[PATCH V5 00/10] aacraid: Patchset for aacraid driver version 41052

[PATCH V5 00/10] aacraid: Patchset for aacraid driver version 41052

[Raghava Aditya Renukunta]

This patchset includes the following changes (bug fixes and new feature
support) specific to aacraid driver.

V2:
Removed aac_fib_free_tag function
Setup relevant fib variables only once
Created aac_fib_vector_assign function
Made EEH functions static
Added character device status macros
changed location of aac->shutdown to prevent race condition
Withdrew patch that disables device ID wild card binding
Added Reviewed-by, Cc and Fixes tags from  mailing list

V3:
Moved aac_send_shutdown to top of __aac_shutdown
Converted aac->adapter_shutdown to atomic

V4:
Reverted adapter_shutdown from atomic
Used mutex to prevent shutdown race conditions on ioctl path

V5:
Created new patch for ioctl_mutex
Moved ioctl_mutex to aac_do_ioctl
Fixed CONFIG_PM compilation issue

Raghava Aditya Renukunta (10):
  [SCSI] aacraid: SCSI blk tag support
  [SCSI]  aacraid: Fix RRQ overload
  [SCSI]  aacraid: Added EEH support
  [SCSI]  aacraid: Fix memory leak in aac_fib_map_free
  [SCSI]  aacraid: Set correct msix count for EEH recovery
  [SCSI]  aacraid: Fundamental reset support for Series 7
  [SCSI]  aacraid: Created new mutex for ioctl path
  [SCSI]  aacraid: Fix AIF triggered IOP_RESET
  [SCSI]  aacraid: Fix character device re-initialization
  [SCSI]  aacraid: Update driver version

 drivers/scsi/aacraid/aachba.c   |  27 +++---
 drivers/scsi/aacraid/aacraid.h  |  14 ++-
 drivers/scsi/aacraid/commctrl.c |   7 ++
 drivers/scsi/aacraid/comminit.c |   6 +-
 drivers/scsi/aacraid/commsup.c  |  69 ++++++++++++--
 drivers/scsi/aacraid/dpcsup.c   |   2 -
 drivers/scsi/aacraid/linit.c    | 198 +++++++++++++++++++++++++++++++++++-----
 drivers/scsi/aacraid/src.c      |  30 ++----
 8 files changed, 283 insertions(+), 70 deletions(-)

-- 
1.9.1

[PATCH V5 01/10] aacraid: SCSI blk tag support

[Raghava Aditya Renukunta]

From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>

The method to allocate and free FIB's in the present code utilizes
spinlocks.Multiple IO's have to wait on the spinlock to acquire or
free fibs creating a performance bottleneck.

An alternative solution would be to use block layer tags to keep track
of the fibs allocated and freed. To this end aac_fib_alloc_tag was
created to utilize the blk layer tags to plug into the Fib pool.These
functions are used exclusively in the IO path. 8 fibs are reserved for
the use of AIF management software and utilize the previous spinlock based
implementations.

Changes in V2:
Removed aac_fib_free_tag since it was a stub function
Moved population of fib fields that are constant to aac_fib_setup

Changes in V3:
None

Changes in V4:
None

Changes in V5:
None

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@pmcs.com>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
---
 drivers/scsi/aacraid/aachba.c  | 27 ++++++++++++---------------
 drivers/scsi/aacraid/aacraid.h |  1 +
 drivers/scsi/aacraid/commsup.c | 32 +++++++++++++++++++++++++++++---
 drivers/scsi/aacraid/dpcsup.c  |  2 --
 drivers/scsi/aacraid/linit.c   |  2 ++
 5 files changed, 44 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index e4c2437..7dfd0fa 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -323,7 +323,6 @@ static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
 	if (unlikely(!scsicmd || !scsicmd->scsi_done)) {
 		dprintk((KERN_WARNING "aac_valid_context: scsi command corrupt\n"));
 		aac_fib_complete(fibptr);
-		aac_fib_free(fibptr);
 		return 0;
 	}
 	scsicmd->SCp.phase = AAC_OWNER_MIDLEVEL;
@@ -331,7 +330,6 @@ static inline int aac_valid_context(struct scsi_cmnd *scsicmd,
 	if (unlikely(!device || !scsi_device_online(device))) {
 		dprintk((KERN_WARNING "aac_valid_context: scsi device corrupt\n"));
 		aac_fib_complete(fibptr);
-		aac_fib_free(fibptr);
 		return 0;
 	}
 	return 1;
@@ -541,7 +539,6 @@ static void get_container_name_callback(void *context, struct fib * fibptr)
 	scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
 
 	aac_fib_complete(fibptr);
-	aac_fib_free(fibptr);
 	scsicmd->scsi_done(scsicmd);
 }
 
@@ -557,7 +554,8 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 
 	dev = (struct aac_dev *)scsicmd->device->host->hostdata;
 
-	if (!(cmd_fibcontext = aac_fib_alloc(dev)))
+	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+	if (!cmd_fibcontext)
 		return -ENOMEM;
 
 	aac_fib_init(cmd_fibcontext);
@@ -586,7 +584,6 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
 
 	printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status);
 	aac_fib_complete(cmd_fibcontext);
-	aac_fib_free(cmd_fibcontext);
 	return -1;
 }
 
@@ -1024,7 +1021,6 @@ static void get_container_serial_callback(void *context, struct fib * fibptr)
 	scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
 
 	aac_fib_complete(fibptr);
-	aac_fib_free(fibptr);
 	scsicmd->scsi_done(scsicmd);
 }
 
@@ -1040,7 +1036,8 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
 
 	dev = (struct aac_dev *)scsicmd->device->host->hostdata;
 
-	if (!(cmd_fibcontext = aac_fib_alloc(dev)))
+	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+	if (!cmd_fibcontext)
 		return -ENOMEM;
 
 	aac_fib_init(cmd_fibcontext);
@@ -1068,7 +1065,6 @@ static int aac_get_container_serial(struct scsi_cmnd * scsicmd)
 
 	printk(KERN_WARNING "aac_get_container_serial: aac_fib_send failed with status: %d.\n", status);
 	aac_fib_complete(cmd_fibcontext);
-	aac_fib_free(cmd_fibcontext);
 	return -1;
 }
 
@@ -1869,7 +1865,6 @@ static void io_callback(void *context, struct fib * fibptr)
 		break;
 	}
 	aac_fib_complete(fibptr);
-	aac_fib_free(fibptr);
 
 	scsicmd->scsi_done(scsicmd);
 }
@@ -1954,7 +1949,8 @@ static int aac_read(struct scsi_cmnd * scsicmd)
 	/*
 	 *	Alocate and initialize a Fib
 	 */
-	if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
+	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+	if (!cmd_fibcontext) {
 		printk(KERN_WARNING "aac_read: fib allocation failed\n");
 		return -1;
 	}
@@ -2051,7 +2047,8 @@ static int aac_write(struct scsi_cmnd * scsicmd)
 	/*
 	 *	Allocate and initialize a Fib then setup a BlockWrite command
 	 */
-	if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
+	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+	if (!cmd_fibcontext) {
 		/* FIB temporarily unavailable,not catastrophic failure */
 
