From: Julian Margetson <runaway@candw.ms>
To: "Måns Rullgård" <mans@mansr.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Tejun Heo <tj@kernel.org>,
linux-ide@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
Date: Sun, 20 Dec 2015 13:44:38 -0400 [thread overview]
Message-ID: <5676E906.1060603@candw.ms> (raw)
In-Reply-To: <yw1xy4cp6o4o.fsf@unicorn.mansr.com>
[-- Attachment #1: Type: text/plain, Size: 2802 bytes --]
On 12/20/2015 1:11 PM, Måns Rullgård wrote:
> Julian Margetson <runaway@candw.ms> writes:
>
>> On 12/19/2015 4:41 PM, Måns Rullgård wrote:
>>> Andy Shevchenko <andy.shevchenko@gmail.com> writes:
>>>
>>>> On Sat, Dec 19, 2015 at 10:16 PM, Julian Margetson <runaway@candw.ms> wrote:
>>>>> On 12/19/2015 3:07 PM, Måns Rullgård wrote:
>>>>>> Julian Margetson <runaway@candw.ms> writes:
>>>>>>> Total pages: 522752
>>>>>>> [ 0.000000] Kernel command line: root=/dev/sda8 console=ttyS0,115200
>>>>>>> console=tty1 dw_dmac_core.dyndbg dw_dmac.dyndbg
>>>>>> Please add ignore_log_level.
>>>>>>
>>>>> Had to truncate the kernel command line to add it.
>>>> I guess Måns meant 'ignore_loglevel'
>>> Obviously. I can never remember where the underscores go.
>> [ 18.362244] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>> [ 18.372454] sd 3:0:0:0: Attached scsi generic sg3 type 0
>> [ 18.405433] sd 3:0:0:0: [sdc] Write Protect is off
>> [ 18.420654] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>> [ 18.461731] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>> [ 18.502918] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
>> [ 18.511807] dma dma0chan0: dwc_prep_slave_sg
>> [ 18.516083] dma dma0chan0: scanned 1 descriptors on freelist
>> [ 18.521753] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xedeaa800, count: 1 addr: 0xfffffffff6a14400
>> [ 18.531327] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue: tag=0 ap->link.sactive = 0x00000001 sactive=0x00000001
>> [ 18.541359] sata-dwc 4bffd1000.sata: sata_dwc_exec_command_by_tag cmd(0x60): READ FPDMA QUEUED tag=0
>> [ 18.553703] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x00000082 active_tag=-84148995
>> [ 18.561717] sata-dwc 4bffd1000.sata: sata_dwc_isr: NEWFP tag=0
>> [ 18.567561] sata-dwc 4bffd1000.sata: sata_dwc_bmdma_start_by_tag qc=ed2340b8 tag: 0 cmd: 0x60 dma_dir: from device start_dma? 1
>> [ 18.579043] sata-dwc 4bffd1000.sata: taskfile cmd: 0x60 protocol: ATA NCQ flags: 0x17 device: 40
>> [ 18.587836] sata-dwc 4bffd1000.sata: feature: 0x08 nsect: 0x0 lbal: 0x0 lbam: 0x0 lbah: 0x0
>> [ 18.596196] sata-dwc 4bffd1000.sata: hob_feature: 0x00 hob_nsect: 0x0 hob_lbal: 0x0 hob_lbam: 0x0 hob_lbah: 0x0
>> [ 18.606292] dma dma0chan0: dwc_tx_submit: queued 2
>> [ 18.611091] dma dma0chan0: dwc_dostart_first_queued: started 2
>> [ 48.748614] ata3: lost interrupt (Status 0x40)
> Now we're getting somewhere. The dma transfer is set up and initiated,
> but then nothing happens. Comparing the old sata_dwc driver, from
> before the switch to dmaengine, with the dw_dma driver, I noticed an
> obvious problem: the descriptors are filled in using the wrong byte
> order. This patch might fix that.
>
[-- Attachment #2: Log.log --]
[-- Type: text/plain, Size: 147627 bytes --]
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.12.20 13:32:57 =~=~=~=~=~=~=~=~=~=~=~=
U-Boot 2015.a (May 16 2015 - 14:20:11)
CPU: AMCC PowerPC 460EX Rev. B at 1155 MHz (PLB=231 OPB=115 EBC=115)
No Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter enabled
32 kB I-Cache 32 kB D-Cache
Board: Sam460ex/cr, PCIe 4x + SATA-2
I2C: ready
DRAM: 2 GiB (ECC not enabled, 462 MHz, CL4)
PCI: Bus Dev VenId DevId Class Int
00 04 1095 3512 0104 00
00 06 126f 0501 0380 00
PCIE1: successfully set as root-complex
02 00 1002 683f 0300 ff
Net: ppc_4xx_eth0
FPGA: Revision 03 (2010-10-07)
SM502: found
PERMD2:not found
VGA: 1
VESA: OK
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.4.0-rc5-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #3 PREEMPT Sun Dec 20 13:24:01 AST 2015
[ 0.000000] Found legacy serial port 0 for /plb/opb/serial@ef600300
[ 0.000000] mem=4ef600300, taddr=4ef600300, irq=0, clk=11059200, speed=0
[ 0.000000] Found legacy serial port 1 for /plb/opb/serial@ef600400
[ 0.000000] mem=4ef600400, taddr=4ef600400, irq=0, clk=11059200, speed=0
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] free_area_init_node: node 0, pgdat c0a33dc8, node_mem_map eefed000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 327680 pages, LIFO batch:31
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sda8 console=ttyS0,115200 ignore_loglevel dw_dmac_core.dyndbg dw_dmac.dyndbg
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2068868K/2097152K available (6732K kernel code, 332K rwdata, 3232K rodata, 236K init, 368K bss, 28284K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000000] time_init: decrementer frequency = 1155.000010 MHz
[ 0.000000] time_init: processor frequency = 1155.000010 MHz
[ 0.000013] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000024] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000035] clockevent: decrementer mult[93d70a53] shift[31] cpu[0]
[ 0.000146] Console: colour dummy device 80x25
[ 0.000175] pid_max: default: 32768 minimum: 301
[ 0.000276] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000288] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004011] devtmpfs: initialized
[ 0.006749] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.007137] xor: measuring software checksum speed
[ 0.016346] 8regs : 856.000 MB/sec
[ 0.026354] 8regs_prefetch: 784.000 MB/sec
[ 0.036385] 32regs : 1120.000 MB/sec
[ 0.046418] 32regs_prefetch: 996.000 MB/sec
[ 0.046424] xor: using function: 32regs (1120.000 MB/sec)
[ 0.046459] prandom: seed boundary self test passed
[ 0.048905] prandom: 100 self tests passed
[ 0.049444] NET: Registered protocol family 16
[ 0.052544] cpuidle: using governor ladder
[ 0.055577] cpuidle: using governor menu
[ 0.055978] 256k L2-cache enabled
[ 0.056063] PCIE0: Port disabled via device-tree
[ 0.056114] PCIE1: Checking link...
[ 0.056120] PCIE1: Device detected, waiting for link...
[ 0.056126] PCIE1: link is up !
[ 0.158410] PCI host bridge /plb/pciex@d20000000 (primary) ranges:
[ 0.158437] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.158453] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.158463] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.158486] 4xx PCI DMA offset set to 0x00000000
[ 0.158492] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158498] DMA window size 0x0000000080000000
[ 0.158522] PCIE1: successfully set as root-complex
[ 0.158588] PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
[ 0.158604] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.158618] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.158629] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.158643] 4xx PCI DMA offset set to 0x00000000
[ 0.158648] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158654] DMA window size 0x0000000080000000
[ 0.159140] PCI: Probing PCI hardware
[ 0.159241] PCI host bridge to bus 0000:80
[ 0.159259] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.159273] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.159285] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.159298] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.159312] pci_bus 0000:80: busn_res: [bus 80-ff] end is updated to ff
[ 0.159349] pci 0000:80:00.0: [aaa1:bed1] type 01 class 0x060400
[ 0.159389] pci 0000:80:00.0: reg 0x10: [mem 0x00000000-0x7fffffff pref]
[ 0.159421] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.159695] pci 0000:81:00.0: [1002:683f] type 00 class 0x030000
[ 0.159746] pci 0000:81:00.0: reg 0x10: [mem 0xea0000000-0xeafffffff 64bit pref]
[ 0.159767] pci 0000:81:00.0: reg 0x18: [mem 0xeb0000000-0xeb003ffff 64bit]
[ 0.159782] pci 0000:81:00.0: reg 0x20: [io 0xfffe2000-0xfffe20ff]
[ 0.159805] pci 0000:81:00.0: reg 0x30: [mem 0xf00100000-0xf0011ffff pref]
[ 0.159868] pci 0000:81:00.0: supports D1 D2
[ 0.159878] pci 0000:81:00.0: PME# supported from D1 D2 D3hot
[ 0.160029] pci 0000:81:00.1: [1002:aab0] type 00 class 0x040300
[ 0.160078] pci 0000:81:00.1: reg 0x10: [mem 0xf00100000-0xf00103fff 64bit]
[ 0.160161] pci 0000:81:00.1: supports D1 D2
[ 0.160286] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.160302] pci 0000:80:00.0: bridge window [io 0xfffe2000-0xfffe2fff]
[ 0.160314] pci 0000:80:00.0: bridge window [mem 0xea0000000-0xeb00fffff]
[ 0.160401] pci_bus 0000:80: busn_res: [bus 80-ff] end is updated to bf
[ 0.160493] PCI host bridge to bus 0001:00
[ 0.160507] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.160519] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.160531] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.160542] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.160553] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.160581] pci 0001:00:04.0: [1095:3512] type 00 class 0x010400
[ 0.160604] pci 0001:00:04.0: reg 0x10: [io 0x1000-0x1007]
[ 0.160617] pci 0001:00:04.0: reg 0x14: [io 0x1008-0x100b]
[ 0.160629] pci 0001:00:04.0: reg 0x18: [io 0x1010-0x1017]
[ 0.160642] pci 0001:00:04.0: reg 0x1c: [io 0x1018-0x101b]
[ 0.160654] pci 0001:00:04.0: reg 0x20: [io 0x1020-0x102f]
[ 0.160667] pci 0001:00:04.0: reg 0x24: [mem 0xd80000000-0xd800001ff]
[ 0.160680] pci 0001:00:04.0: reg 0x30: [mem 0xc0ee00000-0xc0ee7ffff pref]
[ 0.160706] pci 0001:00:04.0: supports D1 D2
[ 0.160827] pci 0001:00:06.0: [126f:0501] type 00 class 0x038000
[ 0.160851] pci 0001:00:06.0: reg 0x10: [mem 0xd84000000-0xd87ffffff]
[ 0.160863] pci 0001:00:06.0: reg 0x14: [mem 0xd88000000-0xd881fffff]
[ 0.160899] pci 0001:00:06.0: supports D1 D2
[ 0.161076] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.161167] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161179] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.161190] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.161206] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161227] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.161245] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.161257] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.161274] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.161287] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.161298] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.161309] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.161320] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161333] pci_bus 0000:80: resource 4 [io 0xfffe0000-0xfffeffff]
[ 0.161343] pci_bus 0000:80: resource 5 [mem 0xe80000000-0xeffffffff]
[ 0.161353] pci_bus 0000:80: resource 6 [mem 0xf00100000-0xf001fffff]
[ 0.161363] pci_bus 0000:81: resource 0 [io 0xfffe1000-0xfffe1fff]
[ 0.161372] pci_bus 0000:81: resource 1 [mem 0xe90000000-0xe900fffff]
[ 0.161382] pci_bus 0000:81: resource 2 [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161397] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.161410] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.161423] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.161434] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.161445] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.161457] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.161468] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.161480] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.161492] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.161504] pci_bus 0001:00: resource 4 [io 0x0000-0xffff]
[ 0.161514] pci_bus 0001:00: resource 5 [mem 0xd80000000-0xdffffffff]
[ 0.161524] pci_bus 0001:00: resource 6 [mem 0xc0ee00000-0xc0eefffff]
[ 0.188262] raid6: int32x1 gen() 300 MB/s
[ 0.205415] raid6: int32x1 xor() 173 MB/s
[ 0.222442] raid6: int32x2 gen() 433 MB/s
[ 0.239489] raid6: int32x2 xor() 240 MB/s
[ 0.256581] raid6: int32x4 gen() 476 MB/s
[ 0.273660] raid6: int32x4 xor() 267 MB/s
[ 0.290716] raid6: int32x8 gen() 234 MB/s
[ 0.307887] raid6: int32x8 xor() 218 MB/s
[ 0.307894] raid6: using algorithm int32x4 gen() 476 MB/s
[ 0.307900] raid6: .... xor() 267 MB/s, rmw enabled
[ 0.307907] raid6: using intx1 recovery algorithm
[ 0.308205] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.308219] vgaarb: loaded
[ 0.308225] vgaarb: bridge control possible 0000:81:00.0
[ 0.308489] SCSI subsystem initialized
[ 0.308632] libata version 3.00 loaded.
