[PATCH v6 0/3] Add support for the TI TPS65086 PMIC

[PATCH v6 0/3] Add support for the TI TPS65086 PMIC

[Andrew F. Davis]

This series adds support for the TPS65086 PMIC. It is a MFD with an I2C
interface, several regulators and load switches, and a GPO controller.

v1 can be found here: [1] v2: [2] v3: [3] v4: [4] v5: [5]

Changes from v5:
 - Now complies with gpiolib changes
 - Rebase on v4.5-rc1

Changes from v4:
 - Typo fixes in bindings
 - Regulator driver is now just an update stub
 - Use .parent in GPIO driver

Changes from v3:
 - Removed compatible strings from DT sub-nodes
 - Rearranged DT bindings
 - Small fixes

Changes from v2:
 - Use DT match callback in regulator
 - Typo fixes

Changes from v1:
 - Split up DT Docs into separate patches
 - Use mfd core to instantiate sub-devices
 - Several small fixes as discussed in v1 thread

[1] http://www.spinics.net/lists/devicetree/msg98403.html
[2] http://www.spinics.net/lists/kernel/msg2111345.html
[3] https://lkml.org/lkml/2015/11/4/393
[4] http://www.spinics.net/lists/devicetree/msg103186.html
[5] https://lkml.org/lkml/2015/12/1/576

Andrew F. Davis (3):
  Documentation: tps65086: Add DT bindings for the TPS65086 PMIC
  mfd: tps65086: Add driver for the TPS65086 PMIC
  gpio: tps65086: Add GPO driver for the TPS65086 PMIC

 Documentation/devicetree/bindings/mfd/tps65086.txt |  55 ++++++++
 drivers/gpio/Kconfig                               |   6 +
 drivers/gpio/Makefile                              |   1 +
 drivers/gpio/gpio-tps65086.c                       | 144 ++++++++++++++++++++
 drivers/mfd/Kconfig                                |  13 ++
 drivers/mfd/Makefile                               |   1 +
 drivers/mfd/tps65086.c                             | 149 +++++++++++++++++++++
 include/linux/mfd/tps65086.h                       | 117 ++++++++++++++++
 8 files changed, 486 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt
 create mode 100644 drivers/gpio/gpio-tps65086.c
 create mode 100644 drivers/mfd/tps65086.c
 create mode 100644 include/linux/mfd/tps65086.h

-- 
2.7.0

[PATCH v6 0/3] Add support for the TI TPS65086 PMIC

[Andrew F. Davis]

This series adds support for the TPS65086 PMIC. It is a MFD with an I2C
interface, several regulators and load switches, and a GPO controller.

v1 can be found here: [1] v2: [2] v3: [3] v4: [4] v5: [5]

Changes from v5:
 - Now complies with gpiolib changes
 - Rebase on v4.5-rc1

Changes from v4:
 - Typo fixes in bindings
 - Regulator driver is now just an update stub
 - Use .parent in GPIO driver

Changes from v3:
 - Removed compatible strings from DT sub-nodes
 - Rearranged DT bindings
 - Small fixes

Changes from v2:
 - Use DT match callback in regulator
 - Typo fixes

Changes from v1:
 - Split up DT Docs into separate patches
 - Use mfd core to instantiate sub-devices
 - Several small fixes as discussed in v1 thread

[1] http://www.spinics.net/lists/devicetree/msg98403.html
[2] http://www.spinics.net/lists/kernel/msg2111345.html
[3] https://lkml.org/lkml/2015/11/4/393
[4] http://www.spinics.net/lists/devicetree/msg103186.html
[5] https://lkml.org/lkml/2015/12/1/576

Andrew F. Davis (3):
  Documentation: tps65086: Add DT bindings for the TPS65086 PMIC
  mfd: tps65086: Add driver for the TPS65086 PMIC
  gpio: tps65086: Add GPO driver for the TPS65086 PMIC

 Documentation/devicetree/bindings/mfd/tps65086.txt |  55 ++++++++
 drivers/gpio/Kconfig                               |   6 +
 drivers/gpio/Makefile                              |   1 +
 drivers/gpio/gpio-tps65086.c                       | 144 ++++++++++++++++++++
 drivers/mfd/Kconfig                                |  13 ++
 drivers/mfd/Makefile                               |   1 +
 drivers/mfd/tps65086.c                             | 149 +++++++++++++++++++++
 include/linux/mfd/tps65086.h                       | 117 ++++++++++++++++
 8 files changed, 486 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt
 create mode 100644 drivers/gpio/gpio-tps65086.c
 create mode 100644 drivers/mfd/tps65086.c
 create mode 100644 include/linux/mfd/tps65086.h

-- 
2.7.0

[PATCH v6 1/3] Documentation: tps65086: Add DT bindings for the TPS65086 PMIC

[Andrew F. Davis]

