On 12/23/2015 11:35 AM, Faisal Latif wrote: > On Wed, Dec 23, 2015 at 11:09:56AM -0500, Doug Ledford wrote: >> On 12/21/2015 06:13 PM, Faisal Latif wrote: >>> This (V1) series contains the addition of the i40iw.ko driver after >>> incorporating the feedback from Christoph Hellwig and Joe Perches for >>> initial series. >>> >>> This driver provides iWARP RDMA functionality for the Intel(R) X722 Ethernet >>> controller for PCI Physical Functions. It also has support for Virtual >>> Function driver (i40iwvf.ko), which that will be part of separate patch >>> series. >>> >>> It cooperates with the Intel(R) X722 base driver (i40e.ko) to allocate >>> resources and program the controller. >>> >>> This series include 1 patch to i40e.ko to provide interface support to >>> i40iw.ko. The interface provides a driver registration mechanism, resource >>> allocations, and device reset coordination mechanisms. >>> >>> This patch series is based on Doug Ledford's k.o/for-4.5. >> >> My apologies Faisal. I had pushed that branch to github to get 0-day >> testing, but hadn't committed it to my k.o tree as it wasn't fully >> finalized (I was waiting for Or to get his chance to respond to it). >> Once Or responded, I ended up taking his patchset instead, which means >> you need to adjust your patches accordingly. >> > > Thanks Doug for the update, I will provide new patch series for latest > k.o. Also will make sure of shallow threading for the series. I should > have used V2 for this series instead of V1 and next series with k.o will > make it proper with V3. I'm going to repush my tree in 10 or 15 minutes if you haven't done the rebase yet. If so, the tree I pushed earlier this morning should be good enough. -- Doug Ledford GPG KeyID: 0E572FDD