 		/* scsicmd->result = DID_ERROR << 16;
@@ -2285,7 +2282,7 @@ static int aac_start_stop(struct scsi_cmnd *scsicmd)
 	/*
 	 *	Allocate and initialize a Fib
 	 */
-	cmd_fibcontext = aac_fib_alloc(aac);
+	cmd_fibcontext = aac_fib_alloc_tag(aac, scsicmd);
 	if (!cmd_fibcontext)
 		return SCSI_MLQUEUE_HOST_BUSY;
 
@@ -3157,7 +3154,6 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
 	scsicmd->result |= le32_to_cpu(srbreply->scsi_status);
 
 	aac_fib_complete(fibptr);
-	aac_fib_free(fibptr);
 	scsicmd->scsi_done(scsicmd);
 }
 
@@ -3187,9 +3183,10 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
 	/*
 	 *	Allocate and initialize a Fib then setup a BlockWrite command
 	 */
-	if (!(cmd_fibcontext = aac_fib_alloc(dev))) {
+	cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);
+	if (!cmd_fibcontext)
 		return -1;
-	}
+
 	status = aac_adapter_scsi(cmd_fibcontext, scsicmd);
 
 	/*
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 074878b..f51f0a0 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2114,6 +2114,7 @@ int aac_acquire_irq(struct aac_dev *dev);
 void aac_free_irq(struct aac_dev *dev);
 const char *aac_driverinfo(struct Scsi_Host *);
 struct fib *aac_fib_alloc(struct aac_dev *dev);
+struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd);
 int aac_fib_setup(struct aac_dev *dev);
 void aac_fib_map_free(struct aac_dev *dev);
 void aac_fib_free(struct fib * context);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index a1f90fe..46a2a2f 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -137,6 +137,7 @@ int aac_fib_setup(struct aac_dev * dev)
 		i++, fibptr++)
 	{
 		fibptr->flags = 0;
+		fibptr->size = sizeof(struct fib);
 		fibptr->dev = dev;
 		fibptr->hw_fib_va = hw_fib;
 		fibptr->data = (void *) fibptr->hw_fib_va->data;
@@ -156,13 +157,38 @@ int aac_fib_setup(struct aac_dev * dev)
 	 */
 	dev->fibs[dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB - 1].next = NULL;
 	/*
-	 *	Enable this to debug out of queue space
-	 */
-	dev->free_fib = &dev->fibs[0];
+	*	Set 8 fibs aside for management tools
+	*/
+	dev->free_fib = &dev->fibs[dev->scsi_host_ptr->can_queue];
 	return 0;
 }
 
 /**
+ *	aac_fib_alloc_tag-allocate a fib using tags
+ *	@dev: Adapter to allocate the fib for
+ *
+ *	Allocate a fib from the adapter fib pool using tags
+ *	from the blk layer.
+ */
+
+struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd)
+{
+	struct fib *fibptr;
+
+	fibptr = &dev->fibs[scmd->request->tag];
+	/*
+	 *	Null out fields that depend on being zero at the start of
+	 *	each I/O
+	 */
+	fibptr->hw_fib_va->header.XferState = 0;
+	fibptr->type = FSAFS_NTC_FIB_CONTEXT;
+	fibptr->callback_data = NULL;
+	fibptr->callback = NULL;
+
+	return fibptr;
+}
+
+/**
  *	aac_fib_alloc	-	allocate a fib
  *	@dev: Adapter to allocate the fib for
  *
diff --git a/drivers/scsi/aacraid/dpcsup.c b/drivers/scsi/aacraid/dpcsup.c
index da9d993..d677b52 100644
--- a/drivers/scsi/aacraid/dpcsup.c
+++ b/drivers/scsi/aacraid/dpcsup.c
@@ -394,7 +394,6 @@ unsigned int aac_intr_normal(struct aac_dev *dev, u32 index,
 				fib->callback(fib->callback_data, fib);
 			} else {
 				aac_fib_complete(fib);
-				aac_fib_free(fib);
 			}
 		} else {
 			unsigned long flagv;
@@ -416,7 +415,6 @@ unsigned int aac_intr_normal(struct aac_dev *dev, u32 index,
 				fib->done = 0;
 				spin_unlock_irqrestore(&fib->event_lock, flagv);
 				aac_fib_complete(fib);
-				aac_fib_free(fib);
 			}
 
 		}
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 76eaa38..129a515 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -454,6 +454,8 @@ static int aac_slave_configure(struct scsi_device *sdev)
 	} else
 		scsi_change_queue_depth(sdev, 1);
 
+		sdev->tagged_supported = 1;
+
 	return 0;
 }
 
-- 
1.9.1

[PATCH V5 02/10] aacraid: Fix RRQ overload

[Raghava Aditya Renukunta]

From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>

The driver utilizes an array of atomic variables to keep track of
IO submissions to each vector. To submit an IO multiple threads
iterate through the array to find a vector which has empty slots
to send an IO. The reading and updating of the variable is not atomic,
causing race conditions when a thread uses a full vector to
submit an IO.

Fixed by mapping each FIB to a vector, the submission path then uses
said vector to submit IO thereby removing the possibly of a race
condition.The vector assignment is started from 1 since vector 0 is
reserved for the use of AIF management FIBS.If the number of MSIx
vectors is 1 (MSI or INTx mode) then all the fibs are allocated to
vector 0.

Changes in V2:
Created function aac_fib_vector_assign to assign vector numbers to
fib and to prevent code duplication

Changes in V3:
None

Changes in V4:
None

Changes in V5:
None

Fixes: 495c0217 "aacraid: MSI-x support"
Cc: stable@vger.kernel.org # v4.1

Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
---
 drivers/scsi/aacraid/aacraid.h |  2 ++
 drivers/scsi/aacraid/commsup.c | 28 ++++++++++++++++++++++++++++
 drivers/scsi/aacraid/src.c     | 30 +++++++-----------------------
 3 files changed, 37 insertions(+), 23 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index f51f0a0..fff1306 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -944,6 +944,7 @@ struct fib {
 	 */
 	struct list_head	fiblink;
 	void			*data;
+	u32			vector_no;
 	struct hw_fib		*hw_fib_va;		/* Actual shared object */
 	dma_addr_t		hw_fib_pa;		/* physical address of hw_fib*/
 };
@@ -2113,6 +2114,7 @@ static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
 int aac_acquire_irq(struct aac_dev *dev);
 void aac_free_irq(struct aac_dev *dev);
 const char *aac_driverinfo(struct Scsi_Host *);
+void aac_fib_vector_assign(struct aac_dev *dev);
 struct fib *aac_fib_alloc(struct aac_dev *dev);
 struct fib *aac_fib_alloc_tag(struct aac_dev *dev, struct scsi_cmnd *scmd);
 int aac_fib_setup(struct aac_dev *dev);
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 46a2a2f..07a42a3 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -90,6 +90,28 @@ void aac_fib_map_free(struct aac_dev *dev)
 	dev->hw_fib_pa = 0;
 }
 