[ 0.308870] usbcore: registered new interface driver usbfs
[ 0.308914] usbcore: registered new interface driver hub
[ 0.308968] usbcore: registered new device driver usb
[ 0.309064] pps_core: LinuxPPS API ver. 1 registered
[ 0.309071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.309098] PTP clock support registered
[ 0.309245] EDAC MC: Ver: 3.0.0
[ 0.309591] Advanced Linux Sound Architecture Driver Initialized.
[ 0.329536] DMA-API: preallocated 65536 debug entries
[ 0.329549] DMA-API: debugging enabled by kernel config
[ 0.329594] clocksource: Switched to clocksource timebase
[ 0.336215] NET: Registered protocol family 2
[ 0.336799] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.336894] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.337234] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.337345] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.337410] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.337757] NET: Registered protocol family 1
[ 0.338072] RPC: Registered named UNIX socket transport module.
[ 0.338081] RPC: Registered udp transport module.
[ 0.338087] RPC: Registered tcp transport module.
[ 0.338093] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338163] PCI: CLS mismatch (32 != 4), using 32 bytes
[ 0.338848] Could not remap bcsr
[ 0.342055] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.345037] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.355249] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.355793] fuse init (API version 7.23)
[ 0.359968] async_tx: api initialized (async)
[ 0.360067] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.360084] io scheduler noop registered
[ 0.360226] io scheduler cfq registered (default)
[ 0.362204] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.362214] crc32: self tests passed, processed 225944 bytes in 891814 nsec
[ 0.363231] crc32c: CRC_LE_BITS = 64
[ 0.363240] crc32c: self tests passed, processed 225944 bytes in 446500 nsec
[ 0.429692] crc32_combine: 8373 self tests passed
[ 0.496340] crc32c_combine: 8373 self tests passed
[ 0.496393] glob: 64 self-tests passed, 0 failed
[ 0.534682] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.535443] console [ttyS0] disabled
[ 0.555608] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.837753] console [ttyS0] enabled
[ 1.861879] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.871729] console [ttyS0] disabled
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.4.0-rc5-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #3 PREEMPT Sun Dec 20 13:24:01 AST 2015
[ 0.000000] Found legacy serial port 0 for /plb/opb/serial@ef600300
[ 0.000000] mem=4ef600300, taddr=4ef600300, irq=0, clk=11059200, speed=0
[ 0.000000] Found legacy serial port 1 for /plb/opb/serial@ef600400
[ 0.000000] mem=4ef600400, taddr=4ef600400, irq=0, clk=11059200, speed=0
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] free_area_init_node: node 0, pgdat c0a33dc8, node_mem_map eefed000
[ 0.000000] DMA zone: 1536 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 327680 pages, LIFO batch:31
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sda8 console=ttyS0,115200 ignore_loglevel dw_dmac_core.dyndbg dw_dmac.dyndbg
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2068868K/2097152K available (6732K kernel code, 332K rwdata, 3232K rodata, 236K init, 368K bss, 28284K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000000] time_init: decrementer frequency = 1155.000010 MHz
[ 0.000000] time_init: processor frequency = 1155.000010 MHz
[ 0.000013] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000024] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000035] clockevent: decrementer mult[93d70a53] shift[31] cpu[0]
[ 0.000146] Console: colour dummy device 80x25
[ 0.000175] pid_max: default: 32768 minimum: 301
[ 0.000276] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000288] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004011] devtmpfs: initialized
[ 0.006749] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.007137] xor: measuring software checksum speed
[ 0.016346] 8regs : 856.000 MB/sec
[ 0.026354] 8regs_prefetch: 784.000 MB/sec
[ 0.036385] 32regs : 1120.000 MB/sec
[ 0.046418] 32regs_prefetch: 996.000 MB/sec
[ 0.046424] xor: using function: 32regs (1120.000 MB/sec)
[ 0.046459] prandom: seed boundary self test passed
[ 0.048905] prandom: 100 self tests passed
[ 0.049444] NET: Registered protocol family 16
[ 0.052544] cpuidle: using governor ladder
[ 0.055577] cpuidle: using governor menu
[ 0.055978] 256k L2-cache enabled
[ 0.056063] PCIE0: Port disabled via device-tree
[ 0.056114] PCIE1: Checking link...
[ 0.056120] PCIE1: Device detected, waiting for link...
[ 0.056126] PCIE1: link is up !
[ 0.158410] PCI host bridge /plb/pciex@d20000000 (primary) ranges:
[ 0.158437] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.158453] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.158463] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.158486] 4xx PCI DMA offset set to 0x00000000
[ 0.158492] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158498] DMA window size 0x0000000080000000
[ 0.158522] PCIE1: successfully set as root-complex
[ 0.158588] PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
[ 0.158604] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.158618] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.158629] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.158643] 4xx PCI DMA offset set to 0x00000000
[ 0.158648] 4xx PCI DMA window base to 0x0000000000000000
[ 0.158654] DMA window size 0x0000000080000000
[ 0.159140] PCI: Probing PCI hardware
[ 0.159241] PCI host bridge to bus 0000:80
[ 0.159259] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.159273] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.159285] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.159298] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.159312] pci_bus 0000:80: busn_res: [bus 80-ff] end is updated to ff
[ 0.159349] pci 0000:80:00.0: [aaa1:bed1] type 01 class 0x060400
[ 0.159389] pci 0000:80:00.0: reg 0x10: [mem 0x00000000-0x7fffffff pref]
[ 0.159421] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.159695] pci 0000:81:00.0: [1002:683f] type 00 class 0x030000
[ 0.159746] pci 0000:81:00.0: reg 0x10: [mem 0xea0000000-0xeafffffff 64bit pref]
[ 0.159767] pci 0000:81:00.0: reg 0x18: [mem 0xeb0000000-0xeb003ffff 64bit]
[ 0.159782] pci 0000:81:00.0: reg 0x20: [io 0xfffe2000-0xfffe20ff]
[ 0.159805] pci 0000:81:00.0: reg 0x30: [mem 0xf00100000-0xf0011ffff pref]
[ 0.159868] pci 0000:81:00.0: supports D1 D2
[ 0.159878] pci 0000:81:00.0: PME# supported from D1 D2 D3hot
[ 0.160029] pci 0000:81:00.1: [1002:aab0] type 00 class 0x040300
[ 0.160078] pci 0000:81:00.1: reg 0x10: [mem 0xf00100000-0xf00103fff 64bit]
[ 0.160161] pci 0000:81:00.1: supports D1 D2
[ 0.160286] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.160302] pci 0000:80:00.0: bridge window [io 0xfffe2000-0xfffe2fff]
[ 0.160314] pci 0000:80:00.0: bridge window [mem 0xea0000000-0xeb00fffff]
[ 0.160401] pci_bus 0000:80: busn_res: [bus 80-ff] end is updated to bf
[ 0.160493] PCI host bridge to bus 0001:00
[ 0.160507] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.160519] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.160531] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.160542] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.160553] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.160581] pci 0001:00:04.0: [1095:3512] type 00 class 0x010400
[ 0.160604] pci 0001:00:04.0: reg 0x10: [io 0x1000-0x1007]
[ 0.160617] pci 0001:00:04.0: reg 0x14: [io 0x1008-0x100b]
[ 0.160629] pci 0001:00:04.0: reg 0x18: [io 0x1010-0x1017]
[ 0.160642] pci 0001:00:04.0: reg 0x1c: [io 0x1018-0x101b]
[ 0.160654] pci 0001:00:04.0: reg 0x20: [io 0x1020-0x102f]
[ 0.160667] pci 0001:00:04.0: reg 0x24: [mem 0xd80000000-0xd800001ff]
[ 0.160680] pci 0001:00:04.0: reg 0x30: [mem 0xc0ee00000-0xc0ee7ffff pref]
[ 0.160706] pci 0001:00:04.0: supports D1 D2
[ 0.160827] pci 0001:00:06.0: [126f:0501] type 00 class 0x038000
[ 0.160851] pci 0001:00:06.0: reg 0x10: [mem 0xd84000000-0xd87ffffff]
[ 0.160863] pci 0001:00:06.0: reg 0x14: [mem 0xd88000000-0xd881fffff]
[ 0.160899] pci 0001:00:06.0: supports D1 D2
[ 0.161076] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.161167] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161179] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.161190] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.161206] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161227] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.161245] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.161257] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.161274] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.161287] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.161298] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.161309] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.161320] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161333] pci_bus 0000:80: resource 4 [io 0xfffe0000-0xfffeffff]
[ 0.161343] pci_bus 0000:80: resource 5 [mem 0xe80000000-0xeffffffff]
[ 0.161353] pci_bus 0000:80: resource 6 [mem 0xf00100000-0xf001fffff]
[ 0.161363] pci_bus 0000:81: resource 0 [io 0xfffe1000-0xfffe1fff]
[ 0.161372] pci_bus 0000:81: resource 1 [mem 0xe90000000-0xe900fffff]
[ 0.161382] pci_bus 0000:81: resource 2 [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.161397] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.161410] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.161423] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.161434] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.161445] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.161457] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.161468] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.161480] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.161492] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.161504] pci_bus 0001:00: resource 4 [io 0x0000-0xffff]
[ 0.161514] pci_bus 0001:00: resource 5 [mem 0xd80000000-0xdffffffff]
[ 0.161524] pci_bus 0001:00: resource 6 [mem 0xc0ee00000-0xc0eefffff]
[ 0.188262] raid6: int32x1 gen() 300 MB/s
[ 0.205415] raid6: int32x1 xor() 173 MB/s
[ 0.222442] raid6: int32x2 gen() 433 MB/s
[ 0.239489] raid6: int32x2 xor() 240 MB/s
[ 0.256581] raid6: int32x4 gen() 476 MB/s
[ 0.273660] raid6: int32x4 xor() 267 MB/s
[ 0.290716] raid6: int32x8 gen() 234 MB/s
[ 0.307887] raid6: int32x8 xor() 218 MB/s
[ 0.307894] raid6: using algorithm int32x4 gen() 476 MB/s
[ 0.307900] raid6: .... xor() 267 MB/s, rmw enabled
[ 0.307907] raid6: using intx1 recovery algorithm
[ 0.308205] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.308219] vgaarb: loaded
[ 0.308225] vgaarb: bridge control possible 0000:81:00.0
[ 0.308489] SCSI subsystem initialized
[ 0.308632] libata version 3.00 loaded.
[ 0.308870] usbcore: registered new interface driver usbfs
[ 0.308914] usbcore: registered new interface driver hub
[ 0.308968] usbcore: registered new device driver usb
[ 0.309064] pps_core: LinuxPPS API ver. 1 registered
[ 0.309071] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.309098] PTP clock support registered
[ 0.309245] EDAC MC: Ver: 3.0.0
[ 0.309591] Advanced Linux Sound Architecture Driver Initialized.
[ 0.329536] DMA-API: preallocated 65536 debug entries
[ 0.329549] DMA-API: debugging enabled by kernel config
[ 0.329594] clocksource: Switched to clocksource timebase
[ 0.336215] NET: Registered protocol family 2
[ 0.336799] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.336894] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.337234] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.337345] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.337410] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.337757] NET: Registered protocol family 1
[ 0.338072] RPC: Registered named UNIX socket transport module.
[ 0.338081] RPC: Registered udp transport module.
[ 0.338087] RPC: Registered tcp transport module.
