[U-Boot] u-boot device model SPI + SPI Flash

From: Michal Simek <michal.simek@xilinx.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] u-boot device model SPI + SPI Flash
Date: Tue, 27 Oct 2015 12:37:14 +0100	[thread overview]
Message-ID: <562F61EA.5080303@xilinx.com> (raw)
In-Reply-To: <e77df993647b4bff99afe0afc65370de@LysExc01.nanotronic.local>

On 10/27/2015 12:12 PM, Hoefle Marco wrote:
> 
> 
>> -----Original Message-----
>> From: Michal Simek [mailto:michal.simek at xilinx.com]
>> Sent: Montag, 26. Oktober 2015 14:52
>> To: Jagan Teki <jteki@openedev.com>; Hoefle Marco
>> <Marco.Hoefle@nanotronic.ch>; Michal Simek <michal.simek@xilinx.com>
>> Cc: u-boot at lists.denx.de
>> Subject: Re: [U-Boot] u-boot device model SPI + SPI Flash
>>
>> On 10/23/2015 12:20 PM, Jagan Teki wrote:
>>> On 23 October 2015 at 15:42, Hoefle Marco <Marco.Hoefle@nanotronic.ch>
>> wrote:
>>>> Maybe somebody has a valid u-boot dts file for a microblaze system with
>> an SPI core? That would helpful.
>>>> We want to move from a parallel nor flash to a SPI flash for FPGA config,
>> u-boot, Linux Kernel and rootfs.
>>>> The last missing part is u-boot. The kernel dts file is ok and the mtd
>> partitions are set up correctly.
>>>
>>> I even grepped on linux/arch/microblaze couldn't get much info, So
>>> added Michal he well aware of this may be he can help.
>>
>>
>> http://www.xilinx.com/support/download/index.html/content/xilinx/en/do
>> wnloadNav/embedded-design-tools/2015-2.html
>>
>> ac701 bsp and I expect also Kc705.
> 
> I downloaded the AC701 bsp file but it is not a valid archive. Do I need to use  (and learn how to use) the 3 GB pertalinux tools to build u-boot for Microblaze?
> The u-boot config for the AC701 and the dts file would probably sufficient.

it is tar.gz just rename it.

Thanks,
Michal