The TPS65086 PMIC contains several regulators and a GPO controller.
Add bindings for the TPS65086 PMIC.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/mfd/tps65086.txt | 55 ++++++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
new file mode 100644
index 0000000..d370561
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
@@ -0,0 +1,55 @@
+* TPS65086 Power Management Integrated Circuit (PMIC) bindings
+
+Required properties:
+ - compatible		: Should be "ti,tps65086".
+ - reg			: I2C slave address.
+ - interrupt-parent	: Phandle to the parent interrupt controller.
+ - interrupts		: The interrupt line the device is connected to.
+ - interrupt-controller	: Marks the device node as an interrupt controller.
+ - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
+			    The first cell is the IRQ number.
+			    The second cell is the flags, encoded as trigger
+			    masks from ../interrupt-controller/interrupts.txt.
+ - gpio-controller      : Marks the device node as a GPIO Controller.
+ - #gpio-cells          : Should be two.  The first cell is the pin number and
+                            the second cell is used to specify flags.
+                            See ../gpio/gpio.txt for more information.
+ - regulators:          : List of child nodes that specify the regulator
+                            initialization data. Child nodes must be named
+                            after their hardware counterparts: buck[1-6],
+                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
+                            node is defined using the standard binding for
+                            regulators and the optional regulator properties
+                            defined below.
+
+Optional regulator properties:
+ - ti,regulator-step-size-25mv	: This is applicable for buck[1,2,6], set this
+				    if the regulator is factory set with a 25mv
+				    step voltage mapping.
+ - ti,regulator-decay		: This is applicable for buck[1-6], set this if
+				    the output needs to decay, default is for
+				    the output to slew down.
+
+Example:
+
+	pmic: tps65086@5e {
+		compatible = "ti,tps65086";
+		reg = <0x5e>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+			buck1 {
+				regulator-name = "vcc1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1600000>;
+				regulator-boot-on;
+				ti,regulator-decay;
+				ti,regulator-step-size-25mv;
+			};
+		};
+	};
-- 
2.7.0

[PATCH v6 1/3] Documentation: tps65086: Add DT bindings for the TPS65086 PMIC

[Andrew F. Davis]

The TPS65086 PMIC contains several regulators and a GPO controller.
Add bindings for the TPS65086 PMIC.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/mfd/tps65086.txt | 55 ++++++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
new file mode 100644
index 0000000..d370561
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
@@ -0,0 +1,55 @@
+* TPS65086 Power Management Integrated Circuit (PMIC) bindings
+
+Required properties:
+ - compatible		: Should be "ti,tps65086".
+ - reg			: I2C slave address.
+ - interrupt-parent	: Phandle to the parent interrupt controller.
+ - interrupts		: The interrupt line the device is connected to.
+ - interrupt-controller	: Marks the device node as an interrupt controller.
+ - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
+			    The first cell is the IRQ number.
+			    The second cell is the flags, encoded as trigger
+			    masks from ../interrupt-controller/interrupts.txt.
+ - gpio-controller      : Marks the device node as a GPIO Controller.
+ - #gpio-cells          : Should be two.  The first cell is the pin number and
+                            the second cell is used to specify flags.
+                            See ../gpio/gpio.txt for more information.
+ - regulators:          : List of child nodes that specify the regulator
+                            initialization data. Child nodes must be named
+                            after their hardware counterparts: buck[1-6],
+                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
+                            node is defined using the standard binding for
+                            regulators and the optional regulator properties
+                            defined below.
+
+Optional regulator properties:
+ - ti,regulator-step-size-25mv	: This is applicable for buck[1,2,6], set this
+				    if the regulator is factory set with a 25mv
+				    step voltage mapping.
+ - ti,regulator-decay		: This is applicable for buck[1-6], set this if
+				    the output needs to decay, default is for
+				    the output to slew down.
+
+Example:
+
+	pmic: tps65086@5e {
+		compatible = "ti,tps65086";
+		reg = <0x5e>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+			buck1 {
+				regulator-name = "vcc1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1600000>;
+				regulator-boot-on;
+				ti,regulator-decay;
+				ti,regulator-step-size-25mv;
+			};
+		};
+	};
-- 
2.7.0

[PATCH v6 2/3] mfd: tps65086: Add driver for the TPS65086 PMIC

[Andrew F. Davis]

Add support for the TPS65912 device. It provides communication
through I2C and contains the following components:

 - Regulators
 - Load switches
 - GPO controller

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/Kconfig          |  13 ++++
 drivers/mfd/Makefile         |   1 +
 drivers/mfd/tps65086.c       | 149 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/tps65086.h | 117 +++++++++++++++++++++++++++++++++
 4 files changed, 280 insertions(+)
 create mode 100644 drivers/mfd/tps65086.c
 create mode 100644 include/linux/mfd/tps65086.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ca66de..fe6d62b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1106,6 +1106,19 @@ config TPS6507X
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps6507x.
 