[ 0.338093] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338163] PCI: CLS mismatch (32 != 4), using 32 bytes
[ 0.338848] Could not remap bcsr
[ 0.342055] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.345037] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.355249] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.355793] fuse init (API version 7.23)
[ 0.359968] async_tx: api initialized (async)
[ 0.360067] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.360084] io scheduler noop registered
[ 0.360226] io scheduler cfq registered (default)
[ 0.362204] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.362214] crc32: self tests passed, processed 225944 bytes in 891814 nsec
[ 0.363231] crc32c: CRC_LE_BITS = 64
[ 0.363240] crc32c: self tests passed, processed 225944 bytes in 446500 nsec
[ 0.429692] crc32_combine: 8373 self tests passed
[ 0.496340] crc32c_combine: 8373 self tests passed
[ 0.496393] glob: 64 self-tests passed, 0 failed
[ 0.534682] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.535443] console [ttyS0] disabled
[ 0.555608] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.837753] console [ttyS0] enabled
[ 1.861879] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.871729] console [ttyS0] disabled
[ 1.875384] 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a 16550
[ 3.182362] console [ttyS0] enabled
[ 3.186477] 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a 16550
[ 3.195850] Generic non-volatile memory driver v1.1
[ 3.201000] [drm] Initialized drm 1.1.0 20060810
[ 3.205707] [drm] radeon kernel modesetting enabled.
[ 3.211406] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x1545:0x7750).
[ 3.219400] [drm] register mmio base: 0xe90000000
[ 3.224136] [drm] register mmio size: 262144
[ 3.560222] ATOM BIOS: C44501
[ 3.563457] radeon 0000:81:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 3.572366] radeon 0000:81:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 3.580032] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 3.584917] [drm] RAM width 128bits DDR
[ 3.588945] [TTM] Zone kernel: Available graphics memory: 379074 kiB
[ 3.595418] [TTM] Zone highmem: Available graphics memory: 1034434 kiB
[ 3.601949] [TTM] Initializing pool allocator
[ 3.606405] [drm] radeon: 1024M of VRAM memory ready
[ 3.611387] [drm] radeon: 2048M of GTT memory ready.
[ 3.616420] [drm] Loading verde Microcode
[ 3.620472] [drm] Internal thermal controller with fan control
[ 3.626542] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 3.680136] [drm] radeon: dpm initialized
[ 3.684367] radeon 0000:81:00.0: Direct firmware load for radeon/TAHITI_vce.bin failed with error -2
[ 3.693564] radeon 0000:81:00.0: radeon_vce: Can't load firmware "radeon/TAHITI_vce.bin"
[ 3.701712] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 3.718424] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 3.777173] [drm] PCIE GART of 2048M enabled (table at 0x0000000000277000).
[ 3.784463] radeon 0000:81:00.0: WB enabled
[ 3.788698] radeon 0000:81:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xedccec00
[ 3.798794] radeon 0000:81:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xedccec04
[ 3.808889] radeon 0000:81:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xedccec08
[ 3.818984] radeon 0000:81:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xedccec0c
[ 3.829080] radeon 0000:81:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xedccec10
[ 3.869588] radeon 0000:81:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xf5135a18
[ 3.879699] radeon 0000:81:00.0: VCE init error (-22).
[ 3.884852] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.891472] [drm] Driver supports precise vblank timestamp query.
[ 3.897576] radeon 0000:81:00.0: radeon: MSI limited to 32-bit
[ 3.903490] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 3.911753] radeon 0000:81:00.0: radeon: using MSI.
[ 3.916699] [drm] radeon: irq initialized.
[ 4.675950] [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[ 4.684763] radeon 0000:81:00.0: disabling GPU acceleration
[ 4.894037] [drm] Radeon Display Connectors
[ 4.898287] [drm] Connector 0:
[ 4.901358] [drm] HDMI-A-1
[ 4.904247] [drm] HPD4
[ 4.906794] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 4.914196] [drm] Encoders:
[ 4.917174] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.921453] [drm] Connector 1:
[ 4.924516] [drm] DVI-I-1
[ 4.927319] [drm] HPD2
[ 4.929859] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 4.937259] [drm] Encoders:
[ 4.940237] [drm] DFP2: INTERNAL_UNIPHY
[ 4.944430] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.061510] [drm] fb mappable at 0x80678000
[ 5.065706] [drm] vram apper at 0x80000000
[ 5.069812] [drm] size 8294400
[ 5.072876] [drm] fb depth is 24
[ 5.076114] [drm] pitch is 7680
[ 5.370437] Console: switching to colour frame buffer device 240x67
[ 5.448312] radeon 0000:81:00.0: fb0: radeondrmfb frame buffer device
[ 5.457660] [drm] Initialized radeon 2.43.0 20080528 for 0000:81:00.0 on minor 0
[ 5.474428] brd: module loaded
[ 5.482038] loop: module loaded
[ 5.485427] sata_sil 0001:00:04.0: version 2.4
[ 5.489994] sata_sil 0001:00:04.0: Applying R_ERR on DMA activate FIS errata fix
[ 5.498038] scsi host0: sata_sil
[ 5.501572] scsi host1: sata_sil
[ 5.504964] ata1: SATA max UDMA/100 mmio m512@0xd84280000 tf 0xd84280080 irq 21
[ 5.512291] ata2: SATA max UDMA/100 mmio m512@0xd84280000 tf 0xd842800c0 irq 21
[ 5.520223] PPC 4xx OCP EMAC driver, version 3.54
[ 5.525496] MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
[ 5.531376] ZMII /plb/opb/emac-zmii@ef600d00 initialized
[ 5.536804] RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
[ 5.543961] TAH /plb/opb/emac-tah@ef601350 initialized
[ 5.549159] TAH /plb/opb/emac-tah@ef601450 initialized
[ 5.554573] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
[ 5.561717] eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:50:c2:80:d5:c5
[ 5.568618] eth0: found Generic MII PHY (0x00)
[ 5.573244] /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode
[ 5.580330] eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:00:00:00:00:00
[ 5.587232] eth1: found Generic MII PHY (0x01)
[ 5.591727] PPP generic driver version 2.4.2
[ 5.596173] PPP BSD Compression module registered
[ 5.600903] PPP Deflate Compression module registered
[ 5.605964] NET: Registered protocol family 24
[ 5.610616] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.617302] ppc-of-ehci 4bffd0400.ehci: OF EHCI
[ 5.622015] ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1
[ 5.630449] ppc-of-ehci 4bffd0400.ehci: irq 31, io mem 0x4bffd0400
[ 5.642612] ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00
[ 5.649001] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.655807] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.663036] usb usb1: Product: OF EHCI
[ 5.666794] usb usb1: Manufacturer: Linux 4.4.0-rc5-Sam460ex ehci_hcd
[ 5.673243] usb usb1: SerialNumber: PPC-OF USB
[ 5.678096] hub 1-0:1.0: USB hub found
[ 5.681946] hub 1-0:1.0: 1 port detected
[ 5.686182] ehci-pci: EHCI PCI platform driver
[ 5.690739] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.697059] ppc-of-ohci 4bffd0000.usb: OF OHCI
[ 5.701687] ppc-of-ohci 4bffd0000.usb: new USB bus registered, assigned bus number 2
[ 5.709483] ppc-of-ohci 4bffd0000.usb: irq 32, io mem 0x4bffd0000
[ 5.833620] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 5.873150] ata1.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 5.885659] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 5.904873] ata1.00: configured for UDMA/100
[ 5.927866] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1D05 PQ: 0 ANSI: 5
[ 5.941267] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.949714] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.960834] sd 0:0:0:0: [sda] Write Protect is off
[ 5.970600] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.980675] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.989752] usb 1-1: new high-speed USB device number 2 using ppc-of-ehci
[ 6.013544] sda: RDSK (512) sda1 (DOS^G)(res 2 spb 1) sda2 (SFS^@)(res 2 spb 1) sda3 (SFS^@)(res 2 spb 1) sda4 (SFS^@)(res 2 spb 1) sda5 (SFS^@)(res 2 spb 1) sda6 (SFS^@)(res 2 spb 1) sda7 (NTFS)(res 2 spb 2) sda8 (EXT^C)(res 2 spb 1)
[ 6.055924] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.116047] usb 1-1: New USB device found, idVendor=0424, idProduct=2517
[ 6.128599] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.144697] hub 1-1:1.0: USB hub found
[ 6.151782] hub 1-1:1.0: 7 ports detected
[ 6.268624] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6.297734] ata2.00: ATAPI: ASUS DRW-24B3ST i, 1.00, max UDMA/100
[ 6.314712] ata2.00: configured for UDMA/100
[ 6.330526] scsi 1:0:0:0: CD-ROM ASUS DRW-24B3ST i 1.00 PQ: 0 ANSI: 5
[ 6.373847] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.388598] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.400199] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.410668] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.435611] usb 1-1.1: new high-speed USB device number 3 using ppc-of-ehci
[ 6.444718] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.451581] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.458896] usb usb2: Product: OF OHCI
[ 6.462707] usb usb2: Manufacturer: Linux 4.4.0-rc5-Sam460ex ohci_hcd
[ 6.469188] usb usb2: SerialNumber: PPC-OF USB
[ 6.474158] hub 2-0:1.0: USB hub found
[ 6.477979] hub 2-0:1.0: 1 port detected
[ 6.482241] ohci-pci: OHCI PCI platform driver
[ 6.486969] usbcore: registered new interface driver usblp
[ 6.492720] usbcore: registered new interface driver usb-storage
[ 6.498856] usbcore: registered new interface driver usbserial
[ 6.504745] usbcore: registered new interface driver usbserial_generic
[ 6.511325] usbserial: USB Serial support registered for generic
[ 6.517646] mousedev: PS/2 mouse device common for all mice
[ 6.523317] i2c /dev entries driver
[ 6.529204] rtc-m41t80 8-0068: rtc core: registered m41t80 as rtc0
[ 6.536365] ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
[ 6.542649] ibm-iic 4ef600800.i2c: using standard (100 kHz) mode
[ 6.548793] md: linear personality registered for level -1
[ 6.554364] md: raid0 personality registered for level 0
[ 6.559718] md: raid1 personality registered for level 1
[ 6.565082] md: raid10 personality registered for level 10
[ 6.570764] md: raid6 personality registered for level 6
[ 6.576162] md: raid5 personality registered for level 5
[ 6.581568] md: raid4 personality registered for level 4
[ 6.587277] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
[ 6.594412] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 6.602904] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.610274] EDAC PPC4xx MC: v1.0.0
[ 6.613721] usb 1-1.1: Product: USB 2.0 Hub
[ 6.617923] EDAC PPC4xx MC: Reporting type: interrupt
[ 6.623513] hub 1-1.1:1.0: USB hub found
[ 6.627615] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.633401] hub 1-1.1:1.0: 4 ports detected
[ 6.637840] usbcore: registered new interface driver usbhid
[ 6.643500] usbhid: USB HID core driver
[ 6.647974] usbcore: registered new interface driver snd-usb-audio
[ 6.654327] usbcore: registered new interface driver snd-ua101
[ 6.660313] usbcore: registered new interface driver snd-usb-usx2y
[ 6.667029] ipip: IPv4 over IPv4 tunneling driver
[ 6.672359] Initializing XFRM netlink socket
[ 6.677391] NET: Registered protocol family 10
[ 6.682995] sit: IPv6 over IPv4 tunneling driver
[ 6.688173] NET: Registered protocol family 17
[ 6.692666] NET: Registered protocol family 15
[ 6.697425] Running MSI bitmap self-tests ...
[ 6.703510] Key type encrypted registered
[ 6.709071] rtc-m41t80 8-0068: setting system clock to 2015-12-20 13:30:54 UTC (1450618254)
[ 6.717703] ALSA device list:
[ 6.720705] No soundcards found.
[ 6.724660] md: Waiting for all devices to be available before autodetect
[ 6.731494] md: If you don't use raid, use raid=noautodetect
[ 6.737827] md: Autodetecting RAID arrays.
[ 6.741965] md: Scanned 0 and added 0 devices.
[ 6.746419] md: autorun ...
[ 6.749223] md: ... autorun DONE.
[ 6.752620] usb 1-1.2: new low-speed USB device number 4 using ppc-of-ehci
[ 6.784922] EXT4-fs (sda8): mounting ext3 file system using the ext4 subsystem
[ 6.802166] EXT4-fs (sda8): INFO: recovery required on readonly filesystem
[ 6.809087] EXT4-fs (sda8): write access will be enabled during recovery
[ 6.854016] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 6.860945] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.868299] usb 1-1.2: Product: USB Keyboard
[ 6.872612] usb 1-1.2: Manufacturer: CHICONY
[ 6.883809] input: CHICONY USB Keyboard as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F2:0116.0001/input/input0
[ 6.946881] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-PPC-OF USB-1.2/input0
[ 6.959153] usb 1-1.1.1: new full-speed USB device number 5 using ppc-of-ehci
[ 6.967922] EXT4-fs (sda8): recovery complete
[ 6.985001] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 6.992783] VFS: Mounted root (ext3 filesystem) readonly on device 8:8.
