From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] Move all command code into its own directory
Date: Mon, 18 Jan 2016 06:38:03 +0100 [thread overview]
Message-ID: <569C7A3B.50507@denx.de> (raw)
In-Reply-To: <1453089233-29419-2-git-send-email-sjg@chromium.org>
Hello Simon,
Am 18.01.2016 um 04:53 schrieb Simon Glass:
> There are a lot of unrelated files in common, including all of the commands.
> Moving them into their own directory makes them easier to find and is more
> logical.
>
> Some commands include non-command code, such as cmd_scsi.c. This should be
> sorted out at some point so that the function can be enabled with or without
> the associated command.
>
> Unfortunately, with m68k I get this error:
>
> m68k: + M5329AFEE
> +arch/m68k/cpu/mcf532x/start.o: In function `_start':
> +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o
>
> I hope someone can shed some light on what this means. I hope it isn't
> depending on the position of code in the image.
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
Thanks!
Reviewed-by: Heiko Schocher <hs@denx.de>
bye,
Heiko
>
> Kconfig | 2 +
> Makefile | 1 +
> cmd/Kconfig | 585 +++++++++++++++++++++++++++++++
> cmd/Makefile | 166 +++++++++
> {common => cmd}/cmd_aes.c | 0
> {common => cmd}/cmd_ambapp.c | 0
> {common => cmd}/cmd_armflash.c | 0
> {common => cmd}/cmd_bdinfo.c | 0
> {common => cmd}/cmd_bedbug.c | 0
> {common => cmd}/cmd_blob.c | 0
> {common => cmd}/cmd_bmp.c | 0
> {common => cmd}/cmd_boot.c | 0
> {common => cmd}/cmd_bootldr.c | 0
> {common => cmd}/cmd_bootm.c | 0
> {common => cmd}/cmd_bootmenu.c | 0
> {common => cmd}/cmd_bootstage.c | 0
> {common => cmd}/cmd_cache.c | 0
> {common => cmd}/cmd_cbfs.c | 0
> {common => cmd}/cmd_clk.c | 0
> {common => cmd}/cmd_console.c | 0
> {common => cmd}/cmd_cplbinfo.c | 0
> {common => cmd}/cmd_cpu.c | 0
> {common => cmd}/cmd_cramfs.c | 0
> {common => cmd}/cmd_dataflash_mmc_mux.c | 0
> {common => cmd}/cmd_date.c | 0
> {common => cmd}/cmd_dcr.c | 0
> {common => cmd}/cmd_demo.c | 0
> {common => cmd}/cmd_dfu.c | 0
> {common => cmd}/cmd_diag.c | 0
> {common => cmd}/cmd_disk.c | 0
> {common => cmd}/cmd_display.c | 0
> {common => cmd}/cmd_dtt.c | 0
> {common => cmd}/cmd_echo.c | 0
> {common => cmd}/cmd_eeprom.c | 0
> {common => cmd}/cmd_efi.c | 0
> {common => cmd}/cmd_elf.c | 0
> {common => cmd}/cmd_ethsw.c | 0
> {common => cmd}/cmd_exit.c | 0
> {common => cmd}/cmd_ext2.c | 0
> {common => cmd}/cmd_ext4.c | 0
> {common => cmd}/cmd_fastboot.c | 0
> {common => cmd}/cmd_fat.c | 0
> {common => cmd}/cmd_fdc.c | 0
> {common => cmd}/cmd_fdt.c | 0
> {common => cmd}/cmd_fitupd.c | 0
> {common => cmd}/cmd_flash.c | 0
> {common => cmd}/cmd_fpga.c | 0
> {common => cmd}/cmd_fpgad.c | 0
> {common => cmd}/cmd_fs.c | 0
> {common => cmd}/cmd_fs_uuid.c | 0
> {common => cmd}/cmd_fuse.c | 0
> {common => cmd}/cmd_gettime.c | 0
> {common => cmd}/cmd_gpio.c | 0
> {common => cmd}/cmd_gpt.c | 0
> {common => cmd}/cmd_hash.c | 0
> {common => cmd}/cmd_help.c | 0
> {common => cmd}/cmd_host.c | 0
> {common => cmd}/cmd_i2c.c | 0
> {common => cmd}/cmd_ide.c | 0
> {common => cmd}/cmd_immap.c | 0
> {common => cmd}/cmd_ini.c | 0
> {common => cmd}/cmd_io.c | 0
> {common => cmd}/cmd_iotrace.c | 0
> {common => cmd}/cmd_irq.c | 0
> {common => cmd}/cmd_itest.c | 0
> {common => cmd}/cmd_jffs2.c | 0
> {common => cmd}/cmd_ldrinfo.c | 0
> {common => cmd}/cmd_led.c | 0
> {common => cmd}/cmd_license.c | 0
> {common => cmd}/cmd_load.c | 0
> {common => cmd}/cmd_log.c | 0
> {common => cmd}/cmd_lzmadec.c | 0
> {common => cmd}/cmd_mac.c | 0
> {common => cmd}/cmd_md5sum.c | 0
> {common => cmd}/cmd_mdio.c | 0
> {common => cmd}/cmd_mem.c | 0
> {common => cmd}/cmd_mfsl.c | 0
> {common => cmd}/cmd_mii.c | 0
> {common => cmd}/cmd_misc.c | 0
> {common => cmd}/cmd_mmc.c | 0
> {common => cmd}/cmd_mmc_spi.c | 0
> {common => cmd}/cmd_mp.c | 0
> {common => cmd}/cmd_mtdparts.c | 0
> {common => cmd}/cmd_nand.c | 0
> {common => cmd}/cmd_net.c | 0
> {common => cmd}/cmd_nvedit.c | 0
> {common => cmd}/cmd_onenand.c | 0
> {common => cmd}/cmd_otp.c | 0
> {common => cmd}/cmd_part.c | 0
> {common => cmd}/cmd_pci.c | 0
> {common => cmd}/cmd_pcmcia.c | 0
> {common => cmd}/cmd_pmic.c | 0
> {common => cmd}/cmd_portio.c | 0
> {common => cmd}/cmd_pxe.c | 0
> {common => cmd}/cmd_read.c | 0
> {common => cmd}/cmd_reginfo.c | 0
> {common => cmd}/cmd_regulator.c | 0
> {common => cmd}/cmd_reiser.c | 0
> {common => cmd}/cmd_remoteproc.c | 0
> {common => cmd}/cmd_sata.c | 0
> {common => cmd}/cmd_scsi.c | 0
> {common => cmd}/cmd_setexpr.c | 0
> {common => cmd}/cmd_sf.c | 0
> {common => cmd}/cmd_sha1sum.c | 0
> {common => cmd}/cmd_softswitch.c | 0
> {common => cmd}/cmd_sound.c | 0
> {common => cmd}/cmd_source.c | 0
> {common => cmd}/cmd_spi.c | 0
> {common => cmd}/cmd_spibootldr.c | 0
> {common => cmd}/cmd_spl.c | 0
> {common => cmd}/cmd_strings.c | 0
> {common => cmd}/cmd_terminal.c | 0
> {common => cmd}/cmd_test.c | 0
> {common => cmd}/cmd_thordown.c | 0
> {common => cmd}/cmd_time.c | 0
> {common => cmd}/cmd_tpm.c | 0
> {common => cmd}/cmd_tpm_test.c | 0
> {common => cmd}/cmd_trace.c | 0
> {common => cmd}/cmd_tsi148.c | 0
> {common => cmd}/cmd_ubi.c | 0
> {common => cmd}/cmd_ubifs.c | 0
> {common => cmd}/cmd_universe.c | 0
> {common => cmd}/cmd_unzip.c | 0
> {common => cmd}/cmd_usb.c | 0
> {common => cmd}/cmd_usb_mass_storage.c | 0
> {common => cmd}/cmd_version.c | 0
> {common => cmd}/cmd_ximg.c | 0
> {common => cmd}/cmd_yaffs2.c | 0
> {common => cmd}/cmd_zfs.c | 0
> {common => cmd}/cmd_zip.c | 0
> common/Kconfig | 586 --------------------------------
> common/Makefile | 156 +--------
> scripts/Makefile.spl | 2 +-
> 133 files changed, 761 insertions(+), 737 deletions(-)
> create mode 100644 cmd/Kconfig
> create mode 100644 cmd/Makefile
> rename {common => cmd}/cmd_aes.c (100%)
> rename {common => cmd}/cmd_ambapp.c (100%)
> rename {common => cmd}/cmd_armflash.c (100%)
> rename {common => cmd}/cmd_bdinfo.c (100%)
> rename {common => cmd}/cmd_bedbug.c (100%)
> rename {common => cmd}/cmd_blob.c (100%)
> rename {common => cmd}/cmd_bmp.c (100%)
> rename {common => cmd}/cmd_boot.c (100%)
> rename {common => cmd}/cmd_bootldr.c (100%)
> rename {common => cmd}/cmd_bootm.c (100%)
> rename {common => cmd}/cmd_bootmenu.c (100%)
> rename {common => cmd}/cmd_bootstage.c (100%)
> rename {common => cmd}/cmd_cache.c (100%)
> rename {common => cmd}/cmd_cbfs.c (100%)
> rename {common => cmd}/cmd_clk.c (100%)
> rename {common => cmd}/cmd_console.c (100%)
> rename {common => cmd}/cmd_cplbinfo.c (100%)
> rename {common => cmd}/cmd_cpu.c (100%)
> rename {common => cmd}/cmd_cramfs.c (100%)
> rename {common => cmd}/cmd_dataflash_mmc_mux.c (100%)
> rename {common => cmd}/cmd_date.c (100%)
> rename {common => cmd}/cmd_dcr.c (100%)
> rename {common => cmd}/cmd_demo.c (100%)
> rename {common => cmd}/cmd_dfu.c (100%)
> rename {common => cmd}/cmd_diag.c (100%)
> rename {common => cmd}/cmd_disk.c (100%)
> rename {common => cmd}/cmd_display.c (100%)
> rename {common => cmd}/cmd_dtt.c (100%)
> rename {common => cmd}/cmd_echo.c (100%)
> rename {common => cmd}/cmd_eeprom.c (100%)
> rename {common => cmd}/cmd_efi.c (100%)
> rename {common => cmd}/cmd_elf.c (100%)
> rename {common => cmd}/cmd_ethsw.c (100%)
> rename {common => cmd}/cmd_exit.c (100%)
> rename {common => cmd}/cmd_ext2.c (100%)
> rename {common => cmd}/cmd_ext4.c (100%)
> rename {common => cmd}/cmd_fastboot.c (100%)
> rename {common => cmd}/cmd_fat.c (100%)
> rename {common => cmd}/cmd_fdc.c (100%)
> rename {common => cmd}/cmd_fdt.c (100%)
> rename {common => cmd}/cmd_fitupd.c (100%)
> rename {common => cmd}/cmd_flash.c (100%)
> rename {common => cmd}/cmd_fpga.c (100%)
> rename {common => cmd}/cmd_fpgad.c (100%)
> rename {common => cmd}/cmd_fs.c (100%)
> rename {common => cmd}/cmd_fs_uuid.c (100%)
> rename {common => cmd}/cmd_fuse.c (100%)
> rename {common => cmd}/cmd_gettime.c (100%)
> rename {common => cmd}/cmd_gpio.c (100%)
> rename {common => cmd}/cmd_gpt.c (100%)
> rename {common => cmd}/cmd_hash.c (100%)
> rename {common => cmd}/cmd_help.c (100%)
> rename {common => cmd}/cmd_host.c (100%)
> rename {common => cmd}/cmd_i2c.c (100%)
> rename {common => cmd}/cmd_ide.c (100%)
> rename {common => cmd}/cmd_immap.c (100%)
> rename {common => cmd}/cmd_ini.c (100%)
> rename {common => cmd}/cmd_io.c (100%)
> rename {common => cmd}/cmd_iotrace.c (100%)
> rename {common => cmd}/cmd_irq.c (100%)
> rename {common => cmd}/cmd_itest.c (100%)
> rename {common => cmd}/cmd_jffs2.c (100%)
> rename {common => cmd}/cmd_ldrinfo.c (100%)
> rename {common => cmd}/cmd_led.c (100%)
> rename {common => cmd}/cmd_license.c (100%)
> rename {common => cmd}/cmd_load.c (100%)
> rename {common => cmd}/cmd_log.c (100%)
> rename {common => cmd}/cmd_lzmadec.c (100%)
> rename {common => cmd}/cmd_mac.c (100%)
> rename {common => cmd}/cmd_md5sum.c (100%)
> rename {common => cmd}/cmd_mdio.c (100%)
> rename {common => cmd}/cmd_mem.c (100%)
> rename {common => cmd}/cmd_mfsl.c (100%)
> rename {common => cmd}/cmd_mii.c (100%)
> rename {common => cmd}/cmd_misc.c (100%)
> rename {common => cmd}/cmd_mmc.c (100%)
> rename {common => cmd}/cmd_mmc_spi.c (100%)
> rename {common => cmd}/cmd_mp.c (100%)
> rename {common => cmd}/cmd_mtdparts.c (100%)
> rename {common => cmd}/cmd_nand.c (100%)
> rename {common => cmd}/cmd_net.c (100%)
> rename {common => cmd}/cmd_nvedit.c (100%)
> rename {common => cmd}/cmd_onenand.c (100%)
