Re: [PATCH v6 1/9] ppc64 (le): prepare for -mprofile-kernel

[AKASHI Takahiro <takahiro.akashi@linaro.org>]

Hi,

On 01/26/2016 12:26 AM, Torsten Duwe wrote:
> The gcc switch -mprofile-kernel, available for ppc64 on gcc > 4.8.5,
> allows to call _mcount very early in the function, which low-level
> ASM code and code patching functions need to consider.
> Especially the link register and the parameter registers are still
> alive and not yet saved into a new stack frame.

I'm thinking of implementing live patch support *for arm64*, and as part of
those efforts, we are proposing[1] a new *generic* gcc option, -fprolog-add=N.
This option will insert N nop instructions at the beginning of each function.
So we have to initialize those codes at the boot time to later utilize
them for FTRACE_WITH_REGS. Other than that, it will work similarly
with -mfentry on x86 (and -mprofile-kernel?).

I'm totally unfamiliar with ppc architecture, but just wondering
whether this option will also be useful for other architectures.

I will really appreciate you if you share your thoughts with me, please?

[1]  https://gcc.gnu.org/ml/gcc/2015-05/msg00267.html, and
      https://gcc.gnu.org/ml/gcc/2015-10/msg00090.html

Thanks,
-Takahiro AKASHI

> Signed-off-by: Torsten Duwe <duwe@suse.de>
> ---
>   arch/powerpc/kernel/entry_64.S  | 45 +++++++++++++++++++++++++++++++++++++++--
>   arch/powerpc/kernel/ftrace.c    | 12 +++++++++--
>   arch/powerpc/kernel/module_64.c | 14 +++++++++++++
>   3 files changed, 67 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
> index a94f155..e7cd043 100644
> --- a/arch/powerpc/kernel/entry_64.S
> +++ b/arch/powerpc/kernel/entry_64.S
> @@ -1206,7 +1206,12 @@ _GLOBAL(enter_prom)
>   #ifdef CONFIG_DYNAMIC_FTRACE
>   _GLOBAL(mcount)
>   _GLOBAL(_mcount)
> -	blr
> +	std	r0,LRSAVE(r1) /* gcc6 does this _after_ this call _only_ */
> +	mflr	r0
> +	mtctr	r0
> +	ld	r0,LRSAVE(r1)
> +	mtlr	r0
> +	bctr
>
>   _GLOBAL_TOC(ftrace_caller)
>   	/* Taken from output of objdump from lib64/glibc */
> @@ -1262,13 +1267,28 @@ _GLOBAL(ftrace_stub)
>
>   #ifdef CONFIG_FUNCTION_GRAPH_TRACER
>   _GLOBAL(ftrace_graph_caller)
> +#ifdef CC_USING_MPROFILE_KERNEL
> +	/* with -mprofile-kernel, parameter regs are still alive at _mcount */
> +	std	r10, 104(r1)
> +	std	r9, 96(r1)
> +	std	r8, 88(r1)
> +	std	r7, 80(r1)
> +	std	r6, 72(r1)
> +	std	r5, 64(r1)
> +	std	r4, 56(r1)
> +	std	r3, 48(r1)
> +	mfctr	r4		/* ftrace_caller has moved local addr here */
> +	std	r4, 40(r1)
> +	mflr	r3		/* ftrace_caller has restored LR from stack */
> +#else
>   	/* load r4 with local address */
>   	ld	r4, 128(r1)
> -	subi	r4, r4, MCOUNT_INSN_SIZE
>
>   	/* Grab the LR out of the caller stack frame */
>   	ld	r11, 112(r1)
>   	ld	r3, 16(r11)
> +#endif
> +	subi	r4, r4, MCOUNT_INSN_SIZE
>
>   	bl	prepare_ftrace_return
>   	nop
> @@ -1277,6 +1297,26 @@ _GLOBAL(ftrace_graph_caller)
>   	 * prepare_ftrace_return gives us the address we divert to.
>   	 * Change the LR in the callers stack frame to this.
>   	 */
> +
> +#ifdef CC_USING_MPROFILE_KERNEL
> +	mtlr	r3
> +
> +	ld	r0, 40(r1)
> +	mtctr	r0
> +	ld	r10, 104(r1)
> +	ld	r9, 96(r1)
> +	ld	r8, 88(r1)
> +	ld	r7, 80(r1)
> +	ld	r6, 72(r1)
> +	ld	r5, 64(r1)
> +	ld	r4, 56(r1)
> +	ld	r3, 48(r1)
> +
> +	addi	r1, r1, 112
> +	mflr	r0
> +	std	r0, LRSAVE(r1)
> +	bctr
> +#else
>   	ld	r11, 112(r1)
>   	std	r3, 16(r11)
>
> @@ -1284,6 +1324,7 @@ _GLOBAL(ftrace_graph_caller)
>   	mtlr	r0
>   	addi	r1, r1, 112
>   	blr
> +#endif
>
>   _GLOBAL(return_to_handler)
>   	/* need to save return values */
> diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
> index 44d4d8e..080c525 100644
> --- a/arch/powerpc/kernel/ftrace.c
> +++ b/arch/powerpc/kernel/ftrace.c
> @@ -306,11 +306,19 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
>   	 * The load offset is different depending on the ABI. For simplicity
>   	 * just mask it out when doing the compare.
>   	 */
> +#ifndef CC_USING_MPROFILE_KERNEL
>   	if ((op[0] != 0x48000008) || ((op[1] & 0xffff0000) != 0xe8410000)) {
> -		pr_err("Unexpected call sequence: %x %x\n", op[0], op[1]);
> +		pr_err("Unexpected call sequence at %p: %x %x\n",
> +		ip, op[0], op[1]);
>   		return -EINVAL;
>   	}
> -
> +#else
> +	/* look for patched "NOP" on ppc64 with -mprofile-kernel */
> +	if (op[0] != 0x60000000) {
> +		pr_err("Unexpected call at %p: %x\n", ip, op[0]);
> +		return -EINVAL;
> +	}
> +#endif
>   	/* If we never set up a trampoline to ftrace_caller, then bail */
>   	if (!rec->arch.mod->arch.tramp) {
>   		pr_err("No ftrace trampoline\n");
> diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
> index 6838451..30f6be1 100644
> --- a/arch/powerpc/kernel/module_64.c
> +++ b/arch/powerpc/kernel/module_64.c
> @@ -475,6 +475,20 @@ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
>   static int restore_r2(u32 *instruction, struct module *me)
>   {
>   	if (*instruction != PPC_INST_NOP) {
> +#ifdef CC_USING_MPROFILE_KERNEL
> +		/* -mprofile_kernel sequence starting with
> +		 * mflr r0 and maybe std r0, LRSAVE(r1)
> +		 */
> +		if ((instruction[-3] == 0x7c0802a6 &&
> +		    instruction[-2] == 0xf8010010) ||
> +		    instruction[-2] == 0x7c0802a6) {
> +			/* Nothing to be done here, it's an _mcount
> +			 * call location and r2 will have to be
> +			 * restored in the _mcount function.
> +			 */
> +			return 1;
> +		};
> +#endif
>   		pr_err("%s: Expect noop after relocate, got %08x\n",
>   		       me->name, *instruction);
>   		return 0;
>