All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 00/13] Add mipi dsi support for rk3288
@ 2015-10-31 12:55 ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:55 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, Arnd Bergmann, Thierry Reding, Takashi Iwai,
	Philipp Zabel, Kumar Gala, dri-devel, Ian Campbell, Rob Herring,
	Antony Pavlov, David Airlie, Jeff Chen, Thierry Reding,
	linux-clk, Alexandru M Stan, Sonny Rao, Kever Yang,
	Arnaud Ebalard, Huang Lin, Inki Dae, Pawel Moll,
	Jonathan Cameron, devicetree, Michael Turquette, Stephen Boyd,
	Vincent Palatin, Kuninori Morimoto, Russell King, Ajay Kumar,
	linux-arm-kernel, Russell King, Liu Ying, Doug Anderson,
	linux-kernel, Mark Yao, David S. Miller, Andy Yan, Mark Rutland,
	Roger Chen

The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM bridge driver and a rockchip MIPI DSI specific DRM
driver.

This series also includes a DRM panel driver for BOE TV080WUM-NL0 panel.
This panel only use the MIPI DSI video mode.

The MIPI DSI feature is tested on rk3288 evb board, backport them to
chrome os kernel v3.14, and it can display normally.

This patchset is base on the patchset from Ying.liu@freescale.com.
<http://www.spinics.net/lists/dri-devel/msg77181.html>


Changes in v2:
add the mipi clk id in a single patch
add vendor prefix for boe
As Thierry.Reding comment, add a documentation for this panel.

Chris Zhong (11):
  clk: rockchip: add id for mipidsi sclk on rk3288
  clk: rockchip: add mipidsi clocks on rk3288
  drm/rockchip: return a true clock rate to adjusted_mode
  drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
  drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
  Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  ARM: dts: rockchip: add rk3288 mipi_dsi nodes
  of: add vendor prefix for boe
  drm/panel: simple: Add support for BOE TV080WUM-NL0
  drm/panel: simple: Add simple panel device tree binding
  ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb

Liu Ying (2):
  drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
  Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM
    bridge driver

 .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt |   76 ++
 .../devicetree/bindings/panel/boe,tv080wum-nl0.txt |    7 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 .../bindings/video/dw_mipi_dsi_rockchip.txt        |   56 ++
 arch/arm/boot/dts/rk3288-evb.dtsi                  |   20 +-
 arch/arm/boot/dts/rk3288.dtsi                      |   39 +
 drivers/clk/rockchip/clk-rk3288.c                  |    2 +-
 drivers/gpu/drm/bridge/Kconfig                     |    9 +
 drivers/gpu/drm/bridge/Makefile                    |    1 +
 drivers/gpu/drm/bridge/dw_mipi_dsi.c               | 1055 ++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c               |   33 +
 drivers/gpu/drm/rockchip/Kconfig                   |   10 +
 drivers/gpu/drm/rockchip/Makefile                  |    1 +
 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c    |  249 +++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c        |    9 +
 include/drm/bridge/dw_mipi_dsi.h                   |   27 +
 include/drm/drm_mipi_dsi.h                         |   14 +
 include/dt-bindings/clock/rk3288-cru.h             |    1 +
 18 files changed, 1608 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
 create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
 create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
 create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
 create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
 create mode 100644 include/drm/bridge/dw_mipi_dsi.h

-- 
2.6.2


^ permalink raw reply	[flat|nested] 35+ messages in thread

* [PATCH v2 00/13] Add mipi dsi support for rk3288
@ 2015-10-31 12:55 ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:55 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, Arnd Bergmann, Thierry Reding, Takashi Iwai,
	Philipp Zabel, Kumar Gala, dri-devel, Ian Campbell, Rob Herring,
	Antony Pavlov, David Airlie, Jeff Chen, Thierry Reding,
	linux-clk, Alexandru M Stan, Sonny Rao, Kever Yang,
	Arnaud Ebalard, Huang Lin, Inki Dae, Pawel Moll,
	Jonathan Cameron, devicetree, Michael Turquette, Stephen Boyd

The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM bridge driver and a rockchip MIPI DSI specific DRM
driver.

This series also includes a DRM panel driver for BOE TV080WUM-NL0 panel.
This panel only use the MIPI DSI video mode.

The MIPI DSI feature is tested on rk3288 evb board, backport them to
chrome os kernel v3.14, and it can display normally.

This patchset is base on the patchset from Ying.liu@freescale.com.
<http://www.spinics.net/lists/dri-devel/msg77181.html>


Changes in v2:
add the mipi clk id in a single patch
add vendor prefix for boe
As Thierry.Reding comment, add a documentation for this panel.

Chris Zhong (11):
  clk: rockchip: add id for mipidsi sclk on rk3288
  clk: rockchip: add mipidsi clocks on rk3288
  drm/rockchip: return a true clock rate to adjusted_mode
  drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
  drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
  Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  ARM: dts: rockchip: add rk3288 mipi_dsi nodes
  of: add vendor prefix for boe
  drm/panel: simple: Add support for BOE TV080WUM-NL0
  drm/panel: simple: Add simple panel device tree binding
  ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb

Liu Ying (2):
  drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
  Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM
    bridge driver

 .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt |   76 ++
 .../devicetree/bindings/panel/boe,tv080wum-nl0.txt |    7 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 .../bindings/video/dw_mipi_dsi_rockchip.txt        |   56 ++
 arch/arm/boot/dts/rk3288-evb.dtsi                  |   20 +-
 arch/arm/boot/dts/rk3288.dtsi                      |   39 +
 drivers/clk/rockchip/clk-rk3288.c                  |    2 +-
 drivers/gpu/drm/bridge/Kconfig                     |    9 +
 drivers/gpu/drm/bridge/Makefile                    |    1 +
 drivers/gpu/drm/bridge/dw_mipi_dsi.c               | 1055 ++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c               |   33 +
 drivers/gpu/drm/rockchip/Kconfig                   |   10 +
 drivers/gpu/drm/rockchip/Makefile                  |    1 +
 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c    |  249 +++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c        |    9 +
 include/drm/bridge/dw_mipi_dsi.h                   |   27 +
 include/drm/drm_mipi_dsi.h                         |   14 +
 include/dt-bindings/clock/rk3288-cru.h             |    1 +
 18 files changed, 1608 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
 create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
 create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
 create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
 create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
 create mode 100644 include/drm/bridge/dw_mipi_dsi.h

-- 
2.6.2


^ permalink raw reply	[flat|nested] 35+ messages in thread

* [PATCH v2 00/13] Add mipi dsi support for rk3288
@ 2015-10-31 12:55 ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:55 UTC (permalink / raw)
  To: linux-arm-kernel

The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM bridge driver and a rockchip MIPI DSI specific DRM
driver.

This series also includes a DRM panel driver for BOE TV080WUM-NL0 panel.
This panel only use the MIPI DSI video mode.

The MIPI DSI feature is tested on rk3288 evb board, backport them to
chrome os kernel v3.14, and it can display normally.

This patchset is base on the patchset from Ying.liu at freescale.com.
<http://www.spinics.net/lists/dri-devel/msg77181.html>


Changes in v2:
add the mipi clk id in a single patch
add vendor prefix for boe
As Thierry.Reding comment, add a documentation for this panel.

Chris Zhong (11):
  clk: rockchip: add id for mipidsi sclk on rk3288
  clk: rockchip: add mipidsi clocks on rk3288
  drm/rockchip: return a true clock rate to adjusted_mode
  drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
  drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
  Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  ARM: dts: rockchip: add rk3288 mipi_dsi nodes
  of: add vendor prefix for boe
  drm/panel: simple: Add support for BOE TV080WUM-NL0
  drm/panel: simple: Add simple panel device tree binding
  ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb

Liu Ying (2):
  drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
  Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM
    bridge driver

 .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt |   76 ++
 .../devicetree/bindings/panel/boe,tv080wum-nl0.txt |    7 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 .../bindings/video/dw_mipi_dsi_rockchip.txt        |   56 ++
 arch/arm/boot/dts/rk3288-evb.dtsi                  |   20 +-
 arch/arm/boot/dts/rk3288.dtsi                      |   39 +
 drivers/clk/rockchip/clk-rk3288.c                  |    2 +-
 drivers/gpu/drm/bridge/Kconfig                     |    9 +
 drivers/gpu/drm/bridge/Makefile                    |    1 +
 drivers/gpu/drm/bridge/dw_mipi_dsi.c               | 1055 ++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c               |   33 +
 drivers/gpu/drm/rockchip/Kconfig                   |   10 +
 drivers/gpu/drm/rockchip/Makefile                  |    1 +
 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c    |  249 +++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c        |    9 +
 include/drm/bridge/dw_mipi_dsi.h                   |   27 +
 include/drm/drm_mipi_dsi.h                         |   14 +
 include/dt-bindings/clock/rk3288-cru.h             |    1 +
 18 files changed, 1608 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
 create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
 create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
 create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
 create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
 create mode 100644 include/drm/bridge/dw_mipi_dsi.h

-- 
2.6.2

^ permalink raw reply	[flat|nested] 35+ messages in thread

* [PATCH v2 01/13] clk: rockchip: add id for mipidsi sclk on rk3288
  2015-10-31 12:55 ` Chris Zhong
  (?)
  (?)
@ 2015-10-31 12:55 ` Chris Zhong
  -1 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:55 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, devicetree, Alexandru M Stan, linux-kernel,
	Kever Yang, Doug Anderson, Kumar Gala, David S. Miller,
	Ian Campbell, Sonny Rao, Rob Herring, Pawel Moll, Jeff Chen,
	Mark Rutland, Huang Lin, Roger Chen

Adds a new id for the sclk supplying the mipidsi on rk3288 socs.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

Changes in v2:
add the mipi clk id in a single patch

 include/dt-bindings/clock/rk3288-cru.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
index c719aac..b07cdd3 100644
--- a/include/dt-bindings/clock/rk3288-cru.h
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -86,6 +86,7 @@
 #define SCLK_USBPHY480M_SRC	122
 #define SCLK_PVTM_CORE		123
 #define SCLK_PVTM_GPU		124
+#define SCLK_MIPI_24M		125
 
 #define SCLK_MAC		151
 #define SCLK_MACREF_OUT		152
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 02/13] clk: rockchip: add mipidsi clocks on rk3288
  2015-10-31 12:55 ` Chris Zhong
@ 2015-10-31 12:55   ` Chris Zhong
  -1 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:55 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, Michael Turquette, Stephen Boyd, linux-kernel,
	linux-clk, linux-arm-kernel

sclk_mipidsi_24m is the gating of mipi dsi phy.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 drivers/clk/rockchip/clk-rk3288.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 9040878..c7d7ebf 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -709,7 +709,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	GATE(SCLK_LCDC_PWM1, "sclk_lcdc_pwm1", "xin24m", 0, RK3288_CLKGATE_CON(13), 11, GFLAGS),
 	GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK3288_CLKGATE_CON(5), 9, GFLAGS),
 	GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK3288_CLKGATE_CON(5), 10, GFLAGS),
-	GATE(0, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
+	GATE(SCLK_MIPI_24M, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
 
 	/* sclk_gpu gates */
 	GATE(ACLK_GPU, "aclk_gpu", "sclk_gpu", 0, RK3288_CLKGATE_CON(18), 0, GFLAGS),
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 02/13] clk: rockchip: add mipidsi clocks on rk3288
@ 2015-10-31 12:55   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:55 UTC (permalink / raw)
  To: linux-arm-kernel

sclk_mipidsi_24m is the gating of mipi dsi phy.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 drivers/clk/rockchip/clk-rk3288.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 9040878..c7d7ebf 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -709,7 +709,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	GATE(SCLK_LCDC_PWM1, "sclk_lcdc_pwm1", "xin24m", 0, RK3288_CLKGATE_CON(13), 11, GFLAGS),
 	GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK3288_CLKGATE_CON(5), 9, GFLAGS),
 	GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK3288_CLKGATE_CON(5), 10, GFLAGS),
-	GATE(0, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
+	GATE(SCLK_MIPI_24M, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
 
 	/* sclk_gpu gates */
 	GATE(ACLK_GPU, "aclk_gpu", "sclk_gpu", 0, RK3288_CLKGATE_CON(18), 0, GFLAGS),
-- 
2.6.2

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 03/13] drm/rockchip: return a true clock rate to adjusted_mode
  2015-10-31 12:55 ` Chris Zhong
@ 2015-10-31 12:55   ` Chris Zhong
  -1 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:55 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, Mark Yao, linux-kernel, dri-devel, David Airlie,
	linux-arm-kernel