> rename {common => cmd}/cmd_otp.c (100%)
> rename {common => cmd}/cmd_part.c (100%)
> rename {common => cmd}/cmd_pci.c (100%)
> rename {common => cmd}/cmd_pcmcia.c (100%)
> rename {common => cmd}/cmd_pmic.c (100%)
> rename {common => cmd}/cmd_portio.c (100%)
> rename {common => cmd}/cmd_pxe.c (100%)
> rename {common => cmd}/cmd_read.c (100%)
> rename {common => cmd}/cmd_reginfo.c (100%)
> rename {common => cmd}/cmd_regulator.c (100%)
> rename {common => cmd}/cmd_reiser.c (100%)
> rename {common => cmd}/cmd_remoteproc.c (100%)
> rename {common => cmd}/cmd_sata.c (100%)
> rename {common => cmd}/cmd_scsi.c (100%)
> rename {common => cmd}/cmd_setexpr.c (100%)
> rename {common => cmd}/cmd_sf.c (100%)
> rename {common => cmd}/cmd_sha1sum.c (100%)
> rename {common => cmd}/cmd_softswitch.c (100%)
> rename {common => cmd}/cmd_sound.c (100%)
> rename {common => cmd}/cmd_source.c (100%)
> rename {common => cmd}/cmd_spi.c (100%)
> rename {common => cmd}/cmd_spibootldr.c (100%)
> rename {common => cmd}/cmd_spl.c (100%)
> rename {common => cmd}/cmd_strings.c (100%)
> rename {common => cmd}/cmd_terminal.c (100%)
> rename {common => cmd}/cmd_test.c (100%)
> rename {common => cmd}/cmd_thordown.c (100%)
> rename {common => cmd}/cmd_time.c (100%)
> rename {common => cmd}/cmd_tpm.c (100%)
> rename {common => cmd}/cmd_tpm_test.c (100%)
> rename {common => cmd}/cmd_trace.c (100%)
> rename {common => cmd}/cmd_tsi148.c (100%)
> rename {common => cmd}/cmd_ubi.c (100%)
> rename {common => cmd}/cmd_ubifs.c (100%)
> rename {common => cmd}/cmd_universe.c (100%)
> rename {common => cmd}/cmd_unzip.c (100%)
> rename {common => cmd}/cmd_usb.c (100%)
> rename {common => cmd}/cmd_usb_mass_storage.c (100%)
> rename {common => cmd}/cmd_version.c (100%)
> rename {common => cmd}/cmd_ximg.c (100%)
> rename {common => cmd}/cmd_yaffs2.c (100%)
> rename {common => cmd}/cmd_zfs.c (100%)
> rename {common => cmd}/cmd_zip.c (100%)
>
> diff --git a/Kconfig b/Kconfig
> index 821b464..d5e503a 100644
> --- a/Kconfig
> +++ b/Kconfig
> @@ -224,6 +224,8 @@ endmenu # Boot images
>
> source "common/Kconfig"
>
> +source "cmd/Kconfig"
> +
> source "dts/Kconfig"
>
> source "net/Kconfig"
> diff --git a/Makefile b/Makefile
> index 5882c30..6a67efb 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -667,6 +667,7 @@ libs-y += drivers/usb/musb/
> libs-y += drivers/usb/musb-new/
> libs-y += drivers/usb/phy/
> libs-y += drivers/usb/ulpi/
> +libs-y += cmd/
> libs-y += common/
> libs-$(CONFIG_API) += api/
> libs-$(CONFIG_HAS_POST) += post/
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> new file mode 100644
> index 0000000..2ed0263
> --- /dev/null
> +++ b/cmd/Kconfig
> @@ -0,0 +1,585 @@
> +menu "Command line interface"
> +
> +config HUSH_PARSER
> + bool "Use hush shell"
> + select SYS_HUSH_PARSER
> + help
> + This option enables the "hush" shell (from Busybox) as command line
> + interpreter, thus enabling powerful command line syntax like
> + if...then...else...fi conditionals or `&&' and '||'
> + constructs ("shell scripts").
> +
> + If disabled, you get the old, much simpler behaviour with a somewhat
> + smaller memory footprint.
> +
> +config SYS_HUSH_PARSER
> + bool
> + help
> + Backward compatibility.
> +
> +config SYS_PROMPT
> + string "Shell prompt"
> + default "=> "
> + help
> + This string is displayed in the command line to the left of the
> + cursor.
> +
> +menu "Autoboot options"
> +
> +config AUTOBOOT_KEYED
> + bool "Stop autobooting via specific input key / string"
> + default n
> + help
> + This option enables stopping (aborting) of the automatic
> + boot feature only by issuing a specific input key or
> + string. If not enabled, any input key will abort the
> + U-Boot automatic booting process and bring the device
> + to the U-Boot prompt for user input.
> +
> +config AUTOBOOT_PROMPT
> + string "Autoboot stop prompt"
> + depends on AUTOBOOT_KEYED
> + default "Autoboot in %d seconds\\n"
> + help
> + This string is displayed before the boot delay selected by
> + CONFIG_BOOTDELAY starts. If it is not defined there is no
> + output indicating that autoboot is in progress.
> +
> + Note that this define is used as the (only) argument to a
> + printf() call, so it may contain '%' format specifications,
> + provided that it also includes, sepearated by commas exactly
> + like in a printf statement, the required arguments. It is
> + the responsibility of the user to select only such arguments
> + that are valid in the given context.
> +
> +config AUTOBOOT_ENCRYPTION
> + bool "Enable encryption in autoboot stopping"
> + depends on AUTOBOOT_KEYED
> + default n
> +
> +config AUTOBOOT_DELAY_STR
> + string "Delay autobooting via specific input key / string"
> + depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
> + help
> + This option delays the automatic boot feature by issuing
> + a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
> + or the environment variable "bootdelaykey" is specified
> + and this string is received from console input before
> + autoboot starts booting, U-Boot gives a command prompt. The
> + U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
> + used, otherwise it never times out.
> +
> +config AUTOBOOT_STOP_STR
> + string "Stop autobooting via specific input key / string"
> + depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
> + help
> + This option enables stopping (aborting) of the automatic
> + boot feature only by issuing a specific input key or
> + string. If CONFIG_AUTOBOOT_STOP_STR or the environment
> + variable "bootstopkey" is specified and this string is
> + received from console input before autoboot starts booting,
> + U-Boot gives a command prompt. The U-Boot prompt never
> + times out, even if CONFIG_BOOT_RETRY_TIME is used.
> +
> +config AUTOBOOT_KEYED_CTRLC
> + bool "Enable Ctrl-C autoboot interruption"
> + depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
> + default n
> + help
> + This option allows for the boot sequence to be interrupted
> + by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
> + Setting this variable provides an escape sequence from the
> + limited "password" strings.
> +
> +config AUTOBOOT_STOP_STR_SHA256
> + string "Stop autobooting via SHA256 encrypted password"
> + depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
> + help
> + This option adds the feature to only stop the autobooting,
> + and therefore boot into the U-Boot prompt, when the input
> + string / password matches a values that is encypted via
> + a SHA256 hash and saved in the environment.
> +
> +endmenu
> +
> +comment "Commands"
> +
> +menu "Info commands"
> +
> +config CMD_BDI
> + bool "bdinfo"
> + default y
> + help
> + Print board info
> +
> +config CMD_CONSOLE
> + bool "coninfo"
> + default y
> + help
> + Print console devices and information.
> +
> +config CMD_CPU
> + bool "cpu"
> + help
> + Print information about available CPUs. This normally shows the
> + number of CPUs, type (e.g. manufacturer, architecture, product or
> + internal name) and clock frequency. Other information may be
> + available depending on the CPU driver.
> +
> +config CMD_LICENSE
> + bool "license"
> + help
> + Print GPL license text
> +
> +endmenu
> +
> +menu "Boot commands"
> +
> +config CMD_BOOTD
> + bool "bootd"
> + default y
> + help
> + Run the command stored in the environment "bootcmd", i.e.
> + "bootd" does the same thing as "run bootcmd".
> +
> +config CMD_BOOTM
> + bool "bootm"
> + default y
> + help
> + Boot an application image from the memory.
> +
> +config CMD_ELF
> + bool "bootelf, bootvx"
> + default y
> + help
> + Boot an ELF/vxWorks image from the memory.
> +
> +config CMD_GO
> + bool "go"
> + default y
> + help
> + Start an application at a given address.
> +
> +config CMD_RUN
> + bool "run"
> + default y
> + help
> + Run the command in the given environment variable.
> +
> +config CMD_IMI
> + bool "iminfo"
> + default y
> + help
> + Print header information for application image.
> +
> +config CMD_IMLS
> + bool "imls"
> + default y
> + help
> + List all images found in flash
> +
> +config CMD_XIMG
> + bool "imxtract"
> + default y
> + help
> + Extract a part of a multi-image.
> +
> +config CMD_POWEROFF
> + bool
> +
> +endmenu
> +
> +menu "Environment commands"
> +
> +config CMD_EXPORTENV
> + bool "env export"
> + default y
> + help
> + Export environments.
> +
> +config CMD_IMPORTENV
> + bool "env import"
> + default y
> + help
> + Import environments.
> +
> +config CMD_EDITENV
> + bool "editenv"
> + default y
> + help
> + Edit environment variable.
> +
> +config CMD_SAVEENV
> + bool "saveenv"
> + default y
> + help
> + Save all environment variables into the compiled-in persistent
> + storage.
> +
> +config CMD_ENV_EXISTS
> + bool "env exists"
> + default y
> + help
> + Check if a variable is defined in the environment for use in
> + shell scripting.
> +
> +endmenu
> +
> +menu "Memory commands"
> +
> +config CMD_MEMORY
> + bool "md, mm, nm, mw, cp, cmp, base, loop"
> + default y
> + help
> + Memeory commands.
> + md - memory display
> + mm - memory modify (auto-incrementing address)
> + nm - memory modify (constant address)
> + mw - memory write (fill)
> + cp - memory copy
> + cmp - memory compare
> + base - print or set address offset
> + loop - initinite loop on address range
> +
> +config CMD_CRC32
> + bool "crc32"
> + default y
> + help
> + Compute CRC32.