+config MFD_TPS65086
+	tristate "TI TPS65086 Power Management Integrated Chips (PMICs)"
+	select REGMAP
+	select REGMAP_IRQ
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  If you say yes here you get support for the TPS65086 series of
+	  Power Management chips.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config TPS65911_COMPARATOR
 	tristate
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..06801aa 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
+obj-$(CONFIG_MFD_TPS65086)	+= tps65086.o
 obj-$(CONFIG_MFD_TPS65217)	+= tps65217.o
 obj-$(CONFIG_MFD_TPS65218)	+= tps65218.o
 obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o
diff --git a/drivers/mfd/tps65086.c b/drivers/mfd/tps65086.c
new file mode 100644
index 0000000..43119a6
--- /dev/null
+++ b/drivers/mfd/tps65086.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+
+#include <linux/mfd/tps65086.h>
+
+static const struct mfd_cell tps65086_cells[] = {
+	{ .name = "tps65086-regulator", },
+	{ .name = "tps65086-gpio", },
+};
+
+static const struct regmap_range tps65086_yes_ranges[] = {
+	regmap_reg_range(TPS65086_IRQ, TPS65086_IRQ),
+	regmap_reg_range(TPS65086_PMICSTAT, TPS65086_SHUTDNSRC),
+	regmap_reg_range(TPS65086_GPOCTRL, TPS65086_GPOCTRL),
+	regmap_reg_range(TPS65086_PG_STATUS1, TPS65086_OC_STATUS),
+};
+
+static const struct regmap_access_table tps65086_volatile_table = {
+	.yes_ranges = tps65086_yes_ranges,
+	.n_yes_ranges = ARRAY_SIZE(tps65086_yes_ranges),
+};
+
+static const struct regmap_config tps65086_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_table = &tps65086_volatile_table,
+};
+
+static const struct regmap_irq tps65086_irqs[] = {
+	REGMAP_IRQ_REG(TPS65086_IRQ_DIETEMP, 0, TPS65086_IRQ_DIETEMP_MASK),
+	REGMAP_IRQ_REG(TPS65086_IRQ_SHUTDN, 0, TPS65086_IRQ_SHUTDN_MASK),
+	REGMAP_IRQ_REG(TPS65086_IRQ_FAULT, 0, TPS65086_IRQ_FAULT_MASK),
+};
+
+static struct regmap_irq_chip tps65086_irq_chip = {
+	.name = "tps65086",
+	.status_base = TPS65086_IRQ,
+	.mask_base = TPS65086_IRQ_MASK,
+	.ack_base = TPS65086_IRQ,
+	.init_ack_masked = true,
+	.num_regs = 1,
+	.irqs = tps65086_irqs,
+	.num_irqs = ARRAY_SIZE(tps65086_irqs),
+};
+
+static const struct of_device_id tps65086_of_match_table[] = {
+	{ .compatible = "ti,tps65086", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tps65086_of_match_table);
+
+static int tps65086_probe(struct i2c_client *client,
+			  const struct i2c_device_id *ids)
+{
+	struct tps65086 *tps;
+	unsigned int version;
+	int ret;
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, tps);
+	tps->dev = &client->dev;
+	tps->irq = client->irq;
+
+	tps->regmap = devm_regmap_init_i2c(client, &tps65086_regmap_config);
+	if (IS_ERR(tps->regmap)) {
+		dev_err(tps->dev, "Failed to initialize register map\n");
+		return PTR_ERR(tps->regmap);
+	}
+
+	ret = regmap_read(tps->regmap, TPS65086_DEVICEID, &version);
+	if (ret) {
+		dev_err(tps->dev, "Failed to read revision register\n");
+		return ret;
+	}
+
+	dev_info(tps->dev, "Device: TPS65086%01lX, OTP: %c, Rev: %ld\n",
+		 (version & TPS65086_DEVICEID_PART_MASK),
+		 (char)((version & TPS65086_DEVICEID_OTP_MASK) >> 4) + 'A',
+		 (version & TPS65086_DEVICEID_REV_MASK) >> 6);
+
+	ret = regmap_add_irq_chip(tps->regmap, tps->irq, IRQF_ONESHOT, 0,
+				  &tps65086_irq_chip, &tps->irq_data);
+	if (ret) {
+		dev_err(tps->dev, "Failed to register IRQ chip\n");
+		return ret;
+	}
+
+	ret = mfd_add_devices(tps->dev, PLATFORM_DEVID_AUTO, tps65086_cells,
+			      ARRAY_SIZE(tps65086_cells), NULL, 0,
+			      regmap_irq_get_domain(tps->irq_data));
+	if (ret) {
+		regmap_del_irq_chip(tps->irq, tps->irq_data);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tps65086_remove(struct i2c_client *client)
+{
+	struct tps65086 *tps = i2c_get_clientdata(client);
+
+	regmap_del_irq_chip(tps->irq, tps->irq_data);
+
+	return 0;
+}
+
+static const struct i2c_device_id tps65086_id_table[] = {
+	{ "tps65086", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, tps65086_id_table);
+
+static struct i2c_driver tps65086_driver = {
+	.driver		= {
+		.name	= "tps65086",
+		.of_match_table = tps65086_of_match_table,
+	},
+	.probe		= tps65086_probe,
+	.remove		= tps65086_remove,
+	.id_table       = tps65086_id_table,
+};
+module_i2c_driver(tps65086_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65086 PMIC Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/tps65086.h b/include/linux/mfd/tps65086.h
new file mode 100644
index 0000000..a228ae4
--- /dev/null
+++ b/include/linux/mfd/tps65086.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#ifndef __LINUX_MFD_TPS65086_H
+#define __LINUX_MFD_TPS65086_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+/* List of registers for TPS65086 */
+#define TPS65086_DEVICEID		0x01
+#define TPS65086_IRQ			0x02
+#define TPS65086_IRQ_MASK		0x03
+#define TPS65086_PMICSTAT		0x04
+#define TPS65086_SHUTDNSRC		0x05
+#define TPS65086_BUCK1CTRL		0x20
+#define TPS65086_BUCK2CTRL		0x21
+#define TPS65086_BUCK3DECAY		0x22
+#define TPS65086_BUCK3VID		0x23
+#define TPS65086_BUCK3SLPCTRL		0x24
+#define TPS65086_BUCK4CTRL		0x25
+#define TPS65086_BUCK5CTRL		0x26
+#define TPS65086_BUCK6CTRL		0x27
+#define TPS65086_LDOA2CTRL		0x28
+#define TPS65086_LDOA3CTRL		0x29
+#define TPS65086_DISCHCTRL1		0x40
+#define TPS65086_DISCHCTRL2		0x41
+#define TPS65086_DISCHCTRL3		0x42
+#define TPS65086_PG_DELAY1		0x43
+#define TPS65086_FORCESHUTDN		0x91
+#define TPS65086_BUCK1SLPCTRL		0x92
+#define TPS65086_BUCK2SLPCTRL		0x93
+#define TPS65086_BUCK4VID		0x94
+#define TPS65086_BUCK4SLPVID		0x95
+#define TPS65086_BUCK5VID		0x96
+#define TPS65086_BUCK5SLPVID		0x97
+#define TPS65086_BUCK6VID		0x98
+#define TPS65086_BUCK6SLPVID		0x99
+#define TPS65086_LDOA2VID		0x9A
+#define TPS65086_LDOA3VID		0x9B
+#define TPS65086_BUCK123CTRL		0x9C
+#define TPS65086_PG_DELAY2		0x9D
+#define TPS65086_PIN_EN_MASK1		0x9E
+#define TPS65086_PIN_EN_MASK2		0x9F
+#define TPS65086_SWVTT_EN		0x9F
+#define TPS65086_PIN_EN_OVR1		0xA0
+#define TPS65086_PIN_EN_OVR2		0xA1
+#define TPS65086_GPOCTRL		0xA1
+#define TPS65086_PWR_FAULT_MASK1	0xA2
+#define TPS65086_PWR_FAULT_MASK2	0xA3
+#define TPS65086_GPO1PG_CTRL1		0xA4
+#define TPS65086_GPO1PG_CTRL2		0xA5
+#define TPS65086_GPO4PG_CTRL1		0xA6
+#define TPS65086_GPO4PG_CTRL2		0xA7
+#define TPS65086_GPO2PG_CTRL1		0xA8
+#define TPS65086_GPO2PG_CTRL2		0xA9
+#define TPS65086_GPO3PG_CTRL1		0xAA
+#define TPS65086_GPO3PG_CTRL2		0xAB
+#define TPS65086_LDOA1CTRL		0xAE
+#define TPS65086_PG_STATUS1		0xB0
+#define TPS65086_PG_STATUS2		0xB1
+#define TPS65086_PWR_FAULT_STATUS1	0xB2
+#define TPS65086_PWR_FAULT_STATUS2	0xB3
+#define TPS65086_TEMPCRIT		0xB4
+#define TPS65086_TEMPHOT		0xB5
+#define TPS65086_OC_STATUS		0xB6
+
+/* IRQ Register field definitions */
+#define TPS65086_IRQ_DIETEMP_MASK	BIT(0)
+#define TPS65086_IRQ_SHUTDN_MASK	BIT(3)
+#define TPS65086_IRQ_FAULT_MASK		BIT(7)
+
+/* DEVICEID Register field definitions */
+#define TPS65086_DEVICEID_PART_MASK	GENMASK(3, 0)
+#define TPS65086_DEVICEID_OTP_MASK	GENMASK(5, 4)
+#define TPS65086_DEVICEID_REV_MASK	GENMASK(7, 6)
+
+/* VID Masks */
+#define BUCK_VID_MASK			GENMASK(7, 1)
+#define VDOA1_VID_MASK			GENMASK(4, 1)
+#define VDOA23_VID_MASK			GENMASK(3, 0)
+
+/* Define the TPS65086 IRQ numbers */
+enum tps65086_irqs {
+	TPS65086_IRQ_DIETEMP,
+	TPS65086_IRQ_SHUTDN,
+	TPS65086_IRQ_FAULT,
+};
+
+/**
+ * struct tps65086 - state holder for the tps65086 driver
+ *
+ * Device data may be used to access the TPS65086 chip
+ */
+struct tps65086 {
+	struct device *dev;
+	struct regmap *regmap;
+
+	/* IRQ Data */
+	int irq;
+	struct regmap_irq_chip_data *irq_data;
+};
+
+#endif /* __LINUX_MFD_TPS65086_H */
-- 
2.7.0

