From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 15 Oct 2015 10:13:16 +0200 Subject: [U-Boot] [PATCH] mtd: nand: vf610_nfc: resync with upstream Linux version In-Reply-To: <1444881617.5185.235.camel@freescale.com> References: <1444799502-20472-1-git-send-email-stefan@agner.ch> <20151014132141.088492da@lilith> <20151014132709.05bdc347@lilith> <1444881617.5185.235.camel@freescale.com> Message-ID: <561F601C.9040901@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 15/10/2015 06:00, Scott Wood wrote: > On Wed, 2015-10-14 at 13:27 +0200, Albert ARIBAUD wrote: >> On Wed, 14 Oct 2015 13:21:41 +0200, Albert ARIBAUD (3ADEV) >> wrote: >>> Hello Stefan, >>> >>> On Tue, 13 Oct 2015 22:11:42 -0700, Stefan Agner >>> wrote: >>>> This resyncs the driver changes with the Linux version of the >>>> driver. The driver received some feedback in the LKML and got >>>> recently acceppted, the latest version can be found here: >>>> https://lkml.org/lkml/2015/9/2/678 >>>> >>>> Notable changes are: >>>> - On ECC error, reread OOB and count bit flips in OOB too. >>>> If flipped bits are below threshold, also return an empty >>>> OOB buffer. >>>> - Return the amount of bit flips in vf610_nfc_read_page. >>>> - Use endianness aware vf610_nfc_read to read ECC status. >>>> - Do not enable IDLE IRQ (since we do not operate with an >>>> interrupt service routine). >>>> - Use type safe struct for buffer variants (vf610_nfc_alt_buf). >>>> - Renamed variables in struct vf610_nfc (column and page_sz) >>>> to reflect better what they really representing. >>>> >>>> The U-Boot version currently does not support RAW NAND write >>>> when using the HW ECC engine. >>>> >>>> Signed-off-by: Bhuvanchandra DV >>>> Signed-off-by: Stefan Agner >>> >>> Tested-by: Albert ARIBAUD (3ADEV) >> >> Putting Stefano Babic in To: list since this is IMX-like stuff. >> >> Stefano, >> >> I can pick this plus Stefan's other two and Anthony's vf610-related >> patches if you want, or you can. Either way, Tom will take them as they >> are essentially bugfixes. > > Acked-by: Scott Wood > Thanks Scott. I am picking this one and a couple of other patches and I will send my PR to Tom. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================