> +
> +config LOOPW
> + bool "loopw"
> + help
> + Infinite write loop on address range
> +
> +config CMD_MEMTEST
> + bool "memtest"
> + help
> + Simple RAM read/write test.
> +
> +config CMD_MX_CYCLIC
> + bool "mdc, mwc"
> + help
> + mdc - memory display cyclic
> + mwc - memory write cyclic
> +
> +config CMD_MEMINFO
> + bool "meminfo"
> + help
> + Display memory information.
> +
> +endmenu
> +
> +menu "Device access commands"
> +
> +config CMD_DM
> + bool "dm - Access to driver model information"
> + depends on DM
> + default y
> + help
> + Provides access to driver model data structures and information,
> + such as a list of devices, list of uclasses and the state of each
> + device (e.g. activated). This is not required for operation, but
> + can be useful to see the state of driver model for debugging or
> + interest.
> +
> +config CMD_DEMO
> + bool "demo - Demonstration commands for driver model"
> + depends on DM
> + help
> + Provides a 'demo' command which can be used to play around with
> + driver model. To use this properly you will need to enable one or
> + both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
> + Otherwise you will always get an empty list of devices. The demo
> + devices are defined in the sandbox device tree, so the easiest
> + option is to use sandbox and pass the -d point to sandbox's
> + u-boot.dtb file.
> +
> +config CMD_LOADB
> + bool "loadb"
> + default y
> + help
> + Load a binary file over serial line.
> +
> +config CMD_LOADS
> + bool "loads"
> + default y
> + help
> + Load an S-Record file over serial line
> +
> +config CMD_FLASH
> + bool "flinfo, erase, protect"
> + default y
> + help
> + NOR flash support.
> + flinfo - print FLASH memory information
> + erase - FLASH memory
> + protect - enable or disable FLASH write protection
> +
> +config CMD_ARMFLASH
> + depends on FLASH_CFI_DRIVER
> + bool "armflash"
> + help
> + ARM Ltd reference designs flash partition access
> +
> +config CMD_NAND
> + bool "nand"
> + help
> + NAND support.
> +
> +config CMD_SF
> + bool "sf"
> + help
> + SPI Flash support
> +
> +config CMD_SPI
> + bool "sspi"
> + help
> + SPI utility command.
> +
> +config CMD_I2C
> + bool "i2c"
> + help
> + I2C support.
> +
> +config CMD_USB
> + bool "usb"
> + help
> + USB support.
> +
> +config CMD_FPGA
> + bool "fpga"
> + default y
> + help
> + FPGA support.
> +
> +config CMD_REMOTEPROC
> + bool "remoteproc"
> + depends on REMOTEPROC
> + help
> + Support for Remote Processor control
> +
> +config CMD_GPIO
> + bool "gpio"
> + help
> + GPIO support.
> +
> +endmenu
> +
> +
> +menu "Shell scripting commands"
> +
> +config CMD_ECHO
> + bool "echo"
> + default y
> + help
> + Echo args to console
> +
> +config CMD_ITEST
> + bool "itest"
> + default y
> + help
> + Return true/false on integer compare.
> +
> +config CMD_SOURCE
> + bool "source"
> + default y
> + help
> + Run script from memory
> +
> +config CMD_SETEXPR
> + bool "setexpr"
> + default y
> + help
> + Evaluate boolean and math expressions and store the result in an env
> + variable.
> + Also supports loading the value at a memory location into a variable.
> + If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
> +
> +endmenu
> +
> +menu "Network commands"
> +
> +config CMD_NET
> + bool "bootp, tftpboot"
> + select NET
> + default y
> + help
> + Network commands.
> + bootp - boot image via network using BOOTP/TFTP protocol
> + tftpboot - boot image via network using TFTP protocol
> +
> +config CMD_TFTPPUT
> + bool "tftp put"
> + help
> + TFTP put command, for uploading files to a server
> +
> +config CMD_TFTPSRV
> + bool "tftpsrv"
> + help
> + Act as a TFTP server and boot the first received file
> +
> +config CMD_RARP
> + bool "rarpboot"
> + help
> + Boot image via network using RARP/TFTP protocol
> +
> +config CMD_DHCP
> + bool "dhcp"
> + help
> + Boot image via network using DHCP/TFTP protocol
> +
> +config CMD_NFS
> + bool "nfs"
> + default y
> + help
> + Boot image via network using NFS protocol.
> +
> +config CMD_PING
> + bool "ping"
> + help
> + Send ICMP ECHO_REQUEST to network host
> +
> +config CMD_CDP
> + bool "cdp"
> + help
> + Perform CDP network configuration
> +
> +config CMD_SNTP
> + bool "sntp"
> + help
> + Synchronize RTC via network
> +
> +config CMD_DNS
> + bool "dns"
> + help
> + Lookup the IP of a hostname
> +
> +config CMD_LINK_LOCAL
> + bool "linklocal"
> + help
> + Acquire a network IP address using the link-local protocol
> +
> +endmenu
> +
> +menu "Misc commands"
> +
> +config CMD_AMBAPP
> + bool "ambapp"
> + depends on LEON3
> + default y
> + help
> + Lists AMBA Plug-n-Play information.
> +
> +config SYS_AMBAPP_PRINT_ON_STARTUP
> + bool "Show AMBA PnP info on startup"
> + depends on CMD_AMBAPP
> + default n
> + help
> + Show AMBA Plug-n-Play information on startup.
> +
> +config CMD_TIME
> + bool "time"
> + help
> + Run commands and summarize execution time.
> +
> +# TODO: rename to CMD_SLEEP
> +config CMD_MISC
> + bool "sleep"
> + default y
> + help
> + Delay execution for some time
> +
> +config CMD_TIMER
> + bool "timer"
> + help
> + Access the system timer.
> +
> +config CMD_SETGETDCR
> + bool "getdcr, setdcr, getidcr, setidcr"
> + depends on 4xx
> + default y
> + help
> + getdcr - Get an AMCC PPC 4xx DCR's value
> + setdcr - Set an AMCC PPC 4xx DCR's value
> + getidcr - Get a register value via indirect DCR addressing
> + setidcr - Set a register value via indirect DCR addressing
> +
> +config CMD_SOUND
> + bool "sound"
> + depends on SOUND
> + help
> + This provides basic access to the U-Boot's sound support. The main
> + feature is to play a beep.
> +
> + sound init - set up sound system
> + sound play - play a sound
> +
> +endmenu
> +
> +config CMD_BOOTSTAGE
> + bool "Enable the 'bootstage' command"
> + depends on BOOTSTAGE
> + help
> + Add a 'bootstage' command which supports printing a report
> + and un/stashing of bootstage data.
> +
> +menu "Power commands"
> +config CMD_PMIC
> + bool "Enable Driver Model PMIC command"
> + depends on DM_PMIC
> + help
> + This is the pmic command, based on a driver model pmic's API.
> + Command features are unchanged:
> + - list - list pmic devices
> + - pmic dev <id> - show or [set] operating pmic device (NEW)
> + - pmic dump - dump registers
> + - pmic read address - read byte of register at address
> + - pmic write address - write byte to register at address
> + The only one change for this command is 'dev' subcommand.
> +
> +config CMD_REGULATOR
> + bool "Enable Driver Model REGULATOR command"
> + depends on DM_REGULATOR
> + help
> + This command is based on driver model regulator's API.
> + User interface features:
> + - list - list regulator devices
> + - regulator dev <id> - show or [set] operating regulator device
> + - regulator info - print constraints info
> + - regulator status - print operating status
> + - regulator value <val] <-f> - print/[set] voltage value [uV]
> + - regulator current <val> - print/[set] current value [uA]
> + - regulator mode <id> - print/[set] operating mode id
> + - regulator enable - enable the regulator output
> + - regulator disable - disable the regulator output
> +
> + The '-f' (force) option can be used for set the value which exceeds
> + the limits, which are found in device-tree and are kept in regulator's
> + uclass platdata structure.
> +
> +endmenu
> +
> +menu "Security commands"
> +config CMD_TPM
> + bool "Enable the 'tpm' command"
> + depends on TPM
> + help
> + This provides a means to talk to a TPM from the command line. A wide
> + range of commands if provided - see 'tpm help' for details. The
> + command requires a suitable TPM on your board and the correct driver
> + must be enabled.
> +
> +config CMD_TPM_TEST
> + bool "Enable the 'tpm test' command"
> + depends on CMD_TPM
> + help
> + This provides a a series of tests to confirm that the TPM is working
> + correctly. The tests cover initialisation, non-volatile RAM, extend,
> + global lock and checking that timing is within expectations. The
> + tests pass correctly on Infineon TPMs but may need to be adjusted
> + for other devices.