[PATCH v6 2/3] mfd: tps65086: Add driver for the TPS65086 PMIC

[Andrew F. Davis]

Add support for the TPS65912 device. It provides communication
through I2C and contains the following components:

 - Regulators
 - Load switches
 - GPO controller

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/Kconfig          |  13 ++++
 drivers/mfd/Makefile         |   1 +
 drivers/mfd/tps65086.c       | 149 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/tps65086.h | 117 +++++++++++++++++++++++++++++++++
 4 files changed, 280 insertions(+)
 create mode 100644 drivers/mfd/tps65086.c
 create mode 100644 include/linux/mfd/tps65086.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 9ca66de..fe6d62b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1106,6 +1106,19 @@ config TPS6507X
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps6507x.
 
+config MFD_TPS65086
+	tristate "TI TPS65086 Power Management Integrated Chips (PMICs)"
+	select REGMAP
+	select REGMAP_IRQ
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  If you say yes here you get support for the TPS65086 series of
+	  Power Management chips.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config TPS65911_COMPARATOR
 	tristate
 
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0f230a6..06801aa 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
+obj-$(CONFIG_MFD_TPS65086)	+= tps65086.o
 obj-$(CONFIG_MFD_TPS65217)	+= tps65217.o
 obj-$(CONFIG_MFD_TPS65218)	+= tps65218.o
 obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o
diff --git a/drivers/mfd/tps65086.c b/drivers/mfd/tps65086.c
new file mode 100644
index 0000000..43119a6
--- /dev/null
+++ b/drivers/mfd/tps65086.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+
+#include <linux/mfd/tps65086.h>
+
+static const struct mfd_cell tps65086_cells[] = {
+	{ .name = "tps65086-regulator", },
+	{ .name = "tps65086-gpio", },
+};
+
+static const struct regmap_range tps65086_yes_ranges[] = {
+	regmap_reg_range(TPS65086_IRQ, TPS65086_IRQ),
+	regmap_reg_range(TPS65086_PMICSTAT, TPS65086_SHUTDNSRC),
+	regmap_reg_range(TPS65086_GPOCTRL, TPS65086_GPOCTRL),
+	regmap_reg_range(TPS65086_PG_STATUS1, TPS65086_OC_STATUS),
+};
+
+static const struct regmap_access_table tps65086_volatile_table = {
+	.yes_ranges = tps65086_yes_ranges,
+	.n_yes_ranges = ARRAY_SIZE(tps65086_yes_ranges),
+};
+
+static const struct regmap_config tps65086_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_table = &tps65086_volatile_table,
+};
+
+static const struct regmap_irq tps65086_irqs[] = {
+	REGMAP_IRQ_REG(TPS65086_IRQ_DIETEMP, 0, TPS65086_IRQ_DIETEMP_MASK),
+	REGMAP_IRQ_REG(TPS65086_IRQ_SHUTDN, 0, TPS65086_IRQ_SHUTDN_MASK),
+	REGMAP_IRQ_REG(TPS65086_IRQ_FAULT, 0, TPS65086_IRQ_FAULT_MASK),
+};
+
+static struct regmap_irq_chip tps65086_irq_chip = {
+	.name = "tps65086",
+	.status_base = TPS65086_IRQ,
+	.mask_base = TPS65086_IRQ_MASK,
+	.ack_base = TPS65086_IRQ,
+	.init_ack_masked = true,
+	.num_regs = 1,
+	.irqs = tps65086_irqs,
+	.num_irqs = ARRAY_SIZE(tps65086_irqs),
+};
+
+static const struct of_device_id tps65086_of_match_table[] = {
+	{ .compatible = "ti,tps65086", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tps65086_of_match_table);
+
+static int tps65086_probe(struct i2c_client *client,
+			  const struct i2c_device_id *ids)
+{
+	struct tps65086 *tps;
+	unsigned int version;
+	int ret;
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, tps);
+	tps->dev = &client->dev;
+	tps->irq = client->irq;
+
+	tps->regmap = devm_regmap_init_i2c(client, &tps65086_regmap_config);
+	if (IS_ERR(tps->regmap)) {
+		dev_err(tps->dev, "Failed to initialize register map\n");
+		return PTR_ERR(tps->regmap);
+	}
+
+	ret = regmap_read(tps->regmap, TPS65086_DEVICEID, &version);
+	if (ret) {
+		dev_err(tps->dev, "Failed to read revision register\n");
+		return ret;
+	}
+
+	dev_info(tps->dev, "Device: TPS65086%01lX, OTP: %c, Rev: %ld\n",
+		 (version & TPS65086_DEVICEID_PART_MASK),
+		 (char)((version & TPS65086_DEVICEID_OTP_MASK) >> 4) + 'A',
+		 (version & TPS65086_DEVICEID_REV_MASK) >> 6);
+
+	ret = regmap_add_irq_chip(tps->regmap, tps->irq, IRQF_ONESHOT, 0,
+				  &tps65086_irq_chip, &tps->irq_data);
+	if (ret) {
+		dev_err(tps->dev, "Failed to register IRQ chip\n");
+		return ret;