Sometimes the clock driver can not set a accurate clock_rate for vop,
get the true rate of vop_dclk and set it back to adjusted_mode, since
the mipi dsi driver need to use the clock to make the calculation of
Blanking.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 5d8ae5e..9986b311ed 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1232,6 +1232,12 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
 	reset_control_deassert(vop->dclk_rst);
 
 	clk_set_rate(vop->dclk, adjusted_mode->clock * 1000);
+
+	/*
+	 * Sometimes the clock driver can not set a accurate clock_rate for vop,
+	 * get the true rate of vop_dclk and set it back to adjusted_mode.
+	 */
+	adjusted_mode->clock = clk_get_rate(vop->dclk) / 1000;
 out:
 	ret_clk = clk_enable(vop->dclk);
 	if (ret_clk < 0) {
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 03/13] drm/rockchip: return a true clock rate to adjusted_mode
@ 2015-10-31 12:55   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:55 UTC (permalink / raw)
  To: linux-arm-kernel

Sometimes the clock driver can not set a accurate clock_rate for vop,
get the true rate of vop_dclk and set it back to adjusted_mode, since
the mipi dsi driver need to use the clock to make the calculation of
Blanking.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 5d8ae5e..9986b311ed 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1232,6 +1232,12 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
 	reset_control_deassert(vop->dclk_rst);
 
 	clk_set_rate(vop->dclk, adjusted_mode->clock * 1000);
+
+	/*
+	 * Sometimes the clock driver can not set a accurate clock_rate for vop,
+	 * get the true rate of vop_dclk and set it back to adjusted_mode.
+	 */
+	adjusted_mode->clock = clk_get_rate(vop->dclk) / 1000;
 out:
 	ret_clk = clk_enable(vop->dclk);
 	if (ret_clk < 0) {
-- 
2.6.2

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 04/13] drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
@ 2015-10-31 12:56   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Liu Ying, Liu Ying, Chris Zhong, David Airlie, dri-devel, linux-kernel

From: Liu Ying <Ying.liu@freescale.com>

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 include/drm/drm_mipi_dsi.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index f1d8d0d..3662021 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -163,6 +163,20 @@ static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
 	return container_of(dev, struct mipi_dsi_device, dev);
 }
 
+static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
+{
+	switch (fmt) {
+	case MIPI_DSI_FMT_RGB888:
+	case MIPI_DSI_FMT_RGB666:
+		return 24;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		return 18;
+	case MIPI_DSI_FMT_RGB565:
+		return 16;
+	}
+	return -EINVAL;
+}
+
 struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
 int mipi_dsi_attach(struct mipi_dsi_device *dsi);
 int mipi_dsi_detach(struct mipi_dsi_device *dsi);
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 04/13] drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
@ 2015-10-31 12:56   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko-4mtYJXux2i+zQB+pC5nmwQ,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
  Cc: Chris Zhong, David Airlie, Liu Ying,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW

From: Liu Ying <Ying.liu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>

Signed-off-by: Liu Ying <Ying.Liu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Acked-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---

Changes in v2: None

 include/drm/drm_mipi_dsi.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index f1d8d0d..3662021 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -163,6 +163,20 @@ static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
 	return container_of(dev, struct mipi_dsi_device, dev);
 }
 
+static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
+{
+	switch (fmt) {
+	case MIPI_DSI_FMT_RGB888:
+	case MIPI_DSI_FMT_RGB666:
+		return 24;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		return 18;
+	case MIPI_DSI_FMT_RGB565:
+		return 16;
+	}
+	return -EINVAL;
+}
+
 struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
 int mipi_dsi_attach(struct mipi_dsi_device *dsi);
 int mipi_dsi_detach(struct mipi_dsi_device *dsi);
-- 
2.6.2

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver
  2015-10-31 12:55 ` Chris Zhong
                   ` (5 preceding siblings ...)
  (?)
@ 2015-10-31 12:56 ` Chris Zhong
  2015-11-06  2:21     ` Rob Herring
  -1 siblings, 1 reply; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Liu Ying, Liu Ying, Chris Zhong, devicetree, Kumar Gala,
	linux-kernel, Ian Campbell, Rob Herring, Pawel Moll,
	Mark Rutland

From: Liu Ying <Ying.liu@freescale.com>

This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
host controller DRM bridge driver.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt | 76 ++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt

diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
new file mode 100644
index 0000000..bb87466
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
@@ -0,0 +1,76 @@
+Device-Tree bindings for Synopsys DesignWare MIPI DSI host controller
+
+The controller is a digital core that implements all protocol functions
+defined in the MIPI DSI specification, providing an interface between
+the system and the MIPI DPHY, and allowing communication with a MIPI DSI
+compliant display.
+
+Required properties:
+ - #address-cells: Should be <1>.
+ - #size-cells: Should be <0>.
+ - compatible: The first compatible string should be "fsl,imx6q-mipi-dsi"
+   for i.MX6q/sdl SoCs.  For other SoCs, please refer to their specific
+   device tree binding documentations.  A common compatible string
+   "snps,dw-mipi-dsi" should be appended for all SoCs.
+ - reg: Represent the physical address range of the controller.
+ - interrupts: Represent the controller's interrupt to the CPU(s).
+ - clocks, clock-names: Phandles to the controller's pll reference
+   clock(ref), configuration clock(cfg) and APB clock(pclk), as
+   described in [1].
+
+For more required properties, please refer to relevant device tree binding
+documentations which describe the controller embedded in specific SoCs.
+
+Required sub-nodes:
+ - A node to represent a DSI peripheral as described in [2].
+
+For more required sub-nodes, please refer to relevant device tree binding
+documentations which describe the controller embedded in specific SoCs.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
+
+example:
+	gpr: iomuxc-gpr@020e0000 {
+		/* ... */
+	};
+
+	mipi_dsi: mipi@021e0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x021e0000 0x4000>;
+		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+		gpr = <&gpr>;
+		clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+			 <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+			 <&clks IMX6QDL_CLK_MIPI_IPG>;
+		clock-names = "ref", "cfg", "pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_mipi>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				mipi_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_mipi>;
+				};
+			};
+		};
+
+		panel {
+			compatible = "truly,tft480800-16-e-dsi";
+			reg = <0>;
+			/* ... */
+		};
+	};
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
  2015-10-31 12:55 ` Chris Zhong
                   ` (6 preceding siblings ...)
  (?)
@ 2015-10-31 12:56 ` Chris Zhong
  -1 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, Russell King, Vincent Palatin, Thierry Reding,
	Takashi Iwai, Philipp Zabel, linux-kernel, dri-devel, Inki Dae,
	Andy Yan, David Airlie, Ajay Kumar

add Synopsys DesignWare MIPI DSI host controller driver support.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 drivers/gpu/drm/bridge/Kconfig       |    9 +
 drivers/gpu/drm/bridge/Makefile      |    1 +
 drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1055 ++++++++++++++++++++++++++++++++++
 include/drm/bridge/dw_mipi_dsi.h     |   27 +
 4 files changed, 1092 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
 create mode 100644 include/drm/bridge/dw_mipi_dsi.h

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 6dddd39..d6bde0d 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -22,6 +22,15 @@ config DRM_DW_HDMI_AHB_AUDIO
 	  Designware HDMI block.  This is used in conjunction with
 	  the i.MX6 HDMI driver.
 
+config DRM_DW_MIPI_DSI
+	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
+	depends on DRM
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL
+	---help---
+	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
+	  controller bridge.
 
 config DRM_NXP_PTN3460
 	tristate "NXP PTN3460 DP/LVDS bridge"
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index d4e28be..d908c4b 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -2,5 +2,6 @@ ccflags-y := -Iinclude/drm
 
 obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
 obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o
+obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw_mipi_dsi.o
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
diff --git a/drivers/gpu/drm/bridge/dw_mipi_dsi.c b/drivers/gpu/drm/bridge/dw_mipi_dsi.c
new file mode 100644
index 0000000..442fc7c
--- /dev/null
+++ b/drivers/gpu/drm/bridge/dw_mipi_dsi.c
@@ -0,0 +1,1055 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <video/mipi_display.h>
+
+#define DSI_VERSION			0x00
+
+#define DSI_PWR_UP			0x04
+#define RESET				0
+#define POWERUP				BIT(0)
+
+#define DSI_CLKMGR_CFG			0x08
+#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
+
+#define DSI_DPI_VCID			0x0c
+#define DPI_VID(vid)			(((vid) & 0x3) << 0)
+
+#define DSI_DPI_COLOR_CODING		0x10
+#define EN18_LOOSELY			BIT(8)
+#define DPI_COLOR_CODING_16BIT_1	0x0
+#define DPI_COLOR_CODING_16BIT_2	0x1
+#define DPI_COLOR_CODING_16BIT_3	0x2
+#define DPI_COLOR_CODING_18BIT_1	0x3
+#define DPI_COLOR_CODING_18BIT_2	0x4
+#define DPI_COLOR_CODING_24BIT		0x5
+
+#define DSI_DPI_CFG_POL			0x14
+#define COLORM_ACTIVE_LOW		BIT(4)
+#define SHUTD_ACTIVE_LOW		BIT(3)
+#define HSYNC_ACTIVE_LOW		BIT(2)
+#define VSYNC_ACTIVE_LOW		BIT(1)
+#define DATAEN_ACTIVE_LOW		BIT(0)
+
+#define DSI_DPI_LP_CMD_TIM		0x18
+#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
+#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
+
+#define DSI_DBI_CFG			0x20
+#define DSI_DBI_CMDSIZE			0x28
+
+#define DSI_PCKHDL_CFG			0x2c
+#define EN_CRC_RX			BIT(4)
+#define EN_ECC_RX			BIT(3)
+#define EN_BTA				BIT(2)
+#define EN_EOTP_RX			BIT(1)
+#define EN_EOTP_TX			BIT(0)
+
+#define DSI_MODE_CFG			0x34
+#define ENABLE_VIDEO_MODE		0
+#define ENABLE_CMD_MODE			BIT(0)
+
+#define DSI_VID_MODE_CFG		0x38
+#define FRAME_BTA_ACK			BIT(14)
+#define ENABLE_LOW_POWER		(0x3f << 8)
+#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
+#define VID_MODE_TYPE_BURST_SYNC_PULSES		0x2
+#define VID_MODE_TYPE_MASK			0x3
+
+#define DSI_VID_PKT_SIZE		0x3c
+#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
+#define VID_PKT_MAX_SIZE		0x3fff
+
+#define DSI_VID_HSA_TIME		0x48
+#define DSI_VID_HBP_TIME		0x4c
+#define DSI_VID_HLINE_TIME		0x50
+#define DSI_VID_VSA_LINES		0x54
+#define DSI_VID_VBP_LINES		0x58
+#define DSI_VID_VFP_LINES		0x5c
+#define DSI_VID_VACTIVE_LINES		0x60
+#define DSI_CMD_MODE_CFG		0x68
+#define MAX_RD_PKT_SIZE_LP		BIT(24)
+#define DCS_LW_TX_LP			BIT(19)
+#define DCS_SR_0P_TX_LP			BIT(18)
+#define DCS_SW_1P_TX_LP			BIT(17)
+#define DCS_SW_0P_TX_LP			BIT(16)
+#define GEN_LW_TX_LP			BIT(14)
+#define GEN_SR_2P_TX_LP			BIT(13)
+#define GEN_SR_1P_TX_LP			BIT(12)
+#define GEN_SR_0P_TX_LP			BIT(11)
+#define GEN_SW_2P_TX_LP			BIT(10)
+#define GEN_SW_1P_TX_LP			BIT(9)
+#define GEN_SW_0P_TX_LP			BIT(8)
+#define EN_ACK_RQST			BIT(1)
+#define EN_TEAR_FX			BIT(0)
+
+#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
+					 DCS_LW_TX_LP | \
+					 DCS_SR_0P_TX_LP | \
+					 DCS_SW_1P_TX_LP | \
+					 DCS_SW_0P_TX_LP | \
+					 GEN_LW_TX_LP | \
+					 GEN_SR_2P_TX_LP | \
+					 GEN_SR_1P_TX_LP | \
+					 GEN_SR_0P_TX_LP | \
+					 GEN_SW_2P_TX_LP | \
+					 GEN_SW_1P_TX_LP | \
+					 GEN_SW_0P_TX_LP)
+
+#define DSI_GEN_HDR			0x6c
+#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
+#define GEN_HDATA_MASK			(0xffff << 8)
+#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
+#define GEN_HTYPE_MASK			0xff
+
+#define DSI_GEN_PLD_DATA		0x70
+
+#define DSI_CMD_PKT_STATUS		0x74
+#define GEN_CMD_EMPTY			BIT(0)
+#define GEN_CMD_FULL			BIT(1)
+#define GEN_PLD_W_EMPTY			BIT(2)
+#define GEN_PLD_W_FULL			BIT(3)
+#define GEN_PLD_R_EMPTY			BIT(4)
+#define GEN_PLD_R_FULL			BIT(5)
+#define GEN_RD_CMD_BUSY			BIT(6)
+
+#define DSI_TO_CNT_CFG			0x78
+#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
+#define LPRX_TO_CNT(p)			((p) & 0xffff)
+
+#define DSI_BTA_TO_CNT			0x8c
+
+#define DSI_LPCLK_CTRL			0x94
+#define AUTO_CLKLANE_CTRL		BIT(1)
+#define PHY_TXREQUESTCLKHS		BIT(0)
+
+#define DSI_PHY_TMR_LPCLK_CFG		0x98
+#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
+#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
+
+#define DSI_PHY_TMR_CFG			0x9c
+#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
+#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
+#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
+
+#define DSI_PHY_RSTZ			0xa0
+#define PHY_DISFORCEPLL			0
+#define PHY_ENFORCEPLL			BIT(3)
+#define PHY_DISABLECLK			0
+#define PHY_ENABLECLK			BIT(2)
+#define PHY_RSTZ			0
+#define PHY_UNRSTZ			BIT(1)
+#define PHY_SHUTDOWNZ			0
+#define PHY_UNSHUTDOWNZ			BIT(0)
+
+#define DSI_PHY_IF_CFG			0xa4
+#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
+#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
+
+#define DSI_PHY_STATUS			0xb0
+#define LOCK				BIT(0)
+#define STOP_STATE_CLK_LANE		BIT(2)
+
+#define DSI_PHY_TST_CTRL0		0xb4
+#define PHY_TESTCLK			BIT(1)
+#define PHY_UNTESTCLK			0
+#define PHY_TESTCLR			BIT(0)
+#define PHY_UNTESTCLR			0
+
+#define DSI_PHY_TST_CTRL1		0xb8
+#define PHY_TESTEN			BIT(16)
+#define PHY_UNTESTEN			0
+#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
+#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
+
+#define DSI_INT_ST0			0xbc
+#define DSI_INT_ST1			0xc0
+#define DSI_INT_MSK0			0xc4
+#define DSI_INT_MSK1			0xc8
+
+#define PHY_STATUS_TIMEOUT		10
+#define CMD_PKT_STATUS_TIMEOUT		20
+
+struct dw_mipi_dsi {
+	struct mipi_dsi_host dsi_host;
+	struct drm_connector connector;
+	struct drm_encoder *encoder;
+	struct drm_bridge *bridge;
+	struct drm_panel *panel;
+	struct device *dev;
+
+	void __iomem *base;
+
+	struct clk *pllref_clk;
+	struct clk *cfg_clk;
+	struct clk *pclk;
+
+	unsigned int lane_mbps; /* per lane */
+	u32 channel;
+	u32 lanes;
+	u32 format;
+	u16 input_div;
+	u16 feedback_div;
+	struct drm_display_mode *mode;
+
+	const struct dw_mipi_dsi_plat_data *pdata;
+
+	bool enabled;
+};
+
+enum {
+	STATUS_TO_CLEAR,
+	STATUS_TO_SET,
+};
+
+enum dw_mipi_dsi_mode {
+	DW_MIPI_DSI_CMD_MODE,
+	DW_MIPI_DSI_VID_MODE,
+};
+
+struct dphy_pll_testdin_map {
+	unsigned int max_mbps;
+	u8 testdin;
+};
+
+/* The table is based on 27MHz DPHY pll reference clock. */
+static const struct dphy_pll_testdin_map dptdin_map[] = {
+	{90, 0x00}, {100, 0x10}, {110, 0x20}, {130, 0x01},
+	{140, 0x11}, {150, 0x21}, {170, 0x02}, {180, 0x12},
+	{200, 0x22}, {220, 0x03}, {240, 0x13}, {250, 0x23},
+	{270, 0x04}, {300, 0x14}, {330, 0x05}, {360, 0x15},
+	{400, 0x25}, {450, 0x06}, {500, 0x16}, {550, 0x07},
+	{600, 0x17}, {650, 0x08}, {700, 0x18}, {750, 0x09},
+	{800, 0x19}, {850, 0x29}, {900, 0x39}, {950, 0x0a},
+	{1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
+	{1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
+	{1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
+};
+
+static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
+{
+	return container_of(host, struct dw_mipi_dsi, dsi_host);
+}
+
+static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
+{
+	return container_of(con, struct dw_mipi_dsi, connector);
+}
+
+int dw_mipi_dsi_get_encoder_pixel_format(struct drm_encoder *encoder)
+{
+	struct dw_mipi_dsi *dsi = encoder->bridge->driver_private;
+
+	return dsi->format;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_get_encoder_pixel_format);
+
+static int max_mbps_to_testdin(unsigned int max_mbps)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
+		if (dptdin_map[i].max_mbps > max_mbps)
+			return dptdin_map[i].testdin;
+
+	return -EINVAL;
+}
+
+static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
+{
+	writel(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
+{
+	return readl(dsi->base + reg);
+}
+
+static inline void dsi_modify(struct dw_mipi_dsi *dsi, u32 reg,
+			      u32 mask, u32 val)
+{
+	u32 v;
+
+	v = readl(dsi->base + reg);
+	v &= ~mask;
+	v |= val;
+	writel(v, dsi->base + reg);
+}
+
+static int check_status(struct dw_mipi_dsi *dsi, u32 reg, u32 status,
+			unsigned int timeout, bool to_set)
+{
+	unsigned long expire;
+	bool out;
+	u32 val;
+
+	expire = jiffies + msecs_to_jiffies(timeout);
+	for (;;) {
+		val = dsi_read(dsi, reg);
+		out = to_set ? ((val & status) == status) : !(val & status);
+		if (out)
+			break;
+
+		if (time_after(jiffies, expire))
+			return -ETIMEDOUT;
+
+		cpu_relax();
+	}
+
+	return 0;
+}
+
+/*
+ * The controller should generate 2 frames before
+ * preparing the peripheral.
+ */
+static void dw_mipi_dsi_wait_for_two_frames(struct dw_mipi_dsi *dsi)
+{
+	unsigned long expire;
+	int refresh, two_frames;
+
+	refresh = drm_mode_vrefresh(dsi->mode);
+	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
+
+	expire = jiffies + msecs_to_jiffies(two_frames);
+	while (time_before(jiffies, expire))
+		cpu_relax();
+}
+
+static void dw_mipi_dsi_phy_test(struct dw_mipi_dsi *dsi, u8 test_code,
+				 u8 test_data)
+{
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+
+	dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
+					  PHY_TESTDIN(test_code));
+
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+
+	dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
+					  PHY_TESTDIN(test_data));
+
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
+	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+}
+
+static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
+{
+	int ret, testdin, vco;
+
+	vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
+
+	testdin = max_mbps_to_testdin(dsi->lane_mbps);
+	if (testdin < 0) {
+		dev_err(dsi->dev,
+			"failed to get testdin for %dmbps lane clock\n",
+			dsi->lane_mbps);
+		return testdin;
+	}
+
+	dsi_write(dsi, DSI_PWR_UP, POWERUP);
+
+	dw_mipi_dsi_phy_test(dsi, 0x10, 0x80 | (vco & 0x7) << 3 | 0x3);
+	dw_mipi_dsi_phy_test(dsi, 0x11, 0x8);
+	dw_mipi_dsi_phy_test(dsi, 0x12, 0xc0);
+
+	dw_mipi_dsi_phy_test(dsi, 0x44, testdin << 1);
+
+	dw_mipi_dsi_phy_test(dsi, 0x17, dsi->input_div - 1);
+	dw_mipi_dsi_phy_test(dsi, 0x18, (dsi->feedback_div - 1) & 0x1f);
+	dw_mipi_dsi_phy_test(dsi, 0x18, (dsi->feedback_div - 1) >> 5 | 0x80);
+	dw_mipi_dsi_phy_test(dsi, 0x19, 0x30);
+
+	dw_mipi_dsi_phy_test(dsi, 0x20, 0x4d);
+	dw_mipi_dsi_phy_test(dsi, 0x21, 0x3d);
+	dw_mipi_dsi_phy_test(dsi, 0x21, 0xdf);
+	dw_mipi_dsi_phy_test(dsi, 0x22, 0x7);
+	dw_mipi_dsi_phy_test(dsi, 0x22, 0x87);
+	dw_mipi_dsi_phy_test(dsi, 0x70, 0x80 | 0xf);
+	dw_mipi_dsi_phy_test(dsi, 0x71, 0x80 | 0x55);
+	dw_mipi_dsi_phy_test(dsi, 0x72, 0x40 | 0xa);
+
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK
+		  | PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
+
+	ret = check_status(dsi, DSI_PHY_STATUS, LOCK,
+			   PHY_STATUS_TIMEOUT, STATUS_TO_SET);
+	if (ret < 0) {
+		dev_err(dsi->dev, "failed to wait for phy lock state\n");
+		return ret;
+	}
+	ret = check_status(dsi, DSI_PHY_STATUS, STOP_STATE_CLK_LANE,
+			   PHY_STATUS_TIMEOUT, STATUS_TO_SET);
+	if (ret < 0) {
+		dev_err(dsi->dev,
+			"failed to wait for phy clk lane stop state\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi)
+{
+	int bpp, i;
+	unsigned int max_mbps = 0, target_mbps = 1000;
+	unsigned long mpclk, pllref, tmp;
+	int m = 1, n = 1, pre;
+
+	for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) {
+		if (max_mbps < dptdin_map[i].max_mbps)
+			max_mbps = dptdin_map[i].max_mbps;
+	}
+
+	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+	if (bpp < 0) {
+		dev_err(dsi->dev, "failed to get bpp for pixel format %d\n",
+			dsi->format);
+		return bpp;
+	}
+
+	mpclk = DIV_ROUND_UP(dsi->mode->clock, MSEC_PER_SEC);
+	if (mpclk) {
+		/* take 1 / 0.9, since mbps must big than bandwidth of RGB */
+		tmp = mpclk * (bpp / dsi->lanes) * 10 / 9;
+		if (tmp < max_mbps)
+			target_mbps = tmp;
+		else
+			dev_err(dsi->dev, "DPHY clock frequency is out of range\n");
+	}
+
+	pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC);
+	tmp = pllref;
+
+	for (i = 1; i < 6; i++) {
+		pre = pllref / i;
+		if ((tmp > (target_mbps % pre)) && (target_mbps / pre < 512)) {
+			tmp = target_mbps % pre;
+			n = i;
+			m = target_mbps / pre;
+		}
+		if (tmp == 0)
+			break;
+	}
+
+	dsi->lane_mbps = pllref / n * m;
+	dsi->input_div = n;
+	dsi->feedback_div = m;
+
+	return 0;
+}
+
+static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+	if (device->lanes > dsi->pdata->max_data_lanes) {
+		dev_err(dsi->dev, "the number of data lanes(%d) is too many\n",
+				device->lanes);
+		return -EINVAL;
+	}
+
+	if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) ||
+	    !(device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) {
+		dev_err(dsi->dev, "device mode is unsupported\n");
+		return -EINVAL;
+	}
+
+	dsi->lanes = device->lanes;
+	dsi->channel = device->channel;
+	dsi->format = device->format;
+	dsi->panel = of_drm_find_panel(device->dev.of_node);
+	drm_panel_attach(dsi->panel, &dsi->connector);
+
+	return 0;
+}
+
+static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+	drm_panel_detach(dsi->panel);
+
+	return 0;
+}
+
+static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 val)
+{
+	int ret;
+
+	ret = check_status(dsi, DSI_CMD_PKT_STATUS, GEN_CMD_FULL,
+			   CMD_PKT_STATUS_TIMEOUT, STATUS_TO_CLEAR);
+	if (ret < 0) {
+		dev_err(dsi->dev, "failed to get available command FIFO\n");
+		return ret;
+	}
+
+	dsi_write(dsi, DSI_GEN_HDR, val);
+
+	ret = check_status(dsi, DSI_CMD_PKT_STATUS,
+			   GEN_CMD_EMPTY | GEN_PLD_W_EMPTY,
+			   CMD_PKT_STATUS_TIMEOUT, STATUS_TO_SET);
+	if (ret < 0) {
+		dev_err(dsi->dev, "failed to write command FIFO\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
+				       const struct mipi_dsi_msg *msg)
+{
+	const u16 *tx_buf = msg->tx_buf;
+	u32 val = GEN_HDATA(*tx_buf) | GEN_HTYPE(msg->type);
+
+	if (msg->tx_len > 2) {
+		dev_err(dsi->dev, "too long tx buf length %d for short write\n",
+			msg->tx_len);
+		return -EINVAL;
+	}
+
+	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
+}
+
+static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
+				      const struct mipi_dsi_msg *msg)
+{
+	const u32 *tx_buf = msg->tx_buf;
+	int len = msg->tx_len, pld_data_bytes = sizeof(*tx_buf), ret;