> +
> +endmenu
> +
> +endmenu
> diff --git a/cmd/Makefile b/cmd/Makefile
> new file mode 100644
> index 0000000..880a886
> --- /dev/null
> +++ b/cmd/Makefile
> @@ -0,0 +1,166 @@
> +#
> +# (C) Copyright 2004-2006
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +ifndef CONFIG_SPL_BUILD
> +# core command
> +obj-y += cmd_boot.o
> +obj-$(CONFIG_CMD_BOOTM) += cmd_bootm.o
> +obj-y += cmd_help.o
> +obj-y += cmd_version.o
> +
> +# command
> +obj-$(CONFIG_CMD_AES) += cmd_aes.o
> +obj-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
> +obj-$(CONFIG_CMD_ARMFLASH) += cmd_armflash.o
> +obj-$(CONFIG_SOURCE) += cmd_source.o
> +obj-$(CONFIG_CMD_SOURCE) += cmd_source.o
> +obj-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
> +obj-$(CONFIG_CMD_BEDBUG) += cmd_bedbug.o
> +obj-$(CONFIG_CMD_BMP) += cmd_bmp.o
> +obj-$(CONFIG_CMD_BOOTMENU) += cmd_bootmenu.o
> +obj-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o
> +obj-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o
> +obj-$(CONFIG_CMD_CACHE) += cmd_cache.o
> +obj-$(CONFIG_CMD_CBFS) += cmd_cbfs.o
> +obj-$(CONFIG_CMD_CLK) += cmd_clk.o
> +obj-$(CONFIG_CMD_CONSOLE) += cmd_console.o
> +obj-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o
> +obj-$(CONFIG_CMD_CPU) += cmd_cpu.o
> +obj-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o
> +obj-$(CONFIG_CMD_DATE) += cmd_date.o
> +obj-$(CONFIG_CMD_DEMO) += cmd_demo.o
> +obj-$(CONFIG_CMD_SOUND) += cmd_sound.o
> +ifdef CONFIG_4xx
> +obj-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o
> +endif
> +ifdef CONFIG_POST
> +obj-$(CONFIG_CMD_DIAG) += cmd_diag.o
> +endif
> +obj-$(CONFIG_CMD_DISPLAY) += cmd_display.o
> +obj-$(CONFIG_CMD_DTT) += cmd_dtt.o
> +obj-$(CONFIG_CMD_ECHO) += cmd_echo.o
> +obj-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o
> +obj-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
> +obj-$(CONFIG_EFI_STUB) += cmd_efi.o
> +obj-$(CONFIG_CMD_ELF) += cmd_elf.o
> +obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o
> +obj-$(CONFIG_CMD_EXT4) += cmd_ext4.o
> +obj-$(CONFIG_CMD_EXT2) += cmd_ext2.o
> +obj-$(CONFIG_CMD_FAT) += cmd_fat.o
> +obj-$(CONFIG_CMD_FDC) += cmd_fdc.o
> +obj-$(CONFIG_OF_LIBFDT) += cmd_fdt.o
> +obj-$(CONFIG_CMD_FITUPD) += cmd_fitupd.o
> +obj-$(CONFIG_CMD_FLASH) += cmd_flash.o
> +ifdef CONFIG_FPGA
> +obj-$(CONFIG_CMD_FPGA) += cmd_fpga.o
> +endif
> +obj-$(CONFIG_CMD_FPGAD) += cmd_fpgad.o
> +obj-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o
> +obj-$(CONFIG_CMD_FUSE) += cmd_fuse.o
> +obj-$(CONFIG_CMD_GETTIME) += cmd_gettime.o
> +obj-$(CONFIG_CMD_GPIO) += cmd_gpio.o
> +obj-$(CONFIG_CMD_I2C) += cmd_i2c.o
> +obj-$(CONFIG_CMD_IOTRACE) += cmd_iotrace.o
> +obj-$(CONFIG_CMD_HASH) += cmd_hash.o
> +obj-$(CONFIG_CMD_IDE) += cmd_ide.o
> +obj-$(CONFIG_CMD_IMMAP) += cmd_immap.o
> +obj-$(CONFIG_CMD_INI) += cmd_ini.o
> +obj-$(CONFIG_CMD_IRQ) += cmd_irq.o
> +obj-$(CONFIG_CMD_ITEST) += cmd_itest.o
> +obj-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
> +obj-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o
> +obj-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o
> +obj-$(CONFIG_CMD_LED) += cmd_led.o
> +obj-$(CONFIG_CMD_LICENSE) += cmd_license.o
> +obj-y += cmd_load.o
> +obj-$(CONFIG_LOGBUFFER) += cmd_log.o
> +obj-$(CONFIG_ID_EEPROM) += cmd_mac.o
> +obj-$(CONFIG_CMD_MD5SUM) += cmd_md5sum.o
> +obj-$(CONFIG_CMD_MEMORY) += cmd_mem.o
> +obj-$(CONFIG_CMD_IO) += cmd_io.o
> +obj-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
> +obj-$(CONFIG_CMD_MII) += cmd_mii.o
> +ifdef CONFIG_PHYLIB
> +obj-$(CONFIG_CMD_MII) += cmd_mdio.o
> +endif
> +obj-$(CONFIG_CMD_MISC) += cmd_misc.o
> +obj-$(CONFIG_CMD_MMC) += cmd_mmc.o
> +obj-$(CONFIG_CMD_MMC_SPI) += cmd_mmc_spi.o
> +obj-$(CONFIG_MP) += cmd_mp.o
> +obj-$(CONFIG_CMD_MTDPARTS) += cmd_mtdparts.o
> +obj-$(CONFIG_CMD_NAND) += cmd_nand.o
> +obj-$(CONFIG_CMD_NET) += cmd_net.o
> +obj-$(CONFIG_CMD_ONENAND) += cmd_onenand.o
> +obj-$(CONFIG_CMD_OTP) += cmd_otp.o
> +obj-$(CONFIG_CMD_PART) += cmd_part.o
> +ifdef CONFIG_PCI
> +obj-$(CONFIG_CMD_PCI) += cmd_pci.o
> +endif
> +obj-y += cmd_pcmcia.o
> +obj-$(CONFIG_CMD_PORTIO) += cmd_portio.o
> +obj-$(CONFIG_CMD_PXE) += cmd_pxe.o
> +obj-$(CONFIG_CMD_READ) += cmd_read.o
> +obj-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o
> +obj-$(CONFIG_CMD_REISER) += cmd_reiser.o
> +obj-$(CONFIG_CMD_REMOTEPROC) += cmd_remoteproc.o
> +obj-$(CONFIG_SANDBOX) += cmd_host.o
> +obj-$(CONFIG_CMD_SATA) += cmd_sata.o
> +obj-$(CONFIG_CMD_SF) += cmd_sf.o
> +obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o
> +obj-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o
> +obj-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o
> +obj-$(CONFIG_CMD_SOFTSWITCH) += cmd_softswitch.o
> +obj-$(CONFIG_CMD_SPI) += cmd_spi.o
> +obj-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o
> +obj-$(CONFIG_CMD_STRINGS) += cmd_strings.o
> +obj-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o
> +obj-$(CONFIG_CMD_TIME) += cmd_time.o
> +obj-$(CONFIG_CMD_TRACE) += cmd_trace.o
> +obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_test.o
> +obj-$(CONFIG_CMD_TPM) += cmd_tpm.o
> +obj-$(CONFIG_CMD_TPM_TEST) += cmd_tpm_test.o
> +obj-$(CONFIG_CMD_TSI148) += cmd_tsi148.o
> +obj-$(CONFIG_CMD_UBI) += cmd_ubi.o
> +obj-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o
> +obj-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
> +obj-$(CONFIG_CMD_UNZIP) += cmd_unzip.o
> +ifdef CONFIG_LZMA
> +obj-$(CONFIG_CMD_LZMADEC) += cmd_lzmadec.o
> +endif
> +
> +obj-$(CONFIG_CMD_USB) += cmd_usb.o
> +obj-$(CONFIG_CMD_FASTBOOT) += cmd_fastboot.o
> +obj-$(CONFIG_CMD_FS_UUID) += cmd_fs_uuid.o
> +
> +obj-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o
> +obj-$(CONFIG_CMD_THOR_DOWNLOAD) += cmd_thordown.o
> +obj-$(CONFIG_CMD_XIMG) += cmd_ximg.o
> +obj-$(CONFIG_YAFFS2) += cmd_yaffs2.o
> +obj-$(CONFIG_CMD_SPL) += cmd_spl.o
> +obj-$(CONFIG_CMD_ZIP) += cmd_zip.o
> +obj-$(CONFIG_CMD_ZFS) += cmd_zfs.o
> +
> +obj-$(CONFIG_CMD_DFU) += cmd_dfu.o
> +obj-$(CONFIG_CMD_GPT) += cmd_gpt.o
> +obj-$(CONFIG_CMD_ETHSW) += cmd_ethsw.o
> +
> +# Power
> +obj-$(CONFIG_CMD_PMIC) += cmd_pmic.o
> +obj-$(CONFIG_CMD_REGULATOR) += cmd_regulator.o
> +endif # !CONFIG_SPL_BUILD
> +
> +ifdef CONFIG_SPL_BUILD
> +ifdef CONFIG_SPL_SATA_SUPPORT
> +obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o
> +endif
> +endif # CONFIG_SPL_BUILD
> +
> +obj-$(CONFIG_CMD_BLOB) += cmd_blob.o
> +
> +# core command
> +obj-y += cmd_nvedit.o
> +obj-y += cmd_disk.o
> diff --git a/common/cmd_aes.c b/cmd/cmd_aes.c
> similarity index 100%
> rename from common/cmd_aes.c
> rename to cmd/cmd_aes.c
> diff --git a/common/cmd_ambapp.c b/cmd/cmd_ambapp.c
> similarity index 100%
> rename from common/cmd_ambapp.c
> rename to cmd/cmd_ambapp.c
> diff --git a/common/cmd_armflash.c b/cmd/cmd_armflash.c
> similarity index 100%
> rename from common/cmd_armflash.c
> rename to cmd/cmd_armflash.c
> diff --git a/common/cmd_bdinfo.c b/cmd/cmd_bdinfo.c
> similarity index 100%
> rename from common/cmd_bdinfo.c
> rename to cmd/cmd_bdinfo.c
> diff --git a/common/cmd_bedbug.c b/cmd/cmd_bedbug.c
> similarity index 100%
> rename from common/cmd_bedbug.c
> rename to cmd/cmd_bedbug.c
> diff --git a/common/cmd_blob.c b/cmd/cmd_blob.c
> similarity index 100%
> rename from common/cmd_blob.c
> rename to cmd/cmd_blob.c
> diff --git a/common/cmd_bmp.c b/cmd/cmd_bmp.c
> similarity index 100%
> rename from common/cmd_bmp.c
> rename to cmd/cmd_bmp.c
> diff --git a/common/cmd_boot.c b/cmd/cmd_boot.c
> similarity index 100%
> rename from common/cmd_boot.c
> rename to cmd/cmd_boot.c
> diff --git a/common/cmd_bootldr.c b/cmd/cmd_bootldr.c
> similarity index 100%
> rename from common/cmd_bootldr.c
> rename to cmd/cmd_bootldr.c
> diff --git a/common/cmd_bootm.c b/cmd/cmd_bootm.c
> similarity index 100%
> rename from common/cmd_bootm.c
> rename to cmd/cmd_bootm.c
> diff --git a/common/cmd_bootmenu.c b/cmd/cmd_bootmenu.c
> similarity index 100%
> rename from common/cmd_bootmenu.c
> rename to cmd/cmd_bootmenu.c
> diff --git a/common/cmd_bootstage.c b/cmd/cmd_bootstage.c
> similarity index 100%
> rename from common/cmd_bootstage.c
> rename to cmd/cmd_bootstage.c
> diff --git a/common/cmd_cache.c b/cmd/cmd_cache.c
> similarity index 100%
> rename from common/cmd_cache.c
> rename to cmd/cmd_cache.c
> diff --git a/common/cmd_cbfs.c b/cmd/cmd_cbfs.c
> similarity index 100%
> rename from common/cmd_cbfs.c
> rename to cmd/cmd_cbfs.c
> diff --git a/common/cmd_clk.c b/cmd/cmd_clk.c
> similarity index 100%
> rename from common/cmd_clk.c
> rename to cmd/cmd_clk.c
> diff --git a/common/cmd_console.c b/cmd/cmd_console.c
> similarity index 100%
> rename from common/cmd_console.c
> rename to cmd/cmd_console.c
> diff --git a/common/cmd_cplbinfo.c b/cmd/cmd_cplbinfo.c
> similarity index 100%
> rename from common/cmd_cplbinfo.c
> rename to cmd/cmd_cplbinfo.c
> diff --git a/common/cmd_cpu.c b/cmd/cmd_cpu.c
> similarity index 100%
> rename from common/cmd_cpu.c
> rename to cmd/cmd_cpu.c
> diff --git a/common/cmd_cramfs.c b/cmd/cmd_cramfs.c
> similarity index 100%
> rename from common/cmd_cramfs.c
> rename to cmd/cmd_cramfs.c
> diff --git a/common/cmd_dataflash_mmc_mux.c b/cmd/cmd_dataflash_mmc_mux.c
> similarity index 100%
> rename from common/cmd_dataflash_mmc_mux.c
> rename to cmd/cmd_dataflash_mmc_mux.c
> diff --git a/common/cmd_date.c b/cmd/cmd_date.c
> similarity index 100%
> rename from common/cmd_date.c
> rename to cmd/cmd_date.c
> diff --git a/common/cmd_dcr.c b/cmd/cmd_dcr.c
> similarity index 100%
> rename from common/cmd_dcr.c
> rename to cmd/cmd_dcr.c
> diff --git a/common/cmd_demo.c b/cmd/cmd_demo.c
> similarity index 100%
> rename from common/cmd_demo.c
> rename to cmd/cmd_demo.c
> diff --git a/common/cmd_dfu.c b/cmd/cmd_dfu.c
> similarity index 100%
> rename from common/cmd_dfu.c
> rename to cmd/cmd_dfu.c