+	}
+
+	ret = mfd_add_devices(tps->dev, PLATFORM_DEVID_AUTO, tps65086_cells,
+			      ARRAY_SIZE(tps65086_cells), NULL, 0,
+			      regmap_irq_get_domain(tps->irq_data));
+	if (ret) {
+		regmap_del_irq_chip(tps->irq, tps->irq_data);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tps65086_remove(struct i2c_client *client)
+{
+	struct tps65086 *tps = i2c_get_clientdata(client);
+
+	regmap_del_irq_chip(tps->irq, tps->irq_data);
+
+	return 0;
+}
+
+static const struct i2c_device_id tps65086_id_table[] = {
+	{ "tps65086", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, tps65086_id_table);
+
+static struct i2c_driver tps65086_driver = {
+	.driver		= {
+		.name	= "tps65086",
+		.of_match_table = tps65086_of_match_table,
+	},
+	.probe		= tps65086_probe,
+	.remove		= tps65086_remove,
+	.id_table       = tps65086_id_table,
+};
+module_i2c_driver(tps65086_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65086 PMIC Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/tps65086.h b/include/linux/mfd/tps65086.h
new file mode 100644
index 0000000..a228ae4
--- /dev/null
+++ b/include/linux/mfd/tps65086.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#ifndef __LINUX_MFD_TPS65086_H
+#define __LINUX_MFD_TPS65086_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+/* List of registers for TPS65086 */
+#define TPS65086_DEVICEID		0x01
+#define TPS65086_IRQ			0x02
+#define TPS65086_IRQ_MASK		0x03
+#define TPS65086_PMICSTAT		0x04
+#define TPS65086_SHUTDNSRC		0x05
+#define TPS65086_BUCK1CTRL		0x20
+#define TPS65086_BUCK2CTRL		0x21
+#define TPS65086_BUCK3DECAY		0x22
+#define TPS65086_BUCK3VID		0x23
+#define TPS65086_BUCK3SLPCTRL		0x24
+#define TPS65086_BUCK4CTRL		0x25
+#define TPS65086_BUCK5CTRL		0x26
+#define TPS65086_BUCK6CTRL		0x27
+#define TPS65086_LDOA2CTRL		0x28
+#define TPS65086_LDOA3CTRL		0x29
+#define TPS65086_DISCHCTRL1		0x40
+#define TPS65086_DISCHCTRL2		0x41
+#define TPS65086_DISCHCTRL3		0x42
+#define TPS65086_PG_DELAY1		0x43
+#define TPS65086_FORCESHUTDN		0x91
+#define TPS65086_BUCK1SLPCTRL		0x92
+#define TPS65086_BUCK2SLPCTRL		0x93
+#define TPS65086_BUCK4VID		0x94
+#define TPS65086_BUCK4SLPVID		0x95
+#define TPS65086_BUCK5VID		0x96
+#define TPS65086_BUCK5SLPVID		0x97
+#define TPS65086_BUCK6VID		0x98
+#define TPS65086_BUCK6SLPVID		0x99
+#define TPS65086_LDOA2VID		0x9A
+#define TPS65086_LDOA3VID		0x9B
+#define TPS65086_BUCK123CTRL		0x9C
+#define TPS65086_PG_DELAY2		0x9D
+#define TPS65086_PIN_EN_MASK1		0x9E
+#define TPS65086_PIN_EN_MASK2		0x9F
+#define TPS65086_SWVTT_EN		0x9F
+#define TPS65086_PIN_EN_OVR1		0xA0
+#define TPS65086_PIN_EN_OVR2		0xA1
+#define TPS65086_GPOCTRL		0xA1
+#define TPS65086_PWR_FAULT_MASK1	0xA2
+#define TPS65086_PWR_FAULT_MASK2	0xA3
+#define TPS65086_GPO1PG_CTRL1		0xA4
+#define TPS65086_GPO1PG_CTRL2		0xA5
+#define TPS65086_GPO4PG_CTRL1		0xA6
+#define TPS65086_GPO4PG_CTRL2		0xA7
+#define TPS65086_GPO2PG_CTRL1		0xA8
+#define TPS65086_GPO2PG_CTRL2		0xA9
+#define TPS65086_GPO3PG_CTRL1		0xAA
+#define TPS65086_GPO3PG_CTRL2		0xAB
+#define TPS65086_LDOA1CTRL		0xAE
+#define TPS65086_PG_STATUS1		0xB0
+#define TPS65086_PG_STATUS2		0xB1
+#define TPS65086_PWR_FAULT_STATUS1	0xB2
+#define TPS65086_PWR_FAULT_STATUS2	0xB3
+#define TPS65086_TEMPCRIT		0xB4
+#define TPS65086_TEMPHOT		0xB5
+#define TPS65086_OC_STATUS		0xB6
+
+/* IRQ Register field definitions */
+#define TPS65086_IRQ_DIETEMP_MASK	BIT(0)
+#define TPS65086_IRQ_SHUTDN_MASK	BIT(3)
+#define TPS65086_IRQ_FAULT_MASK		BIT(7)
+
+/* DEVICEID Register field definitions */
+#define TPS65086_DEVICEID_PART_MASK	GENMASK(3, 0)
+#define TPS65086_DEVICEID_OTP_MASK	GENMASK(5, 4)
+#define TPS65086_DEVICEID_REV_MASK	GENMASK(7, 6)
+
+/* VID Masks */
+#define BUCK_VID_MASK			GENMASK(7, 1)
+#define VDOA1_VID_MASK			GENMASK(4, 1)
+#define VDOA23_VID_MASK			GENMASK(3, 0)
+
+/* Define the TPS65086 IRQ numbers */
+enum tps65086_irqs {
+	TPS65086_IRQ_DIETEMP,
+	TPS65086_IRQ_SHUTDN,
+	TPS65086_IRQ_FAULT,
+};
+
+/**
+ * struct tps65086 - state holder for the tps65086 driver
+ *
+ * Device data may be used to access the TPS65086 chip
+ */
+struct tps65086 {
+	struct device *dev;
+	struct regmap *regmap;
+
+	/* IRQ Data */
+	int irq;
+	struct regmap_irq_chip_data *irq_data;
+};
+
+#endif /* __LINUX_MFD_TPS65086_H */
-- 
2.7.0

[PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC

[Andrew F. Davis]

Add support for the TPS65086 PMIC GPOs.

TPS65086 has four configurable GPOs that can be used for several
purposes. These are output only.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/gpio/Kconfig         |   6 ++
 drivers/gpio/Makefile        |   1 +
 drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 151 insertions(+)
 create mode 100644 drivers/gpio/gpio-tps65086.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c88dd24..e35e120 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -844,6 +844,12 @@ config GPIO_TIMBERDALE
 	---help---
 	Add support for the GPIO IP in the timberdale FPGA.
 
+config GPIO_TPS65086
+	tristate "TI TPS65086 GPO"
+	depends on MFD_TPS65086
+	help
+	  This driver supports the GPO on TI TPS65086x PMICs.
+
 config GPIO_TPS6586X
 	bool "TPS6586X GPIO"
 	depends on MFD_TPS6586X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ece7d7c..c759190 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
 obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
+obj-$(CONFIG_GPIO_TPS65086)	+= gpio-tps65086.o
 obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
new file mode 100644
index 0000000..d5d9e47
--- /dev/null
+++ b/drivers/gpio/gpio-tps65086.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tps65086.h>
+
+struct tps65086_gpio {
+	struct gpio_chip chip;
+	struct tps65086 *tps;
+};
+
+static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct tps65086_gpio, chip);
+}
+
+static int tps65086_gpio_get_direction(struct gpio_chip *chip,
+				       unsigned offset)
+{
+	/* This device is output only */
+	return 0;
+}
+
+static int tps65086_gpio_direction_input(struct gpio_chip *chip,
+					 unsigned offset)
+{
+	/* This device is output only */
+	return -EINVAL;
+}
+
+static int tps65086_gpio_direction_output(struct gpio_chip *chip,
+					  unsigned offset, int value)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
+
+	/* Set the initial value */
+	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
+			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
+
+	return 0;
+}
+
+static int tps65086_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & BIT(4 + offset);
+}
+
+static void tps65086_gpio_set(struct gpio_chip *chip, unsigned offset,
+			      int value)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
+
+	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
+			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
+}
+
+static struct gpio_chip template_chip = {
+	.label			= "tps65086-gpio",
+	.owner			= THIS_MODULE,
+	.get_direction		= tps65086_gpio_get_direction,
+	.direction_input	= tps65086_gpio_direction_input,
+	.direction_output	= tps65086_gpio_direction_output,
+	.get			= tps65086_gpio_get,
+	.set			= tps65086_gpio_set,
+	.base			= -1,
+	.ngpio			= 4,
+	.can_sleep		= true,
+};
+
+static int tps65086_gpio_probe(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, gpio);
+
+	gpio->tps = dev_get_drvdata(pdev->dev.parent);
+	gpio->chip = template_chip;
+	gpio->chip.parent = gpio->tps->dev;
+
+	ret = gpiochip_add(&gpio->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tps65086_gpio_remove(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&gpio->chip);
+
+	return 0;
+}
+
+static const struct platform_device_id tps65086_gpio_id_table[] = {
+	{ "tps65086-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table);
+
+static struct platform_driver tps65086_gpio_driver = {
+	.driver = {
+		.name = "tps65086-gpio",
+	},
+	.probe = tps65086_gpio_probe,
+	.remove = tps65086_gpio_remove,
+	.id_table = tps65086_gpio_id_table,
+};
+module_platform_driver(tps65086_gpio_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65086 GPIO driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.0

[PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC

[Andrew F. Davis]

Add support for the TPS65086 PMIC GPOs.

