From mboxrd@z Thu Jan 1 00:00:00 1970 From: Libin Yang Subject: Re: [PATCH v4 4/5] ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug Date: Wed, 16 Dec 2015 15:47:04 +0800 Message-ID: <567116F8.70705@linux.intel.com> References: <1450244565-77041-1-git-send-email-libin.yang@linux.intel.com> <1450244565-77041-5-git-send-email-libin.yang@linux.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: Received: from mga01.intel.com (mga01.intel.com [192.55.52.88]) by alsa0.perex.cz (Postfix) with ESMTP id 9B49826517F for ; Wed, 16 Dec 2015 08:49:36 +0100 (CET) In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Takashi Iwai Cc: libin.yang@intel.com, mengdong.lin@intel.com, alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org On 12/16/2015 03:43 PM, Takashi Iwai wrote: > On Wed, 16 Dec 2015 06:42:44 +0100, > libin.yang@linux.intel.com wrote: >> >> From: Libin Yang >> >> Dynamically bind/unbind the PCM to pin when HDMI/DP monitor hotplug. >> >> When monitor is connected, find a proper PCM for the monitor. >> When monitor is disconnected, unbind the PCM from the pin. >> >> The binding policy (use Intel platform as example) is: >> 1. Try to use the legacy pin-pcm mapping for the device entry 0 >> of the pin. >> 2. If step 1 fails, try to bind pin to the backup PCMs. For example, >> on Intel platform, if DP MST is enabled, 5 PCMs will be created. >> PCM 3, PCM 7, PCM 8 are supposed to be used by device entry 0 of >> pin 5, pin 6 and pin 7. PCM 9 and PCM 10 are the backup PCMs. >> 3. If step 2 fails, try to find any PCM to bind to the pin. >> >> Signed-off-by: Libin Yang > > This patch adds the code in sync_eld_via_acomp(), i.e. it's handled > only with component. As the dynamic HDA attach/detach itself is > agnostic to the component, I'd suggest to put this rather in > update_eld(). > > Also pcm_lock can be put in hdmi_present_sense() to wrap both > sync_eld_via_acomp() and hdmi_present_sense_via_verbs(). OK, I will put it in update_eld(). Best Regards, Libin > > > Takashi > >> --- >> sound/pci/hda/patch_hdmi.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 73 insertions(+) >> >> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c >> index 19bf782..10edab8 100644 >> --- a/sound/pci/hda/patch_hdmi.c >> +++ b/sound/pci/hda/patch_hdmi.c >> @@ -73,6 +73,8 @@ struct hdmi_spec_per_cvt { >> >> struct hdmi_spec_per_pin { >> hda_nid_t pin_nid; >> + /* pin idx, different device entries on the same pin use the same idx */ >> + int pin_nid_idx; >> int num_mux_nids; >> hda_nid_t mux_nids[HDA_MAX_CONNECTIONS]; >> int mux_idx; >> @@ -85,6 +87,7 @@ struct hdmi_spec_per_pin { >> struct snd_kcontrol *eld_ctl; >> struct snd_jack *acomp_jack; /* jack via audio component */ >> struct hda_pcm *pcm; /* pointer to spec->pcm_rec[n] dynamically*/ >> + int pcm_idx; /* which pcm is attached. -1 means no pcm is attached */ >> int repoll_count; >> bool setup; /* the stream has been set up by prepare callback */ >> int channels; /* current number of channels */ >> @@ -138,6 +141,8 @@ struct hdmi_spec { >> struct snd_array pins; /* struct hdmi_spec_per_pin */ >> struct hda_pcm *pcm_rec[16]; >> struct mutex