> diff --git a/common/cmd_diag.c b/cmd/cmd_diag.c
> similarity index 100%
> rename from common/cmd_diag.c
> rename to cmd/cmd_diag.c
> diff --git a/common/cmd_disk.c b/cmd/cmd_disk.c
> similarity index 100%
> rename from common/cmd_disk.c
> rename to cmd/cmd_disk.c
> diff --git a/common/cmd_display.c b/cmd/cmd_display.c
> similarity index 100%
> rename from common/cmd_display.c
> rename to cmd/cmd_display.c
> diff --git a/common/cmd_dtt.c b/cmd/cmd_dtt.c
> similarity index 100%
> rename from common/cmd_dtt.c
> rename to cmd/cmd_dtt.c
> diff --git a/common/cmd_echo.c b/cmd/cmd_echo.c
> similarity index 100%
> rename from common/cmd_echo.c
> rename to cmd/cmd_echo.c
> diff --git a/common/cmd_eeprom.c b/cmd/cmd_eeprom.c
> similarity index 100%
> rename from common/cmd_eeprom.c
> rename to cmd/cmd_eeprom.c
> diff --git a/common/cmd_efi.c b/cmd/cmd_efi.c
> similarity index 100%
> rename from common/cmd_efi.c
> rename to cmd/cmd_efi.c
> diff --git a/common/cmd_elf.c b/cmd/cmd_elf.c
> similarity index 100%
> rename from common/cmd_elf.c
> rename to cmd/cmd_elf.c
> diff --git a/common/cmd_ethsw.c b/cmd/cmd_ethsw.c
> similarity index 100%
> rename from common/cmd_ethsw.c
> rename to cmd/cmd_ethsw.c
> diff --git a/common/cmd_exit.c b/cmd/cmd_exit.c
> similarity index 100%
> rename from common/cmd_exit.c
> rename to cmd/cmd_exit.c
> diff --git a/common/cmd_ext2.c b/cmd/cmd_ext2.c
> similarity index 100%
> rename from common/cmd_ext2.c
> rename to cmd/cmd_ext2.c
> diff --git a/common/cmd_ext4.c b/cmd/cmd_ext4.c
> similarity index 100%
> rename from common/cmd_ext4.c
> rename to cmd/cmd_ext4.c
> diff --git a/common/cmd_fastboot.c b/cmd/cmd_fastboot.c
> similarity index 100%
> rename from common/cmd_fastboot.c
> rename to cmd/cmd_fastboot.c
> diff --git a/common/cmd_fat.c b/cmd/cmd_fat.c
> similarity index 100%
> rename from common/cmd_fat.c
> rename to cmd/cmd_fat.c
> diff --git a/common/cmd_fdc.c b/cmd/cmd_fdc.c
> similarity index 100%
> rename from common/cmd_fdc.c
> rename to cmd/cmd_fdc.c
> diff --git a/common/cmd_fdt.c b/cmd/cmd_fdt.c
> similarity index 100%
> rename from common/cmd_fdt.c
> rename to cmd/cmd_fdt.c
> diff --git a/common/cmd_fitupd.c b/cmd/cmd_fitupd.c
> similarity index 100%
> rename from common/cmd_fitupd.c
> rename to cmd/cmd_fitupd.c
> diff --git a/common/cmd_flash.c b/cmd/cmd_flash.c
> similarity index 100%
> rename from common/cmd_flash.c
> rename to cmd/cmd_flash.c
> diff --git a/common/cmd_fpga.c b/cmd/cmd_fpga.c
> similarity index 100%
> rename from common/cmd_fpga.c
> rename to cmd/cmd_fpga.c
> diff --git a/common/cmd_fpgad.c b/cmd/cmd_fpgad.c
> similarity index 100%
> rename from common/cmd_fpgad.c
> rename to cmd/cmd_fpgad.c
> diff --git a/common/cmd_fs.c b/cmd/cmd_fs.c
> similarity index 100%
> rename from common/cmd_fs.c
> rename to cmd/cmd_fs.c
> diff --git a/common/cmd_fs_uuid.c b/cmd/cmd_fs_uuid.c
> similarity index 100%
> rename from common/cmd_fs_uuid.c
> rename to cmd/cmd_fs_uuid.c
> diff --git a/common/cmd_fuse.c b/cmd/cmd_fuse.c
> similarity index 100%
> rename from common/cmd_fuse.c
> rename to cmd/cmd_fuse.c
> diff --git a/common/cmd_gettime.c b/cmd/cmd_gettime.c
> similarity index 100%
> rename from common/cmd_gettime.c
> rename to cmd/cmd_gettime.c
> diff --git a/common/cmd_gpio.c b/cmd/cmd_gpio.c
> similarity index 100%
> rename from common/cmd_gpio.c
> rename to cmd/cmd_gpio.c
> diff --git a/common/cmd_gpt.c b/cmd/cmd_gpt.c
> similarity index 100%
> rename from common/cmd_gpt.c
> rename to cmd/cmd_gpt.c
> diff --git a/common/cmd_hash.c b/cmd/cmd_hash.c
> similarity index 100%
> rename from common/cmd_hash.c
> rename to cmd/cmd_hash.c
> diff --git a/common/cmd_help.c b/cmd/cmd_help.c
> similarity index 100%
> rename from common/cmd_help.c
> rename to cmd/cmd_help.c
> diff --git a/common/cmd_host.c b/cmd/cmd_host.c
> similarity index 100%
> rename from common/cmd_host.c
> rename to cmd/cmd_host.c
> diff --git a/common/cmd_i2c.c b/cmd/cmd_i2c.c
> similarity index 100%
> rename from common/cmd_i2c.c
> rename to cmd/cmd_i2c.c
> diff --git a/common/cmd_ide.c b/cmd/cmd_ide.c
> similarity index 100%
> rename from common/cmd_ide.c
> rename to cmd/cmd_ide.c
> diff --git a/common/cmd_immap.c b/cmd/cmd_immap.c
> similarity index 100%
> rename from common/cmd_immap.c
> rename to cmd/cmd_immap.c
> diff --git a/common/cmd_ini.c b/cmd/cmd_ini.c
> similarity index 100%
> rename from common/cmd_ini.c
> rename to cmd/cmd_ini.c
> diff --git a/common/cmd_io.c b/cmd/cmd_io.c
> similarity index 100%
> rename from common/cmd_io.c
> rename to cmd/cmd_io.c
> diff --git a/common/cmd_iotrace.c b/cmd/cmd_iotrace.c
> similarity index 100%
> rename from common/cmd_iotrace.c
> rename to cmd/cmd_iotrace.c
> diff --git a/common/cmd_irq.c b/cmd/cmd_irq.c
> similarity index 100%
> rename from common/cmd_irq.c
> rename to cmd/cmd_irq.c
> diff --git a/common/cmd_itest.c b/cmd/cmd_itest.c
> similarity index 100%
> rename from common/cmd_itest.c
> rename to cmd/cmd_itest.c
> diff --git a/common/cmd_jffs2.c b/cmd/cmd_jffs2.c
> similarity index 100%
> rename from common/cmd_jffs2.c
> rename to cmd/cmd_jffs2.c
> diff --git a/common/cmd_ldrinfo.c b/cmd/cmd_ldrinfo.c
> similarity index 100%
> rename from common/cmd_ldrinfo.c
> rename to cmd/cmd_ldrinfo.c
> diff --git a/common/cmd_led.c b/cmd/cmd_led.c
> similarity index 100%
> rename from common/cmd_led.c
> rename to cmd/cmd_led.c
> diff --git a/common/cmd_license.c b/cmd/cmd_license.c
> similarity index 100%
> rename from common/cmd_license.c
> rename to cmd/cmd_license.c
> diff --git a/common/cmd_load.c b/cmd/cmd_load.c
> similarity index 100%
> rename from common/cmd_load.c
> rename to cmd/cmd_load.c
> diff --git a/common/cmd_log.c b/cmd/cmd_log.c
> similarity index 100%
> rename from common/cmd_log.c
> rename to cmd/cmd_log.c
> diff --git a/common/cmd_lzmadec.c b/cmd/cmd_lzmadec.c
> similarity index 100%
> rename from common/cmd_lzmadec.c
> rename to cmd/cmd_lzmadec.c
> diff --git a/common/cmd_mac.c b/cmd/cmd_mac.c
> similarity index 100%
> rename from common/cmd_mac.c
> rename to cmd/cmd_mac.c
> diff --git a/common/cmd_md5sum.c b/cmd/cmd_md5sum.c
> similarity index 100%
> rename from common/cmd_md5sum.c
> rename to cmd/cmd_md5sum.c
> diff --git a/common/cmd_mdio.c b/cmd/cmd_mdio.c
> similarity index 100%
> rename from common/cmd_mdio.c
> rename to cmd/cmd_mdio.c
> diff --git a/common/cmd_mem.c b/cmd/cmd_mem.c
> similarity index 100%
> rename from common/cmd_mem.c
> rename to cmd/cmd_mem.c
> diff --git a/common/cmd_mfsl.c b/cmd/cmd_mfsl.c
> similarity index 100%
> rename from common/cmd_mfsl.c
> rename to cmd/cmd_mfsl.c
> diff --git a/common/cmd_mii.c b/cmd/cmd_mii.c
> similarity index 100%
> rename from common/cmd_mii.c
> rename to cmd/cmd_mii.c
> diff --git a/common/cmd_misc.c b/cmd/cmd_misc.c
> similarity index 100%
> rename from common/cmd_misc.c
> rename to cmd/cmd_misc.c
> diff --git a/common/cmd_mmc.c b/cmd/cmd_mmc.c
> similarity index 100%
> rename from common/cmd_mmc.c
> rename to cmd/cmd_mmc.c
> diff --git a/common/cmd_mmc_spi.c b/cmd/cmd_mmc_spi.c
> similarity index 100%
> rename from common/cmd_mmc_spi.c
> rename to cmd/cmd_mmc_spi.c
> diff --git a/common/cmd_mp.c b/cmd/cmd_mp.c
> similarity index 100%
> rename from common/cmd_mp.c
> rename to cmd/cmd_mp.c
> diff --git a/common/cmd_mtdparts.c b/cmd/cmd_mtdparts.c
> similarity index 100%
> rename from common/cmd_mtdparts.c
> rename to cmd/cmd_mtdparts.c
> diff --git a/common/cmd_nand.c b/cmd/cmd_nand.c
> similarity index 100%
> rename from common/cmd_nand.c
> rename to cmd/cmd_nand.c
> diff --git a/common/cmd_net.c b/cmd/cmd_net.c
> similarity index 100%
> rename from common/cmd_net.c
> rename to cmd/cmd_net.c
> diff --git a/common/cmd_nvedit.c b/cmd/cmd_nvedit.c
> similarity index 100%
> rename from common/cmd_nvedit.c
> rename to cmd/cmd_nvedit.c
> diff --git a/common/cmd_onenand.c b/cmd/cmd_onenand.c
> similarity index 100%
> rename from common/cmd_onenand.c
> rename to cmd/cmd_onenand.c
> diff --git a/common/cmd_otp.c b/cmd/cmd_otp.c
> similarity index 100%
> rename from common/cmd_otp.c
> rename to cmd/cmd_otp.c
> diff --git a/common/cmd_part.c b/cmd/cmd_part.c
> similarity index 100%
> rename from common/cmd_part.c
> rename to cmd/cmd_part.c
> diff --git a/common/cmd_pci.c b/cmd/cmd_pci.c
> similarity index 100%
> rename from common/cmd_pci.c
> rename to cmd/cmd_pci.c
> diff --git a/common/cmd_pcmcia.c b/cmd/cmd_pcmcia.c
> similarity index 100%
> rename from common/cmd_pcmcia.c
> rename to cmd/cmd_pcmcia.c
> diff --git a/common/cmd_pmic.c b/cmd/cmd_pmic.c
> similarity index 100%
> rename from common/cmd_pmic.c
> rename to cmd/cmd_pmic.c
> diff --git a/common/cmd_portio.c b/cmd/cmd_portio.c
> similarity index 100%
> rename from common/cmd_portio.c
> rename to cmd/cmd_portio.c
> diff --git a/common/cmd_pxe.c b/cmd/cmd_pxe.c
> similarity index 100%
> rename from common/cmd_pxe.c
> rename to cmd/cmd_pxe.c
> diff --git a/common/cmd_read.c b/cmd/cmd_read.c
> similarity index 100%
> rename from common/cmd_read.c
> rename to cmd/cmd_read.c
> diff --git a/common/cmd_reginfo.c b/cmd/cmd_reginfo.c
> similarity index 100%
> rename from common/cmd_reginfo.c
> rename to cmd/cmd_reginfo.c
> diff --git a/common/cmd_regulator.c b/cmd/cmd_regulator.c
> similarity index 100%
> rename from common/cmd_regulator.c
> rename to cmd/cmd_regulator.c
> diff --git a/common/cmd_reiser.c b/cmd/cmd_reiser.c
> similarity index 100%
> rename from common/cmd_reiser.c
> rename to cmd/cmd_reiser.c
> diff --git a/common/cmd_remoteproc.c b/cmd/cmd_remoteproc.c
> similarity index 100%
> rename from common/cmd_remoteproc.c
> rename to cmd/cmd_remoteproc.c
> diff --git a/common/cmd_sata.c b/cmd/cmd_sata.c
> similarity index 100%
> rename from common/cmd_sata.c
> rename to cmd/cmd_sata.c
> diff --git a/common/cmd_scsi.c b/cmd/cmd_scsi.c