+void aac_fib_vector_assign(struct aac_dev *dev)
+{
+	u32 i = 0;
+	u32 vector = 1;
+	struct fib *fibptr = NULL;
+
+	for (i = 0, fibptr = &dev->fibs[i];
+		i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
+		i++, fibptr++) {
+		if ((dev->max_msix == 1) ||
+		  (i > ((dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB - 1)
+			- dev->vector_cap))) {
+			fibptr->vector_no = 0;
+		} else {
+			fibptr->vector_no = vector;
+			vector++;
+			if (vector == dev->max_msix)
+				vector = 1;
+		}
+	}
+}
+
 /**
  *	aac_fib_setup	-	setup the fibs
  *	@dev: Adapter to set up
@@ -152,6 +174,12 @@ int aac_fib_setup(struct aac_dev * dev)
 		hw_fib_pa = hw_fib_pa +
 			dev->max_fib_size + sizeof(struct aac_fib_xporthdr);
 	}
+
+	/*
+	 *Assign vector numbers to fibs
+	 */
+	aac_fib_vector_assign(dev);
+
 	/*
 	 *	Add the fib chain to the free list
 	 */
diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c
index 2aa34ea..bc0203f 100644
--- a/drivers/scsi/aacraid/src.c
+++ b/drivers/scsi/aacraid/src.c
@@ -156,8 +156,8 @@ static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
 				break;
 			if (dev->msi_enabled && dev->max_msix > 1)
 				atomic_dec(&dev->rrq_outstanding[vector_no]);
-			aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
 			dev->host_rrq[index++] = 0;
+			aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
 			if (index == (vector_no + 1) * dev->vector_cap)
 				index = vector_no * dev->vector_cap;
 			dev->host_rrq_idx[vector_no] = index;
@@ -452,36 +452,20 @@ static int aac_src_deliver_message(struct fib *fib)
 #endif
 
 	u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
+	u16 vector_no;
 
 	atomic_inc(&q->numpending);
 
 	if (dev->msi_enabled && fib->hw_fib_va->header.Command != AifRequest &&
 	    dev->max_msix > 1) {
-		u_int16_t vector_no, first_choice = 0xffff;
-
-		vector_no = dev->fibs_pushed_no % dev->max_msix;
-		do {
-			vector_no += 1;
-			if (vector_no == dev->max_msix)
-				vector_no = 1;
-			if (atomic_read(&dev->rrq_outstanding[vector_no]) <
-			    dev->vector_cap)
-				break;
-			if (0xffff == first_choice)
-				first_choice = vector_no;
-			else if (vector_no == first_choice)
-				break;
-		} while (1);
-		if (vector_no == first_choice)
-			vector_no = 0;
-		atomic_inc(&dev->rrq_outstanding[vector_no]);
-		if (dev->fibs_pushed_no == 0xffffffff)
-			dev->fibs_pushed_no = 0;
-		else
-			dev->fibs_pushed_no++;
+		vector_no = fib->vector_no;
 		fib->hw_fib_va->header.Handle += (vector_no << 16);
+	} else {
+		vector_no = 0;
 	}
 
+	atomic_inc(&dev->rrq_outstanding[vector_no]);
+
 	if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
 		/* Calculate the amount to the fibsize bits */
 		fibsize = (hdr_size + 127) / 128 - 1;
-- 
1.9.1

[PATCH V5 03/10] aacraid: Added EEH support

[Raghava Aditya Renukunta]

From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>

Added support for PCI EEH(extended error handling).

Changes in V2:
Made local functions static
Removed call to  aac_fib_free_tag
Set adapter_shutdown flag when PCI error detected

Changes in V3:
None

Changes in V4:
Removed setting of adapter_shutdown flag when \
PCI error detected

Changes in V5:
Removed CONFIG_PM macro conditional compilation for \
aac_release_resources and aac_acquire_resources

Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
 drivers/scsi/aacraid/aacraid.h |   1 +
 drivers/scsi/aacraid/linit.c   | 140 ++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 140 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index fff1306..2916288 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1235,6 +1235,7 @@ struct aac_dev
 	struct msix_entry	msixentry[AAC_MAX_MSIX];
 	struct aac_msix_ctx	aac_msix[AAC_MAX_MSIX]; /* context */
 	u8			adapter_shutdown;
+	u32			handle_pci_error;
 };
 
 #define aac_adapter_interrupt(dev) \
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 129a515..822b695 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -38,6 +38,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
+#include <linux/aer.h>
 #include <linux/pci-aspm.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
@@ -1298,6 +1299,9 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_deinit;
 	scsi_scan_host(shost);
 
+	pci_enable_pcie_error_reporting(pdev);
+	pci_save_state(pdev);
+
 	return 0;
 
  out_deinit:
@@ -1319,7 +1323,6 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	return error;
 }
 
-#if (defined(CONFIG_PM))
 static void aac_release_resources(struct aac_dev *aac)
 {
 	int i;
@@ -1414,6 +1417,8 @@ error_iounmap:
 	return -1;
 
 }
+
+#if (defined(CONFIG_PM))
 static int aac_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 
@@ -1501,6 +1506,138 @@ static void aac_remove_one(struct pci_dev *pdev)
 	}
 }
 