[ 7.026165] devtmpfs: mounted
[ 7.029821] Freeing unused kernel memory: 236K (c09be000 - c09f9000)
[ 7.063753] usb 1-1.1.1: New USB device found, idVendor=0d8c, idProduct=000c
[ 7.071353] usb 1-1.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 7.079059] usb 1-1.1.1: Product: C-Media USB Audio Device
[ 7.108040] input: C-Media USB Audio Device as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.3/0003:0D8C:000C.0002/input/input1
[ 7.136617] usb 1-1.6: new full-speed USB device number 6 using ppc-of-ehci
[ 7.172909] hid-generic 0003:0D8C:000C.0002: input,hidraw1: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-PPC-OF USB-1.1.1/input3
[ 7.232505] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c52b
[ 7.239698] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.247549] usb 1-1.6: Product: USB Receiver
[ 7.251879] usb 1-1.6: Manufacturer: Logitech
[ 7.260371] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C52B.0003/input/input2
[ 7.323893] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input0
[ 7.342219] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C52B.0004/input/input3
[ 7.405987] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input1
[ 7.422968] random: nonblocking pool is initialized
[ 7.429055] hid-generic 0003:046D:C52B.0005: hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input2
[ 7.513622] usb 1-1.7: new high-speed USB device number 7 using ppc-of-ehci
[ 7.613243] usb 1-1.7: New USB device found, idVendor=0424, idProduct=2240
[ 7.620175] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.628106] usb 1-1.7: Product: Ultra Fast Media
[ 7.633009] usb 1-1.7: Manufacturer: Generic
[ 7.637650] usb 1-1.7: SerialNumber: 000000225001
[ 7.643284] usb-storage 1-1.7:1.0: USB Mass Storage device detected
[ 7.649880] scsi host2: usb-storage 1-1.7:1.0
[ 8.198414] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 8.300902] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 8.319381] systemd[1]: Detected architecture ppc.
Welcome to Ubuntu 16.04!
[ 8.365718] systemd[1]: Set hostname to <Sam460ex>.
[ 8.655519] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ: 0 ANSI: 0
[ 8.664717] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 8.672113] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 8.677837] systemd-fstab-generator[116]: Mount point is not a valid path, ignoring.
[ 8.725159] systemd[110]: /lib/systemd/system-generators/systemd-fstab-generator terminated by signal ABRT.
[ 9.616540] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 9.629970] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 9.642000] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 9.653032] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 9.664869] systemd[1]: Reached target User and Group Name Lookups.
[ OK ] Reached target User and Group Name Lookups.
[ 9.679657] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
[ 9.699056] systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
[ 9.709835] systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
[ 9.720099] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
[ 9.746959] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 9.764360] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 9.781244] systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
[ 9.796964] systemd[1]: Started Read required files in advance.
[ OK ] Started Read required files in advance.
[ 9.866708] systemd[1]: Mounting Debug File System...
Mounting Debug File System...
[ 9.891868] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ 9.909046] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 9.923848] systemd[1]: Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems (Pre).
[ 9.937836] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 9.955010] systemd[1]: Starting Uncomplicated firewall...
Starting Uncomplicated firewall...
[ 9.970067] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 9.986916] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 9.998407] systemd[1]: Reached target Encrypted Volumes.
[ OK ] Reached target Encrypted Volumes.
[ 10.014911] systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st... nodes for the current kernel...
[ 10.039084] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 10.062414] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 10.076045] systemd[1]: Listening on fsck to fsckd communication Socket.
[ OK ] Listening on fsck to fsckd communication Socket.
[ 10.096121] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 10.106983] systemd[1]: Failed to start Load Kernel Modules.
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[ 10.127780] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 10.136459] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 10.147588] systemd[1]: Mounting Configuration File System...
Mounting Configuration File System...
[ 10.171770] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 10.190188] systemd[1]: Mounting FUSE Control File System...
Mounting FUSE Control File System...
[ 10.244402] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
[ 10.270311] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 10.289802] systemd[1]: Started Uncomplicated firewall.
[ OK ] Started Uncomplicated firewall.
[ 10.533584] systemd[1]: Mounted FUSE Control File System.
[ OK ] Mounted FUSE Control File System.
[ 10.557074] systemd[1]: Mounted Configuration File System.
[ OK ] Mounted Configuration File System.
[ 10.571007] systemd[1]: Mounted Debug File System.
[ OK ] Mounted Debug File System.
[ 10.582979] systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
[ 10.613271] systemd[1]: Started Apply Kernel Variables.
[ OK ] Started Apply Kernel Variables.
[ 10.773178] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
[ 10.794464] systemd[1]: ureadahead.service: Unit entered failed state.
[ 10.801304] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
[ 11.031758] systemd[1]: Started Create Static Device Nodes in /dev.
[ OK ] Started Create Static Device Nodes in /dev.
[ 11.053753] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
Starting udev Kernel Device Manager...
[ OK ] Started udev Kernel Device Manager.
Starting File System Check on Root Device...
[ OK ] Started File System Check Daemon to report status.
[ OK ] Started File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
[ 12.784900] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 12.795053] systemd-remount[154]: unhandled signal 11 at 0000000c nip 203a39a4 lr 203a371c code 30001
[FAILED] Failed to start Remount Root and Kernel File Systems.
See 'systemctl status systemd-remount-fs.service' for details.
[ OK ] Reached target Local File Systems (Pre).
Starting Load/Save Random Seed...
Starting Flush Journal to Persistent Storage...
Starting udev Coldplug all Devices...
[ OK ] Started Load/Save Random Seed.
[ 13.055008] systemd-journald[133]: Received request to flush runtime journal from PID 1
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started udev Coldplug all Devices.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ 14.368384] sata-dwc 4bffd1000.sata: ioremap done for SATA register address
[ OK ] Found device /dev/ttyS0.
[ 14.439908] sata-dwc 4bffd1000.sata: id 0, controller version 1.82
[ 14.512672] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 14.627745] sata-dwc 4bffd1000.sata: DW_PARAMS: 0x10800804
[ 14.670723] sata-dwc 4bffd1000.sata: DWC_PARAMS[0]: 0x49230b1b
[ 14.725763] sata-dwc 4bffd1000.sata: DesignWare DMA Controller, 1 channels
[ 14.762694] sata-dwc 4bffd1000.sata: sata_dwc_port_start: port_no=0
[ 14.809548] dma dma0chan0: dwc_alloc_chan_resources
[ 14.841745] dma dma0chan0: moving desc ffa0c000 to freelist
[ 14.876445] dma dma0chan0: moving desc ffa0c060 to freelist
[ 14.921276] dma dma0chan0: moving desc ffa0c0c0 to freelist
[ 14.964470] dma dma0chan0: moving desc ffa0c120 to freelist
[ 15.079296] dma dma0chan0: moving desc ffa0c180 to freelist
[ 15.114112] dma dma0chan0: moving desc ffa0c1e0 to freelist
[ 15.137708] dma dma0chan0: moving desc ffa0c240 to freelist
[ 15.163666] dma dma0chan0: moving desc ffa0c2a0 to freelist
[ 15.182164] dma dma0chan0: moving desc ffa0c300 to freelist
[ 15.201724] dma dma0chan0: moving desc ffa0c360 to freelist
[ 15.219671] dma dma0chan0: moving desc ffa0c3c0 to freelist
[ 15.240108] dma dma0chan0: moving desc ffa0c420 to freelist
[ 15.258221] dma dma0chan0: moving desc ffa0c480 to freelist
[ OK ] [ 15.281646] dma dma0chan0: moving desc ffa0c4e0 to freelist
Reached target Sound Card.
[ 15.303698] dma dma0chan0: moving desc ffa0c540 to freelist
[ 15.324628] dma dma0chan0: moving desc ffa0c5a0 to freelist
[ 15.337637] dma dma0chan0: moving desc ffa0c600 to freelist
[ 15.351633] dma dma0chan0: moving desc ffa0c660 to freelist
[ 15.368971] dma dma0chan0: moving desc ffa0c6c0 to freelist
[ OK ] Created slice syste[ 15.381513] dma dma0chan0: moving desc ffa0c720 to freelist
m-ifup.slice.
[ 15.416682] dma dma0chan0: moving desc ffa0c780 to freelist
[ OK ] Found device /sys/subsystem/net/devices/eth0.
[ 15.459033] dma dma0chan0: moving desc ffa0c7e0 to freelist
[ 15.501662] dma dma0chan0: moving desc ffa0c840 to freelist
[ 15.532653] dma dma0chan0: moving desc ffa0c8a0 to freelist
[ 15.582851] dma dma0chan0: moving desc ffa0c900 to freelist
[ 15.632695] dma dma0chan0: moving desc ffa0c960 to freelist
[ 15.673581] dma dma0chan0: moving desc ffa0c9c0 to freelist
[ 15.721666] dma dma0chan0: moving desc ffa0ca20 to freelist
[ 15.751309] dma dma0chan0: moving desc ffa0ca80 to freelist
[ 15.781667] dma dma0chan0: moving desc ffa0cae0 to freelist
[ 15.815651] dma dma0chan0: moving desc ffa0cb40 to freelist
[ 15.851693] dma dma0chan0: moving desc ffa0cba0 to freelist
[ 15.896656] dma dma0chan0: moving desc ffa0cc00 to freelist
[ 15.942782] dma dma0chan0: moving desc ffa0cc60 to freelist
[ 16.007672] dma dma0chan0: moving desc ffa0ccc0 to freelist
[ OK ] Found device WDC_WD5000AAKS-00V1A0 NTFS.
[ 16.090507] dma dma0chan0: moving desc ffa0cd20 to freelist
[ 16.159658] dma dma0chan0: moving desc ffa0cd80 to freelist
Mounting /media/NTFS...
[ 16.240647] dma dma0chan0: moving desc ffa0cde0 to freelist
[ 16.314691] dma dma0chan0: moving desc ffa0ce40 to freelist
[ 16.372678] dma dma0chan0: moving desc ffa0cea0 to freelist
[ 16.437024] dma dma0chan0: moving desc ffa0cf00 to freelist
[ 16.467026] dma dma0chan0: moving desc ffa0cf60 to freelist
[ 16.526705] dma dma0chan0: moving desc ffa0d000 to freelist
[ 16.581372] dma dma0chan0: moving desc ffa0d060 to freelist
[ 16.623690] dma dma0chan0: moving desc ffa0d0c0 to freelist
[ 16.666401] dma dma0chan0: moving desc ffa0d120 to freelist
[ 16.699750] dma dma0chan0: moving desc ffa0d180 to freelist
[ 16.738776] dma dma0chan0: moving desc ffa0d1e0 to freelist
[ 16.781696] dma dma0chan0: moving desc ffa0d240 to freelist
[ 16.822544] dma dma0chan0: moving desc ffa0d2a0 to freelist
[ 16.872354] dma dma0chan0: moving desc ffa0d300 to freelist
[ 16.912212] dma dma0chan0: moving desc ffa0d360 to freelist
[ 16.953597] dma dma0chan0: moving desc ffa0d3c0 to freelist
[ 16.991684] dma dma0chan0: moving desc ffa0d420 to freelist
[ 17.032723] dma dma0chan0: moving desc ffa0d480 to freelist
[ 17.083692] dma dma0chan0: moving desc ffa0d4e0 to freelist
[ OK ] Mounted /media/NTFS.
[ 17.163810] dma dma0chan0: moving desc ffa0d540 to freelist
32m OK ] Reached target Local File Systems.
Starting LSB: AppArmor initialization...
Starting Clean up any mess left by 0dns-up...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Wait for all "auto" /etc/n... up for network-online.target...
Starting Create Volatile Files and Directories...
[ 17.334683] dma dma0chan0: moving desc ffa0d5a0 to freelist
[ 17.403183] dma dma0chan0: moving desc ffa0d600 to freelist
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shut[ 17.497944] dma dma0chan0: moving desc ffa0d660 to freelist
down...