> similarity index 100%
> rename from common/cmd_scsi.c
> rename to cmd/cmd_scsi.c
> diff --git a/common/cmd_setexpr.c b/cmd/cmd_setexpr.c
> similarity index 100%
> rename from common/cmd_setexpr.c
> rename to cmd/cmd_setexpr.c
> diff --git a/common/cmd_sf.c b/cmd/cmd_sf.c
> similarity index 100%
> rename from common/cmd_sf.c
> rename to cmd/cmd_sf.c
> diff --git a/common/cmd_sha1sum.c b/cmd/cmd_sha1sum.c
> similarity index 100%
> rename from common/cmd_sha1sum.c
> rename to cmd/cmd_sha1sum.c
> diff --git a/common/cmd_softswitch.c b/cmd/cmd_softswitch.c
> similarity index 100%
> rename from common/cmd_softswitch.c
> rename to cmd/cmd_softswitch.c
> diff --git a/common/cmd_sound.c b/cmd/cmd_sound.c
> similarity index 100%
> rename from common/cmd_sound.c
> rename to cmd/cmd_sound.c
> diff --git a/common/cmd_source.c b/cmd/cmd_source.c
> similarity index 100%
> rename from common/cmd_source.c
> rename to cmd/cmd_source.c
> diff --git a/common/cmd_spi.c b/cmd/cmd_spi.c
> similarity index 100%
> rename from common/cmd_spi.c
> rename to cmd/cmd_spi.c
> diff --git a/common/cmd_spibootldr.c b/cmd/cmd_spibootldr.c
> similarity index 100%
> rename from common/cmd_spibootldr.c
> rename to cmd/cmd_spibootldr.c
> diff --git a/common/cmd_spl.c b/cmd/cmd_spl.c
> similarity index 100%
> rename from common/cmd_spl.c
> rename to cmd/cmd_spl.c
> diff --git a/common/cmd_strings.c b/cmd/cmd_strings.c
> similarity index 100%
> rename from common/cmd_strings.c
> rename to cmd/cmd_strings.c
> diff --git a/common/cmd_terminal.c b/cmd/cmd_terminal.c
> similarity index 100%
> rename from common/cmd_terminal.c
> rename to cmd/cmd_terminal.c
> diff --git a/common/cmd_test.c b/cmd/cmd_test.c
> similarity index 100%
> rename from common/cmd_test.c
> rename to cmd/cmd_test.c
> diff --git a/common/cmd_thordown.c b/cmd/cmd_thordown.c
> similarity index 100%
> rename from common/cmd_thordown.c
> rename to cmd/cmd_thordown.c
> diff --git a/common/cmd_time.c b/cmd/cmd_time.c
> similarity index 100%
> rename from common/cmd_time.c
> rename to cmd/cmd_time.c
> diff --git a/common/cmd_tpm.c b/cmd/cmd_tpm.c
> similarity index 100%
> rename from common/cmd_tpm.c
> rename to cmd/cmd_tpm.c
> diff --git a/common/cmd_tpm_test.c b/cmd/cmd_tpm_test.c
> similarity index 100%
> rename from common/cmd_tpm_test.c
> rename to cmd/cmd_tpm_test.c
> diff --git a/common/cmd_trace.c b/cmd/cmd_trace.c
> similarity index 100%
> rename from common/cmd_trace.c
> rename to cmd/cmd_trace.c
> diff --git a/common/cmd_tsi148.c b/cmd/cmd_tsi148.c
> similarity index 100%
> rename from common/cmd_tsi148.c
> rename to cmd/cmd_tsi148.c
> diff --git a/common/cmd_ubi.c b/cmd/cmd_ubi.c
> similarity index 100%
> rename from common/cmd_ubi.c
> rename to cmd/cmd_ubi.c
> diff --git a/common/cmd_ubifs.c b/cmd/cmd_ubifs.c
> similarity index 100%
> rename from common/cmd_ubifs.c
> rename to cmd/cmd_ubifs.c
> diff --git a/common/cmd_universe.c b/cmd/cmd_universe.c
> similarity index 100%
> rename from common/cmd_universe.c
> rename to cmd/cmd_universe.c
> diff --git a/common/cmd_unzip.c b/cmd/cmd_unzip.c
> similarity index 100%
> rename from common/cmd_unzip.c
> rename to cmd/cmd_unzip.c
> diff --git a/common/cmd_usb.c b/cmd/cmd_usb.c
> similarity index 100%
> rename from common/cmd_usb.c
> rename to cmd/cmd_usb.c
> diff --git a/common/cmd_usb_mass_storage.c b/cmd/cmd_usb_mass_storage.c
> similarity index 100%
> rename from common/cmd_usb_mass_storage.c
> rename to cmd/cmd_usb_mass_storage.c
> diff --git a/common/cmd_version.c b/cmd/cmd_version.c
> similarity index 100%
> rename from common/cmd_version.c
> rename to cmd/cmd_version.c
> diff --git a/common/cmd_ximg.c b/cmd/cmd_ximg.c
> similarity index 100%
> rename from common/cmd_ximg.c
> rename to cmd/cmd_ximg.c
> diff --git a/common/cmd_yaffs2.c b/cmd/cmd_yaffs2.c
> similarity index 100%
> rename from common/cmd_yaffs2.c
> rename to cmd/cmd_yaffs2.c
> diff --git a/common/cmd_zfs.c b/cmd/cmd_zfs.c
> similarity index 100%
> rename from common/cmd_zfs.c
> rename to cmd/cmd_zfs.c
> diff --git a/common/cmd_zip.c b/cmd/cmd_zip.c
> similarity index 100%
> rename from common/cmd_zip.c
> rename to cmd/cmd_zip.c
> diff --git a/common/Kconfig b/common/Kconfig
> index 9d446bf..067545d 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -1,522 +1,3 @@
> -menu "Command line interface"
> -
> -config HUSH_PARSER
> - bool "Use hush shell"
> - select SYS_HUSH_PARSER
> - help
> - This option enables the "hush" shell (from Busybox) as command line
> - interpreter, thus enabling powerful command line syntax like
> - if...then...else...fi conditionals or `&&' and '||'
> - constructs ("shell scripts").
> -
> - If disabled, you get the old, much simpler behaviour with a somewhat
> - smaller memory footprint.
> -
> -config SYS_HUSH_PARSER
> - bool
> - help
> - Backward compatibility.
> -
> -config SYS_PROMPT
> - string "Shell prompt"
> - default "=> "
> - help
> - This string is displayed in the command line to the left of the
> - cursor.
> -
> -menu "Autoboot options"
> -
> -config AUTOBOOT_KEYED
> - bool "Stop autobooting via specific input key / string"
> - default n
> - help
> - This option enables stopping (aborting) of the automatic
> - boot feature only by issuing a specific input key or
> - string. If not enabled, any input key will abort the
> - U-Boot automatic booting process and bring the device
> - to the U-Boot prompt for user input.
> -
> -config AUTOBOOT_PROMPT
> - string "Autoboot stop prompt"
> - depends on AUTOBOOT_KEYED
> - default "Autoboot in %d seconds\\n"
> - help
> - This string is displayed before the boot delay selected by
> - CONFIG_BOOTDELAY starts. If it is not defined there is no
> - output indicating that autoboot is in progress.
> -
> - Note that this define is used as the (only) argument to a
> - printf() call, so it may contain '%' format specifications,
> - provided that it also includes, sepearated by commas exactly
> - like in a printf statement, the required arguments. It is
> - the responsibility of the user to select only such arguments
> - that are valid in the given context.
> -
> -config AUTOBOOT_ENCRYPTION
> - bool "Enable encryption in autoboot stopping"
> - depends on AUTOBOOT_KEYED
> - default n
> -
> -config AUTOBOOT_DELAY_STR
> - string "Delay autobooting via specific input key / string"
> - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
> - help
> - This option delays the automatic boot feature by issuing
> - a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
> - or the environment variable "bootdelaykey" is specified
> - and this string is received from console input before
> - autoboot starts booting, U-Boot gives a command prompt. The
> - U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
> - used, otherwise it never times out.
> -
> -config AUTOBOOT_STOP_STR
> - string "Stop autobooting via specific input key / string"
> - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
> - help
> - This option enables stopping (aborting) of the automatic
> - boot feature only by issuing a specific input key or
> - string. If CONFIG_AUTOBOOT_STOP_STR or the environment
> - variable "bootstopkey" is specified and this string is
> - received from console input before autoboot starts booting,
> - U-Boot gives a command prompt. The U-Boot prompt never
> - times out, even if CONFIG_BOOT_RETRY_TIME is used.
> -
> -config AUTOBOOT_KEYED_CTRLC
> - bool "Enable Ctrl-C autoboot interruption"
> - depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
> - default n
> - help
> - This option allows for the boot sequence to be interrupted
> - by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
> - Setting this variable provides an escape sequence from the
> - limited "password" strings.
> -
> -config AUTOBOOT_STOP_STR_SHA256
> - string "Stop autobooting via SHA256 encrypted password"
> - depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
> - help
> - This option adds the feature to only stop the autobooting,
> - and therefore boot into the U-Boot prompt, when the input
> - string / password matches a values that is encypted via
> - a SHA256 hash and saved in the environment.
> -
> -endmenu
> -
> -comment "Commands"
> -
> -menu "Info commands"
> -
> -config CMD_BDI
> - bool "bdinfo"
> - default y
> - help
> - Print board info
> -
> -config CMD_CONSOLE
> - bool "coninfo"
> - default y
> - help
> - Print console devices and information.
> -
> -config CMD_CPU
> - bool "cpu"
> - help
> - Print information about available CPUs. This normally shows the
> - number of CPUs, type (e.g. manufacturer, architecture, product or
> - internal name) and clock frequency. Other information may be
> - available depending on the CPU driver.
> -
> -config CMD_LICENSE
> - bool "license"
> - help
> - Print GPL license text
> -
> -endmenu
> -
> -menu "Boot commands"
> -
> -config CMD_BOOTD
> - bool "bootd"
> - default y
> - help
> - Run the command stored in the environment "bootcmd", i.e.
> - "bootd" does the same thing as "run bootcmd".
> -
> -config CMD_BOOTM
> - bool "bootm"
> - default y
> - help
> - Boot an application image from the memory.
> -
> -config CMD_ELF
> - bool "bootelf, bootvx"
> - default y
> - help
> - Boot an ELF/vxWorks image from the memory.
> -
> -config CMD_GO
> - bool "go"
> - default y
> - help
> - Start an application at a given address.
> -
> -config CMD_RUN
> - bool "run"
> - default y
> - help
> - Run the command in the given environment variable.
> -
> -config CMD_IMI
> - bool "iminfo"
> - default y
> - help
> - Print header information for application image.
> -
> -config CMD_IMLS
> - bool "imls"
> - default y
> - help
> - List all images found in flash
> -
> -config CMD_XIMG
> - bool "imxtract"
> - default y
> - help
> - Extract a part of a multi-image.
