) >> 16)
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_APPLE_H */
> > -- 
> > 2.31.1
> > 
> 

WARNING: multiple messages have this Message-ID (diff)
From: Mark Kettenis <mark.kettenis@xs4all.nl>
To: Rob Herring <robh@kernel.org>
Cc: kettenis@openbsd.org, devicetree@vger.kernel.org,
	marcan@marcan.st, linus.walleij@linaro.org,
	linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl
Date: Mon, 10 May 2021 19:06:10 +0200 (CEST)	[thread overview]
Message-ID: <5612be5a12568600@bloch.sibelius.xs4all.nl> (raw)
In-Reply-To: <20210510141955.GA58072@robh.at.kernel.org> (message from Rob Herring on Mon, 10 May 2021 09:19:55 -0500)

> Date: Mon, 10 May 2021 09:19:55 -0500
> From: Rob Herring <robh@kernel.org>

Hi Rob,

> On Sat, May 08, 2021 at 04:19:55PM +0200, Mark Kettenis wrote:
> > The Apple GPIO controller is a simple combined pin and GPIO conroller
> > present on Apple ARM SoC platforms, including various iPhone and iPad
> > devices and the "Apple Silicon" Macs.
> > 
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  .../bindings/pinctrl/apple,pinctrl.yaml       | 103 ++++++++++++++++++
> >  MAINTAINERS                                   |   2 +
> >  include/dt-bindings/pinctrl/apple.h           |  13 +++
> >  3 files changed, 118 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> >  create mode 100644 include/dt-bindings/pinctrl/apple.h
> > 
> > diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> > new file mode 100644
> > index 000000000000..cc7805ca6ba1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> > @@ -0,0 +1,103 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Apple GPIO controller
> > +
> > +maintainers:
> > +  - Mark Kettenis <kettenis@openbsd.org>
> > +
> > +description: |
> > +  The Apple GPIO controller is a simple combined pin and GPIO conroller
> > +  present on Apple ARM SoC platforms, including various iPhone and iPad
> > +  devices and the "Apple Silicon" Macs.
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: apple,t8103-pinctrl
> > +      - const: apple,pinctrl
> 
> A genericish fallback is maybe questionable for pinctrl. That's not 
> often the same from one SoC to the next.

Krzysztof raised a similar point.  It seems that Apple isn't in the
habit of changing this aspect of their SoCs.  Judging from

  https://github.com/corellium/linux-sandcastle/blob/sandcastle-5.4/drivers/pinctrl/pinctrl-hx-gpio.c

Apple has been using a controller with the same register layout and
the same known bits in those registers since the T8010 SoC (the A10
used in the iPhone 7).  So there is some confidence that a single
driver will work for many generations of the SoC.  Of course we don't
have any authoritative documentaton on these SoCs so I can't be 100%
sure that there aren't any subtle differences in the behaviour of the
hardware.  That's why I also include a more specific compatible for
the T8103 SoC (the M1 used in the current Macs).

> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  gpio-controller: true
> > +
> > +  '#gpio-cells':
> > +    const: 2
> > +
> > +  gpio-ranges:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 7
> > +
> > +  interrupt-controller: true
> > +
> > +patternProperties:
> > +  '-pins$':
> > +    type: object
> > +    $ref: pinmux-node.yaml#
> > +
> > +    properties:
> > +      pinmux:
> > +        description:
> > +          Values are constructed from pin number and alternate function
> > +          configuration number using the APPLE_PINMUX() helper macro
> > +          defined in include/dt-bindings/pinctrl/apple.h.
> > +
> > +    required:
> > +      - pinmux
> > +
> > +    additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - gpio-controller
> > +  - '#gpio-cells'
> > +  - gpio-ranges
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/apple-aic.h>
> > +    #include <dt-bindings/pinctrl/apple.h>
> > +
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +
> > +      pinctrl: pinctrl@23c100000 {
> > +        compatible = "apple,t8103-pinctrl", "apple,pinctrl";
> > +        reg = <0x2 0x3c100000 0x0 0x100000>;
> > +        clocks = <&gpio_clk>;
> > +
> > +        gpio-controller;
> > +        #gpio-cells = <2>;
> > +        gpio-ranges = <&pinctrl 0 0 212>;
> > +
> > +        interrupt-controller;
> > +        interrupt-parent = <&aic>;
> > +        interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +        pcie_pins: pcie-pins {
> > +          pinmux = <APPLE_PINMUX(150, 1)>,
> > +                   <APPLE_PINMUX(151, 1)>,
> > +                   <APPLE_PINMUX(32, 1)>;
> > +        };
> > +      };
> > +    };
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index ad0e9be66885..7327c9b778f1 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1654,9 +1654,11 @@ C:	irc://chat.freenode.net/asahi-dev
> >  T:	git https://github.com/AsahiLinux/linux.git
> >  F:	Documentation/devicetree/bindings/arm/apple.yaml
> >  F:	Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
> > +F:	Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> >  F:	arch/arm64/boot/dts/apple/
> >  F:	drivers/irqchip/irq-apple-aic.c
> >  F:	include/dt-bindings/interrupt-controller/apple-aic.h
> > +F:	include/dt-bindings/pinctrl/apple.h
> >  
> >  ARM/ARTPEC MACHINE SUPPORT
> >  M:	Jesper Nilsson <jesper.nilsson@axis.com>
> > diff --git a/include/dt-bindings/pinctrl/apple.h b/include/dt-bindings/pinctrl/apple.h
> > new file mode 100644
> > index 000000000000..ea0a6f466592
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/apple.h
> > @@ -0,0 +1,13 @@
> > +/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
> > +/*
> > + * This header provides constants for Apple pinctrl bindings.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_APPLE_H
> > +#define _DT_BINDINGS_PINCTRL_APPLE_H
> > +
> > +#define APPLE_PINMUX(pin, func) ((pin) | ((func) << 16))
> > +#define APPLE_PIN(pinmux) ((pinmux) & 0xffff)
> > +#define APPLE_FUNC(pinmux) ((pinmux) >> 16)
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_APPLE_H */
> > -- 
> > 2.31.1
> > 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-05-10 17:06 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-08 14:19 [PATCH 0/2] Apple M1 pinctrl DT bindings Mark Kettenis
2021-05-08 14:19 ` Mark Kettenis
2021-05-08 14:19 ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Mark Kettenis
2021-05-08 14:19   ` Mark Kettenis
2021-05-08 21:09   ` Linus Walleij
2021-05-08 21:09     ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Linus Walleij
2021-05-08 23:02     ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Mark Kettenis
2021-05-08 23:02       ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Mark Kettenis
2021-05-09  0:27       ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Linus Walleij
2021-05-09  0:27         ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Linus Walleij
2021-05-09  9:50         ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Tomasz Figa
2021-05-09  9:50           ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Tomasz Figa
2021-05-10 13:09           ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Krzysztof Kozlowski
2021-05-10 13:09             ` Krzysztof Kozlowski
2021-05-09  0:18   ` Linus Walleij
2021-05-09  0:18     ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Linus Walleij
2021-05-09  9:46     ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Mark Kettenis
2021-05-09  9:46       ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Mark Kettenis
2021-05-09 10:49       ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Linus Walleij
2021-05-09 10:49         ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Linus Walleij
2021-05-10 13:03   ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Krzysztof Kozlowski
2021-05-10 13:03     ` Krzysztof Kozlowski
2021-05-10 17:09     ` Mark Kettenis
2021-05-10 17:09       ` Mark Kettenis
2021-05-10 14:01   ` Rob Herring
2021-05-10 14:01     ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Rob Herring
2021-05-10 18:18     ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Rob Herring
2021-05-10 18:18       ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Rob Herring
2021-05-10 14:19   ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Rob Herring
2021-05-10 14:19     ` Rob Herring
2021-05-10 17:06     ` Mark Kettenis [this message]
2021-05-10 17:06       ` Mark Kettenis
2021-05-19 23:27       ` Linus Walleij
2021-05-19 23:27         ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Linus Walleij
2021-05-20 11:22         ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple,pinctrl Mark Kettenis
2021-05-20 11:22           ` [PATCH 1/2] dt-bindings: pinctrl: Add DT bindings for apple, pinctrl Mark Kettenis
2021-05-08 14:19 ` [PATCH 2/2] arm64: apple: Add pinctrl nodes Mark Kettenis
2021-05-08 14:19   ` Mark Kettenis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5612be5a12568600@bloch.sibelius.xs4all.nl \
    --to=mark.kettenis@xs4all.nl \
    --cc=devicetree@vger.kernel.org \
    --cc=kettenis@openbsd.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.