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
[ 17.629289] dma dma0chan0: moving desc ffa0d6c0 to freelist
[ 17.691590] dma dma0chan0: moving desc ffa0d720 to freelist
[ 17.746676] dma dma0chan0: moving desc ffa0d780 to freelist
[ 17.797816] dma dma0chan0: moving desc ffa0d7e0 to freelist
[ 17.835660] dma dma0chan0: dwc_alloc_chan_resources: allocated 64 descriptors
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ 17.912649] dmaengine: __dma_request_channel: success (dma0chan0)
[ 17.951854] sata-dwc 4bffd1000.sata: sata_dwc_port_start: clearing TXCHEN, RXCHEN in DMAC
[ OK ] Started Clean up any mess left by 0dns-up.
Starting Nameserver information manager...
[ 18.070651] sata-dwc 4bffd1000.sata: sata_dwc_port_start: setting burst size in DBTSR
[ 18.196668] sata-dwc 4bffd1000.sata: sata_dwc_port_start: done
[ 18.209685] scsi host3: sata-dwc
[ 18.209901] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000000
[ 18.209908] ata3: SATA max UDMA/133 irq 36
[ 18.209984] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000000
[ 18.209992] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000000
[ 18.210000] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000301
[ 18.210007] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
[ 18.211671] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
[ 18.211680] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000300
[ 18.412685] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 18.412694] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.418735] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.424689] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.430671] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.436679] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.448729] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.454699] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.460693] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.466677] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.472686] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.478679] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.484682] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.490686] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.504345] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.509673] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515688] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515697] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 18.515705] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 18.515712] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515728] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 18.515735] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515743] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515750] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515769] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 18.515775] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 18.515782] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515789] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 18.515795] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515802] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.515812] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 18.515837] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 18.515844] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 18.515852] dma dma0chan0: dwc_prep_slave_sg
[ 18.515859] dma dma0chan0: scanned 1 descriptors on freelist
[ 18.515868] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c88, count: 1 addr: 0xfffffffff6a18400
[ 18.518791] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 18.518801] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 18.518808] dma dma0chan0: dwc_prep_slave_sg
[ 18.518814] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 18.527820] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 18.527830] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 18.527836] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 18.527843] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 18.527891] ata3.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133
[ 18.527898] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 1/32)
[ 18.527939] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 18.527947] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 18.527954] dma dma0chan0: dwc_prep_slave_sg
[ 18.527960] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 18.530728] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 18.530738] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 18.530745] dma dma0chan0: dwc_prep_slave_sg
[ 18.530753] dma dma0chan0: scanned 1 descriptors on freelist
[ 18.530762] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 18.533800] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 18.533809] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 18.533816] dma dma0chan0: dwc_prep_slave_sg
[ 18.533822] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 18.534763] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 18.534772] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 18.534779] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 18.534786] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 18.534844] ata3.00: configured for UDMA/133
[ 18.538182] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
[ 18.539025] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 18.539236] sd 3:0:0:0: [sdc] Write Protect is off
[ 18.539245] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 18.539338] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.540049] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 18.540362] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 18.540370] dma dma0chan0: dwc_prep_slave_sg
[ 18.540378] dma dma0chan0: scanned 1 descriptors on freelist
[ 18.540387] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed37f200, count: 1 addr: 0xfffffffff6a18400
[ 18.540395] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue: tag=0 ap->link.sactive = 0x00000001 sactive=0x00000001
[ 18.540426] sata-dwc 4bffd1000.sata: sata_dwc_exec_command_by_tag cmd(0x60): READ FPDMA QUEUED tag=0
[ 18.556592] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x00000082 active_tag=-84148995
[ 18.556599] sata-dwc 4bffd1000.sata: sata_dwc_isr: NEWFP tag=0
[ 18.556609] sata-dwc 4bffd1000.sata: sata_dwc_bmdma_start_by_tag qc=ed2180b8 tag: 0 cmd: 0x60 dma_dir: from device start_dma? 1
[ 18.556616] sata-dwc 4bffd1000.sata: taskfile cmd: 0x60 protocol: ATA NCQ flags: 0x17 device: 40
[ 18.556623] sata-dwc 4bffd1000.sata: feature: 0x08 nsect: 0x0 lbal: 0x0 lbam: 0x0 lbah: 0x0
[ 18.556631] sata-dwc 4bffd1000.sata: hob_feature: 0x00 hob_nsect: 0x0 hob_lbal: 0x0 hob_lbam: 0x0 hob_lbah: 0x0
[ 18.556639] dma dma0chan0: dwc_tx_submit: queued 2
[ 18.556646] dma dma0chan0: dwc_dostart_first_queued: started 2
[ OK ] Started Nameserver information manager.
[ OK ] Started LSB: AppArmor initialization.
[ OK ] Started ifup for eth0.
Starting LSB: Raise network interfaces....
[ 21.434701] eth0: link is up, 1000 FDX, pause enabled
Starting LSB: start Samba SMB/CIFS daemon (smbd)...
[ OK ] Started LSB: start Samba SMB/CIFS daemon (smbd).
[ OK ] Started Wait for all "auto" /etc/ne...be up for network-online.target.
\r\r[** ] A start job is running for LSB: Rai...ork interfaces. (32s / no limit)\r[* ] A start job is running for LSB: Rai...ork interfaces. (33s / no limit)\r[** ] A start job is running for LSB: Rai...ork interfaces. (33s / no limit)\r[*** ] A start job is running for LSB: Rai...ork interfaces. (34s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (34s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (35s / no limit)\r[ ***] A start job is running for LSB: Rai...ork interfaces. (35s / no limit)\r[ **] A start job is running for LSB: Rai...ork interfaces. (36s / no limit)\r[ *] A start job is running for LSB: Rai...ork interfaces. (36s / no limit)\r[ **] A start job is running for LSB: Rai...ork interfaces. (37s / no limit)\r[ ***] A start job is running for LSB: Rai...ork interfaces. (37s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (38s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (38s / no limit)[ 48.748634] ata3: lost interrupt (Status 0x40)
[ 48.753465] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 48.761369] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 48.769671] ata3.00: failed command: READ FPDMA QUEUED
\r[ 48.775573] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 48.775573] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
;31[ 48.790815] ata3.00: status: { DRDY }
m*[ 48.790838] ata3: hard resetting link
48.790852] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
0;[ 48.790860] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
1;[ 48.790886] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000301
31[ 48.790892] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
m*[ 48.794722] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
48.794729] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000300
0m* ] A start job is running for LSB: Rai...ork interfaces. (39s / no limit)[ 48.995623] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 49.003501] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.018630] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.031627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.044684] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.057631] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.070627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.083627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.096627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.109627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.117516] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 49.127031] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 49.135034] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.144511] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 49.154001] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.163472] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.171394] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.180909] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 49.188822] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 49.198390] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.206314] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 49.215822] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.223737] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 49.231040] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.238957] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.248440] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.262617] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 49.271495] dma dma0chan0: dwc_prep_slave_sg
[ 49.275775] dma dma0chan0: scanned 1 descriptors on freelist
[ 49.281445] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
\r[**[ 49.295512] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.311143] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 49.319412] dma dma0chan0: dwc_prep_slave_sg
[ 49.323691] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 49.332355] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 49.339821] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 49.348439] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 49.355150] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
] A start job is running for LSB: Rai...ork interfaces. (39s / no limit)[ 49.373094] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.387366] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 49.395635] dma dma0chan0: dwc_prep_slave_sg
[ 49.399906] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 49.411833] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.426012] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 49.434888] dma dma0chan0: dwc_prep_slave_sg
[ 49.439160] dma dma0chan0: scanned 1 descriptors on freelist
[ 49.444830] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 49.458577] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.474154] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 49.482424] dma dma0chan0: dwc_prep_slave_sg
[ 49.486702] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 49.495358] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 49.502763] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 49.511382] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 49.518092] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 49.526146] ata3.00: configured for UDMA/133
[ 49.530497] ata3.00: device reported invalid CHS sector 0
[ 49.535990] ata3: EH complete
[ 49.539247] ------------[ cut here ]------------
[ 49.543870] WARNING: at drivers/ata/libata-core.c:5051
[ 49.549007] Modules linked in: input_leds led_class sata_dwc_460ex
[ 49.555264] CPU: 0 PID: 293 Comm: scsi_eh_3 Not tainted 4.4.0-rc5-Sam460ex #3
[ 49.562405] task: ed271140 ti: ed2e0000 task.ti: ed2e0000
[ 49.567802] NIP: c043bbe0 LR: c0440d58 CTR: c0442bd4
[ 49.572767] REGS: ed2e1c70 TRAP: 0700 Not tainted (4.4.0-rc5-Sam460ex)
[ 49.579554] MSR: 00021000 <CE,ME> CR: 22000048 XER: 00000000
[ 49.585474]
GPR00: c0440d58 ed2e1d20 ed271140 ed2180b8 ed219a48 00000000 00000000 00000000
GPR08: 00000006 00000004 00000001 ed2e1d50 28000022 00000000 00000005 00002710
GPR16: c04264b4 c0944a03 c08fb4b8 c094492f c09020db ed145c1c 0000001e 00000000
GPR24: ed1450e0 ed1fa9a0 edc485b0 c0442bd4 ed218000 ed2197c8 ed218000 ed2180b8
[ 49.615694] NIP [c043bbe0] ata_qc_issue+0x4c/0x3a0
[ 49.620487] LR [c0440d58] ata_scsi_translate+0xf4/0x150
[ 49.625709] Call Trace:
[ 49.628162] [ed2e1d20] [c0442d6c] ata_scsi_rw_xlat+0x198/0x1e4 (unreliable)
[ 49.635148] [ed2e1d50] [c0440d58] ata_scsi_translate+0xf4/0x150
[ 49.641086] [ed2e1d70] [c0444154] ata_scsi_queuecmd+0x1e8/0x238
[ 49.647024] [ed2e1d90] [c04251f0] scsi_dispatch_cmd+0xd4/0x110
[ 49.652875] [ed2e1da0] [c0427b70] scsi_request_fn+0x52c/0x55c
[ 49.658641] [ed2e1df0] [c024cd34] __blk_run_queue+0x44/0x58
[ 49.664236] [ed2e1e00] [c024cf30] blk_run_queue+0x28/0x44
[ 49.669653] [ed2e1e10] [c0425d4c] scsi_run_queue+0x240/0x268
[ 49.675331] [ed2e1e50] [c0427bd8] scsi_run_host_queues+0x30/0x44
[ 49.681346] [ed2e1e60] [c0424e18] scsi_error_handler+0x3e0/0x44c
[ 49.687369] [ed2e1ed0] [c0039798] kthread+0xc8/0xcc
[ 49.692269] [ed2e1f40] [c000b0d0] ret_from_kernel_thread+0x5c/0x64
[ 49.698460] Instruction dump:
[ 49.701447] 815e0004 83a90000 89230014 814a0058 2f8a0000 419e0038 815d0120 2b8a001f
[ 49.709328] 419d002c 3d40c0a3 894a575b 694a0001 <0f0a0000> 2f8a0000 41be0014 3d40c0a3
[ 49.717386] ---[ end trace 0b0316debe3b1cf8 ]---
[ 49.722024] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 49.730904] dma dma0chan0: dwc_prep_slave_sg
[ 49.735176] dma dma0chan0: scanned 1 descriptors on freelist
[ 49.740846] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed37f200, count: 1 addr: 0xfffffffff6a18400
[ 49.750419] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue: tag=0 ap->link.sactive = 0x00000001 sactive=0x00000001
[ 49.760450] sata-dwc 4bffd1000.sata: sata_dwc_exec_command_by_tag cmd(0x60): READ FPDMA QUEUED tag=0
[ 49.774412] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x00000082 active_tag=0
[ 49.781740] sata-dwc 4bffd1000.sata: sata_dwc_isr: NEWFP tag=0
[ 49.787583] sata-dwc 4bffd1000.sata: sata_dwc_bmdma_start_by_tag qc=ed2180b8 tag: 0 cmd: 0x60 dma_dir: from device start_dma? 1
[ 49.799064] sata-dwc 4bffd1000.sata: taskfile cmd: 0x60 protocol: ATA NCQ flags: 0x17 device: 40
[ 49.807849] sata-dwc 4bffd1000.sata: feature: 0x08 nsect: 0x0 lbal: 0x0 lbam: 0x0 lbah: 0x0
[ 49.816200] sata-dwc 4bffd1000.sata: hob_feature: 0x00 hob_nsect: 0x0 hob_lbal: 0x0 hob_lbam: 0x0 hob_lbah: 0x0
[ 49.826296] dma dma0chan0: dwc_tx_submit: queued 3