> -
> -config CMD_POWEROFF
> - bool
> -
> -endmenu
> -
> -menu "Environment commands"
> -
> -config CMD_EXPORTENV
> - bool "env export"
> - default y
> - help
> - Export environments.
> -
> -config CMD_IMPORTENV
> - bool "env import"
> - default y
> - help
> - Import environments.
> -
> -config CMD_EDITENV
> - bool "editenv"
> - default y
> - help
> - Edit environment variable.
> -
> -config CMD_SAVEENV
> - bool "saveenv"
> - default y
> - help
> - Save all environment variables into the compiled-in persistent
> - storage.
> -
> -config CMD_ENV_EXISTS
> - bool "env exists"
> - default y
> - help
> - Check if a variable is defined in the environment for use in
> - shell scripting.
> -
> -endmenu
> -
> -menu "Memory commands"
> -
> -config CMD_MEMORY
> - bool "md, mm, nm, mw, cp, cmp, base, loop"
> - default y
> - help
> - Memeory commands.
> - md - memory display
> - mm - memory modify (auto-incrementing address)
> - nm - memory modify (constant address)
> - mw - memory write (fill)
> - cp - memory copy
> - cmp - memory compare
> - base - print or set address offset
> - loop - initinite loop on address range
> -
> -config CMD_CRC32
> - bool "crc32"
> - default y
> - help
> - Compute CRC32.
> -
> -config LOOPW
> - bool "loopw"
> - help
> - Infinite write loop on address range
> -
> -config CMD_MEMTEST
> - bool "memtest"
> - help
> - Simple RAM read/write test.
> -
> -config CMD_MX_CYCLIC
> - bool "mdc, mwc"
> - help
> - mdc - memory display cyclic
> - mwc - memory write cyclic
> -
> -config CMD_MEMINFO
> - bool "meminfo"
> - help
> - Display memory information.
> -
> -endmenu
> -
> -menu "Device access commands"
> -
> -config CMD_DM
> - bool "dm - Access to driver model information"
> - depends on DM
> - default y
> - help
> - Provides access to driver model data structures and information,
> - such as a list of devices, list of uclasses and the state of each
> - device (e.g. activated). This is not required for operation, but
> - can be useful to see the state of driver model for debugging or
> - interest.
> -
> -config CMD_DEMO
> - bool "demo - Demonstration commands for driver model"
> - depends on DM
> - help
> - Provides a 'demo' command which can be used to play around with
> - driver model. To use this properly you will need to enable one or
> - both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
> - Otherwise you will always get an empty list of devices. The demo
> - devices are defined in the sandbox device tree, so the easiest
> - option is to use sandbox and pass the -d point to sandbox's
> - u-boot.dtb file.
> -
> -config CMD_LOADB
> - bool "loadb"
> - default y
> - help
> - Load a binary file over serial line.
> -
> -config CMD_LOADS
> - bool "loads"
> - default y
> - help
> - Load an S-Record file over serial line
> -
> -config CMD_FLASH
> - bool "flinfo, erase, protect"
> - default y
> - help
> - NOR flash support.
> - flinfo - print FLASH memory information
> - erase - FLASH memory
> - protect - enable or disable FLASH write protection
> -
> -config CMD_ARMFLASH
> - depends on FLASH_CFI_DRIVER
> - bool "armflash"
> - help
> - ARM Ltd reference designs flash partition access
> -
> -config CMD_NAND
> - bool "nand"
> - help
> - NAND support.
> -
> -config CMD_SF
> - bool "sf"
> - help
> - SPI Flash support
> -
> -config CMD_SPI
> - bool "sspi"
> - help
> - SPI utility command.
> -
> -config CMD_I2C
> - bool "i2c"
> - help
> - I2C support.
> -
> -config CMD_USB
> - bool "usb"
> - help
> - USB support.
> -
> -config CMD_FPGA
> - bool "fpga"
> - default y
> - help
> - FPGA support.
> -
> -config CMD_REMOTEPROC
> - bool "remoteproc"
> - depends on REMOTEPROC
> - help
> - Support for Remote Processor control
> -
> -config CMD_GPIO
> - bool "gpio"
> - help
> - GPIO support.
> -
> -endmenu
> -
> -
> -menu "Shell scripting commands"
> -
> -config CMD_ECHO
> - bool "echo"
> - default y
> - help
> - Echo args to console
> -
> -config CMD_ITEST
> - bool "itest"
> - default y
> - help
> - Return true/false on integer compare.
> -
> -config CMD_SOURCE
> - bool "source"
> - default y
> - help
> - Run script from memory
> -
> -config CMD_SETEXPR
> - bool "setexpr"
> - default y
> - help
> - Evaluate boolean and math expressions and store the result in an env
> - variable.
> - Also supports loading the value at a memory location into a variable.
> - If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
> -
> -endmenu
> -
> -menu "Network commands"
> -
> -config CMD_NET
> - bool "bootp, tftpboot"
> - select NET
> - default y
> - help
> - Network commands.
> - bootp - boot image via network using BOOTP/TFTP protocol
> - tftpboot - boot image via network using TFTP protocol
> -
> -config CMD_TFTPPUT
> - bool "tftp put"
> - help
> - TFTP put command, for uploading files to a server
> -
> -config CMD_TFTPSRV
> - bool "tftpsrv"
> - help
> - Act as a TFTP server and boot the first received file
> -
> -config CMD_RARP
> - bool "rarpboot"
> - help
> - Boot image via network using RARP/TFTP protocol
> -
> -config CMD_DHCP
> - bool "dhcp"
> - help
> - Boot image via network using DHCP/TFTP protocol
> -
> -config CMD_NFS
> - bool "nfs"
> - default y
> - help
> - Boot image via network using NFS protocol.
> -
> -config CMD_PING
> - bool "ping"
> - help
> - Send ICMP ECHO_REQUEST to network host
> -
> -config CMD_CDP
> - bool "cdp"
> - help
> - Perform CDP network configuration
> -
> -config CMD_SNTP
> - bool "sntp"
> - help
> - Synchronize RTC via network
> -
> -config CMD_DNS
> - bool "dns"
> - help
> - Lookup the IP of a hostname
> -
> -config CMD_LINK_LOCAL
> - bool "linklocal"
> - help
> - Acquire a network IP address using the link-local protocol
> -
> -endmenu
> -
> -menu "Misc commands"
> -
> -config CMD_AMBAPP
> - bool "ambapp"
> - depends on LEON3
> - default y
> - help
> - Lists AMBA Plug-n-Play information.
> -
> -config SYS_AMBAPP_PRINT_ON_STARTUP
> - bool "Show AMBA PnP info on startup"
> - depends on CMD_AMBAPP
> - default n
> - help
> - Show AMBA Plug-n-Play information on startup.
> -
> -config CMD_TIME
> - bool "time"
> - help
> - Run commands and summarize execution time.
> -
> -# TODO: rename to CMD_SLEEP
> -config CMD_MISC
> - bool "sleep"
> - default y
> - help
> - Delay execution for some time
> -
> -config CMD_TIMER
> - bool "timer"
> - help
> - Access the system timer.
> -
> -config CMD_SETGETDCR
> - bool "getdcr, setdcr, getidcr, setidcr"
> - depends on 4xx
> - default y
> - help
> - getdcr - Get an AMCC PPC 4xx DCR's value
> - setdcr - Set an AMCC PPC 4xx DCR's value
> - getidcr - Get a register value via indirect DCR addressing
> - setidcr - Set a register value via indirect DCR addressing
> -
> -config CMD_SOUND
> - bool "sound"
> - depends on SOUND
> - help
> - This provides basic access to the U-Boot's sound support. The main
> - feature is to play a beep.
> -
> - sound init - set up sound system
> - sound play - play a sound
> -
> -endmenu
> -
> menu "Boot timing"
>
> config BOOTSTAGE
> @@ -565,13 +46,6 @@ config BOOTSTAGE_USER_COUNT
> a new ID will be allocated from this stash. If you exceed
> the limit, recording will stop.
>
> -config CMD_BOOTSTAGE
> - bool "Enable the 'bootstage' command"
> - depends on BOOTSTAGE
> - help
> - Add a 'bootstage' command which supports printing a report
> - and un/stashing of bootstage data.
> -
> config BOOTSTAGE_FDT
> bool "Store boot timing information in the OS device tree"
> depends on BOOTSTAGE
> @@ -623,66 +97,6 @@ config BOOTSTAGE_STASH_SIZE
>
> endmenu
>
> -menu "Power commands"
> -config CMD_PMIC
> - bool "Enable Driver Model PMIC command"
> - depends on DM_PMIC
> - help
> - This is the pmic command, based on a driver model pmic's API.
> - Command features are unchanged:
> - - list - list pmic devices
> - - pmic dev <id> - show or [set] operating pmic device (NEW)
> - - pmic dump - dump registers
> - - pmic read address - read byte of register at address
> - - pmic write address - write byte to register at address
> - The only one change for this command is 'dev' subcommand.
> -
> -config CMD_REGULATOR
> - bool "Enable Driver Model REGULATOR command"
> - depends on DM_REGULATOR
> - help
> - This command is based on driver model regulator's API.
> - User interface features:
> - - list - list regulator devices
> - - regulator dev <id> - show or [set] operating regulator device
> - - regulator info - print constraints info
> - - regulator status - print operating status
> - - regulator value <val] <-f> - print/[set] voltage value [uV]
> - - regulator current <val> - print/[set] current value [uA]
> - - regulator mode <id> - print/[set] operating mode id
> - - regulator enable - enable the regulator output
> - - regulator disable - disable the regulator output
> -
> - The '-f' (force) option can be used for set the value which exceeds
> - the limits, which are found in device-tree and are kept in regulator's
> - uclass platdata structure.
> -
> -endmenu
> -
> -menu "Security commands"
> -config CMD_TPM
> - bool "Enable the 'tpm' command"
> - depends on TPM
> - help
> - This provides a means to talk to a TPM from the command line. A wide
> - range of commands if provided - see 'tpm help' for details. The
> - command requires a suitable TPM on your board and the correct driver
> - must be enabled.
> -
> -config CMD_TPM_TEST
> - bool "Enable the 'tpm test' command"
> - depends on CMD_TPM
> - help
> - This provides a a series of tests to confirm that the TPM is working
> - correctly. The tests cover initialisation, non-volatile RAM, extend,
> - global lock and checking that timing is within expectations. The
> - tests pass correctly on Infineon TPMs but may need to be adjusted
> - for other devices.