TPS65086 has four configurable GPOs that can be used for several
purposes. These are output only.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/gpio/Kconfig         |   6 ++
 drivers/gpio/Makefile        |   1 +
 drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 151 insertions(+)
 create mode 100644 drivers/gpio/gpio-tps65086.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c88dd24..e35e120 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -844,6 +844,12 @@ config GPIO_TIMBERDALE
 	---help---
 	Add support for the GPIO IP in the timberdale FPGA.
 
+config GPIO_TPS65086
+	tristate "TI TPS65086 GPO"
+	depends on MFD_TPS65086
+	help
+	  This driver supports the GPO on TI TPS65086x PMICs.
+
 config GPIO_TPS6586X
 	bool "TPS6586X GPIO"
 	depends on MFD_TPS6586X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ece7d7c..c759190 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
 obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
+obj-$(CONFIG_GPIO_TPS65086)	+= gpio-tps65086.o
 obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
new file mode 100644
index 0000000..d5d9e47
--- /dev/null
+++ b/drivers/gpio/gpio-tps65086.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tps65086.h>
+
+struct tps65086_gpio {
+	struct gpio_chip chip;
+	struct tps65086 *tps;
+};
+
+static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct tps65086_gpio, chip);
+}
+
+static int tps65086_gpio_get_direction(struct gpio_chip *chip,
+				       unsigned offset)
+{
+	/* This device is output only */
+	return 0;
+}
+
+static int tps65086_gpio_direction_input(struct gpio_chip *chip,
+					 unsigned offset)
+{
+	/* This device is output only */
+	return -EINVAL;
+}
+
+static int tps65086_gpio_direction_output(struct gpio_chip *chip,
+					  unsigned offset, int value)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
+
+	/* Set the initial value */
+	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
+			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
+
+	return 0;
+}
+
+static int tps65086_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & BIT(4 + offset);
+}
+
+static void tps65086_gpio_set(struct gpio_chip *chip, unsigned offset,
+			      int value)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
+
+	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
+			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
+}
+
+static struct gpio_chip template_chip = {
+	.label			= "tps65086-gpio",
+	.owner			= THIS_MODULE,
+	.get_direction		= tps65086_gpio_get_direction,
+	.direction_input	= tps65086_gpio_direction_input,
+	.direction_output	= tps65086_gpio_direction_output,
+	.get			= tps65086_gpio_get,
+	.set			= tps65086_gpio_set,
+	.base			= -1,
+	.ngpio			= 4,
+	.can_sleep		= true,
+};
+
+static int tps65086_gpio_probe(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, gpio);
+
+	gpio->tps = dev_get_drvdata(pdev->dev.parent);
+	gpio->chip = template_chip;
+	gpio->chip.parent = gpio->tps->dev;
+
+	ret = gpiochip_add(&gpio->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tps65086_gpio_remove(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&gpio->chip);
+
+	return 0;
+}
+
+static const struct platform_device_id tps65086_gpio_id_table[] = {
+	{ "tps65086-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table);
+
+static struct platform_driver tps65086_gpio_driver = {
+	.driver = {
+		.name = "tps65086-gpio",
+	},
+	.probe = tps65086_gpio_probe,
+	.remove = tps65086_gpio_remove,
+	.id_table = tps65086_gpio_id_table,
+};
+module_platform_driver(tps65086_gpio_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65086 GPIO driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.0

Re: [PATCH v6 1/3] Documentation: tps65086: Add DT bindings for the TPS65086 PMIC

[Lee Jones]

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> The TPS65086 PMIC contains several regulators and a GPO controller.
> Add bindings for the TPS65086 PMIC.
> 
> Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>
> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/mfd/tps65086.txt | 55 ++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

Acked-by: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

> diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
> new file mode 100644
> index 0000000..d370561
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
> @@ -0,0 +1,55 @@
> +* TPS65086 Power Management Integrated Circuit (PMIC) bindings
> +
> +Required properties:
> + - compatible		: Should be "ti,tps65086".
> + - reg			: I2C slave address.
> + - interrupt-parent	: Phandle to the parent interrupt controller.
> + - interrupts		: The interrupt line the device is connected to.
> + - interrupt-controller	: Marks the device node as an interrupt controller.
> + - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
> +			    The first cell is the IRQ number.
> +			    The second cell is the flags, encoded as trigger
> +			    masks from ../interrupt-controller/interrupts.txt.
> + - gpio-controller      : Marks the device node as a GPIO Controller.
> + - #gpio-cells          : Should be two.  The first cell is the pin number and
> +                            the second cell is used to specify flags.
> +                            See ../gpio/gpio.txt for more information.
> + - regulators:          : List of child nodes that specify the regulator
> +                            initialization data. Child nodes must be named
> +                            after their hardware counterparts: buck[1-6],
> +                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
> +                            node is defined using the standard binding for
> +                            regulators and the optional regulator properties
> +                            defined below.
> +
> +Optional regulator properties:
> + - ti,regulator-step-size-25mv	: This is applicable for buck[1,2,6], set this
> +				    if the regulator is factory set with a 25mv
> +				    step voltage mapping.
> + - ti,regulator-decay		: This is applicable for buck[1-6], set this if
> +				    the output needs to decay, default is for
> +				    the output to slew down.
> +
> +Example:
> +
> +	pmic: tps65086@5e {
> +		compatible = "ti,tps65086";
> +		reg = <0x5e>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		regulators {
> +			buck1 {
> +				regulator-name = "vcc1";
> +				regulator-min-microvolt = <1600000>;
> +				regulator-max-microvolt = <1600000>;
> +				regulator-boot-on;
> +				ti,regulator-decay;
> +				ti,regulator-step-size-25mv;
> +			};
> +		};
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 1/3] Documentation: tps65086: Add DT bindings for the TPS65086 PMIC

