From: Jorge Ramirez Ortiz <jro@xenomai.org>
To: xenomai@xenomai.org, alexandre.lopes.ext@zeiss.com
Subject: Re: [Xenomai] Analogy and PCI-6289 issue
Date: Tue, 19 Jan 2016 07:35:59 -0500 [thread overview]
Message-ID: <569E2DAF.4010203@xenomai.org> (raw)
In-Reply-To: <79A9E4882C44D44FA53B5AB15E619801260C7E3E@ADEERL01SMS001.cznet.zeiss.org>
On 01/15/2016 06:30 AM, Lopes, Alexandre wrote:
> analogy_config: a4l_attach(analogy_ni_pcimio) failed err=-1
> analogy_config: check the procfs information:
> - analogy devices: /proc/analogy/devices
> - analogy drivers: /proc/analogy/drivers
>
> and in dmesg
>
> [1792.306659] Analogy: a4l_assign_driver: call(drv->attach) failed (ret=-2)
>
> I have already tried to swap pci slots, to use only one card, to omit the driver parameters
> etc. and the end result is always the same: I can attach the driver to the 6713 but not to
> the 6289.
>
> Could anyone help me shed some light on the issue?
please check
http://git.xenomai.org/xenomai-3.git/tree/kernel/drivers/analogy/national_instruments/pcimio.c#n1055
support for the 6289 (ie 0x70ac) is in the todo list - disabled by the
conditional compilation statement.
since you have the hw, you could enable it and try to get it to work: it
shouldnt be too hard (I dislocated my shoulder last week so Icant provide much
coding support at the moment..maybe in a couple of weeks)
--
jro
next prev parent reply other threads:[~2016-01-19 12:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-15 11:30 [Xenomai] Analogy and PCI-6289 issue Lopes, Alexandre
2016-01-19 12:35 ` Jorge Ramirez Ortiz [this message]
2016-01-19 14:08 ` Lopes, Alexandre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=569E2DAF.4010203@xenomai.org \
--to=jro@xenomai.org \
--cc=alexandre.lopes.ext@zeiss.com \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.