+static void aac_flush_ios(struct aac_dev *aac)
+{
+	int i;
+	struct scsi_cmnd *cmd;
+
+	for (i = 0; i < aac->scsi_host_ptr->can_queue; i++) {
+		cmd = (struct scsi_cmnd *)aac->fibs[i].callback_data;
+		if (cmd && (cmd->SCp.phase == AAC_OWNER_FIRMWARE)) {
+			scsi_dma_unmap(cmd);
+
+			if (aac->handle_pci_error)
+				cmd->result = DID_NO_CONNECT << 16;
+			else
+				cmd->result = DID_RESET << 16;
+
+			cmd->scsi_done(cmd);
+		}
+	}
+}
+
+static pci_ers_result_t aac_pci_error_detected(struct pci_dev *pdev,
+					enum pci_channel_state error)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct aac_dev *aac = shost_priv(shost);
+
+	dev_err(&pdev->dev, "aacraid: PCI error detected %x\n", error);
+
+	switch (error) {
+	case pci_channel_io_normal:
+		return PCI_ERS_RESULT_CAN_RECOVER;
+	case pci_channel_io_frozen:
+		aac->handle_pci_error = 1;
+
+		scsi_block_requests(aac->scsi_host_ptr);
+		aac_flush_ios(aac);
+		aac_release_resources(aac);
+
+		pci_disable_pcie_error_reporting(pdev);
+		aac_adapter_ioremap(aac, 0);
+
+		return PCI_ERS_RESULT_NEED_RESET;
+	case pci_channel_io_perm_failure:
+		aac->handle_pci_error = 1;
+
+		aac_flush_ios(aac);
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t aac_pci_mmio_enabled(struct pci_dev *pdev)
+{
+	dev_err(&pdev->dev, "aacraid: PCI error - mmio enabled\n");
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t aac_pci_slot_reset(struct pci_dev *pdev)
+{
+	dev_err(&pdev->dev, "aacraid: PCI error - slot reset\n");
+	pci_restore_state(pdev);
+	if (pci_enable_device(pdev)) {
+		dev_warn(&pdev->dev,
+			"aacraid: failed to enable slave\n");
+		goto fail_device;
+	}
+
+	pci_set_master(pdev);
+
+	if (pci_enable_device_mem(pdev)) {
+		dev_err(&pdev->dev, "pci_enable_device_mem failed\n");
+		goto fail_device;
+	}
+
+	return PCI_ERS_RESULT_RECOVERED;
+
+fail_device:
+	dev_err(&pdev->dev, "aacraid: PCI error - slot reset failed\n");
+	return PCI_ERS_RESULT_DISCONNECT;
+}
+
+
+static void aac_pci_resume(struct pci_dev *pdev)
+{
+	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	struct scsi_device *sdev = NULL;
+	struct aac_dev *aac = (struct aac_dev *)shost_priv(shost);
+
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+
+	if (aac_adapter_ioremap(aac, aac->base_size)) {
+
+		dev_err(&pdev->dev, "aacraid: ioremap failed\n");
+		/* remap failed, go back ... */
+		aac->comm_interface = AAC_COMM_PRODUCER;
+		if (aac_adapter_ioremap(aac, AAC_MIN_FOOTPRINT_SIZE)) {
+			dev_warn(&pdev->dev,
+				"aacraid: unable to map adapter.\n");
+
+			return;
+		}
+	}
+
+	msleep(10000);
+
+	aac_acquire_resources(aac);
+
+	/*
+	 * reset this flag to unblock ioctl() as it was set
+	 * at aac_send_shutdown() to block ioctls from upperlayer
+	 */
+	aac->adapter_shutdown = 0;
+	aac->handle_pci_error = 0;
+
+	shost_for_each_device(sdev, shost)
+		if (sdev->sdev_state == SDEV_OFFLINE)
+			sdev->sdev_state = SDEV_RUNNING;
+	scsi_unblock_requests(aac->scsi_host_ptr);
+	scsi_scan_host(aac->scsi_host_ptr);
+	pci_save_state(pdev);
+
+	dev_err(&pdev->dev, "aacraid: PCI error - resume\n");
+}
+
+static struct pci_error_handlers aac_pci_err_handler = {
+	.error_detected		= aac_pci_error_detected,
+	.mmio_enabled		= aac_pci_mmio_enabled,
+	.slot_reset		= aac_pci_slot_reset,
+	.resume			= aac_pci_resume,
+};
+
 static struct pci_driver aac_pci_driver = {
 	.name		= AAC_DRIVERNAME,
 	.id_table	= aac_pci_tbl,
@@ -1511,6 +1648,7 @@ static struct pci_driver aac_pci_driver = {
 	.resume		= aac_resume,
 #endif
 	.shutdown	= aac_shutdown,
+	.err_handler    = &aac_pci_err_handler,
 };
 
 static int __init aac_init(void)
-- 
1.9.1

[PATCH V5 04/10] aacraid: Fix memory leak in aac_fib_map_free

[Raghava Aditya Renukunta]

From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>

aac_fib_map_free() calls pci_free_consistent() without checking that
dev->hw_fib_va is not NULL and dev->max_fib_size is not zero.If they
are indeed NULL/0, this will result in a hang as pci_free_consistent()
will attempt to invalidate cache for the entire 64-bit address space
(which would take a very long time).

Fixed by adding a check to make sure that dev->hw_fib_va and
dev->max_fib_size are not NULL and 0 respectively.

Changes in V2:
None

Changes in V3:
None

Changes in V4:
None

Changes in V5:
None

Fixes: 9ad5204d6 - "[SCSI]aacraid: incorrect dma mapping mask
during blinked recover or user initiated reset"
Cc: stable@vger.kernel.org

Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
---
 drivers/scsi/aacraid/commsup.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index 07a42a3..511bbc5 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -83,9 +83,12 @@ static int fib_map_alloc(struct aac_dev *dev)
 
 void aac_fib_map_free(struct aac_dev *dev)
 {
-	pci_free_consistent(dev->pdev,
-	  dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB),
-	  dev->hw_fib_va, dev->hw_fib_pa);
+	if (dev->hw_fib_va && dev->max_fib_size) {
+		pci_free_consistent(dev->pdev,
+		(dev->max_fib_size *
+		(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB)),
+		dev->hw_fib_va, dev->hw_fib_pa);
+	}
 	dev->hw_fib_va = NULL;
 	dev->hw_fib_pa = 0;
 }
-- 
1.9.1

[PATCH V5 05/10] aacraid: Set correct msix count for EEH recovery

[Raghava Aditya Renukunta]

From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>

During EEH recovery number of online CPU's might change thereby changing
the number of MSIx vectors. Since each fib is allocated to a vector,
changes in the number of vectors causes fib to be sent thru invalid
vectors.In addition the correct number of MSIx vectors is not
updated in the INIT struct sent to the controller, when it is
reinitialized.

Fixed by reassigning vectors to fibs based on the updated number of MSIx
vectors and updating the INIT structure before sending to controller.

Changes in V2:
Replaced fib vector allocation code with aac_fib_vector_assign

Changes in V3:
None

Changes in V4:
None

Changes in V5:
None

Fixes: MSI-X vector calculation for suspend/resume
Cc: stable@vger.kernel.org

Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Reviewed-by: Johannes Thumshirn <jthushirn@suse.de>
---
 drivers/scsi/aacraid/linit.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 822b695..5117220 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1409,8 +1409,18 @@ static int aac_acquire_resources(struct aac_dev *dev)
 
 	aac_adapter_enable_int(dev);
 
-	if (!dev->sync_mode)
+	/*max msix may change  after EEH
+	 * Re-assign vectors to fibs
+	 */
+	aac_fib_vector_assign(dev);
+
+	if (!dev->sync_mode) {
+		/* After EEH recovery or suspend resume, max_msix count
+		 * may change, therfore updating in init as well.
+		 */
 		aac_adapter_start(dev);
+		dev->init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix);
+	}
 	return 0;
 
 error_iounmap:
-- 
1.9.1

[PATCH V5 06/10] aacraid: Fundamental reset support for Series 7

[Raghava Aditya Renukunta]

From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>

Series 7 does not support PCI hot reset used by EEH.

Enabled fundamental reset only for Series 7

Changes in V2:
None

Changes in V3:
None

Changes in V4:
None

Changes in V5:
None

Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
---
 drivers/scsi/aacraid/linit.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 5117220..48e2a79 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1135,6 +1135,12 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	u64 dmamask;
 	extern int aac_sync_mode;
 
+	/*
+	 * Only series 7 needs freset.
+	 */
+	 if (pdev->device == PMC_DEVICE_S7)
+		pdev->needs_freset = 1;
+
 	list_for_each_entry(aac, &aac_devices, entry) {
 		if (aac->id > unique_id)
 			break;
-- 
1.9.1

[PATCH V5 07/10] aacraid: Created new mutex for ioctl path

[Raghava Aditya Renukunta]

aac_mutex was used to create protect the ioctl path for only the
compat path, it would be make more sense to place mutex in
aac_do_ioctl, which is the main ioctl function call that handles
all ioctl commands.