+	u32 val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
+	u32 remainder = 0;
+
+	if (msg->tx_len < 3) {
+		dev_err(dsi->dev, "wrong tx buf length %d for long write\n",
+			msg->tx_len);
+		return -EINVAL;
+	}
+
+	while (DIV_ROUND_UP(len, pld_data_bytes)) {
+		if (len < pld_data_bytes) {
+			memcpy(&remainder, tx_buf, len);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
+			len = 0;
+		} else {
+			dsi_write(dsi, DSI_GEN_PLD_DATA, *tx_buf);
+			tx_buf++;
+			len -= pld_data_bytes;
+		}
+		ret = check_status(dsi, DSI_CMD_PKT_STATUS, GEN_PLD_W_FULL,
+				   CMD_PKT_STATUS_TIMEOUT, STATUS_TO_CLEAR);
+		if (ret < 0) {
+			dev_err(dsi->dev,
+				"failed to get available write payload FIFO\n");
+			return ret;
+		}
+	}
+
+	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
+}
+
+static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
+					 const struct mipi_dsi_msg *msg)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+	int ret;
+
+	switch (msg->type) {
+	case MIPI_DSI_DCS_SHORT_WRITE:
+	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
+		break;
+	case MIPI_DSI_DCS_LONG_WRITE:
+		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
+		break;
+	default:
+		dev_err(dsi->dev, "unsupported message type\n");
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
+	.attach = dw_mipi_dsi_host_attach,
+	.detach = dw_mipi_dsi_host_detach,
+	.transfer = dw_mipi_dsi_host_transfer,
+};
+
+static enum drm_connector_status
+dw_mipi_dsi_detect(struct drm_connector *connector, bool force)
+{
+	return connector_status_connected;
+}
+
+static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+}
+
+static struct drm_connector_funcs dw_mipi_dsi_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.detect = dw_mipi_dsi_detect,
+	.destroy = dw_mipi_dsi_drm_connector_destroy,
+};
+
+static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
+{
+	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+	return drm_panel_get_modes(dsi->panel);
+}
+
+static enum drm_mode_status dw_mipi_dsi_mode_valid(
+					struct drm_connector *connector,
+					struct drm_display_mode *mode)
+{
+	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+	enum drm_mode_status mode_status = MODE_OK;
+
+	if (dsi->pdata->mode_valid)
+		mode_status = dsi->pdata->mode_valid(connector, mode);
+
+	return mode_status;
+}
+
+static struct drm_encoder *dw_mipi_dsi_connector_best_encoder(
+					struct drm_connector *connector)
+{
+	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+	return dsi->encoder;
+}
+
+static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
+	.get_modes = dw_mipi_dsi_connector_get_modes,
+	.mode_valid = dw_mipi_dsi_mode_valid,
+	.best_encoder = dw_mipi_dsi_connector_best_encoder,
+};
+
+static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
+{
+	u32 val;
+
+	val = VID_MODE_TYPE_BURST_SYNC_PULSES | ENABLE_LOW_POWER;
+
+	dsi_write(dsi, DSI_VID_MODE_CFG, val);
+}
+
+static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
+				 enum dw_mipi_dsi_mode mode)
+{
+	if (mode == DW_MIPI_DSI_CMD_MODE) {
+		dsi_write(dsi, DSI_PWR_UP, RESET);
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+		dsi_write(dsi, DSI_PWR_UP, POWERUP);
+	} else {
+		dsi_write(dsi, DSI_PWR_UP, RESET);
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
+		dw_mipi_dsi_video_mode_config(dsi);
+		dsi_write(dsi, DSI_PWR_UP, POWERUP);
+	}
+}
+
+static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
+}
+
+static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge->driver_private;
+
+	if (dsi->enabled)
+		return;
+
+	if (!IS_ERR(dsi->cfg_clk))
+		clk_prepare_enable(dsi->cfg_clk);
+
+	clk_prepare_enable(dsi->pclk);
+	dw_mipi_dsi_phy_init(dsi);
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+	dw_mipi_dsi_wait_for_two_frames(dsi);
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+	drm_panel_prepare(dsi->panel);
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+	clk_disable_unprepare(dsi->pclk);
+
+	if (!IS_ERR(dsi->cfg_clk))
+		clk_disable_unprepare(dsi->cfg_clk);
+
+	drm_panel_enable(dsi->panel);
+
+	dsi->enabled = true;
+}
+
+static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge->driver_private;
+	unsigned long expire;
+
+	if (!dsi->enabled)
+		return;
+
+	drm_panel_disable(dsi->panel);
+
+	if (!IS_ERR(dsi->cfg_clk))
+		clk_prepare_enable(dsi->cfg_clk);
+
+	clk_prepare_enable(dsi->pclk);
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+	drm_panel_unprepare(dsi->panel);
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+
+	/*
+	 * This is necessary to make sure the peripheral
+	 * will be driven normally when the display is
+	 * enabled again later.
+	 */
+	expire = jiffies + msecs_to_jiffies(120);
+	while (time_before(jiffies, expire))
+		cpu_relax();
+
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+	dw_mipi_dsi_disable(dsi);
+	clk_disable_unprepare(dsi->pclk);
+
+	if (!IS_ERR(dsi->cfg_clk))
+		clk_disable_unprepare(dsi->cfg_clk);
+
+	dsi->enabled = false;
+}
+
+static void dw_mipi_dsi_bridge_nope(struct drm_bridge *bridge)
+{
+	/* do nothing */
+}
+
+static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
+		  | PHY_RSTZ | PHY_SHUTDOWNZ);
+	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
+		  TX_ESC_CLK_DIVIDSION(7));
+	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
+}
+
+static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
+				   struct drm_display_mode *mode)
+{
+	u32 val = 0, calor = 0;
+
+	switch (dsi->format) {
+	case MIPI_DSI_FMT_RGB888:
+		calor = DPI_COLOR_CODING_24BIT;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		calor = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		calor = DPI_COLOR_CODING_18BIT_1;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		calor = DPI_COLOR_CODING_16BIT_1;
+		break;
+	}
+
+	if (!(mode->flags & DRM_MODE_FLAG_PVSYNC))
+		val |= VSYNC_ACTIVE_LOW;
+	if (!(mode->flags & DRM_MODE_FLAG_PHSYNC))
+		val |= HSYNC_ACTIVE_LOW;
+
+	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
+	dsi_write(dsi, DSI_DPI_COLOR_CODING, calor);
+	dsi_write(dsi, DSI_DPI_CFG_POL, val);
+	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
+		  | INVACT_LPCMD_TIME(4));
+}
+
+static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
+}
+
+static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
+					    struct drm_display_mode *mode)
+{
+	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
+}
+
+static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
+	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
+	dsi_write(dsi, DSI_CMD_MODE_CFG, CMD_MODE_ALL_LP);
+	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+}
+
+/* Get lane byte clock cycles. */
+static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
+					   u32 hcomponent)
+{
+	u32 frac, lbcc;
+
+	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
+
+	frac = do_div(lbcc, dsi->mode->clock);
+	if (frac)
+		lbcc++;
+
+	return lbcc;
+}
+
+static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi)
+{
+	u32 htotal, hsa, hbp, lbcc;
+	struct drm_display_mode *mode = dsi->mode;
+
+	htotal = mode->htotal;
+	hsa = mode->hsync_end - mode->hsync_start;
+	hbp = mode->htotal - mode->hsync_end;
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, htotal);
+	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, hsa);
+	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, hbp);
+	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
+}
+
+static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi)
+{
+	u32 vactive, vsa, vfp, vbp;
+	struct drm_display_mode *mode = dsi->mode;
+
+	vactive = mode->vdisplay;
+	vsa = mode->vsync_end - mode->vsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
+	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
+	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
+	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
+}
+
+static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
+		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
+
+	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
+		  | PHY_CLKLP2HS_TIME(0x40));
+}
+
+static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
+		  N_LANES(dsi->lanes));
+}
+
+static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
+{
+	dsi_read(dsi, DSI_INT_ST0);
+	dsi_read(dsi, DSI_INT_ST1);
+	dsi_write(dsi, DSI_INT_MSK0, 0);
+	dsi_write(dsi, DSI_INT_MSK1, 0);
+}
+
+static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
+					struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode)
+{
+	struct dw_mipi_dsi *dsi = bridge->driver_private;
+	int ret;
+
+	dsi->mode = adjusted_mode;
+
+	ret = dw_mipi_dsi_get_lane_bps(dsi);
+	if (ret < 0)
+		return;
+
+	if (!IS_ERR(dsi->cfg_clk))
+		clk_prepare_enable(dsi->cfg_clk);
+
+	clk_prepare_enable(dsi->pclk);
+	dw_mipi_dsi_init(dsi);
+	dw_mipi_dsi_dpi_config(dsi, mode);
+	dw_mipi_dsi_packet_handler_config(dsi);
+	dw_mipi_dsi_video_mode_config(dsi);
+	dw_mipi_dsi_video_packet_config(dsi, mode);
+	dw_mipi_dsi_command_mode_config(dsi);
+	dw_mipi_dsi_line_timer_config(dsi);
+	dw_mipi_dsi_vertical_timing_config(dsi);
+	dw_mipi_dsi_dphy_timing_config(dsi);
+	dw_mipi_dsi_dphy_interface_config(dsi);
+	dw_mipi_dsi_clear_err(dsi);
+	dw_mipi_dsi_phy_init(dsi);
+	dw_mipi_dsi_wait_for_two_frames(dsi);
+	drm_panel_prepare(dsi->panel);
+	clk_disable_unprepare(dsi->pclk);
+
+	if (!IS_ERR(dsi->cfg_clk))
+		clk_disable_unprepare(dsi->cfg_clk);
+}
+
+static bool dw_mipi_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
+					const struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
+	.enable = dw_mipi_dsi_bridge_enable,
+	.disable = dw_mipi_dsi_bridge_disable,
+	.pre_enable = dw_mipi_dsi_bridge_nope,
+	.post_disable = dw_mipi_dsi_bridge_nope,
+	.mode_set = dw_mipi_dsi_bridge_mode_set,
+	.mode_fixup = dw_mipi_dsi_bridge_mode_fixup,
+};
+
+static int dw_mipi_dsi_register(struct drm_device *drm, struct dw_mipi_dsi *dsi)
+{
+	struct drm_encoder *encoder = dsi->encoder;
+	struct drm_bridge *bridge;
+	int ret;
+
+	bridge = devm_kzalloc(drm->dev, sizeof(*bridge), GFP_KERNEL);
+	if (!bridge)
+		return -ENOMEM;
+
+	dsi->bridge = bridge;
+	bridge->driver_private = dsi;
+
+	bridge->funcs = &dw_mipi_dsi_bridge_funcs;
+	ret = drm_bridge_attach(drm, bridge);
+	if (ret) {
+		DRM_ERROR("failed to initialize bridge with drm\n");
+		return ret;
+	}
+
+	encoder->bridge = bridge;
+
+	drm_connector_helper_add(&dsi->connector,
+			&dw_mipi_dsi_connector_helper_funcs);
+	drm_connector_init(drm, &dsi->connector, &dw_mipi_dsi_connector_funcs,
+			   DRM_MODE_CONNECTOR_DSI);
+
+	drm_mode_connector_attach_encoder(&dsi->connector, dsi->encoder);
+
+	return 0;
+}
+
+int dw_mipi_dsi_bind(struct device *dev, struct device *master, void *data,
+		     struct drm_encoder *encoder,
+		     const struct dw_mipi_dsi_plat_data *pdata)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *res;
+	struct drm_device *drm = data;
+	struct dw_mipi_dsi *dsi;
+	u32 val;
+	int ret;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return -ENOMEM;
+
+	dsi->pdata = pdata;
+	dsi->dev = dev;
+	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
+	dsi->dsi_host.dev = dev;
+	dsi->encoder = encoder;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	dsi->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(dsi->base))
+		return PTR_ERR(dsi->base);
+
+	dsi->pllref_clk = devm_clk_get(dev, "ref");
+	if (IS_ERR(dsi->pllref_clk)) {
+		ret = PTR_ERR(dsi->pllref_clk);
+		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
+		return ret;
+	}
+	clk_prepare_enable(dsi->pllref_clk);
+
+	dsi->cfg_clk = devm_clk_get(dev, "cfg");
+	if (IS_ERR(dsi->cfg_clk))
+		dev_warn(dev, "Have no configuration clock\n");
+
+	dsi->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(dsi->pclk)) {
+		ret = PTR_ERR(dsi->pclk);
+		dev_err(dev, "Unable to get configuration clock: %d\n", ret);
+		goto err_pllref;
+	}
+
+	if (!IS_ERR(dsi->cfg_clk))
+		clk_prepare_enable(dsi->cfg_clk);
+
+	clk_prepare_enable(dsi->pclk);
+	val = dsi_read(dsi, DSI_VERSION);
+	clk_disable_unprepare(dsi->pclk);
+
+	if (!IS_ERR(dsi->cfg_clk))
+		clk_disable_unprepare(dsi->cfg_clk);
+
+	dev_info(dev, "version number is 0x%08x\n", val);
+
+	ret = dw_mipi_dsi_register(drm, dsi);
+	if (ret) {
+		dev_err(dev, "Unable to register dsi: %d\n", ret);
+		goto err_pllref;
+	}
+	dev_set_drvdata(dev, dsi);
+
+	return mipi_dsi_host_register(&dsi->dsi_host);
+
+err_pllref:
+	clk_disable_unprepare(dsi->pllref_clk);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
+
+void dw_mipi_dsi_unbind(struct device *dev, struct device *master, void *data)
+{
+	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
+
+	mipi_dsi_host_unregister(&dsi->dsi_host);
+	clk_disable_unprepare(dsi->pllref_clk);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
+
+MODULE_DESCRIPTION("Synopsys DesignWare MIPI DSI host controller driver");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/drm/bridge/dw_mipi_dsi.h b/include/drm/bridge/dw_mipi_dsi.h
new file mode 100644
index 0000000..2e351e4
--- /dev/null
+++ b/include/drm/bridge/dw_mipi_dsi.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#ifndef __DW_MIPI_DSI__
+#define __DW_MIPI_DSI__
+
+#include <drm/drmP.h>
+
+struct dw_mipi_dsi_plat_data {
+	unsigned int max_data_lanes;
+	enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
+					   struct drm_display_mode *mode);
+};
+
+int dw_mipi_dsi_get_encoder_pixel_format(struct drm_encoder *encoder);
+
+int dw_mipi_dsi_bind(struct device *dev, struct device *master,
+		     void *data, struct drm_encoder *encoder,
+		     const struct dw_mipi_dsi_plat_data *pdata);
+void dw_mipi_dsi_unbind(struct device *dev, struct device *master, void *data);
+#endif	/* __DW_MIPI_DSI__ */
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 07/13] drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
  2015-10-31 12:55 ` Chris Zhong
@ 2015-10-31 12:56   ` Chris Zhong
  -1 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, Mark Yao, linux-kernel, dri-devel, David Airlie,
	linux-arm-kernel

