From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Tue, 17 Nov 2015 11:23:46 +0100 Subject: [U-Boot] u-boot device model SPI + SPI Flash In-Reply-To: References: <7ccbb9ae7fdb4663832167baa173d6b8@LysExc01.nanotronic.local> <0af28a07c7704451be0aa3fce01764d0@LysExc01.nanotronic.local> <320637582ef942f0b71a55d692d254e5@LysExc01.nanotronic.local> <7a85439a92f64a71a5f2b08b3fdc4576@LysExc01.nanotronic.local> <562E2FEE.60605@xilinx.com> <562F61EA.5080303@xilinx.com> <562F8F1A.4050903@xilinx.com> <5631D75E.2000402@xilinx.com> <4a9b0987ae1047fdb9bd0e84160400ac@LysExc01.nanotronic.local> <5639F451.1090501@xilinx.com> <7d9fad7ec38548d4854dc5094a7e0c42@LysExc01.nanotronic.local> <563B734D.2010902@xilinx.com> Message-ID: <564B0032.8030106@xilinx.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, On 17.11.2015 11:17, Hoefle Marco wrote: > Hello Michal, hello Jagan, > for me the Microblaze SPI port in mainline u-boot does not work with DM. > I used Michal's files and modified the addresses and changed Full Ethernet to Ethernet lite and uart to uartlite to match the hardware here. This was not a big step as both Hardware configurations are very similar. > The changes between v2016.01-rc1 and the changed/added files are attached as patch. > > Still the same error: > U-Boot 2016.01--95f642905f8dd7c07ac9f5ed49fe14291ab1fb15---00002-g95f6429-dirty (Nov 17 2015 - 10:57:55 +0100) > > DRAM: 256 MiB > Invalid bus 0 (err=-19) > *** Warning - spi_flash_probe() failed, using default environment is this u-boot with my DTB or yours? It is not visible if this is dtb which you use in your config. Definitely check that dtb you use setup aliases. Thanks, Michal