Created new mutex ioctl_mutex in struct aac_dev to protect switch
case in aac_do_ioctl and removed aac_mutex from aac_cfg_ioctl and
aac_compat_do_ioctl

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@pmcs.com>
---
 drivers/scsi/aacraid/aacraid.h  |  1 +
 drivers/scsi/aacraid/commctrl.c |  4 ++++
 drivers/scsi/aacraid/linit.c    | 12 ++----------
 3 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 2916288..75bc65e 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1124,6 +1124,7 @@ struct aac_dev
 	struct fib		*free_fib;
 	spinlock_t		fib_lock;
 
+	struct mutex		ioctl_mutex;
 	struct aac_queue_block *queues;
 	/*
 	 *	The user API will use an IOCTL to register itself to receive
diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
index 54195a1..4d5f4e7 100644
--- a/drivers/scsi/aacraid/commctrl.c
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -855,6 +855,8 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg)
 {
 	int status;
 
+	mutex_lock(&dev->ioctl_mutex);
+
 	/*
 	 *	HBA gets first crack
 	 */
@@ -890,6 +892,8 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg)
 		status = -ENOTTY;
 		break;
 	}
+	mutex_unlock(&dev->ioctl_mutex);
+
 	return status;
 }
 
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 48e2a79..5f08bcf 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -703,23 +703,15 @@ static int aac_cfg_open(struct inode *inode, struct file *file)
 static long aac_cfg_ioctl(struct file *file,
 		unsigned int cmd, unsigned long arg)
 {
-	int ret;
-	struct aac_dev *aac;
-	aac = (struct aac_dev *)file->private_data;
 	if (!capable(CAP_SYS_RAWIO) || aac->adapter_shutdown)
 		return -EPERM;
-	mutex_lock(&aac_mutex);
-	ret = aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
-	mutex_unlock(&aac_mutex);
-
-	return ret;
+	return aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
 }
 
 #ifdef CONFIG_COMPAT
 static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long arg)
 {
 	long ret;
-	mutex_lock(&aac_mutex);
 	switch (cmd) {
 	case FSACTL_MINIPORT_REV_CHECK:
 	case FSACTL_SENDFIB:
@@ -753,7 +745,6 @@ static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long
 		ret = -ENOIOCTLCMD;
 		break;
 	}
-	mutex_unlock(&aac_mutex);
 	return ret;
 }
 
@@ -1194,6 +1185,7 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_free_host;
 	spin_lock_init(&aac->fib_lock);
 
+	mutex_init(&aac->ioctl_mutex);
 	/*
 	 *	Map in the registers from the adapter.
 	 */
-- 
1.9.1

[PATCH V5 08/10] aacraid: Fix AIF triggered IOP_RESET

[Raghava Aditya Renukunta]

From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>

while driver removal is in progress or PCI shutdown is invoked, driver
kills AIF aacraid thread, but IOCTL requests from the management tools
re-start AIF thread leading to IOP_RESET.

Fixed by setting adapter_shutdown flag when PCI shutdown is invoked.

Changes in V2:
Set adapter_shutdown flag before shutdown command is sent to \
controller

Changes in V3:
Call aac_send_shut_shutdown first thing in __aac_shutdown
Convert adapter_shutdown to atomic_t variable to prevent \
SMP coherency issues(race conditions)

Changes in V4:
Used mutex to protect ioctl path and adapter_shutdown to prevent \
race conditions.

Changes in V5:
Moved replacement of aac_mutex with ioctl_mutex to previous patch

Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
---
 drivers/scsi/aacraid/commctrl.c | 3 +++
 drivers/scsi/aacraid/comminit.c | 6 ++++--
 drivers/scsi/aacraid/linit.c    | 5 +++--
 3 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
index 4d5f4e7..f6692d1 100644
--- a/drivers/scsi/aacraid/commctrl.c
+++ b/drivers/scsi/aacraid/commctrl.c
@@ -857,6 +857,9 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg)
 
 	mutex_lock(&dev->ioctl_mutex);
 
+	if (dev->adapter_shutdown)
+		return -EACCES;
+
 	/*
 	 *	HBA gets first crack
 	 */
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index 0e954e3..2b4e753 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -212,8 +212,11 @@ int aac_send_shutdown(struct aac_dev * dev)
 		return -ENOMEM;
 	aac_fib_init(fibctx);
 
-	cmd = (struct aac_close *) fib_data(fibctx);
+	mutex_lock(&dev->ioctl_mutex);
+	dev->adapter_shutdown = 1;
+	mutex_unlock(&dev->ioctl_mutex);
 
+	cmd = (struct aac_close *) fib_data(fibctx);
 	cmd->command = cpu_to_le32(VM_CloseAll);
 	cmd->cid = cpu_to_le32(0xfffffffe);
 
@@ -229,7 +232,6 @@ int aac_send_shutdown(struct aac_dev * dev)
 	/* FIB should be freed only after getting the response from the F/W */
 	if (status != -ERESTARTSYS)
 		aac_fib_free(fibctx);
-	dev->adapter_shutdown = 1;
 	if ((dev->pdev->device == PMC_DEVICE_S7 ||
 	     dev->pdev->device == PMC_DEVICE_S8 ||
 	     dev->pdev->device == PMC_DEVICE_S9) &&
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 5f08bcf..2c7405a 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -703,7 +703,7 @@ static int aac_cfg_open(struct inode *inode, struct file *file)
 static long aac_cfg_ioctl(struct file *file,
 		unsigned int cmd, unsigned long arg)
 {
-	if (!capable(CAP_SYS_RAWIO) || aac->adapter_shutdown)
+	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
 	return aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
 }
@@ -1069,6 +1069,8 @@ static void __aac_shutdown(struct aac_dev * aac)
 	int i;
 	int cpu;
 
+	aac_send_shutdown(aac);
+
 	if (aac->aif_thread) {
 		int i;
 		/* Clear out events first */
@@ -1080,7 +1082,6 @@ static void __aac_shutdown(struct aac_dev * aac)
 		}
 		kthread_stop(aac->thread);
 	}
-	aac_send_shutdown(aac);
 	aac_adapter_disable_int(aac);
 	cpu = cpumask_first(cpu_online_mask);
 	if (aac->pdev->device == PMC_DEVICE_S6 ||
-- 
1.9.1

[PATCH V5 09/10] aacraid: Fix character device re-initialization

[Raghava Aditya Renukunta]

From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>

During EEH PCI hotplug activity kernel unloads and loads the driver,
causing character device to be unregistered(aac_remove_one).When the
driver is loaded back using aac_probe_one the character device needs
to be registered again for the AIF management tools to work.

Fixed by adding code to register character device in aac_probe_one if
it is unregistered in aac_remove_one.

