From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tetsuya Mukawa Subject: Re: [PATCH v5 1/3] vhost: Add callback and private data for vhost PMD Date: Thu, 24 Dec 2015 13:23:51 +0900 Message-ID: <567B7357.3040404@igel.co.jp> References: <1448355603-21275-1-git-send-email-mukawa@igel.co.jp> <1448355603-21275-2-git-send-email-mukawa@igel.co.jp> <20151217114223.GC29571@yliu-dev.sh.intel.com> <56737A5E.1030803@igel.co.jp> <20151218041536.GI29571@yliu-dev.sh.intel.com> <56738B5C.1030206@igel.co.jp> <20151222034158.GH18863@yliu-dev.sh.intel.com> <567B61D6.1090806@igel.co.jp> <20151224040030.GB18863@yliu-dev.sh.intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Cc: dev@dpdk.org, ann.zhuangyanying@huawei.com To: Yuanhan Liu Return-path: Received: from mail-pf0-f177.google.com (mail-pf0-f177.google.com [209.85.192.177]) by dpdk.org (Postfix) with ESMTP id 6F7CA5A57 for ; Thu, 24 Dec 2015 05:23:52 +0100 (CET) Received: by mail-pf0-f177.google.com with SMTP id 65so17995406pff.3 for ; Wed, 23 Dec 2015 20:23:52 -0800 (PST) In-Reply-To: <20151224040030.GB18863@yliu-dev.sh.intel.com> List-Id: patches and discussions about DPDK List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" On 2015/12/24 13:00, Yuanhan Liu wrote: > On Thu, Dec 24, 2015 at 12:09:10PM +0900, Tetsuya Mukawa wrote: >> On 2015/12/22 13:47, Rich Lane wrote: >>> On Mon, Dec 21, 2015 at 7:41 PM, Yuanhan Liu >>> wrote: >>> >>>> On Fri, Dec 18, 2015 at 10:01:25AM -0800, Rich Lane wrote: >>>>> I'm using the vhost callbacks and struct virtio_net with the vhost PMD >>>> in a few >>>>> ways: >>>> Rich, thanks for the info! >>>> >>>>> 1. new_device/destroy_device: Link state change (will be covered by the >>>> link >>>>> status interrupt). >>>>> 2. new_device: Add first queue to datapath. >>>> I'm wondering why vring_state_changed() is not used, as it will also be >>>> triggered at the beginning, when the default queue (the first queue) is >>>> enabled. >>>> >>> Turns out I'd misread the code and it's already using the >>> vring_state_changed callback for the >>> first queue. Not sure if this is intentional but vring_state_changed is >>> called for the first queue >>> before new_device. >>> >>> >>>>> 3. vring_state_changed: Add/remove queue to datapath. >>>>> 4. destroy_device: Remove all queues (vring_state_changed is not called >>>> when >>>>> qemu is killed). >>>> I had a plan to invoke vring_state_changed() to disable all vrings >>>> when destroy_device() is called. >>>> >>> That would be good. >>> >>> >>>>> 5. new_device and struct virtio_net: Determine NUMA node of the VM. >>>> You can get the 'struct virtio_net' dev from all above callbacks. >>> >>>> 1. Link status interrupt. >>>> >>>> To vhost pmd, new_device()/destroy_device() equals to the link status >>>> interrupt, where new_device() is a link up, and destroy_device() is link >>>> down(). >>>> >>>> >>>>> 2. New queue_state_changed callback. Unlike vring_state_changed this >>>> should >>>>> cover the first queue at new_device and removal of all queues at >>>>> destroy_device. >>>> As stated above, vring_state_changed() should be able to do that, except >>>> the one on destroy_device(), which is not done yet. >>>> >>>>> 3. Per-queue or per-device NUMA node info. >>>> You can query the NUMA node info implicitly by get_mempolicy(); check >>>> numa_realloc() at lib/librte_vhost/virtio-net.c for reference. >>>> >>> Your suggestions are exactly how my application is already working. I was >>> commenting on the >>> proposed changes to the vhost PMD API. I would prefer to >>> use RTE_ETH_EVENT_INTR_LSC >>> and rte_eth_dev_socket_id for consistency with other NIC drivers, instead >>> of these vhost-specific >>> hacks. The queue state change callback is the one new API that needs to be >>> added because >>> normal NICs don't have this behavior. >>> >>> You could add another rte_eth_event_type for the queue state change >>> callback, and pass the >>> queue ID, RX/TX direction, and enable bit through cb_arg. >> Hi Rich, >> >> So far, EAL provides rte_eth_dev_callback_register() for event handling. >> DPDK app can register callback handler and "callback argument". >> And EAL will call callback handler with the argument. >> Anyway, vhost library and PMD cannot change the argument. > Yes, the event callback argument is provided from application, where it > has no way to know info you mentioned above, like queue ID, RX/TX direction. > > For that, we may need introduce another structure to note all above > info, and embed it to virtio_net struct. > >> I guess the callback handler will need to call ethdev APIs to know what >> causes the interrupt. >> Probably rte_eth_dev_socket_id() is to know numa_node, and >> rte_eth_dev_info_get() is to know the number of queues. >> Is this okay for your case? > I don't think that's enough, and I think Rich has already given all info > needed to a queue change interrupt to you. (That would also answer your > questions in another email) > > --yliu Thanks. Yes, I agree we need to provides such information through "struct virtio_net". And the callback handler needs to handle the vhost specific structure directly. Probably it's difficult to remove "struct virtio_net" from callback handler of DPDK app. This is the point I want to describe. Tetsuya,