Add support for Synopsys DesignWare MIPI DSI host controller which is
embedded in the rk3288 SoCs.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 drivers/gpu/drm/rockchip/Kconfig                |  10 +
 drivers/gpu/drm/rockchip/Makefile               |   1 +
 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c | 249 ++++++++++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c     |   3 +
 4 files changed, 263 insertions(+)
 create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..24395f3 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
 	  for the Synopsys DesignWare HDMI driver. If you want to
 	  enable HDMI on RK3288 based SoC, you should selet this
 	  option.
+
+config ROCKCHIP_DW_MIPI_DSI
+	bool "Rockchip specific extensions for Synopsys DW MIPI DSI"
+	depends on DRM_ROCKCHIP
+	select DRM_DW_MIPI_DSI
+	help
+	 This selects support for Rockchip SoC specific extensions
+	 for the Synopsys DesignWare HDMI driver. If you want to
+	 enable MIPI DSI on RK3288 based SoC, you should selet this
+	 option.
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..6a97059 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \
 		rockchip_drm_gem.o
 
 obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw_mipi_dsi_rockchip.o
 
 obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c b/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
new file mode 100644
index 0000000..a0bb4eb
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/component.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/videodev2.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_of.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define DRIVER_NAME	"rockchip-mipi-dsi"
+
+#define GRF_SOC_CON6                    0x025c
+#define DSI0_SEL_VOP_LIT                (1 << 6)
+#define DSI1_SEL_VOP_LIT                (1 << 9)
+
+struct rockchip_mipi_dsi {
+	struct drm_encoder encoder;
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+static inline struct rockchip_mipi_dsi *enc_to_dsi(struct drm_encoder *enc)
+{
+	return container_of(enc, struct rockchip_mipi_dsi, encoder);
+}
+
+static struct drm_encoder_funcs rockchip_mipi_dsi_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static int rockchip_mipi_parse_dt(struct rockchip_mipi_dsi *dsi)
+{
+	struct device_node *np = dsi->dev->of_node;
+
+	dsi->regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	if (IS_ERR(dsi->regmap)) {
+		dev_err(dsi->dev, "Unable to get rockchip,grf\n");
+		return PTR_ERR(dsi->regmap);
+	}
+
+	return 0;
+}
+
+static bool rockchip_mipi_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
+					const struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void rockchip_mipi_dsi_encoder_prepare(struct drm_encoder *encoder)
+{
+	u32 encoder_pix_fmt, interface_pix_fmt;
+
+	encoder_pix_fmt = dw_mipi_dsi_get_encoder_pixel_format(encoder);
+
+	switch (encoder_pix_fmt) {
+	case MIPI_DSI_FMT_RGB888:
+		interface_pix_fmt = ROCKCHIP_OUT_MODE_P888;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		interface_pix_fmt = ROCKCHIP_OUT_MODE_P666;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		interface_pix_fmt = ROCKCHIP_OUT_MODE_P565;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
+	rockchip_drm_crtc_mode_config(encoder->crtc, DRM_MODE_CONNECTOR_DSI,
+				      interface_pix_fmt);
+}
+
+static void rockchip_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
+					struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode)
+{
+}
+
+static void rockchip_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
+{
+	struct rockchip_mipi_dsi *dsi = enc_to_dsi(encoder);
+	u32 val;
+	int mux  = rockchip_drm_encoder_get_mux_id(dsi->dev->of_node, encoder);
+
+	if (mux)
+		val = DSI0_SEL_VOP_LIT | (DSI0_SEL_VOP_LIT << 16);
+	else
+		val = DSI0_SEL_VOP_LIT << 16;
+
+	regmap_write(dsi->regmap, GRF_SOC_CON6, val);
+	dev_dbg(dsi->dev, "vop %s output to dsi0\n",
+		(mux) ? "LIT" : "BIG");
+}
+
+static void rockchip_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
+{
+}
+
+static struct drm_encoder_helper_funcs
+rockchip_mipi_dsi_encoder_helper_funcs = {
+	.mode_fixup = rockchip_mipi_dsi_encoder_mode_fixup,
+	.prepare = rockchip_mipi_dsi_encoder_prepare,
+	.mode_set = rockchip_mipi_dsi_encoder_mode_set,
+	.commit = rockchip_mipi_dsi_encoder_commit,
+	.disable = rockchip_mipi_dsi_encoder_disable,
+};
+
+static int rockchip_mipi_dsi_register(struct drm_device *drm,
+				      struct rockchip_mipi_dsi *dsi)
+{
+	struct drm_encoder *encoder = &dsi->encoder;
+	struct device *dev = dsi->dev;
+
+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm,
+							     dev->of_node);
+	/*
+	 * If we failed to find the CRTC(s) which this encoder is
+	 * supposed to be connected to, it's because the CRTC has
+	 * not been registered yet.  Defer probing, and hope that
+	 * the required CRTC is added later.
+	 */
+	if (encoder->possible_crtcs == 0)
+		return -EPROBE_DEFER;
+
+	drm_encoder_helper_add(&dsi->encoder,
+			       &rockchip_mipi_dsi_encoder_helper_funcs);
+	drm_encoder_init(drm, &dsi->encoder, &rockchip_mipi_dsi_encoder_funcs,
+			 DRM_MODE_ENCODER_DSI);
+	return 0;
+}
+
+static enum drm_mode_status rockchip_mipi_dsi_mode_valid(
+					struct drm_connector *connector,
+					struct drm_display_mode *mode)
+{
+	/*
+	 * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
+	 * register is 11-bit.
+	 */
+	if (mode->hdisplay > 0x7ff)
+		return MODE_BAD_HVALUE;
+
+	/*
+	 * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
+	 * register is 11-bit.
+	 */
+	if (mode->vdisplay > 0x7ff)
+		return MODE_BAD_VVALUE;
+
+	return MODE_OK;
+}
+
+static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
+	.max_data_lanes = 4,
+	.mode_valid = rockchip_mipi_dsi_mode_valid,
+};
+
+static const struct of_device_id rockchip_mipi_dsi_dt_ids[] = {
+	{
+	 .compatible = "rockchip,rk3288-mipi-dsi",
+	 .data = &rk3288_mipi_dsi_drv_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rockchip_mipi_dsi_dt_ids);
+
+static int rockchip_mipi_dsi_bind(struct device *dev, struct device *master,
+			     void *data)
+{
+	const struct of_device_id *of_id =
+			of_match_device(rockchip_mipi_dsi_dt_ids, dev);
+	const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
+	struct drm_device *drm = data;
+	struct rockchip_mipi_dsi *dsi;
+	int ret;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return -ENOMEM;
+
+	dsi->dev = dev;
+
+	ret = rockchip_mipi_dsi_register(drm, dsi);
+	if (ret)
+		return ret;
+
+	ret = rockchip_mipi_parse_dt(dsi);
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(dev, dsi);
+
+	return dw_mipi_dsi_bind(dev, master, data, &dsi->encoder, pdata);
+}
+
+static void rockchip_mipi_dsi_unbind(struct device *dev, struct device *master,
+	void *data)
+{
+	return dw_mipi_dsi_unbind(dev, master, data);
+}
+
+static const struct component_ops rockchip_mipi_dsi_ops = {
+	.bind	= rockchip_mipi_dsi_bind,
+	.unbind	= rockchip_mipi_dsi_unbind,
+};
+
+static int rockchip_mipi_dsi_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &rockchip_mipi_dsi_ops);
+}
+
+static int rockchip_mipi_dsi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &rockchip_mipi_dsi_ops);
+	return 0;
+}
+
+static struct platform_driver rockchip_mipi_dsi_driver = {
+	.probe		= rockchip_mipi_dsi_probe,
+	.remove		= rockchip_mipi_dsi_remove,
+	.driver		= {
+		.of_match_table = rockchip_mipi_dsi_dt_ids,
+		.name	= DRIVER_NAME,
+	},
+};
+module_platform_driver(rockchip_mipi_dsi_driver);
+
+MODULE_DESCRIPTION("ROCKCHIP MIPI DSI host controller driver");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 9986b311ed..977c17c 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1194,6 +1194,9 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
 	case DRM_MODE_CONNECTOR_HDMIA:
 		VOP_CTRL_SET(vop, hdmi_en, 1);
 		break;
+	case DRM_MODE_CONNECTOR_DSI:
+		VOP_CTRL_SET(vop, mipi_en, 1);
+		break;
 	default:
 		DRM_ERROR("unsupport connector_type[%d]\n",
 			  vop->connector_type);
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 07/13] drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
@ 2015-10-31 12:56   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: linux-arm-kernel

Add support for Synopsys DesignWare MIPI DSI host controller which is
embedded in the rk3288 SoCs.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 drivers/gpu/drm/rockchip/Kconfig                |  10 +
 drivers/gpu/drm/rockchip/Makefile               |   1 +
 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c | 249 ++++++++++++++++++++++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c     |   3 +
 4 files changed, 263 insertions(+)
 create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..24395f3 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
 	  for the Synopsys DesignWare HDMI driver. If you want to
 	  enable HDMI on RK3288 based SoC, you should selet this
 	  option.
+
+config ROCKCHIP_DW_MIPI_DSI
+	bool "Rockchip specific extensions for Synopsys DW MIPI DSI"
+	depends on DRM_ROCKCHIP
+	select DRM_DW_MIPI_DSI
+	help
+	 This selects support for Rockchip SoC specific extensions
+	 for the Synopsys DesignWare HDMI driver. If you want to
+	 enable MIPI DSI on RK3288 based SoC, you should selet this
+	 option.
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..6a97059 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \
 		rockchip_drm_gem.o
 
 obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw_mipi_dsi_rockchip.o
 
 obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c b/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
new file mode 100644
index 0000000..a0bb4eb
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/component.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/videodev2.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_of.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define DRIVER_NAME	"rockchip-mipi-dsi"
+
+#define GRF_SOC_CON6                    0x025c
+#define DSI0_SEL_VOP_LIT                (1 << 6)
+#define DSI1_SEL_VOP_LIT                (1 << 9)
+
+struct rockchip_mipi_dsi {
+	struct drm_encoder encoder;
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+static inline struct rockchip_mipi_dsi *enc_to_dsi(struct drm_encoder *enc)
+{
+	return container_of(enc, struct rockchip_mipi_dsi, encoder);
+}
+
+static struct drm_encoder_funcs rockchip_mipi_dsi_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static int rockchip_mipi_parse_dt(struct rockchip_mipi_dsi *dsi)
+{
+	struct device_node *np = dsi->dev->of_node;
+
+	dsi->regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	if (IS_ERR(dsi->regmap)) {
+		dev_err(dsi->dev, "Unable to get rockchip,grf\n");
+		return PTR_ERR(dsi->regmap);
+	}
+
+	return 0;
+}
+
+static bool rockchip_mipi_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
+					const struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void rockchip_mipi_dsi_encoder_prepare(struct drm_encoder *encoder)
+{
+	u32 encoder_pix_fmt, interface_pix_fmt;
+
+	encoder_pix_fmt = dw_mipi_dsi_get_encoder_pixel_format(encoder);
+
+	switch (encoder_pix_fmt) {
+	case MIPI_DSI_FMT_RGB888:
+		interface_pix_fmt = ROCKCHIP_OUT_MODE_P888;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		interface_pix_fmt = ROCKCHIP_OUT_MODE_P666;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		interface_pix_fmt = ROCKCHIP_OUT_MODE_P565;
+		break;
+	default:
+		WARN_ON(1);
+		return;
+	}
+
+	rockchip_drm_crtc_mode_config(encoder->crtc, DRM_MODE_CONNECTOR_DSI,
+				      interface_pix_fmt);
+}
+
+static void rockchip_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
+					struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode)
+{
+}
+
+static void rockchip_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
+{
+	struct rockchip_mipi_dsi *dsi = enc_to_dsi(encoder);
+	u32 val;
+	int mux  = rockchip_drm_encoder_get_mux_id(dsi->dev->of_node, encoder);
+
+	if (mux)
+		val = DSI0_SEL_VOP_LIT | (DSI0_SEL_VOP_LIT << 16);
+	else
+		val = DSI0_SEL_VOP_LIT << 16;
+
+	regmap_write(dsi->regmap, GRF_SOC_CON6, val);
+	dev_dbg(dsi->dev, "vop %s output to dsi0\n",
+		(mux) ? "LIT" : "BIG");
+}
+
+static void rockchip_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
+{
+}
+
+static struct drm_encoder_helper_funcs
+rockchip_mipi_dsi_encoder_helper_funcs = {
+	.mode_fixup = rockchip_mipi_dsi_encoder_mode_fixup,
+	.prepare = rockchip_mipi_dsi_encoder_prepare,
+	.mode_set = rockchip_mipi_dsi_encoder_mode_set,
+	.commit = rockchip_mipi_dsi_encoder_commit,
+	.disable = rockchip_mipi_dsi_encoder_disable,
+};
+
+static int rockchip_mipi_dsi_register(struct drm_device *drm,
+				      struct rockchip_mipi_dsi *dsi)
+{
+	struct drm_encoder *encoder = &dsi->encoder;
+	struct device *dev = dsi->dev;
+
+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm,
+							     dev->of_node);
+	/*
+	 * If we failed to find the CRTC(s) which this encoder is
+	 * supposed to be connected to, it's because the CRTC has
+	 * not been registered yet.  Defer probing, and hope that
+	 * the required CRTC is added later.
+	 */
+	if (encoder->possible_crtcs == 0)
+		return -EPROBE_DEFER;
+
+	drm_encoder_helper_add(&dsi->encoder,
+			       &rockchip_mipi_dsi_encoder_helper_funcs);
+	drm_encoder_init(drm, &dsi->encoder, &rockchip_mipi_dsi_encoder_funcs,
+			 DRM_MODE_ENCODER_DSI);
+	return 0;
+}
+
+static enum drm_mode_status rockchip_mipi_dsi_mode_valid(
+					struct drm_connector *connector,
+					struct drm_display_mode *mode)
+{
+	/*
+	 * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
+	 * register is 11-bit.
+	 */
+	if (mode->hdisplay > 0x7ff)
+		return MODE_BAD_HVALUE;
+
+	/*
+	 * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
+	 * register is 11-bit.
+	 */
+	if (mode->vdisplay > 0x7ff)
+		return MODE_BAD_VVALUE;
+
+	return MODE_OK;
+}
+
+static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
+	.max_data_lanes = 4,
+	.mode_valid = rockchip_mipi_dsi_mode_valid,
+};
+
+static const struct of_device_id rockchip_mipi_dsi_dt_ids[] = {
+	{
+	 .compatible = "rockchip,rk3288-mipi-dsi",
+	 .data = &rk3288_mipi_dsi_drv_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rockchip_mipi_dsi_dt_ids);
+
+static int rockchip_mipi_dsi_bind(struct device *dev, struct device *master,
+			     void *data)
+{
+	const struct of_device_id *of_id =
+			of_match_device(rockchip_mipi_dsi_dt_ids, dev);
+	const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
+	struct drm_device *drm = data;
+	struct rockchip_mipi_dsi *dsi;
+	int ret;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return -ENOMEM;
+
+	dsi->dev = dev;
+
+	ret = rockchip_mipi_dsi_register(drm, dsi);
+	if (ret)
+		return ret;
+
+	ret = rockchip_mipi_parse_dt(dsi);
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(dev, dsi);
+
+	return dw_mipi_dsi_bind(dev, master, data, &dsi->encoder, pdata);
+}
+
+static void rockchip_mipi_dsi_unbind(struct device *dev, struct device *master,
+	void *data)
+{
+	return dw_mipi_dsi_unbind(dev, master, data);
+}
+
+static const struct component_ops rockchip_mipi_dsi_ops = {
+	.bind	= rockchip_mipi_dsi_bind,
+	.unbind	= rockchip_mipi_dsi_unbind,
+};
+
+static int rockchip_mipi_dsi_probe(struct platform_device *pdev)
+{
+	return component_add(&pdev->dev, &rockchip_mipi_dsi_ops);
+}
+
+static int rockchip_mipi_dsi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &rockchip_mipi_dsi_ops);
+	return 0;
+}
+
+static struct platform_driver rockchip_mipi_dsi_driver = {
+	.probe		= rockchip_mipi_dsi_probe,
+	.remove		= rockchip_mipi_dsi_remove,
+	.driver		= {
+		.of_match_table = rockchip_mipi_dsi_dt_ids,
+		.name	= DRIVER_NAME,
+	},
+};
+module_platform_driver(rockchip_mipi_dsi_driver);
+
+MODULE_DESCRIPTION("ROCKCHIP MIPI DSI host controller driver");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 9986b311ed..977c17c 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1194,6 +1194,9 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
 	case DRM_MODE_CONNECTOR_HDMIA:
 		VOP_CTRL_SET(vop, hdmi_en, 1);
 		break;
+	case DRM_MODE_CONNECTOR_DSI:
+		VOP_CTRL_SET(vop, mipi_en, 1);
+		break;
 	default:
 		DRM_ERROR("unsupport connector_type[%d]\n",
 			  vop->connector_type);
-- 
2.6.2

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  2015-10-31 12:55 ` Chris Zhong
@ 2015-10-31 12:56   ` Chris Zhong
  -1 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, devicetree, Kumar Gala, linux-kernel, Ian Campbell,
	Rob Herring, Pawel Moll, Mark Rutland, linux-arm-kernel

add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 .../bindings/video/dw_mipi_dsi_rockchip.txt        | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt

diff --git a/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
new file mode 100644
index 0000000..4dea804
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
@@ -0,0 +1,56 @@
+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [1].
+  For vopb,set the reg = <0> and set the reg = <1> for vopl.
+
+For more required properties, please refer to [2].
+
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+[2] Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
+
+Example:
+	mipi_dsi: mipi@ff960000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+
+		panel {
+			compatible ="boe,tv080wum-nl0";
+			reg = <0>;
+
+			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lcd_en>;
+			backlight = <&backlight>;
+			status = "okay";
+		};
+	};
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
@ 2015-10-31 12:56   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: linux-arm-kernel

add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 .../bindings/video/dw_mipi_dsi_rockchip.txt        | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt

diff --git a/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
new file mode 100644
index 0000000..4dea804
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
@@ -0,0 +1,56 @@
+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [1].
+  For vopb,set the reg = <0> and set the reg = <1> for vopl.
+
+For more required properties, please refer to [2].
+
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+[2] Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
+
+Example:
+	mipi_dsi: mipi at ff960000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint at 0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint at 1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+
+		panel {
+			compatible ="boe,tv080wum-nl0";
+			reg = <0>;
+
+			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lcd_en>;
+			backlight = <&backlight>;
+			status = "okay";
+		};
+	};
-- 
2.6.2

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 09/13] ARM: dts: rockchip: add rk3288 mipi_dsi nodes
@ 2015-10-31 12:56   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, Russell King, devicetree, Kumar Gala, linux-kernel,
	Ian Campbell, Rob Herring, Pawel Moll, Mark Rutland,
	linux-arm-kernel

Add a mipi_dsi node, and also add mipi_dsi endpoints to vopb and vopl
output port nodes.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 arch/arm/boot/dts/rk3288.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6a79c9c..a5c5670 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -798,6 +798,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopb>;
 			};
+			vopb_out_mipi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
 		};
 	};
 
@@ -831,6 +835,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopl>;
 			};
+			vopl_out_mipi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
 		};
 	};
 
@@ -871,6 +879,37 @@
 		};
 	};
 
+	mipi_dsi: mipi@ff960000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
 	gic: interrupt-controller@ffc01000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 09/13] ARM: dts: rockchip: add rk3288 mipi_dsi nodes
@ 2015-10-31 12:56   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko-4mtYJXux2i+zQB+pC5nmwQ,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
  Cc: Chris Zhong, Russell King, devicetree-u79uwXL29TY76Z2rM5mHXA,
	Kumar Gala, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Ian Campbell,
	Rob Herring, Pawel Moll, Mark Rutland,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

Add a mipi_dsi node, and also add mipi_dsi endpoints to vopb and vopl
output port nodes.

Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---

Changes in v2: None

 arch/arm/boot/dts/rk3288.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6a79c9c..a5c5670 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -798,6 +798,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopb>;
 			};
+			vopb_out_mipi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
 		};
 	};
 
@@ -831,6 +835,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopl>;
 			};
+			vopl_out_mipi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
 		};
 	};
 
@@ -871,6 +879,37 @@
 		};
 	};
 
+	mipi_dsi: mipi@ff960000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
 	gic: interrupt-controller@ffc01000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 09/13] ARM: dts: rockchip: add rk3288 mipi_dsi nodes
@ 2015-10-31 12:56   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: linux-arm-kernel

Add a mipi_dsi node, and also add mipi_dsi endpoints to vopb and vopl
output port nodes.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 arch/arm/boot/dts/rk3288.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6a79c9c..a5c5670 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -798,6 +798,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopb>;
 			};
+			vopb_out_mipi: endpoint at 1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
 		};
 	};
 
@@ -831,6 +835,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopl>;
 			};
+			vopl_out_mipi: endpoint at 1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
 		};
 	};
 
@@ -871,6 +879,37 @@
 		};
 	};
 
+	mipi_dsi: mipi at ff960000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint at 0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint at 1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
 	gic: interrupt-controller at ffc01000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
-- 
2.6.2

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 10/13] of: add vendor prefix for boe
  2015-10-31 12:55 ` Chris Zhong
                   ` (10 preceding siblings ...)
  (?)
@ 2015-10-31 12:56 ` Chris Zhong
  2015-11-03  2:24     ` Rob Herring
  -1 siblings, 1 reply; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, devicetree, Arnd Bergmann, Thierry Reding,
	linux-kernel, Philipp Zabel, Kumar Gala, Kuninori Morimoto,
	Ian Campbell, Arnaud Ebalard, Rob Herring, Antony Pavlov,
	Pawel Moll, Mark Rutland, Jonathan Cameron

Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

Changes in v2:
add vendor prefix for boe

 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 8fb0590..404b798 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -33,6 +33,7 @@ auo	AU Optronics Corporation
 avago	Avago Technologies
 avic	Shanghai AVIC Optoelectronics Co., Ltd.
 axis	Axis Communications AB
+boe	BOE Technology Group Co., Ltd.
 bosch	Bosch Sensortec GmbH
 boundary	Boundary Devices Inc.
 brcm	Broadcom Corporation
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 11/13] drm/panel: simple: Add support for BOE TV080WUM-NL0
  2015-10-31 12:55 ` Chris Zhong
                   ` (11 preceding siblings ...)
  (?)
@ 2015-10-31 12:56 ` Chris Zhong
  -1 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, Thierry Reding, David Airlie, dri-devel, linux-kernel

This adds support for the BOE TV080WUM-NL0 1200x1920 mipi panel to the
DRM simple panel driver.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 drivers/gpu/drm/panel/panel-simple.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f97b73e..3610e1c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1348,6 +1348,36 @@ static const struct panel_desc_dsi panasonic_vvx10f004b00 = {
 	.lanes = 4,
 };
 
+static const struct drm_display_mode boe_tv080wum_nl0_mode = {
+	.clock = 160000,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 120,
+	.hsync_end = 1200 + 120 + 20,
+	.htotal = 1200 + 120 + 20 + 21,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 21,
+	.vsync_end = 1920 + 21 + 3,
+	.vtotal = 1920 + 21 + 3 + 18,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc_dsi boe_tv080wum_nl0 = {
+	.desc = {
+		.modes = &boe_tv080wum_nl0_mode,
+		.num_modes = 1,
+		.size = {
+			.width = 107,
+			.height = 172,
+		},
+	},
+	.flags = MIPI_DSI_MODE_VIDEO |
+		 MIPI_DSI_MODE_VIDEO_BURST |
+		 MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+	.format = MIPI_DSI_FMT_RGB888,
+	.lanes = 4,
+};
+
 static const struct of_device_id dsi_of_match[] = {
 	{
 		.compatible = "auo,b080uan01",
@@ -1362,6 +1392,9 @@ static const struct of_device_id dsi_of_match[] = {
 		.compatible = "panasonic,vvx10f004b00",
 		.data = &panasonic_vvx10f004b00
 	}, {
+		.compatible = "boe,tv080wum-nl0",
+		.data = &boe_tv080wum_nl0
+	}, {
 		/* sentinel */
 	}
 };
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 12/13] drm/panel: simple: Add simple panel device tree binding
@ 2015-10-31 12:56   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, devicetree, Thierry Reding, Kumar Gala, dri-devel,
	linux-kernel, Ian Campbell, Rob Herring, Pawel Moll,
	Mark Rutland

This binding specifies a set of common properties for display panels. It
can be used as a basis by bindings for specific panels.
Bindings for three specific panels are provided to show how the
simple panel binding can be used.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

Changes in v2:
As Thierry.Reding comment, add a documentation for this panel.