\r[* ] A start job is running for LSB: Rai...ork interfaces. (40s / no limit)\r[** ] A start job is running for LSB: Rai...ork interfaces. (40s / no limit)\r[*** ] A start job is running for LSB: Rai...ork interfaces. (41s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (41s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (42s / no limit)\r[ ***] A start job is running for LSB: Rai...ork interfaces. (42s / no limit)\r[ **] A start job is running for LSB: Rai...ork interfaces. (43s / no limit)\r[ *] A start job is running for LSB: Rai...ork interfaces. (43s / no limit)\r[ **] A start job is running for LSB: Rai...ork interfaces. (44s / no limit)\r[ ***] A start job is running for LSB: Rai...ork interfaces. (44s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (45s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (45s / no limit)\r[*** ] A start job is running for LSB: Rai...ork interfaces. (46s / no limit)\r[** ] A start job is running for LSB: Rai...ork interfaces. (46s / no limit)\r[* ] A start job is running for LSB: Rai...ork interfaces. (47s / no limit)\r[** ] A start job is running for LSB: Rai...ork interfaces. (47s / no limit)\r[*** ] A start job is running for LSB: Rai...ork interfaces. (48s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (48s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (49s / no limit)\r[ ***] A start job is running for LSB: Rai...ork interfaces. (49s / no limit)\r[ **] A start job is running for LSB: Rai...ork interfaces. (50s / no limit)\r[ *] A start job is running for LSB: Rai...ork interfaces. (50s / no limit)\r[ **] A start job is running for LSB: Rai...ork interfaces. (51s / no limit)\r[ ***] A start job is running for LSB: Rai...ork interfaces. (51s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (52s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (52s / no limit)\r[*** ] A start job is running for LSB: Rai...ork interfaces. (53s / no limit)\r[** ] A start job is running for LSB: Rai...ork interfaces. (53s / no limit)\r[* ] A start job is running for LSB: Rai...ork interfaces. (54s / no limit)\r[** ] A start job is running for LSB: Rai...ork interfaces. (54s / no limit)\r[*** ] A start job is running for LSB: Rai...ork interfaces. (55s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (55s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (56s / no limit)\r[ ***] A start job is running for LSB: Rai...ork interfaces. (56s / no limit)\r[ **] A start job is running for LSB: Rai...ork interfaces. (57s / no limit)\r[ *] A start job is running for LSB: Rai...ork interfaces. (57s / no limit)\r[ **] A start job is running for LSB: Rai...ork interfaces. (58s / no limit)\r[ ***] A start job is running for LSB: Rai...ork interfaces. (58s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (59s / no limit)\r[ *** ] A start job is running for LSB: Rai...ork interfaces. (59s / no limit)\r[*** ] A start job is running for LSB: Rai...rk interfaces. (1min / no limit)\r[** ] A start job is running for LSB: Rai...rk interfaces. (1min / no limit)\r[* ] A start job is running for LSB: Rai...interfaces. (1min 1s / no limit)\r[** ] A start job is running for LSB: Rai...interfaces. (1min 1s / no limit)\r[*** ] A start job is running for LSB: Rai...interfaces. (1min 2s / no limit)\r[ *** ] A start job is running for LSB: Rai...interfaces. (1min 2s / no limit)\r[ *** ] A start job is running for LSB: Rai...interfaces. (1min 3s / no limit)\r[ ***] A start job is running for LSB: Rai...interfaces. (1min 3s / no limit)\r[ **] A start job is running for LSB: Rai...interfaces. (1min 4s / no limit)\r[ *] A start job is running for LSB: Rai...interfaces. (1min 4s / no limit)\r[ **] A start job is running for LSB: Rai...interfaces. (1min 5s / no limit)\r[ ***] A start job is running for LSB: Rai...interfaces. (1min 5s / no limit)\r[ *** ] A start job is running for LSB: Rai...interfaces. (1min 6s / no limit)\r[ *** ] A start job is running for LSB: Rai...interfaces. (1min 6s / no limit)\r[*** ] A start job is running for LSB: Rai...interfaces. (1min 7s / no limit)\r[** ] A start job is running for LSB: Rai...interfaces. (1min 7s / no limit)\r[* ] A start job is running for LSB: Rai...interfaces. (1min 8s / no limit)\r[** ] A start job is running for LSB: Rai...interfaces. (1min 8s / no limit)\r[*** ] A start job is running for LSB: Rai...interfaces. (1min 9s / no limit)\r[ *** ] A start job is running for LSB: Rai...interfaces. (1min 9s / no limit)[ 79.724633] ata3: lost interrupt (Status 0x40)
[ 79.729536] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 79.737456] ata3.00: NCQ disabled due to excessive errors
[ 79.744035] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 79.751166] ata3.00: failed command: READ FPDMA QUEUED
[ 79.756753] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 79.756753] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 79.771407] ata3.00: status: { DRDY }
\r 79.776177] ata3: hard resetting link
K[[ 79.780060] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
* 79.789323] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
1m*[ 79.797374] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000301
* ] A st[ 79.807363] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
art job is running[ 79.816704] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
f[ 79.824736] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000300
or LSB: Rai...nterfaces. (1min 10s / no limit)[ 80.035631] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 80.043514] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.058630] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.071628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.084630] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.097628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.110628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.123629] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.136628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.149628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.157505] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 80.166975] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 80.174978] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.184508] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 80.194002] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.203499] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.211422] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.220946] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 80.228862] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 80.238418] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 80.246343] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x000003\r[ *] A start job is running for LSB: Rai...nterfaces. (1min 11s / no limit)\r[ **] A start job is running for LSB: Rai...nterfaces. (1min 12s / no limit)\r[ ***] A start job is running for LSB: Rai...nterfaces. (1min 12s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 13s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 13s / no limit)\r[*** ] A start job is running for LSB: Rai...nterfaces. (1min 14s / no limit)\r[** ] A start job is running for LSB: Rai...nterfaces. (1min 14s / no limit)\r[* ] A start job is running for LSB: Rai...nterfaces. (1min 15s / no limit)\r[** ] A start job is running for LSB: Rai...nterfaces. (1min 15s / no limit)\r[*** ] A start job is running for LSB: Rai...nterfaces. (1min 16s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 16s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 17s / no limit)\r[ ***] A start job is running for LSB: Rai...nterfaces. (1min 17s / no limit)\r[ **] A start job is running for LSB: Rai...nterfaces. (1min 18s / no limit)\r[ *] A start job is running for LSB: Rai...nterfaces. (1min 18s / no limit)\r[ **] A start job is running for LSB: Rai...nterfaces. (1min 19s / no limit)\r[ ***] A start job is running for LSB: Rai...nterfaces. (1min 19s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 20s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 20s / no limit)\r[*** ] A start job is running for LSB: Rai...nterfaces. (1min 21s / no limit)\r[** ] A start job is running for LSB: Rai...nterfaces. (1min 21s / no limit)\r[* ] A start job is running for LSB: Rai...nterfaces. (1min 22s / no limit)\r[** ] A start job is running for LSB: Rai...nterfaces. (1min 22s / no limit)\r[*** ] A start job is running for LSB: Rai...nterfaces. (1min 23s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 23s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 24s / no limit)\r[ ***] A start job is running for LSB: Rai...nterfaces. (1min 24s / no limit)\r[ **] A start job is running for LSB: Rai...nterfaces. (1min 25s / no limit)\r[ *] A start job is running for LSB: Rai...nterfaces. (1min 25s / no limit)\r[ **] A start job is running for LSB: Rai...nterfaces. (1min 26s / no limit)\r[ ***] A start job is running for LSB: Rai...nterfaces. (1min 26s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 27s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 27s / no limit)\r[*** ] A start job is running for LSB: Rai...nterfaces. (1min 28s / no limit)\r[** ] A start job is running for LSB: Rai...nterfaces. (1min 28s / no limit)\r[* ] A start job is running for LSB: Rai...nterfaces. (1min 29s / no limit)\r[** ] A start job is running for LSB: Rai...nterfaces. (1min 29s / no limit)\r[*** ] A start job is running for LSB: Rai...nterfaces. (1min 30s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 30s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 31s / no limit)\r[ ***] A start job is running for LSB: Rai...nterfaces. (1min 31s / no limit)\r[ **] A start job is running for LSB: Rai...nterfaces. (1min 32s / no limit)\r[ *] A start job is running for LSB: Rai...nterfaces. (1min 32s / no limit)\r[ **] A start job is running for LSB: Rai...nterfaces. (1min 33s / no limit)\r[ ***] A start job is running for LSB: Rai...nterfaces. (1min 33s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 34s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 34s / no limit)\r[*** ] A start job is running for LSB: Rai...nterfaces. (1min 35s / no limit)\r[** ] A start job is running for LSB: Rai...nterfaces. (1min 35s / no limit)\r[* ] A start job is running for LSB: Rai...nterfaces. (1min 36s / no limit)\r[** ] A start job is running for LSB: Rai...nterfaces. (1min 36s / no limit)\r[*** ] A start job is running for LSB: Rai...nterfaces. (1min 37s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 37s / no limit)\r[ *** ] A start job is running for LSB: Rai...nterfaces. (1min 38s / no limit)\r[ ***] A start job is running for LSB: Rai...nterfaces. (1min 38s / no limit)\r[ **] A start job is running for LSB: Rai...nterfaces. (1min 39s / no limit)\r[ *] A start job is running for LSB: Rai...nterfaces. (1min 39s / no limit)\r[ **] A start job is running for LSB: Rai...nterfaces. (1min 40s / no limit)\r[ ***] A start job is running for LSB: Rai...nterfaces. (1min 40s / no limit)[ 110.764630] ata3: lost interrupt (Status 0x50)
\r[ 110.770729] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ [ 110.778767] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
** 110.788782] ata3: limiting SATA link speed to 1.5 Gbps
;3[ 110.794156] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
1m* [ 110.801914] ata3.00: failed command: READ DMA
] [ 110.806437] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 110.806437] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
A start [ 110.821727] ata3.00: status: { DRDY }
job is [ 110.825984] ata3: hard resetting link
runn[ 110.829905] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
ing for LSB: Rai.[ 110.839297] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
..n[ 110.847359] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000304
terfaces. (1min 41s / no[ 110.857372] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000304
li[ 110.865453] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000314
mit)[ 110.875490] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000314
[ 110.883443] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ [ 205.804214] ata3: lost interrupt (Status 0x50)
[ 205.812254] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 205.829280] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 205.847215] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 205.864228] ata3.00: failed command: READ DMA
[ 205.886299] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 205.886299] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 205.928198] ata3.00: status: { DRDY }
[ 205.936199] ata3: hard resetting link
[ 205.944209] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 205.961211] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 205.978234] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 205.996205] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 206.016218] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 206.031246] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 206.249218] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 206.265258] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.288222] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.309232] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.331206] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.353207] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.374234] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.390195] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 206.407209] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 206.425203] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.441609] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 206.462289] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.480232] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.497210] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.516214] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 206.532219] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 206.550186] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.567188] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 206.585204] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.602194] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 206.616233] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.629948] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 206.638108] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 206.652285] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 206.661166] dma dma0chan0: dwc_prep_slave_sg
[ 206.665446] dma dma0chan0: scanned 1 descriptors on freelist
[ 206.671116] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 206.690289] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 206.705867] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 206.714135] dma dma0chan0: dwc_prep_slave_sg
[ 206.718413] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 206.727070] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 206.734474] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 206.743092] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 206.749794] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 206.809267] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 206.823541] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 206.831809] dma dma0chan0: dwc_prep_slave_sg
[ 206.836087] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 206.850944] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 206.865129] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 206.874005] dma dma0chan0: dwc_prep_slave_sg
[ 206.878285] dma dma0chan0: scanned 1 descriptors on freelist
[ 206.883954] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 206.903285] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 206.918862] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 206.927129] dma dma0chan0: dwc_prep_slave_sg
[ 206.931408] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 206.940064] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 206.947469] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 206.956087] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 206.962789] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 207.020254] ata3.00: configured for UDMA/33
[ 207.031768] ata3.00: device reported invalid CHS sector 0
[ 207.043222] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 207.061244] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x5 [current] [descriptor]
[ 207.077229] sd 3:0:0:0: [sdc] tag#0 ASC=0x21 ASCQ=0x4
[ 207.089269] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[ 207.108222] blk_update_request: I/O error, dev sdc, sector 0
[ 207.122229] Buffer I/O error on dev sdc, logical block 0, async page read
[ 207.137508] ata3: EH complete
[ 207.145553] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 207.154443] dma dma0chan0: dwc_prep_slave_sg
[ 207.158719] dma dma0chan0: scanned 1 descriptors on freelist
[ 207.164388] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 237.803993] ata3: lost interrupt (Status 0x50)
[ 237.811990] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 237.831015] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 237.850803] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 237.866982] ata3.00: failed command: READ DMA
[ 237.878740] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 237.878740] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 237.926703] ata3.00: status: { DRDY }
[ 237.934826] ata3: hard resetting link
[ 237.944972] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 237.963503] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 237.984026] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 238.000998] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 238.024001] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 238.038977] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 238.261980] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 238.282997] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.306975] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.327949] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.348981] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.369987] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.390974] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.405964] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 238.423934] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 238.440995] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.457941] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 238.480031] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.499012] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.516000] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.536988] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 238.552997] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 238.568966] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.585990] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 238.603985] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.621983] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 238.634973] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.652001] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 238.669001] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 238.683194] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 238.692069] dma dma0chan0: dwc_prep_slave_sg
[ 238.696348] dma dma0chan0: scanned 1 descriptors on freelist
[ 238.702019] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 238.759979] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 238.775554] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 238.783823] dma dma0chan0: dwc_prep_slave_sg
[ 238.788101] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 238.796755] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 238.804161] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 238.812780] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 238.819491] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 238.874029] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 238.888306] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 238.896574] dma dma0chan0: dwc_prep_slave_sg
