All of lore.kernel.org
 help / color / mirror / Atom feed
From: Libin Yang <libin.yang@linux.intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, intel-gfx@lists.freedesktop.org,
	daniel.vetter@intel.com, Dave Airlie <airlied@redhat.com>
Subject: Re: [alsa-devel] [PATCH V4 2/2] drm/i915: start adding dp mst audio
Date: Mon, 21 Dec 2015 16:31:03 +0800	[thread overview]
Message-ID: <5677B8C7.3090008@linux.intel.com> (raw)
In-Reply-To: <s5hy4d1jdcu.wl-tiwai@suse.de>


Sorry, I missed the emails.

On 12/11/2015 09:58 PM, Takashi Iwai wrote:
> On Fri, 11 Dec 2015 11:43:51 +0100,
> Takashi Iwai wrote:
>>
>> On Fri, 11 Dec 2015 07:07:53 +0100,
>> Libin Yang wrote:
>>>
>>>>>> diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
>>>>>> index 9aa83e7..5ad2e66 100644
>>>>>> --- a/drivers/gpu/drm/i915/intel_audio.c
>>>>>> +++ b/drivers/gpu/drm/i915/intel_audio.c
>>>>>> @@ -262,7 +262,8 @@ static void hsw_audio_codec_disable(struct intel_encoder *encoder)
>>>>>>    	tmp |= AUD_CONFIG_N_PROG_ENABLE;
>>>>>>    	tmp &= ~AUD_CONFIG_UPPER_N_MASK;
>>>>>>    	tmp &= ~AUD_CONFIG_LOWER_N_MASK;
>>>>>> -	if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
>>>>>> +	if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT) ||
>>>>>> +	    intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DP_MST))
>>>>>>    		tmp |= AUD_CONFIG_N_VALUE_INDEX;
>>
>> The same check is missing in hsw_audio_codec_enable()?
>>
>>>>>>    	I915_WRITE(HSW_AUD_CFG(pipe), tmp);
>>>>>>
>>>>>> @@ -474,7 +475,8 @@ static void ilk_audio_codec_enable(struct drm_connector *connector,
>>>>>>    	tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
>>>>>>    	tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
>>>>>>    	tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
>>>>>> -	if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
>>>>>> +	if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT) ||
>>>>>> +	    intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DP_MST))
>>>>>>    		tmp |= AUD_CONFIG_N_VALUE_INDEX;
>>
>> ... and missing for ilk_audio_codec_disable()?

Based on the discussion, I think you and Jani are right. It should be 
in hsw_audio_codec_enable() and not in ild_audio_codec_disable().

>>
>>
>>>>>>    	else
>>>>>>    		tmp |= audio_config_hdmi_pixel_clock(adjusted_mode);
>>>>>> @@ -512,7 +514,8 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
>>>>>>
>>>>>>    	/* ELD Conn_Type */
>>>>>>    	connector->eld[5] &= ~(3 << 2);
>>>>>> -	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
>>>>>> +	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
>>>>>> +	    intel_pipe_has_type(crtc, INTEL_OUTPUT_DP_MST))
>>
>> IMO, it's better to have a macro to cover this two-line check instead
>> of open-coding at each place.  We'll have 5 places in the end.

OK, I will use a macro.

>
> Also, this patch still has an issue about the encoder type, namely, it
> passes intel_encoder from MST, where you can't apply
> enc_to_dig_port().  We need another help to get the digital port
> depending on the encoder type, e.g.
>
> static struct intel_digital_port *
> intel_encoder_to_dig_port(struct intel_encoder *intel_encoder)
> {
> 	struct drm_encoder *encoder = &intel_encoder->base;
>
> 	if (intel_encoder->type == INTEL_OUTPUT_DP_MST)
> 		return enc_to_mst(encoder)->primary;
> 	return enc_to_dig_port(encoder);
> }

Yes, I will fix it in the new version patch.

Best Regards,
Libin

>
>
> Takashi
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-12-21  8:31 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-02  6:09 [PATCH V4 1/2] dp/mst: add SDP stream support libin.yang
2015-12-02  6:09 ` [PATCH V4 2/2] drm/i915: start adding dp mst audio libin.yang
2015-12-08  8:01   ` Libin Yang
2015-12-10  9:02     ` Daniel Vetter
2015-12-11  6:07       ` Libin Yang
2015-12-11 10:43         ` Takashi Iwai
2015-12-11 13:58           ` Takashi Iwai
2015-12-21  8:31             ` Libin Yang [this message]
2015-12-14  9:33           ` Jani Nikula
2015-12-14  9:40             ` Takashi Iwai
2015-12-14 10:34               ` Jani Nikula
2015-12-14 10:41                 ` Takashi Iwai
2015-12-11 14:05         ` Takashi Iwai
2015-12-13  8:27           ` Takashi Iwai
2015-12-11  6:09 ` [PATCH V4 1/2] dp/mst: add SDP stream support Libin Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5677B8C7.3090008@linux.intel.com \
    --to=libin.yang@linux.intel.com \
    --cc=airlied@redhat.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=daniel.vetter@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.