Changes in V2:
Added macros to track character device state

Changes in V3:
None

Changes in V4:
None

Changes in V5:
None

Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
 drivers/scsi/aacraid/aacraid.h |  7 +++++++
 drivers/scsi/aacraid/linit.c   | 21 ++++++++++++++-------
 2 files changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 75bc65e..9cdf4d2 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -94,6 +94,13 @@ enum {
 #define aac_phys_to_logical(x)  ((x)+1)
 #define aac_logical_to_phys(x)  ((x)?(x)-1:0)
 
+/*
+ * These macros are for keeping track of
+ * character device state.
+ */
+#define AAC_CHARDEV_UNREGISTERED	(-1)
+#define AAC_CHARDEV_NEEDS_REINIT	(-2)
+
 /* #define AAC_DETAILED_STATUS_INFO */
 
 struct diskparm
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 2c7405a..6a5d00f 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -80,7 +80,7 @@ MODULE_VERSION(AAC_DRIVER_FULL_VERSION);
 
 static DEFINE_MUTEX(aac_mutex);
 static LIST_HEAD(aac_devices);
-static int aac_cfg_major = -1;
+static int aac_cfg_major = AAC_CHARDEV_UNREGISTERED;
 char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;
 
 /*
@@ -1115,6 +1115,13 @@ static void __aac_shutdown(struct aac_dev * aac)
 	else if (aac->max_msix > 1)
 		pci_disable_msix(aac->pdev);
 }
+static void aac_init_char(void)
+{
+	aac_cfg_major = register_chrdev(0, "aac", &aac_cfg_fops);
+	if (aac_cfg_major < 0) {
+		pr_err("aacraid: unable to register \"aac\" device.\n");
+	}
+}
 
 static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
@@ -1172,6 +1179,9 @@ static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	shost->max_cmd_len = 16;
 	shost->use_cmd_list = 1;
 
+	if (aac_cfg_major == AAC_CHARDEV_NEEDS_REINIT)
+		aac_init_char();
+
 	aac = (struct aac_dev *)shost->hostdata;
 	aac->base_start = pci_resource_start(pdev, 0);
 	aac->scsi_host_ptr = shost;
@@ -1511,7 +1521,7 @@ static void aac_remove_one(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 	if (list_empty(&aac_devices)) {
 		unregister_chrdev(aac_cfg_major, "aac");
-		aac_cfg_major = -1;
+		aac_cfg_major = AAC_CHARDEV_NEEDS_REINIT;
 	}
 }
 
@@ -1671,11 +1681,8 @@ static int __init aac_init(void)
 	if (error < 0)
 		return error;
 
-	aac_cfg_major = register_chrdev( 0, "aac", &aac_cfg_fops);
-	if (aac_cfg_major < 0) {
-		printk(KERN_WARNING
-			"aacraid: unable to register \"aac\" device.\n");
-	}
+	aac_init_char();
+
 
 	return 0;
 }
-- 
1.9.1

[PATCH V5 10/10] aacraid: Update driver version

[Raghava Aditya Renukunta]

From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>

Updated diver version to 41052

Changes in V2:
None

Changes in V3:
None

Changes in V4:
None

Changes in V5:
None

Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
---
 drivers/scsi/aacraid/aacraid.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 9cdf4d2..efa493c 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -62,7 +62,7 @@ enum {
 #define	PMC_GLOBAL_INT_BIT0		0x00000001
 
 #ifndef AAC_DRIVER_BUILD
-# define AAC_DRIVER_BUILD 41010
+# define AAC_DRIVER_BUILD 41052
 # define AAC_DRIVER_BRANCH "-ms"
 #endif
 #define MAXIMUM_NUM_CONTAINERS	32
-- 
1.9.1

Re: [PATCH V5 07/10] aacraid: Created new mutex for ioctl path

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 2413 bytes --]

Hi Raghava,

[auto build test ERROR on scsi/for-next]
[also build test ERROR on v4.5-rc2 next-20160203]
[if your patch is applied to the wrong git tree, please drop us a note to help improving the system]

url:    https://github.com/0day-ci/linux/commits/Raghava-Aditya-Renukunta/aacraid-Patchset-for-aacraid-driver-version-41052/20160203-085108
base:   https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: x86_64-lkp (attached as .config)
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

Note: the linux-review/Raghava-Aditya-Renukunta/aacraid-Patchset-for-aacraid-driver-version-41052/20160203-085108 HEAD 6b0bf60a881075778b6548999d5bc8d04268996b builds fine.
      It only hurts bisectibility.

All errors (new ones prefixed by >>):

   drivers/scsi/aacraid/linit.c: In function 'aac_cfg_ioctl':
>> drivers/scsi/aacraid/linit.c:706:33: error: 'aac' undeclared (first use in this function)
     if (!capable(CAP_SYS_RAWIO) || aac->adapter_shutdown)
                                    ^
   drivers/scsi/aacraid/linit.c:706:33: note: each undeclared identifier is reported only once for each function it appears in

vim +/aac +706 drivers/scsi/aacraid/linit.c

^1da177e Linus Torvalds           2005-04-16  700   *	Bugs: Needs to handle hot plugging
^1da177e Linus Torvalds           2005-04-16  701   */
^1da177e Linus Torvalds           2005-04-16  702  
f4927c45 Arnd Bergmann            2010-04-27  703  static long aac_cfg_ioctl(struct file *file,
^1da177e Linus Torvalds           2005-04-16  704  		unsigned int cmd, unsigned long arg)
^1da177e Linus Torvalds           2005-04-16  705  {
f9c42596 Mahesh Rajashekhara      2015-03-26 @706  	if (!capable(CAP_SYS_RAWIO) || aac->adapter_shutdown)
60395bb6 Alan Cox                 2007-07-23  707  		return -EPERM;
99da1769 Raghava Aditya Renukunta 2016-02-02  708  	return aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
^1da177e Linus Torvalds           2005-04-16  709  }

:::::: The code at line 706 was first introduced by commit
:::::: f9c4259678cbde854a4e94398d66ef379178fd7c aacraid: IOCTL fix

:::::: TO: Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
:::::: CC: James Bottomley <JBottomley@Odin.com>

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 22410 bytes --]

Re: [PATCH V5 07/10] aacraid: Created new mutex for ioctl path

[Tomas Henzl]

On 3.2.2016 01:58, Raghava Aditya Renukunta wrote:
> aac_mutex was used to create protect the ioctl path for only the
> compat path, it would be make more sense to place mutex in
> aac_do_ioctl, which is the main ioctl function call that handles
> all ioctl commands.
>
> Created new mutex ioctl_mutex in struct aac_dev to protect switch
> case in aac_do_ioctl and removed aac_mutex from aac_cfg_ioctl and
> aac_compat_do_ioctl
>
> Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@pmcs.com>
> ---
>  drivers/scsi/aacraid/aacraid.h  |  1 +
>  drivers/scsi/aacraid/commctrl.c |  4 ++++
>  drivers/scsi/aacraid/linit.c    | 12 ++----------
>  3 files changed, 7 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
> index 2916288..75bc65e 100644
> --- a/drivers/scsi/aacraid/aacraid.h
> +++ b/drivers/scsi/aacraid/aacraid.h
> @@ -1124,6 +1124,7 @@ struct aac_dev
>  	struct fib		*free_fib;
>  	spinlock_t		fib_lock;
>  
> +	struct mutex		ioctl_mutex;
>  	struct aac_queue_block *queues;
>  	/*
>  	 *	The user API will use an IOCTL to register itself to receive
> diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
> index 54195a1..4d5f4e7 100644
> --- a/drivers/scsi/aacraid/commctrl.c
> +++ b/drivers/scsi/aacraid/commctrl.c
> @@ -855,6 +855,8 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg)
>  {
>  	int status;
>  
> +	mutex_lock(&dev->ioctl_mutex);
> +

       status = aac_dev_ioctl(dev, cmd, arg);
        if (status != -ENOTTY)
                return status;