 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt | 7 +++++++
 1 file changed, 7 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt

diff --git a/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
new file mode 100644
index 0000000..50be5e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
@@ -0,0 +1,7 @@
+Boe Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv080wum-nl0"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 12/13] drm/panel: simple: Add simple panel device tree binding
@ 2015-10-31 12:56   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko-4mtYJXux2i+zQB+pC5nmwQ,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
  Cc: Chris Zhong, devicetree-u79uwXL29TY76Z2rM5mHXA, Thierry Reding,
	Kumar Gala, dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Ian Campbell, Rob Herring,
	Pawel Moll, Mark Rutland

This binding specifies a set of common properties for display panels. It
can be used as a basis by bindings for specific panels.
Bindings for three specific panels are provided to show how the
simple panel binding can be used.

Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

---

Changes in v2:
As Thierry.Reding comment, add a documentation for this panel.

 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt | 7 +++++++
 1 file changed, 7 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt

diff --git a/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
new file mode 100644
index 0000000..50be5e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
@@ -0,0 +1,7 @@
+Boe Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv080wum-nl0"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 13/13] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb
  2015-10-31 12:55 ` Chris Zhong
@ 2015-10-31 12:56   ` Chris Zhong
  -1 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: heiko, linux-rockchip
  Cc: Chris Zhong, Russell King, devicetree, Kumar Gala, linux-kernel,
	Ian Campbell, Rob Herring, Pawel Moll, Mark Rutland,
	linux-arm-kernel

This tv080wum-nl0 panel is a mipi panel, it can use in MIPI_TX socket
of rk3288 evb board.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

Changes in v2: None

 arch/arm/boot/dts/rk3288-evb.dtsi | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e78..d04878f 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -47,7 +47,7 @@
 		reg = <0x0 0x80000000>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <
 			  0   1   2   3   4   5   6   7
@@ -177,6 +177,21 @@
 	status = "okay";
 };
 
+&mipi_dsi {
+	status = "okay";
+
+	panel {
+		compatible ="boe,tv080wum-nl0";
+		reg = <0>;
+
+		enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		backlight = <&backlight>;
+		status = "okay";
+	};
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
@@ -247,6 +262,9 @@
 		bl_en: bl-en {
 			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
+		lcd_en: lcd-en {
+			rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	buttons {
-- 
2.6.2


^ permalink raw reply related	[flat|nested] 35+ messages in thread

* [PATCH v2 13/13] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb
@ 2015-10-31 12:56   ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-10-31 12:56 UTC (permalink / raw)
  To: linux-arm-kernel

This tv080wum-nl0 panel is a mipi panel, it can use in MIPI_TX socket
of rk3288 evb board.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

Changes in v2: None

 arch/arm/boot/dts/rk3288-evb.dtsi | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e78..d04878f 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -47,7 +47,7 @@
 		reg = <0x0 0x80000000>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <
 			  0   1   2   3   4   5   6   7
@@ -177,6 +177,21 @@
 	status = "okay";
 };
 
+&mipi_dsi {
+	status = "okay";
+
+	panel {
+		compatible ="boe,tv080wum-nl0";
+		reg = <0>;
+
+		enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		backlight = <&backlight>;
+		status = "okay";
+	};
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
@@ -247,6 +262,9 @@
 		bl_en: bl-en {
 			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
+		lcd_en: lcd-en {
+			rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	buttons {
-- 
2.6.2

^ permalink raw reply related	[flat|nested] 35+ messages in thread

* Re: [PATCH v2 12/13] drm/panel: simple: Add simple panel device tree binding
@ 2015-11-02 15:06     ` Rob Herring
  0 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2015-11-02 15:06 UTC (permalink / raw)
  To: Chris Zhong
  Cc: Heiko Stübner, open list:ARM/Rockchip SoC...,
	devicetree, Thierry Reding, Kumar Gala, dri-devel, linux-kernel,
	Ian Campbell, Pawel Moll, Mark Rutland

On Sat, Oct 31, 2015 at 7:56 AM, Chris Zhong <zyw@rock-chips.com> wrote:

Your subject should be more specific with the panel name.

> This binding specifies a set of common properties for display panels. It
> can be used as a basis by bindings for specific panels.
> Bindings for three specific panels are provided to show how the
> simple panel binding can be used.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>
> ---
>
> Changes in v2:
> As Thierry.Reding comment, add a documentation for this panel.
>
>  Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt

Please move to bindings/display/panel/

>
> diff --git a/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
> new file mode 100644
> index 0000000..50be5e2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
> @@ -0,0 +1,7 @@
> +Boe Corporation 8.0" WUXGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "boe,tv080wum-nl0"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> --
> 2.6.2
>

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v2 12/13] drm/panel: simple: Add simple panel device tree binding
@ 2015-11-02 15:06     ` Rob Herring
  0 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2015-11-02 15:06 UTC (permalink / raw)
  To: Chris Zhong
  Cc: Heiko Stübner, open list:ARM/Rockchip SoC...,
	devicetree-u79uwXL29TY76Z2rM5mHXA, Thierry Reding, Kumar Gala,
	dri-devel, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Ian Campbell,
	Pawel Moll, Mark Rutland

On Sat, Oct 31, 2015 at 7:56 AM, Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:

Your subject should be more specific with the panel name.

> This binding specifies a set of common properties for display panels. It
> can be used as a basis by bindings for specific panels.
> Bindings for three specific panels are provided to show how the
> simple panel binding can be used.
>
> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>
> ---
>
> Changes in v2:
> As Thierry.Reding comment, add a documentation for this panel.
>
>  Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt

Please move to bindings/display/panel/

>
> diff --git a/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
> new file mode 100644
> index 0000000..50be5e2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
> @@ -0,0 +1,7 @@
> +Boe Corporation 8.0" WUXGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "boe,tv080wum-nl0"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> --
> 2.6.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v2 12/13] drm/panel: simple: Add simple panel device tree binding
@ 2015-11-03  0:28       ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-11-03  0:28 UTC (permalink / raw)
  To: Rob Herring
  Cc: Heiko Stübner, open list:ARM/Rockchip SoC...,
	devicetree, Thierry Reding, Kumar Gala, dri-devel, linux-kernel,
	Ian Campbell, Pawel Moll, Mark Rutland

Hi Rob


On 11/02/2015 11:06 PM, Rob Herring wrote:
> On Sat, Oct 31, 2015 at 7:56 AM, Chris Zhong <zyw@rock-chips.com> wrote:
>
> Your subject should be more specific with the panel name.
I'll write more specific in subject next version.
>
>> This binding specifies a set of common properties for display panels. It
>> can be used as a basis by bindings for specific panels.
>> Bindings for three specific panels are provided to show how the
>> simple panel binding can be used.
>>
>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>>
>> ---
>>
>> Changes in v2:
>> As Thierry.Reding comment, add a documentation for this panel.
>>
>>   Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
> Please move to bindings/display/panel/
Okay.
>
>> diff --git a/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
>> new file mode 100644
>> index 0000000..50be5e2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
>> @@ -0,0 +1,7 @@
>> +Boe Corporation 8.0" WUXGA TFT LCD panel
>> +
>> +Required properties:
>> +- compatible: should be "boe,tv080wum-nl0"
>> +
>> +This binding is compatible with the simple-panel binding, which is specified
>> +in simple-panel.txt in this directory.
>> --
>> 2.6.2
>>
>
>



^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v2 12/13] drm/panel: simple: Add simple panel device tree binding
@ 2015-11-03  0:28       ` Chris Zhong
  0 siblings, 0 replies; 35+ messages in thread
From: Chris Zhong @ 2015-11-03  0:28 UTC (permalink / raw)
  To: Rob Herring
  Cc: Heiko Stübner, open list:ARM/Rockchip SoC...,
	devicetree-u79uwXL29TY76Z2rM5mHXA, Thierry Reding, Kumar Gala,
	dri-devel, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Ian Campbell,
	Pawel Moll, Mark Rutland

Hi Rob


On 11/02/2015 11:06 PM, Rob Herring wrote:
> On Sat, Oct 31, 2015 at 7:56 AM, Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
>
> Your subject should be more specific with the panel name.
I'll write more specific in subject next version.
>
>> This binding specifies a set of common properties for display panels. It
>> can be used as a basis by bindings for specific panels.
>> Bindings for three specific panels are provided to show how the
>> simple panel binding can be used.
>>
>> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>>
>> ---
>>
>> Changes in v2:
>> As Thierry.Reding comment, add a documentation for this panel.
>>
>>   Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
> Please move to bindings/display/panel/
Okay.
>
>> diff --git a/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
>> new file mode 100644
>> index 0000000..50be5e2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
>> @@ -0,0 +1,7 @@
>> +Boe Corporation 8.0" WUXGA TFT LCD panel
>> +
>> +Required properties:
>> +- compatible: should be "boe,tv080wum-nl0"
>> +
>> +This binding is compatible with the simple-panel binding, which is specified
>> +in simple-panel.txt in this directory.
>> --
>> 2.6.2
>>
>
>


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v2 10/13] of: add vendor prefix for boe
@ 2015-11-03  2:24     ` Rob Herring
  0 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2015-11-03  2:24 UTC (permalink / raw)
  To: Chris Zhong
  Cc: Heiko Stübner, open list:ARM/Rockchip SoC...,
	devicetree, Arnd Bergmann, Thierry Reding, linux-kernel,
	Philipp Zabel, Kumar Gala, Kuninori Morimoto, Ian Campbell,
	Arnaud Ebalard, Antony Pavlov, Pawel Moll, Mark Rutland,
	Jonathan Cameron

On Sat, Oct 31, 2015 at 7:56 AM, Chris Zhong <zyw@rock-chips.com> wrote:
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>

Acked-by: Rob Herring <robh@kernel.org>

> ---
>
> Changes in v2:
> add vendor prefix for boe
>
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 8fb0590..404b798 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -33,6 +33,7 @@ auo   AU Optronics Corporation
>  avago  Avago Technologies
>  avic   Shanghai AVIC Optoelectronics Co., Ltd.
>  axis   Axis Communications AB
> +boe    BOE Technology Group Co., Ltd.
>  bosch  Bosch Sensortec GmbH
>  boundary       Boundary Devices Inc.
>  brcm   Broadcom Corporation
> --
> 2.6.2
>

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v2 10/13] of: add vendor prefix for boe
@ 2015-11-03  2:24     ` Rob Herring
  0 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2015-11-03  2:24 UTC (permalink / raw)
  To: Chris Zhong
  Cc: Heiko Stübner, open list:ARM/Rockchip SoC...,
	devicetree-u79uwXL29TY76Z2rM5mHXA, Arnd Bergmann, Thierry Reding,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Philipp Zabel, Kumar Gala,
	Kuninori Morimoto, Ian Campbell, Arnaud Ebalard, Antony Pavlov,
	Pawel Moll, Mark Rutland, Jonathan Cameron

On Sat, Oct 31, 2015 at 7:56 AM, Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

> ---
>
> Changes in v2:
> add vendor prefix for boe
>
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 8fb0590..404b798 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -33,6 +33,7 @@ auo   AU Optronics Corporation
>  avago  Avago Technologies
>  avic   Shanghai AVIC Optoelectronics Co., Ltd.
>  axis   Axis Communications AB
> +boe    BOE Technology Group Co., Ltd.
>  bosch  Bosch Sensortec GmbH
>  boundary       Boundary Devices Inc.
>  brcm   Broadcom Corporation
> --
> 2.6.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v2 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  2015-10-31 12:56   ` Chris Zhong
@ 2015-11-06  2:18     ` Rob Herring
  -1 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2015-11-06  2:18 UTC (permalink / raw)
  To: Chris Zhong
  Cc: heiko, linux-rockchip, devicetree, Kumar Gala, linux-kernel,
	Ian Campbell, Pawel Moll, Mark Rutland, linux-arm-kernel

On Sat, Oct 31, 2015 at 08:56:04PM +0800, Chris Zhong wrote:
> add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver
> 
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> ---
> 
> Changes in v2: None
> 
>  .../bindings/video/dw_mipi_dsi_rockchip.txt        | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
> new file mode 100644
> index 0000000..4dea804
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt

Please move to bindings/display/rockchip/


> @@ -0,0 +1,56 @@
> +Rockchip specific extensions to the Synopsys Designware MIPI DSI
> +================================
> +
> +Required properties:
> +- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
> +- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
> +- ports: contain a port node with endpoint definitions as defined in [1].
> +  For vopb,set the reg = <0> and set the reg = <1> for vopl.
> +
> +For more required properties, please refer to [2].
> +
> +[1] Documentation/devicetree/bindings/media/video-interfaces.txt
> +[2] Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt

This needs to be updated too.