[ 238.900852] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 238.948972] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 238.963159] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 238.972035] dma dma0chan0: dwc_prep_slave_sg
[ 238.976314] dma dma0chan0: scanned 1 descriptors on freelist
[ 238.981984] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 239.047000] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 239.062578] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 239.070845] dma dma0chan0: dwc_prep_slave_sg
[ 239.075123] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 239.083792] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 239.091193] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 239.099811] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 239.106513] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 239.159993] ata3.00: configured for UDMA/33
[ 239.170009] ata3.00: device reported invalid CHS sector 0
[ 239.182000] ata3: EH complete
[ 239.188999] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 239.197887] dma dma0chan0: dwc_prep_slave_sg
[ 239.202164] dma dma0chan0: scanned 1 descriptors on freelist
[ 239.207834] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 269.806747] ata3: lost interrupt (Status 0x50)
[ 269.814786] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 269.828313] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 269.836215] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 269.846547] ata3.00: failed command: READ DMA
[ 269.851025] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 269.851025] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 269.868224] ata3.00: status: { DRDY }
[ 269.874166] ata3: hard resetting link
[ 269.880202] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 269.888210] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 269.898231] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 269.911767] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 269.930705] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 269.938565] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 270.149682] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 270.157543] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.173682] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.186670] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.199672] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.212672] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.225672] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.241679] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.254671] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.267671] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.277113] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 270.285113] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 270.295227] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.303153] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 270.314710] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.322600] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.332543] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.343601] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 270.353191] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 270.361174] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.371172] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 270.379265] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.389290] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 270.395560] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.404986] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 270.412895] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 270.427068] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 270.435948] dma dma0chan0: dwc_prep_slave_sg
[ 270.440229] dma dma0chan0: scanned 1 descriptors on freelist
[ 270.445899] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 270.459802] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 270.475380] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 270.483647] dma dma0chan0: dwc_prep_slave_sg
[ 270.487918] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 270.496568] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 270.503971] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 270.512588] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 270.519290] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 270.536410] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 270.550683] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 270.558952] dma dma0chan0: dwc_prep_slave_sg
[ 270.563231] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 270.577594] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 270.591787] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 270.600662] dma dma0chan0: dwc_prep_slave_sg
[ 270.604942] dma dma0chan0: scanned 1 descriptors on freelist
[ 270.610612] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 270.624793] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 270.640371] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 270.648639] dma dma0chan0: dwc_prep_slave_sg
[ 270.652917] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 270.661659] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 270.669066] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 270.677684] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 270.684387] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 270.750334] ata3.00: configured for UDMA/33
[ 270.754591] ata3.00: device reported invalid CHS sector 0
[ 270.761021] ata3: EH complete
[ 270.764650] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 270.773538] dma dma0chan0: dwc_prep_slave_sg
[ 270.777815] dma dma0chan0: scanned 1 descriptors on freelist
[ 270.783485] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 301.035525] ata3: lost interrupt (Status 0x50)
[ 301.045475] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 301.072471] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.095537] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 301.119475] ata3.00: failed command: READ DMA
[ 301.135460] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 301.135460] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 301.178470] ata3.00: status: { DRDY }
[ 301.191515] ata3: hard resetting link
[ 301.204516] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 301.229499] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 301.252489] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 301.281470] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 301.307465] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 301.330447] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 301.557484] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 301.579469] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.607462] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.634442] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.660437] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.688490] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.708499] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 301.732465] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 301.749469] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.767476] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 301.788471] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.806467] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.824466] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.842547] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 301.859628] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 301.878486] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.895501] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 301.913476] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.931476] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 301.944485] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.962514] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 301.980581] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 301.994772] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 302.003648] dma dma0chan0: dwc_prep_slave_sg
[ 302.007928] dma dma0chan0: scanned 1 descriptors on freelist
[ 302.013597] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 302.082479] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 302.098053] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 302.106322] dma dma0chan0: dwc_prep_slave_sg
[ 302.110600] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 302.119266] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 302.126669] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 302.135288] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 302.141998] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 302.210501] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 302.224773] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 302.233040] dma dma0chan0: dwc_prep_slave_sg
[ 302.237319] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 302.337140] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 302.351326] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 302.360203] dma dma0chan0: dwc_prep_slave_sg
[ 302.364482] dma dma0chan0: scanned 1 descriptors on freelist
[ 302.370151] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 302.482263] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 302.497845] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 302.506113] dma dma0chan0: dwc_prep_slave_sg
[ 302.510391] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 302.519048] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 302.526453] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 302.535071] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 302.541782] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 302.641338] ata3.00: configured for UDMA/33
[ 302.655066] ata3.00: device reported invalid CHS sector 0
[ 302.671340] ata3: EH complete
[ 302.682403] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 302.691299] dma dma0chan0: dwc_prep_slave_sg
[ 302.695575] dma dma0chan0: scanned 1 descriptors on freelist
[ 302.701245] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 304.475842] systemd-fstab-generator[1544]: Mount point is not a valid path, ignoring.
[ 333.035211] ata3: lost interrupt (Status 0x50)
[ 333.041036] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 333.058733] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.073826] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 333.080926] ata3.00: failed command: READ DMA
[ 333.086272] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 333.086272] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 333.100904] ata3.00: status: { DRDY }
[ 333.105483] ata3: hard resetting link
[ 333.109191] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 333.118620] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 333.126522] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 333.136662] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 333.146561] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 333.164401] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 333.380201] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 333.388069] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.405187] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.418179] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.431179] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.445179] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.464956] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.485201] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.498178] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.507654] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 333.515551] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 333.525693] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.533606] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 333.545235] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.553133] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.571868] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.586532] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 333.594403] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 333.604711] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.612889] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 333.623031] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.631034] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 333.638972] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.646881] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 333.656930] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 333.671115] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 333.679993] dma dma0chan0: dwc_prep_slave_sg
[ 333.684274] dma dma0chan0: scanned 1 descriptors on freelist
[ 333.689943] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 333.712304] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 333.727880] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 333.736147] dma dma0chan0: dwc_prep_slave_sg
[ 333.740426] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 333.749086] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 333.756487] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 333.765105] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 333.771808] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 333.795131] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 333.809407] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 333.817675] dma dma0chan0: dwc_prep_slave_sg
[ 333.821954] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 333.842307] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 333.856499] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 333.865375] dma dma0chan0: dwc_prep_slave_sg
[ 333.869655] dma dma0chan0: scanned 1 descriptors on freelist
[ 333.875324] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 333.897596] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 333.913174] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 333.921443] dma dma0chan0: dwc_prep_slave_sg
[ 333.925721] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 333.934376] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 333.941782] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 333.950401] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 333.957111] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 333.976320] ata3.00: configured for UDMA/33
[ 333.990244] ata3.00: device reported invalid CHS sector 0
[ 333.997438] ata3: EH complete
[ 334.000798] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 334.009682] dma dma0chan0: dwc_prep_slave_sg
[ 334.013960] dma dma0chan0: scanned 1 descriptors on freelist
[ 334.019631] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 364.074997] ata3: lost interrupt (Status 0x50)
[ 364.080422] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 364.088311] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.098397] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 364.105521] ata3.00: failed command: READ DMA
[ 364.110721] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 364.110721] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 364.125966] ata3.00: status: { DRDY }
[ 364.129669] ata3: hard resetting link
[ 364.134087] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 364.141956] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 364.151973] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 364.169453] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 364.185972] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 364.193835] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 364.404960] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 364.412818] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.428946] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.441938] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.454940] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.477975] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.490940] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.503938] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.516938] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.526406] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 364.534308] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 364.544450] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.552368] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 364.574519] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.587242] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.595116] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.605334] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 364.613333] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 364.624185] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.632274] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 364.642673] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.650618] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 364.658461] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.676303] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 364.690919] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 364.705111] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 364.713985] dma dma0chan0: dwc_prep_slave_sg
[ 364.718266] dma dma0chan0: scanned 1 descriptors on freelist
[ 364.723936] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 364.738059] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 364.753633] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 364.761903] dma dma0chan0: dwc_prep_slave_sg