That return^ needs a mutex unlock .
--tms

Re: [PATCH V5 08/10] aacraid: Fix AIF triggered IOP_RESET

[Tomas Henzl]

On 3.2.2016 01:58, Raghava Aditya Renukunta wrote:
> From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
>
> while driver removal is in progress or PCI shutdown is invoked, driver
> kills AIF aacraid thread, but IOCTL requests from the management tools
> re-start AIF thread leading to IOP_RESET.
>
> Fixed by setting adapter_shutdown flag when PCI shutdown is invoked.
>
> Changes in V2:
> Set adapter_shutdown flag before shutdown command is sent to \
> controller
>
> Changes in V3:
> Call aac_send_shut_shutdown first thing in __aac_shutdown
> Convert adapter_shutdown to atomic_t variable to prevent \
> SMP coherency issues(race conditions)
>
> Changes in V4:
> Used mutex to protect ioctl path and adapter_shutdown to prevent \
> race conditions.
>
> Changes in V5:
> Moved replacement of aac_mutex with ioctl_mutex to previous patch
>
> Signed-off-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
> Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
> Reviewed-by: Tomas Henzl <thenzl@redhat.com>
> ---
>  drivers/scsi/aacraid/commctrl.c | 3 +++
>  drivers/scsi/aacraid/comminit.c | 6 ++++--
>  drivers/scsi/aacraid/linit.c    | 5 +++--
>  3 files changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c
> index 4d5f4e7..f6692d1 100644
> --- a/drivers/scsi/aacraid/commctrl.c
> +++ b/drivers/scsi/aacraid/commctrl.c
> @@ -857,6 +857,9 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg)
>  
>  	mutex_lock(&dev->ioctl_mutex);
>  
> +	if (dev->adapter_shutdown)
> +		return -EACCES;

and here too - mutex_unlock please

-tm

> +
>  	/*
>  	 *	HBA gets first crack
>  	 */
> diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
> index 0e954e3..2b4e753 100644
> --- a/drivers/scsi/aacraid/comminit.c
> +++ b/drivers/scsi/aacraid/comminit.c
> @@ -212,8 +212,11 @@ int aac_send_shutdown(struct aac_dev * dev)
>  		return -ENOMEM;
>  	aac_fib_init(fibctx);
>  
> -	cmd = (struct aac_close *) fib_data(fibctx);
> +	mutex_lock(&dev->ioctl_mutex);
> +	dev->adapter_shutdown = 1;
> +	mutex_unlock(&dev->ioctl_mutex);
>  
> +	cmd = (struct aac_close *) fib_data(fibctx);
>  	cmd->command = cpu_to_le32(VM_CloseAll);
>  	cmd->cid = cpu_to_le32(0xfffffffe);
>  
> @@ -229,7 +232,6 @@ int aac_send_shutdown(struct aac_dev * dev)
>  	/* FIB should be freed only after getting the response from the F/W */
>  	if (status != -ERESTARTSYS)
>  		aac_fib_free(fibctx);
> -	dev->adapter_shutdown = 1;
>  	if ((dev->pdev->device == PMC_DEVICE_S7 ||
>  	     dev->pdev->device == PMC_DEVICE_S8 ||
>  	     dev->pdev->device == PMC_DEVICE_S9) &&
> diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
> index 5f08bcf..2c7405a 100644
> --- a/drivers/scsi/aacraid/linit.c
> +++ b/drivers/scsi/aacraid/linit.c
> @@ -703,7 +703,7 @@ static int aac_cfg_open(struct inode *inode, struct file *file)
>  static long aac_cfg_ioctl(struct file *file,
>  		unsigned int cmd, unsigned long arg)
>  {
> -	if (!capable(CAP_SYS_RAWIO) || aac->adapter_shutdown)
> +	if (!capable(CAP_SYS_RAWIO))
>  		return -EPERM;
>  	return aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
>  }
> @@ -1069,6 +1069,8 @@ static void __aac_shutdown(struct aac_dev * aac)
>  	int i;
>  	int cpu;
>  
> +	aac_send_shutdown(aac);
> +
>  	if (aac->aif_thread) {
>  		int i;
>  		/* Clear out events first */
> @@ -1080,7 +1082,6 @@ static void __aac_shutdown(struct aac_dev * aac)
>  		}
>  		kthread_stop(aac->thread);
>  	}
> -	aac_send_shutdown(aac);
>  	aac_adapter_disable_int(aac);
>  	cpu = cpumask_first(cpu_online_mask);
>  	if (aac->pdev->device == PMC_DEVICE_S6 ||

RE: [PATCH V5 07/10] aacraid: Created new mutex for ioctl path

[Raghava Aditya Renukunta]

> -----Original Message-----
> From: Tomas Henzl [mailto:thenzl@redhat.com]
> Sent: Wednesday, February 3, 2016 2:38 AM
> To: Raghava Aditya Renukunta; James.Bottomley@HansenPartnership.com;
> martin.petersen@oracle.com; linux-scsi@vger.kernel.org
> Cc: Mahesh Rajashekhara; Murthy Bhat; Gana Sridaran; aacraid@pmc-
> sierra.com; Scott Benesh; jthumshirn@suse.de; shane.seymour@hpe.com
> Subject: Re: [PATCH V5 07/10] aacraid: Created new mutex for ioctl path
> 
> On 3.2.2016 01:58, Raghava Aditya Renukunta wrote:
> > aac_mutex was used to create protect the ioctl path for only the
> > compat path, it would be make more sense to place mutex in
> > aac_do_ioctl, which is the main ioctl function call that handles
> > all ioctl commands.
> >
> > Created new mutex ioctl_mutex in struct aac_dev to protect switch
> > case in aac_do_ioctl and removed aac_mutex from aac_cfg_ioctl and
> > aac_compat_do_ioctl
> >
> > Signed-off-by: Raghava Aditya Renukunta
> <RaghavaAditya.Renukunta@pmcs.com>
> > ---
> >  drivers/scsi/aacraid/aacraid.h  |  1 +
> >  drivers/scsi/aacraid/commctrl.c |  4 ++++
> >  drivers/scsi/aacraid/linit.c    | 12 ++----------
> >  3 files changed, 7 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
> > index 2916288..75bc65e 100644
> > --- a/drivers/scsi/aacraid/aacraid.h
> > +++ b/drivers/scsi/aacraid/aacraid.h
> > @@ -1124,6 +1124,7 @@ struct aac_dev
> >  	struct fib		*free_fib;
> >  	spinlock_t		fib_lock;
> >
> > +	struct mutex		ioctl_mutex;
> >  	struct aac_queue_block *queues;
> >  	/*
> >  	 *	The user API will use an IOCTL to register itself to receive
> > diff --git a/drivers/scsi/aacraid/commctrl.c
> b/drivers/scsi/aacraid/commctrl.c
> > index 54195a1..4d5f4e7 100644
> > --- a/drivers/scsi/aacraid/commctrl.c
> > +++ b/drivers/scsi/aacraid/commctrl.c
> > @@ -855,6 +855,8 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void
> __user *arg)
> >  {
> >  	int status;
> >
> > +	mutex_lock(&dev->ioctl_mutex);
> > +
> 
>        status = aac_dev_ioctl(dev, cmd, arg);
>         if (status != -ENOTTY)
>                 return status;
> 
> That return^ needs a mutex unlock .
> --tms