> -
> -endmenu
> -
> -endmenu
> -
> config CONSOLE_RECORD
> bool "Console recording"
> help
> diff --git a/common/Makefile b/common/Makefile
> index 2a1d9f8..fcf972d 100644
> --- a/common/Makefile
> +++ b/common/Makefile
> @@ -31,11 +31,7 @@ obj-$(CONFIG_SYS_GENERIC_BOARD) += board_r.o
> obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
> obj-$(CONFIG_DISPLAY_BOARDINFO_LATE) += board_info.o
>
> -# core command
> -obj-y += cmd_boot.o
> -obj-$(CONFIG_CMD_BOOTM) += cmd_bootm.o bootm.o bootm_os.o
> -obj-y += cmd_help.o
> -obj-y += cmd_version.o
> +obj-$(CONFIG_CMD_BOOTM) += bootm.o bootm_os.o
>
> # environment
> obj-y += env_attr.o
> @@ -58,143 +54,17 @@ obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o
> obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o
> obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
>
> -# command
> -obj-$(CONFIG_CMD_AES) += cmd_aes.o
> -obj-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
> -obj-$(CONFIG_CMD_ARMFLASH) += cmd_armflash.o
> -obj-$(CONFIG_SOURCE) += cmd_source.o
> -obj-$(CONFIG_CMD_SOURCE) += cmd_source.o
> -obj-$(CONFIG_CMD_BDI) += cmd_bdinfo.o
> -obj-$(CONFIG_CMD_BEDBUG) += bedbug.o cmd_bedbug.o
> -obj-$(CONFIG_CMD_BMP) += cmd_bmp.o
> -obj-$(CONFIG_CMD_BOOTMENU) += cmd_bootmenu.o
> -obj-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o
> -obj-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o
> -obj-$(CONFIG_CMD_CACHE) += cmd_cache.o
> -obj-$(CONFIG_CMD_CBFS) += cmd_cbfs.o
> -obj-$(CONFIG_CMD_CLK) += cmd_clk.o
> -obj-$(CONFIG_CMD_CONSOLE) += cmd_console.o
> -obj-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o
> -obj-$(CONFIG_CMD_CPU) += cmd_cpu.o
> -obj-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o
> -obj-$(CONFIG_CMD_DATE) += cmd_date.o
> -obj-$(CONFIG_CMD_DEMO) += cmd_demo.o
> -obj-$(CONFIG_CMD_SOUND) += cmd_sound.o
> -ifdef CONFIG_4xx
> -obj-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o
> -endif
> -ifdef CONFIG_POST
> -obj-$(CONFIG_CMD_DIAG) += cmd_diag.o
> -endif
> -obj-$(CONFIG_CMD_DISPLAY) += cmd_display.o
> -obj-$(CONFIG_CMD_DTT) += cmd_dtt.o
> -obj-$(CONFIG_CMD_ECHO) += cmd_echo.o
> -obj-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o
> -obj-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
> -obj-$(CONFIG_EFI_STUB) += cmd_efi.o
> -obj-$(CONFIG_CMD_ELF) += cmd_elf.o
> -obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o
> -obj-$(CONFIG_CMD_EXT4) += cmd_ext4.o
> -obj-$(CONFIG_CMD_EXT2) += cmd_ext2.o
> -obj-$(CONFIG_CMD_FAT) += cmd_fat.o
> -obj-$(CONFIG_CMD_FDC) += cmd_fdc.o
> -obj-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
> -obj-$(CONFIG_CMD_FITUPD) += cmd_fitupd.o
> -obj-$(CONFIG_CMD_FLASH) += cmd_flash.o
> -ifdef CONFIG_FPGA
> -obj-$(CONFIG_CMD_FPGA) += cmd_fpga.o
> -endif
> -obj-$(CONFIG_CMD_FPGAD) += cmd_fpgad.o
> -obj-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o
> -obj-$(CONFIG_CMD_FUSE) += cmd_fuse.o
> -obj-$(CONFIG_CMD_GETTIME) += cmd_gettime.o
> -obj-$(CONFIG_CMD_GPIO) += cmd_gpio.o
> -obj-$(CONFIG_CMD_I2C) += cmd_i2c.o
> -obj-$(CONFIG_CMD_IOTRACE) += cmd_iotrace.o
> -obj-$(CONFIG_CMD_HASH) += cmd_hash.o
> -obj-$(CONFIG_CMD_IDE) += cmd_ide.o
> -obj-$(CONFIG_CMD_IMMAP) += cmd_immap.o
> -obj-$(CONFIG_CMD_INI) += cmd_ini.o
> -obj-$(CONFIG_CMD_IRQ) += cmd_irq.o
> -obj-$(CONFIG_CMD_ITEST) += cmd_itest.o
> -obj-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
> -obj-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o
> -obj-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o
> -obj-$(CONFIG_CMD_LED) += cmd_led.o
> -obj-$(CONFIG_CMD_LICENSE) += cmd_license.o
> -obj-y += cmd_load.o
> -obj-$(CONFIG_LOGBUFFER) += cmd_log.o
> -obj-$(CONFIG_ID_EEPROM) += cmd_mac.o
> -obj-$(CONFIG_CMD_MD5SUM) += cmd_md5sum.o
> -obj-$(CONFIG_CMD_MEMORY) += cmd_mem.o
> -obj-$(CONFIG_CMD_IO) += cmd_io.o
> -obj-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
> +obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
> +obj-$(CONFIG_OF_LIBFDT) += fdt_support.o
> +
> obj-$(CONFIG_MII) += miiphyutil.o
> obj-$(CONFIG_CMD_MII) += miiphyutil.o
> obj-$(CONFIG_PHYLIB) += miiphyutil.o
> -obj-$(CONFIG_CMD_MII) += cmd_mii.o
> -ifdef CONFIG_PHYLIB
> -obj-$(CONFIG_CMD_MII) += cmd_mdio.o
> -endif
> -obj-$(CONFIG_CMD_MISC) += cmd_misc.o
> -obj-$(CONFIG_CMD_MMC) += cmd_mmc.o
> -obj-$(CONFIG_CMD_MMC_SPI) += cmd_mmc_spi.o
> -obj-$(CONFIG_MP) += cmd_mp.o
> -obj-$(CONFIG_CMD_MTDPARTS) += cmd_mtdparts.o
> -obj-$(CONFIG_CMD_NAND) += cmd_nand.o
> -obj-$(CONFIG_CMD_NET) += cmd_net.o
> -obj-$(CONFIG_CMD_ONENAND) += cmd_onenand.o
> -obj-$(CONFIG_CMD_OTP) += cmd_otp.o
> -obj-$(CONFIG_CMD_PART) += cmd_part.o
> -ifdef CONFIG_PCI
> -obj-$(CONFIG_CMD_PCI) += cmd_pci.o
> -endif
> -obj-y += cmd_pcmcia.o
> -obj-$(CONFIG_CMD_PORTIO) += cmd_portio.o
> -obj-$(CONFIG_CMD_PXE) += cmd_pxe.o
> -obj-$(CONFIG_CMD_READ) += cmd_read.o
> -obj-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o
> -obj-$(CONFIG_CMD_REISER) += cmd_reiser.o
> -obj-$(CONFIG_CMD_REMOTEPROC) += cmd_remoteproc.o
> -obj-$(CONFIG_SANDBOX) += cmd_host.o
> -obj-$(CONFIG_CMD_SATA) += cmd_sata.o
> -obj-$(CONFIG_CMD_SF) += cmd_sf.o
> -obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o
> -obj-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o
> -obj-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o
> -obj-$(CONFIG_CMD_SOFTSWITCH) += cmd_softswitch.o
> -obj-$(CONFIG_CMD_SPI) += cmd_spi.o
> -obj-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o
> -obj-$(CONFIG_CMD_STRINGS) += cmd_strings.o
> -obj-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o
> -obj-$(CONFIG_CMD_TIME) += cmd_time.o
> -obj-$(CONFIG_CMD_TRACE) += cmd_trace.o
> -obj-$(CONFIG_SYS_HUSH_PARSER) += cmd_test.o
> -obj-$(CONFIG_CMD_TPM) += cmd_tpm.o
> -obj-$(CONFIG_CMD_TPM_TEST) += cmd_tpm_test.o
> -obj-$(CONFIG_CMD_TSI148) += cmd_tsi148.o
> -obj-$(CONFIG_CMD_UBI) += cmd_ubi.o
> -obj-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o
> -obj-$(CONFIG_CMD_UNIVERSE) += cmd_universe.o
> -obj-$(CONFIG_CMD_UNZIP) += cmd_unzip.o
> -ifdef CONFIG_LZMA
> -obj-$(CONFIG_CMD_LZMADEC) += cmd_lzmadec.o
> -endif
> +
> ifdef CONFIG_CMD_USB
> -obj-y += cmd_usb.o
> obj-y += usb.o usb_hub.o
> obj-$(CONFIG_USB_STORAGE) += usb_storage.o
> endif
> -obj-$(CONFIG_CMD_FASTBOOT) += cmd_fastboot.o
> -obj-$(CONFIG_CMD_FS_UUID) += cmd_fs_uuid.o
> -
> -obj-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o
> -obj-$(CONFIG_CMD_THOR_DOWNLOAD) += cmd_thordown.o
> -obj-$(CONFIG_CMD_XIMG) += cmd_ximg.o
> -obj-$(CONFIG_YAFFS2) += cmd_yaffs2.o
> -obj-$(CONFIG_CMD_SPL) += cmd_spl.o
> -obj-$(CONFIG_CMD_ZIP) += cmd_zip.o
> -obj-$(CONFIG_CMD_ZFS) += cmd_zfs.o
>
> # others
> obj-$(CONFIG_BOOTSTAGE) += bootstage.o
> @@ -214,14 +84,8 @@ obj-$(CONFIG_MODEM_SUPPORT) += modem.o
> obj-$(CONFIG_UPDATE_TFTP) += update.o
> obj-$(CONFIG_DFU_TFTP) += update.o
> obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
> -obj-$(CONFIG_CMD_DFU) += cmd_dfu.o
> -obj-$(CONFIG_CMD_GPT) += cmd_gpt.o
> -obj-$(CONFIG_CMD_ETHSW) += cmd_ethsw.o
>
> -# Power
> -obj-$(CONFIG_CMD_PMIC) += cmd_pmic.o
> -obj-$(CONFIG_CMD_REGULATOR) += cmd_regulator.o
> -endif
> +endif # !CONFIG_SPL_BUILD
>
> ifdef CONFIG_SPL_BUILD
> obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
> @@ -232,9 +96,6 @@ ifdef CONFIG_SPL_USB_HOST_SUPPORT
> obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
> obj-$(CONFIG_USB_STORAGE) += usb_storage.o
> endif
> -ifdef CONFIG_SPL_SATA_SUPPORT
> -obj-$(CONFIG_CMD_SCSI) += cmd_scsi.o
> -endif
> # environment
> ifdef CONFIG_SPL_ENV_SUPPORT
> obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
> @@ -248,8 +109,6 @@ obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
> obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
> endif
> endif
> -# core command
> -obj-y += cmd_nvedit.o
> #environment
> obj-y += env_common.o
> #others
> @@ -287,8 +146,6 @@ obj-y += fb_nand.o
> endif
> endif
>
> -obj-$(CONFIG_CMD_BLOB) += cmd_blob.o
> -
> # We always have this since drivers/ddr/fs/interactive.c needs it
> obj-y += cli_simple.o
>
> @@ -297,6 +154,5 @@ obj-y += cli_readline.o
> obj-y += command.o
> obj-y += s_record.o
> obj-y += xyzModem.o
> -obj-y += cmd_disk.o
>
> CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
> diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
> index 96f414a..dff16b9 100644
> --- a/scripts/Makefile.spl
> +++ b/scripts/Makefile.spl
> @@ -53,7 +53,7 @@ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
>
> libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
> libs-y += common/init/
> -libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
> +libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
> libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
> libs-y += drivers/
> libs-y += dts/
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2016-01-18 5:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-18 3:53 [U-Boot] [PATCH 0/2] Move commands into their own directory Simon Glass
2016-01-18 3:53 ` [U-Boot] [PATCH 1/2] Move all command code into its " Simon Glass
2016-01-18 4:51 ` Bin Meng
2016-01-18 5:38 ` Heiko Schocher [this message]
2016-01-18 6:03 ` Stefan Roese
2016-01-18 8:28 ` Przemyslaw Marczak
2016-01-19 3:59 ` Masahiro Yamada
2016-01-19 15:53 ` Tom Rini
2016-01-20 4:35 ` Simon Glass
2016-01-25 21:28 ` [U-Boot] [U-Boot, " Tom Rini
2016-01-18 3:53 ` [U-Boot] [PATCH 2/2] Remove the cmd_ prefix from command files Simon Glass
2016-01-18 4:51 ` Bin Meng
2016-01-18 5:38 ` Heiko Schocher
2016-01-18 6:04 ` Stefan Roese
2016-01-18 8:29 ` Przemyslaw Marczak
2016-01-25 21:28 ` [U-Boot] [U-Boot, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=569C7A3B.50507@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.