pcm_lock; >> + /* pcm_bitmap means which pcms have been assigned to pins*/ >> + unsigned long pcm_bitmap; >> int pcm_used; /* counter of pcm_rec[] */ >> unsigned int channels_max; /* max over all cvts */ >> >> @@ -1786,6 +1791,60 @@ static bool hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin, >> return ret; >> } >> >> +static int hdmi_find_pcm_slot(struct hdmi_spec *spec, >> + struct hdmi_spec_per_pin *per_pin) >> +{ >> + int i; >> + >> + /* try the prefer PCM */ >> + if (!test_bit(per_pin->pin_nid_idx, &spec->pcm_bitmap)) >> + return per_pin->pin_nid_idx; >> + >> + /* have a second try; check the "reserved area" over num_pins */ >> + for (i = spec->num_pins; i < spec->pcm_used; i++) { >> + if (!test_bit(i, &spec->pcm_bitmap)) >> + return i; >> + } >> + >> + /* the last try; check the empty slots in pins */ >> + for (i = 0; i < spec->num_pins; i++) { >> + if (!test_bit(i, &spec->pcm_bitmap)) >> + return i; >> + } >> + return -EBUSY; >> +} >> + >> +static void hdmi_attach_hda_pcm(struct hdmi_spec *spec, >> + struct hdmi_spec_per_pin *per_pin) >> +{ >> + int idx; >> + >> + /* pcm already be attached to the pin */ >> + if (per_pin->pcm) >> + return; >> + idx = hdmi_find_pcm_slot(spec, per_pin); >> + if (idx == -ENODEV) >> + return; >> + per_pin->pcm_idx = idx; >> + per_pin->pcm = spec->pcm_rec[idx]; >> + set_bit(idx, &spec->pcm_bitmap); >> +} >> + >> +static void hdmi_detach_hda_pcm(struct hdmi_spec *spec, >> + struct hdmi_spec_per_pin *per_pin) >> +{ >> + int idx; >> + >> + /* pcm already be detached from the pin */ >> + if (!per_pin->pcm) >> + return; >> + idx = per_pin->pcm_idx; >> + per_pin->pcm_idx = -1; >> + per_pin->pcm = NULL; >> + if (idx >= 0 && idx < spec->pcm_used) >> + clear_bit(idx, &spec->pcm_bitmap); >> +} >> + >> /* update ELD and jack state via audio component */ >> static void sync_eld_via_acomp(struct hda_codec *codec, >> struct hdmi_spec_per_pin *per_pin) >> @@ -1794,6 +1853,7 @@ static void sync_eld_via_acomp(struct hda_codec *codec, >> struct hdmi_eld *eld = &spec->temp_eld; >> int size; >> >> + mutex_lock(&spec->pcm_lock); >> mutex_lock(&per_pin->lock); >> size = snd_hdac_acomp_get_eld(&codec->bus->core, per_pin->pin_nid, >> &eld->monitor_present, eld->eld_buffer, >> @@ -1815,11 +1875,19 @@ static void sync_eld_via_acomp(struct hda_codec *codec, >> eld->eld_size = 0; >> } >> >> + if (spec->dyn_pcm_assign) { >> + if (eld->eld_valid) >> + hdmi_attach_hda_pcm(spec, per_pin); >> + else >> + hdmi_detach_hda_pcm(spec, per_pin); >> + } >> + >> update_eld(codec, per_pin, eld); >> snd_jack_report(per_pin->acomp_jack, >> eld->monitor_present ? SND_JACK_AVOUT : 0); >> unlock: >> mutex_unlock(&per_pin->lock); >> + mutex_unlock(&spec->pcm_lock); >> } >> >> static bool hdmi_present_sense(struct hdmi_spec_per_pin *per_pin, int repoll) >> @@ -1875,6 +1943,11 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) >> >> per_pin->pin_nid = pin_nid; >> per_pin->non_pcm = false; >> + if (spec->dyn_pcm_assign) >> + per_pin->pcm_idx = -1; >> + else >> + per_pin->pcm_idx = pin_idx; >> + per_pin->pin_nid_idx = pin_idx; >> >> err = hdmi_read_pin_conn(codec, pin_idx); >> if (err < 0) >> -- >> 1.9.1 >>