Will do

Regards,
Raghava Aditya

RE: [PATCH V5 08/10] aacraid: Fix AIF triggered IOP_RESET

[Raghava Aditya Renukunta]

Hello Tomas,

> -----Original Message-----
> From: Tomas Henzl [mailto:thenzl@redhat.com]
> Sent: Wednesday, February 3, 2016 2:55 AM
> To: Raghava Aditya Renukunta; James.Bottomley@HansenPartnership.com;
> martin.petersen@oracle.com; linux-scsi@vger.kernel.org
> Cc: Mahesh Rajashekhara; Murthy Bhat; Gana Sridaran; aacraid@pmc-
> sierra.com; Scott Benesh; jthumshirn@suse.de; shane.seymour@hpe.com
> Subject: Re: [PATCH V5 08/10] aacraid: Fix AIF triggered IOP_RESET
> 
> On 3.2.2016 01:58, Raghava Aditya Renukunta wrote:
> > From: Raghava Aditya Renukunta <raghavaaditya.renukunta@pmcs.com>
> >
> > while driver removal is in progress or PCI shutdown is invoked, driver
> > kills AIF aacraid thread, but IOCTL requests from the management tools
> > re-start AIF thread leading to IOP_RESET.
> >
> > Fixed by setting adapter_shutdown flag when PCI shutdown is invoked.
> >
> > Changes in V2:
> > Set adapter_shutdown flag before shutdown command is sent to \
> > controller
> >
> > Changes in V3:
> > Call aac_send_shut_shutdown first thing in __aac_shutdown
> > Convert adapter_shutdown to atomic_t variable to prevent \
> > SMP coherency issues(race conditions)
> >
> > Changes in V4:
> > Used mutex to protect ioctl path and adapter_shutdown to prevent \
> > race conditions.
> >
> > Changes in V5:
> > Moved replacement of aac_mutex with ioctl_mutex to previous patch
> >
> > Signed-off-by: Raghava Aditya Renukunta
> <raghavaaditya.renukunta@pmcs.com>
> > Reviewed-by: Shane Seymour <shane.seymour@hpe.com>
> > Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
> > Reviewed-by: Tomas Henzl <thenzl@redhat.com>
> > ---
> >  drivers/scsi/aacraid/commctrl.c | 3 +++
> >  drivers/scsi/aacraid/comminit.c | 6 ++++--
> >  drivers/scsi/aacraid/linit.c    | 5 +++--
> >  3 files changed, 10 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/scsi/aacraid/commctrl.c
> b/drivers/scsi/aacraid/commctrl.c
> > index 4d5f4e7..f6692d1 100644
> > --- a/drivers/scsi/aacraid/commctrl.c
> > +++ b/drivers/scsi/aacraid/commctrl.c
> > @@ -857,6 +857,9 @@ int aac_do_ioctl(struct aac_dev * dev, int cmd, void
> __user *arg)
> >
> >  	mutex_lock(&dev->ioctl_mutex);
> >
> > +	if (dev->adapter_shutdown)
> > +		return -EACCES;
> 
> and here too - mutex_unlock please
> 
> -tm

Will do.

Regards,
Raghava Aditya
> 
> > +
> >  	/*
> >  	 *	HBA gets first crack
> >  	 */
> > diff --git a/drivers/scsi/aacraid/comminit.c
> b/drivers/scsi/aacraid/comminit.c
> > index 0e954e3..2b4e753 100644
> > --- a/drivers/scsi/aacraid/comminit.c
> > +++ b/drivers/scsi/aacraid/comminit.c
> > @@ -212,8 +212,11 @@ int aac_send_shutdown(struct aac_dev * dev)
> >  		return -ENOMEM;
> >  	aac_fib_init(fibctx);
> >
> > -	cmd = (struct aac_close *) fib_data(fibctx);
> > +	mutex_lock(&dev->ioctl_mutex);
> > +	dev->adapter_shutdown = 1;
> > +	mutex_unlock(&dev->ioctl_mutex);
> >
> > +	cmd = (struct aac_close *) fib_data(fibctx);
> >  	cmd->command = cpu_to_le32(VM_CloseAll);
> >  	cmd->cid = cpu_to_le32(0xfffffffe);
> >
> > @@ -229,7 +232,6 @@ int aac_send_shutdown(struct aac_dev * dev)
> >  	/* FIB should be freed only after getting the response from the F/W
> */
> >  	if (status != -ERESTARTSYS)
> >  		aac_fib_free(fibctx);
> > -	dev->adapter_shutdown = 1;
> >  	if ((dev->pdev->device == PMC_DEVICE_S7 ||
> >  	     dev->pdev->device == PMC_DEVICE_S8 ||
> >  	     dev->pdev->device == PMC_DEVICE_S9) &&
> > diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
> > index 5f08bcf..2c7405a 100644
> > --- a/drivers/scsi/aacraid/linit.c
> > +++ b/drivers/scsi/aacraid/linit.c
> > @@ -703,7 +703,7 @@ static int aac_cfg_open(struct inode *inode, struct
> file *file)
> >  static long aac_cfg_ioctl(struct file *file,
> >  		unsigned int cmd, unsigned long arg)
> >  {
> > -	if (!capable(CAP_SYS_RAWIO) || aac->adapter_shutdown)
> > +	if (!capable(CAP_SYS_RAWIO))
> >  		return -EPERM;
> >  	return aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
> >  }
> > @@ -1069,6 +1069,8 @@ static void __aac_shutdown(struct aac_dev * aac)
> >  	int i;
> >  	int cpu;
> >
> > +	aac_send_shutdown(aac);
> > +
> >  	if (aac->aif_thread) {
> >  		int i;
> >  		/* Clear out events first */
> > @@ -1080,7 +1082,6 @@ static void __aac_shutdown(struct aac_dev * aac)
> >  		}
> >  		kthread_stop(aac->thread);
> >  	}
> > -	aac_send_shutdown(aac);
> >  	aac_adapter_disable_int(aac);
> >  	cpu = cpumask_first(cpu_online_mask);
> >  	if (aac->pdev->device == PMC_DEVICE_S6 ||