[ 364.766181] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 364.774855] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 364.782259] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 364.790877] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 364.797579] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 364.829477] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 364.843748] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 364.852015] dma dma0chan0: dwc_prep_slave_sg
[ 364.856285] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 364.869331] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 364.883521] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 364.892398] dma dma0chan0: dwc_prep_slave_sg
[ 364.896678] dma dma0chan0: scanned 1 descriptors on freelist
[ 364.902346] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 364.926069] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 364.941647] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 364.949915] dma dma0chan0: dwc_prep_slave_sg
[ 364.954193] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 364.962855] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 364.970254] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 364.978872] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 364.985575] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 365.009141] ata3.00: configured for UDMA/33
[ 365.013402] ata3.00: device reported invalid CHS sector 0
[ 365.027037] ata3: EH complete
[ 365.034834] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 365.043729] dma dma0chan0: dwc_prep_slave_sg
[ 365.048005] dma dma0chan0: scanned 1 descriptors on freelist
[ 365.053675] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed289b00, count: 1 addr: 0xfffffffff6a18400
[ 396.074726] ata3: lost interrupt (Status 0x50)
[ 396.080426] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 396.088353] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.098535] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 396.105660] ata3.00: failed command: READ DMA
[ 396.110870] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 396.110870] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 396.136202] ata3.00: status: { DRDY }
[ 396.143199] ata3: hard resetting link
[ 396.147554] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 396.157166] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 396.165064] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 396.175324] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 396.185076] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 396.192973] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 396.403714] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 396.411577] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.427695] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.450730] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.463692] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.476692] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.489691] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.502691] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.515692] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.525133] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 396.533031] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 396.550755] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.566387] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 396.575836] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.586086] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.593991] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.604072] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 396.611976] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 396.622103] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.630291] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 396.640936] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.658807] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 396.671545] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.679555] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 396.689807] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 396.703989] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 396.712866] dma dma0chan0: dwc_prep_slave_sg
[ 396.717146] dma dma0chan0: scanned 1 descriptors on freelist
[ 396.722815] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 396.736788] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 396.752366] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 396.760635] dma dma0chan0: dwc_prep_slave_sg
[ 396.764914] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 396.773571] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 396.780974] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 396.789592] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 396.796295] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 396.828253] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 396.842523] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 396.850791] dma dma0chan0: dwc_prep_slave_sg
[ 396.855070] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 396.868286] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 396.882470] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 396.891347] dma dma0chan0: dwc_prep_slave_sg
[ 396.895626] dma dma0chan0: scanned 1 descriptors on freelist
[ 396.901296] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 396.923817] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 396.939398] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 396.947666] dma dma0chan0: dwc_prep_slave_sg
[ 396.951944] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 396.960594] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 396.967997] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 396.976615] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 396.983317] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 397.008136] ata3.00: configured for UDMA/33
[ 397.012438] ata3.00: device reported invalid CHS sector 0
[ 397.027023] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 397.042006] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x5 [current] [descriptor]
[ 397.049012] sd 3:0:0:0: [sdc] tag#0 ASC=0x21 ASCQ=0x4
[ 397.056588] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[ 397.064237] blk_update_request: I/O error, dev sdc, sector 0
[ 397.071627] Buffer I/O error on dev sdc, logical block 0, async page read
[ 397.078502] Dev sdc: unable to read RDB block 0
[ 397.084033] ata3: EH complete
[ 397.087612] sdc: unable to read partition table
[ 397.094132] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 397.103026] dma dma0chan0: dwc_prep_slave_sg
[ 397.107302] dma dma0chan0: scanned 1 descriptors on freelist
[ 397.112972] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed37fa00, count: 1 addr: 0xfffffffff6a18400
[ 428.074483] ata3: lost interrupt (Status 0x50)
[ 428.080190] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 428.088108] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.098163] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 428.105285] ata3.00: failed command: READ DMA EXT
[ 428.110996] ata3.00: cmd 25/00:08:80:5f:38/00:00:3a:00:00/e0 tag 0 dma 4096 in
[ 428.110996] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 428.125637] ata3.00: status: { DRDY }
[ 428.130285] ata3: hard resetting link
[ 428.144994] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 428.157723] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 428.165601] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 428.176050] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 428.185840] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 428.193744] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 428.404466] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 428.412323] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.428447] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.445520] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.466468] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.479445] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.492444] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.505445] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.518445] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.527891] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 428.535791] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 428.553510] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.569148] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 428.578597] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.588823] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.596725] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.606787] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 428.614693] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 428.624871] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.632959] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 428.643628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.661695] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 428.673855] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.681738] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 428.692080] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 428.706263] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 428.715140] dma dma0chan0: dwc_prep_slave_sg
[ 428.719419] dma dma0chan0: scanned 1 descriptors on freelist
[ 428.725089] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1c48, count: 1 addr: 0xfffffffff6a18400
[ 428.739567] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 428.755144] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 428.763413] dma dma0chan0: dwc_prep_slave_sg
[ 428.767691] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 428.776347] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 428.783752] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 428.792370] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 428.799072] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 428.830958] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 428.845231] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 428.853499] dma dma0chan0: dwc_prep_slave_sg
[ 428.857778] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 428.870730] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 428.884918] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 428.893794] dma dma0chan0: dwc_prep_slave_sg
[ 428.898074] dma dma0chan0: scanned 1 descriptors on freelist
[ 428.903744] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed2e1bb8, count: 1 addr: 0xfffffffff6a18400
[ 428.926568] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 428.942149] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 428.950418] dma dma0chan0: dwc_prep_slave_sg
[ 428.954696] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 428.963354] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 428.970757] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 428.979376] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 428.986086] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 429.010965] ata3.00: configured for UDMA/33
[ 429.015249] ata3.00: device reported invalid CHS sector 0
[ 429.029948] ata3: EH complete
[ 429.036692] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 429.045587] dma dma0chan0: dwc_prep_slave_sg
[ 429.049863] dma dma0chan0: scanned 1 descriptors on freelist
[ 429.055533] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed37fa00, count: 1 addr: 0xfffffffff6a18400
next prev parent reply other threads:[~2015-12-20 17:45 UTC|newest]
Thread overview: 154+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-15 23:25 [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel Mans Rullgard
2015-12-15 23:25 ` [PATCH 2/3] ata: sata_dwc_460ex: add phy support Mans Rullgard
2015-12-16 11:14 ` Sergei Shtylyov
2015-12-16 11:24 ` Måns Rullgård
2015-12-15 23:25 ` [PATCH 3/3] ata: sata_dwc_460ex: get rid of global data Mans Rullgard
2015-12-17 15:06 ` Andy Shevchenko
2015-12-17 15:19 ` Måns Rullgård
2015-12-17 15:37 ` Andy Shevchenko
2015-12-17 15:57 ` Måns Rullgård
2015-12-15 23:34 ` [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel Måns Rullgård
2015-12-17 14:59 ` Andy Shevchenko
2015-12-17 15:13 ` Måns Rullgård
2015-12-17 15:55 ` Andy Shevchenko
2015-12-17 16:04 ` Måns Rullgård
2015-12-17 16:53 ` Andy Shevchenko
2015-12-17 17:57 ` Julian Margetson
2015-12-17 17:59 ` Måns Rullgård
[not found] ` <567302E8.5050303@candw.ms>
2015-12-17 18:51 ` Måns Rullgård
[not found] ` <5673061A.4070700@candw.ms>
2015-12-17 19:53 ` Måns Rullgård
[not found] ` <56732C04.9040100@candw.ms>
2015-12-18 0:06 ` Måns Rullgård
2015-12-18 0:59 ` Julian Margetson
2015-12-18 1:38 ` Måns Rullgård
2015-12-18 11:48 ` Julian Margetson
2015-12-18 12:04 ` Måns Rullgård
2015-12-18 12:23 ` Andy Shevchenko
2015-12-18 12:49 ` Måns Rullgård
[not found] ` <5674271B.9090308@candw.ms>
2015-12-18 17:18 ` Måns Rullgård
2015-12-18 18:48 ` Andy Shevchenko
[not found] ` <56745BA4.1090607@candw.ms>
2015-12-18 22:33 ` Måns Rullgård
2015-12-18 22:49 ` Julian Margetson
2015-12-18 23:16 ` Måns Rullgård
2015-12-19 2:34 ` Andy Shevchenko
2015-12-19 11:39 ` Julian Margetson
2015-12-19 15:40 ` Måns Rullgård
2015-12-19 15:40 ` Måns Rullgård
[not found] ` <567585CD.9080105@candw.ms>
2015-12-19 16:39 ` Måns Rullgård
2015-12-19 16:39 ` Måns Rullgård
2015-12-19 16:56 ` Andy Shevchenko
2015-12-19 17:05 ` Måns Rullgård
2015-12-19 17:05 ` Måns Rullgård
2015-12-19 17:09 ` Julian Margetson
2015-12-19 17:11 ` Andy Shevchenko
2015-12-19 17:19 ` Måns Rullgård
2015-12-19 17:19 ` Måns Rullgård
2015-12-19 18:56 ` Julian Margetson
2015-12-19 19:07 ` Måns Rullgård
2015-12-19 19:07 ` Måns Rullgård
2015-12-19 20:16 ` Julian Margetson
2015-12-19 20:39 ` Andy Shevchenko
2015-12-19 20:41 ` Måns Rullgård
2015-12-19 20:41 ` Måns Rullgård
2015-12-19 20:48 ` Julian Margetson
2015-12-19 20:55 ` Julian Margetson
2015-12-20 17:11 ` Måns Rullgård
2015-12-20 17:11 ` Måns Rullgård
2015-12-20 17:41 ` Andy Shevchenko
2015-12-20 17:54 ` Måns Rullgård
2015-12-20 17:54 ` Måns Rullgård
2015-12-20 17:44 ` Julian Margetson [this message]
2015-12-20 18:49 ` Måns Rullgård
2015-12-20 18:49 ` Måns Rullgård
2015-12-20 20:17 ` Andy Shevchenko
2015-12-20 20:55 ` Andy Shevchenko
2015-12-21 1:19 ` Måns Rullgård
2015-12-21 1:19 ` Måns Rullgård
2015-12-21 19:08 ` Andy Shevchenko
2015-12-21 19:27 ` Måns Rullgård
2015-12-21 19:27 ` Måns Rullgård
2015-12-21 20:54 ` Andy Shevchenko
2015-12-21 21:06 ` Måns Rullgård
2015-12-21 21:06 ` Måns Rullgård
2015-12-22 0:08 ` Måns Rullgård
2015-12-22 0:08 ` Måns Rullgård
2015-12-22 10:58 ` Andy Shevchenko
2016-01-06 16:26 ` Måns Rullgård
2016-01-06 16:26 ` Måns Rullgård
2016-01-06 17:36 ` Andy Shevchenko
2016-01-07 9:34 ` Andy Shevchenko
2016-01-07 18:32 ` Måns Rullgård
2016-01-07 18:32 ` Måns Rullgård
2016-01-08 8:57 ` Andy Shevchenko
2016-01-08 10:57 ` Måns Rullgård
2016-01-08 10:57 ` Måns Rullgård
2016-01-20 18:50 ` Måns Rullgård
2016-01-20 18:50 ` Måns Rullgård
2016-01-20 19:23 ` Andy Shevchenko
2016-01-20 19:24 ` Måns Rullgård
2016-01-20 19:24 ` Måns Rullgård
2016-01-20 19:38 ` Andy Shevchenko
2016-01-20 19:46 ` Måns Rullgård
2016-01-20 19:46 ` Måns Rullgård
2016-01-20 19:51 ` Andy Shevchenko
2016-01-20 20:07 ` Måns Rullgård
2016-01-20 20:07 ` Måns Rullgård
2016-01-22 10:04 ` Andy Shevchenko
2016-01-22 11:13 ` Måns Rullgård
2016-01-22 11:13 ` Måns Rullgård
2016-01-22 11:56 ` Andy Shevchenko
2016-01-22 12:05 ` Måns Rullgård
2016-01-22 12:05 ` Måns Rullgård
2016-01-22 12:15 ` Andy Shevchenko
2015-12-21 16:48 ` Andy Shevchenko
2015-12-21 17:20 ` Julian Margetson
2015-12-21 17:26 ` Julian Margetson
2015-12-21 17:55 ` Andy Shevchenko
2015-12-21 18:23 ` Julian Margetson
2015-12-21 18:27 ` Måns Rullgård
2015-12-21 18:27 ` Måns Rullgård
2015-12-21 19:08 ` Julian Margetson
2015-12-21 19:19 ` Julian Margetson
2015-12-21 19:27 ` Måns Rullgård
2015-12-21 19:27 ` Måns Rullgård
2015-12-21 19:47 ` Julian Margetson
2015-12-21 20:25 ` Andy Shevchenko
2015-12-21 20:29 ` Julian Margetson
2016-01-22 10:07 ` Andy Shevchenko
2015-12-21 20:33 ` Måns Rullgård
2015-12-21 20:33 ` Måns Rullgård
2015-12-21 18:25 ` Måns Rullgård
2015-12-21 18:25 ` Måns Rullgård
2015-12-21 0:47 ` Måns Rullgård
2015-12-21 0:47 ` Måns Rullgård
2015-12-21 0:53 ` Måns Rullgård
2015-12-21 0:53 ` Måns Rullgård
2015-12-21 0:58 ` Måns Rullgård
2015-12-21 0:58 ` Måns Rullgård
2015-12-21 8:40 ` Andy Shevchenko
2015-12-21 12:15 ` Måns Rullgård
2015-12-21 12:15 ` Måns Rullgård
2015-12-21 17:24 ` Andy Shevchenko
2015-12-21 18:16 ` Måns Rullgård
2015-12-21 18:16 ` Måns Rullgård
2015-12-21 19:23 ` Andy Shevchenko
2015-12-21 19:50 ` Måns Rullgård
2015-12-21 19:50 ` Måns Rullgård
[not found] ` <5677D447.40906@candw.ms>
2015-12-21 12:16 ` Måns Rullgård
2015-12-21 12:16 ` Måns Rullgård
2015-12-21 13:18 ` Julian Margetson
2015-12-21 13:24 ` Måns Rullgård
2015-12-21 13:24 ` Måns Rullgård
2015-12-21 14:40 ` Julian Margetson
2015-12-21 15:24 ` Måns Rullgård
2015-12-21 15:24 ` Måns Rullgård
2015-12-21 16:44 ` Andy Shevchenko
2015-12-21 18:19 ` Måns Rullgård
2015-12-21 18:19 ` Måns Rullgård
2015-12-18 12:33 ` Julian Margetson
2015-12-18 12:38 ` Andy Shevchenko
2015-12-18 12:45 ` Måns Rullgård
[not found] ` <56740F9F.5020500@candw.ms>
2015-12-18 14:24 ` Andy Shevchenko
2015-12-18 14:27 ` Måns Rullgård
2015-12-18 10:08 ` Andy Shevchenko
2015-12-18 11:24 ` Måns Rullgård
2015-12-17 14:58 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5676E906.1060603@candw.ms \
--to=runaway@candw.ms \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy.shevchenko@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mans@mansr.com \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.