> +
> +Example:
> +	mipi_dsi: mipi@ff960000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
> +		reg = <0xff960000 0x4000>;
> +		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
> +		clock-names = "ref", "pclk";
> +		rockchip,grf = <&grf>;
> +		status = "okay";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			mipi_in: port {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				mipi_in_vopb: endpoint@0 {
> +					reg = <0>;
> +					remote-endpoint = <&vopb_out_mipi>;
> +				};
> +				mipi_in_vopl: endpoint@1 {
> +					reg = <1>;
> +					remote-endpoint = <&vopl_out_mipi>;
> +				};
> +			};
> +		};
> +
> +		panel {
> +			compatible ="boe,tv080wum-nl0";
> +			reg = <0>;
> +
> +			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&lcd_en>;
> +			backlight = <&backlight>;
> +			status = "okay";
> +		};
> +	};
> -- 
> 2.6.2
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* [PATCH v2 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
@ 2015-11-06  2:18     ` Rob Herring
  0 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2015-11-06  2:18 UTC (permalink / raw)
  To: linux-arm-kernel

On Sat, Oct 31, 2015 at 08:56:04PM +0800, Chris Zhong wrote:
> add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver
> 
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> ---
> 
> Changes in v2: None
> 
>  .../bindings/video/dw_mipi_dsi_rockchip.txt        | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
> new file mode 100644
> index 0000000..4dea804
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt

Please move to bindings/display/rockchip/


> @@ -0,0 +1,56 @@
> +Rockchip specific extensions to the Synopsys Designware MIPI DSI
> +================================
> +
> +Required properties:
> +- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
> +- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
> +- ports: contain a port node with endpoint definitions as defined in [1].
> +  For vopb,set the reg = <0> and set the reg = <1> for vopl.
> +
> +For more required properties, please refer to [2].
> +
> +[1] Documentation/devicetree/bindings/media/video-interfaces.txt
> +[2] Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt

This needs to be updated too.

> +
> +Example:
> +	mipi_dsi: mipi at ff960000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
> +		reg = <0xff960000 0x4000>;
> +		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
> +		clock-names = "ref", "pclk";
> +		rockchip,grf = <&grf>;
> +		status = "okay";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			mipi_in: port {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				mipi_in_vopb: endpoint at 0 {
> +					reg = <0>;
> +					remote-endpoint = <&vopb_out_mipi>;
> +				};
> +				mipi_in_vopl: endpoint at 1 {
> +					reg = <1>;
> +					remote-endpoint = <&vopl_out_mipi>;
> +				};
> +			};
> +		};
> +
> +		panel {
> +			compatible ="boe,tv080wum-nl0";
> +			reg = <0>;
> +
> +			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&lcd_en>;
> +			backlight = <&backlight>;
> +			status = "okay";
> +		};
> +	};
> -- 
> 2.6.2
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v2 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver
@ 2015-11-06  2:21     ` Rob Herring
  0 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2015-11-06  2:21 UTC (permalink / raw)
  To: Chris Zhong
  Cc: heiko, linux-rockchip, Liu Ying, devicetree, Kumar Gala,
	linux-kernel, Ian Campbell, Pawel Moll, Mark Rutland

On Sat, Oct 31, 2015 at 08:56:01PM +0800, Chris Zhong wrote:
> From: Liu Ying <Ying.liu@freescale.com>
> 
> This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
> host controller DRM bridge driver.
> 
> Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> ---
> 
> Changes in v2: None
> 
>  .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt | 76 ++++++++++++++++++++++

Move to bindings/display/bridge/

>  1 file changed, 76 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
> 
> diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
> new file mode 100644
> index 0000000..bb87466
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
> @@ -0,0 +1,76 @@
> +Device-Tree bindings for Synopsys DesignWare MIPI DSI host controller
> +
> +The controller is a digital core that implements all protocol functions
> +defined in the MIPI DSI specification, providing an interface between
> +the system and the MIPI DPHY, and allowing communication with a MIPI DSI
> +compliant display.
> +
> +Required properties:
> + - #address-cells: Should be <1>.
> + - #size-cells: Should be <0>.
> + - compatible: The first compatible string should be "fsl,imx6q-mipi-dsi"
> +   for i.MX6q/sdl SoCs.  For other SoCs, please refer to their specific
> +   device tree binding documentations.  A common compatible string
> +   "snps,dw-mipi-dsi" should be appended for all SoCs.
> + - reg: Represent the physical address range of the controller.
> + - interrupts: Represent the controller's interrupt to the CPU(s).
> + - clocks, clock-names: Phandles to the controller's pll reference
> +   clock(ref), configuration clock(cfg) and APB clock(pclk), as
> +   described in [1].
> +
> +For more required properties, please refer to relevant device tree binding
> +documentations which describe the controller embedded in specific SoCs.
> +
> +Required sub-nodes:
> + - A node to represent a DSI peripheral as described in [2].
> +
> +For more required sub-nodes, please refer to relevant device tree binding
> +documentations which describe the controller embedded in specific SoCs.
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt

This is now in bindings/display/mipi-dsi-bus.txt

> +
> +example:
> +	gpr: iomuxc-gpr@020e0000 {
> +		/* ... */
> +	};
> +
> +	mipi_dsi: mipi@021e0000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
> +		reg = <0x021e0000 0x4000>;
> +		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
> +		gpr = <&gpr>;
> +		clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
> +			 <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
> +			 <&clks IMX6QDL_CLK_MIPI_IPG>;
> +		clock-names = "ref", "cfg", "pclk";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				mipi_mux_0: endpoint {
> +					remote-endpoint = <&ipu1_di0_mipi>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +
> +				mipi_mux_1: endpoint {
> +					remote-endpoint = <&ipu1_di1_mipi>;
> +				};
> +			};
> +		};
> +
> +		panel {
> +			compatible = "truly,tft480800-16-e-dsi";
> +			reg = <0>;
> +			/* ... */
> +		};
> +	};
> -- 
> 2.6.2
> 

^ permalink raw reply	[flat|nested] 35+ messages in thread

* Re: [PATCH v2 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver
@ 2015-11-06  2:21     ` Rob Herring
  0 siblings, 0 replies; 35+ messages in thread
From: Rob Herring @ 2015-11-06  2:21 UTC (permalink / raw)
  To: Chris Zhong
  Cc: heiko-4mtYJXux2i+zQB+pC5nmwQ,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Liu Ying,
	devicetree-u79uwXL29TY76Z2rM5mHXA, Kumar Gala,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Ian Campbell, Pawel Moll,
	Mark Rutland

On Sat, Oct 31, 2015 at 08:56:01PM +0800, Chris Zhong wrote:
> From: Liu Ying <Ying.liu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> 
> This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
> host controller DRM bridge driver.
> 
> Signed-off-by: Liu Ying <Ying.Liu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
> 
> Changes in v2: None
> 
>  .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt | 76 ++++++++++++++++++++++

Move to bindings/display/bridge/

>  1 file changed, 76 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
> 
> diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
> new file mode 100644
> index 0000000..bb87466
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
> @@ -0,0 +1,76 @@
> +Device-Tree bindings for Synopsys DesignWare MIPI DSI host controller
> +
> +The controller is a digital core that implements all protocol functions
> +defined in the MIPI DSI specification, providing an interface between
> +the system and the MIPI DPHY, and allowing communication with a MIPI DSI
> +compliant display.
> +
> +Required properties:
> + - #address-cells: Should be <1>.
> + - #size-cells: Should be <0>.
> + - compatible: The first compatible string should be "fsl,imx6q-mipi-dsi"
> +   for i.MX6q/sdl SoCs.  For other SoCs, please refer to their specific
> +   device tree binding documentations.  A common compatible string
> +   "snps,dw-mipi-dsi" should be appended for all SoCs.
> + - reg: Represent the physical address range of the controller.
> + - interrupts: Represent the controller's interrupt to the CPU(s).
> + - clocks, clock-names: Phandles to the controller's pll reference
> +   clock(ref), configuration clock(cfg) and APB clock(pclk), as
> +   described in [1].
> +
> +For more required properties, please refer to relevant device tree binding
> +documentations which describe the controller embedded in specific SoCs.
> +
> +Required sub-nodes:
> + - A node to represent a DSI peripheral as described in [2].
> +
> +For more required sub-nodes, please refer to relevant device tree binding
> +documentations which describe the controller embedded in specific SoCs.
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt

This is now in bindings/display/mipi-dsi-bus.txt

> +
> +example:
> +	gpr: iomuxc-gpr@020e0000 {
> +		/* ... */
> +	};
> +
> +	mipi_dsi: mipi@021e0000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
> +		reg = <0x021e0000 0x4000>;
> +		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
> +		gpr = <&gpr>;
> +		clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
> +			 <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
> +			 <&clks IMX6QDL_CLK_MIPI_IPG>;
> +		clock-names = "ref", "cfg", "pclk";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				mipi_mux_0: endpoint {
> +					remote-endpoint = <&ipu1_di0_mipi>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +
> +				mipi_mux_1: endpoint {
> +					remote-endpoint = <&ipu1_di1_mipi>;
> +				};
> +			};
> +		};
> +
> +		panel {
> +			compatible = "truly,tft480800-16-e-dsi";
> +			reg = <0>;
> +			/* ... */
> +		};
> +	};
> -- 
> 2.6.2
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 35+ messages in thread

end of thread, other threads:[~2015-11-06  2:21 UTC | newest]

Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-10-31 12:55 [PATCH v2 00/13] Add mipi dsi support for rk3288 Chris Zhong
2015-10-31 12:55 ` Chris Zhong
2015-10-31 12:55 ` Chris Zhong
2015-10-31 12:55 ` [PATCH v2 01/13] clk: rockchip: add id for mipidsi sclk on rk3288 Chris Zhong
2015-10-31 12:55 ` [PATCH v2 02/13] clk: rockchip: add mipidsi clocks " Chris Zhong
2015-10-31 12:55   ` Chris Zhong
2015-10-31 12:55 ` [PATCH v2 03/13] drm/rockchip: return a true clock rate to adjusted_mode Chris Zhong
2015-10-31 12:55   ` Chris Zhong
2015-10-31 12:56 ` [PATCH v2 04/13] drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format Chris Zhong
2015-10-31 12:56   ` Chris Zhong
2015-10-31 12:56 ` [PATCH v2 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver Chris Zhong
2015-11-06  2:21   ` Rob Herring
2015-11-06  2:21     ` Rob Herring
2015-10-31 12:56 ` [PATCH v2 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver Chris Zhong
2015-10-31 12:56 ` [PATCH v2 07/13] drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller Chris Zhong
2015-10-31 12:56   ` Chris Zhong
2015-10-31 12:56 ` [PATCH v2 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver Chris Zhong
2015-10-31 12:56   ` Chris Zhong
2015-11-06  2:18   ` Rob Herring
2015-11-06  2:18     ` Rob Herring
2015-10-31 12:56 ` [PATCH v2 09/13] ARM: dts: rockchip: add rk3288 mipi_dsi nodes Chris Zhong
2015-10-31 12:56   ` Chris Zhong
2015-10-31 12:56   ` Chris Zhong
2015-10-31 12:56 ` [PATCH v2 10/13] of: add vendor prefix for boe Chris Zhong
2015-11-03  2:24   ` Rob Herring
2015-11-03  2:24     ` Rob Herring
2015-10-31 12:56 ` [PATCH v2 11/13] drm/panel: simple: Add support for BOE TV080WUM-NL0 Chris Zhong
2015-10-31 12:56 ` [PATCH v2 12/13] drm/panel: simple: Add simple panel device tree binding Chris Zhong
2015-10-31 12:56   ` Chris Zhong
2015-11-02 15:06   ` Rob Herring
2015-11-02 15:06     ` Rob Herring
2015-11-03  0:28     ` Chris Zhong
2015-11-03  0:28       ` Chris Zhong
2015-10-31 12:56 ` [PATCH v2 13/13] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb Chris Zhong
2015-10-31 12:56   ` Chris Zhong

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.