[Lee Jones]

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> The TPS65086 PMIC contains several regulators and a GPO controller.
> Add bindings for the TPS65086 PMIC.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>  Documentation/devicetree/bindings/mfd/tps65086.txt | 55 ++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
> new file mode 100644
> index 0000000..d370561
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
> @@ -0,0 +1,55 @@
> +* TPS65086 Power Management Integrated Circuit (PMIC) bindings
> +
> +Required properties:
> + - compatible		: Should be "ti,tps65086".
> + - reg			: I2C slave address.
> + - interrupt-parent	: Phandle to the parent interrupt controller.
> + - interrupts		: The interrupt line the device is connected to.
> + - interrupt-controller	: Marks the device node as an interrupt controller.
> + - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
> +			    The first cell is the IRQ number.
> +			    The second cell is the flags, encoded as trigger
> +			    masks from ../interrupt-controller/interrupts.txt.
> + - gpio-controller      : Marks the device node as a GPIO Controller.
> + - #gpio-cells          : Should be two.  The first cell is the pin number and
> +                            the second cell is used to specify flags.
> +                            See ../gpio/gpio.txt for more information.
> + - regulators:          : List of child nodes that specify the regulator
> +                            initialization data. Child nodes must be named
> +                            after their hardware counterparts: buck[1-6],
> +                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
> +                            node is defined using the standard binding for
> +                            regulators and the optional regulator properties
> +                            defined below.
> +
> +Optional regulator properties:
> + - ti,regulator-step-size-25mv	: This is applicable for buck[1,2,6], set this
> +				    if the regulator is factory set with a 25mv
> +				    step voltage mapping.
> + - ti,regulator-decay		: This is applicable for buck[1-6], set this if
> +				    the output needs to decay, default is for
> +				    the output to slew down.
> +
> +Example:
> +
> +	pmic: tps65086@5e {
> +		compatible = "ti,tps65086";
> +		reg = <0x5e>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		regulators {
> +			buck1 {
> +				regulator-name = "vcc1";
> +				regulator-min-microvolt = <1600000>;
> +				regulator-max-microvolt = <1600000>;
> +				regulator-boot-on;
> +				ti,regulator-decay;
> +				ti,regulator-step-size-25mv;
> +			};
> +		};
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC

[Lee Jones]

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> Add support for the TPS65086 PMIC GPOs.
> 
> TPS65086 has four configurable GPOs that can be used for several
> purposes. These are output only.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
>  drivers/gpio/Kconfig         |   6 ++
>  drivers/gpio/Makefile        |   1 +
>  drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 151 insertions(+)
>  create mode 100644 drivers/gpio/gpio-tps65086.c

Is this patch orthogonal to the other two in the set, or do they all
need to go in together?

> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index c88dd24..e35e120 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -844,6 +844,12 @@ config GPIO_TIMBERDALE
>  	---help---
>  	Add support for the GPIO IP in the timberdale FPGA.
>  
> +config GPIO_TPS65086
> +	tristate "TI TPS65086 GPO"
> +	depends on MFD_TPS65086
> +	help
> +	  This driver supports the GPO on TI TPS65086x PMICs.
> +
>  config GPIO_TPS6586X
>  	bool "TPS6586X GPIO"
>  	depends on MFD_TPS6586X
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index ece7d7c..c759190 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -95,6 +95,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
>  obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
>  obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
>  obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
> +obj-$(CONFIG_GPIO_TPS65086)	+= gpio-tps65086.o
>  obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
>  obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
>  obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
> diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
> new file mode 100644
> index 0000000..d5d9e47
> --- /dev/null
> +++ b/drivers/gpio/gpio-tps65086.c
> @@ -0,0 +1,144 @@
> +/*
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + *	Andrew F. Davis <afd@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65912 driver
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mfd/tps65086.h>
> +
> +struct tps65086_gpio {
> +	struct gpio_chip chip;
> +	struct tps65086 *tps;
> +};
> +
> +static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
> +{
> +	return container_of(chip, struct tps65086_gpio, chip);
> +}
> +
> +static int tps65086_gpio_get_direction(struct gpio_chip *chip,
> +				       unsigned offset)
> +{
> +	/* This device is output only */
> +	return 0;
> +}
> +
> +static int tps65086_gpio_direction_input(struct gpio_chip *chip,
> +					 unsigned offset)
> +{
> +	/* This device is output only */
> +	return -EINVAL;
> +}
> +
> +static int tps65086_gpio_direction_output(struct gpio_chip *chip,
> +					  unsigned offset, int value)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +
> +	/* Set the initial value */
> +	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
> +			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
> +
> +	return 0;
> +}
> +
> +static int tps65086_gpio_get(struct gpio_chip *chip, unsigned offset)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +	int ret, val;
> +
> +	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return val & BIT(4 + offset);
> +}
> +
> +static void tps65086_gpio_set(struct gpio_chip *chip, unsigned offset,
> +			      int value)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +
> +	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
> +			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
> +}
> +
> +static struct gpio_chip template_chip = {
> +	.label			= "tps65086-gpio",
> +	.owner			= THIS_MODULE,
> +	.get_direction		= tps65086_gpio_get_direction,
> +	.direction_input	= tps65086_gpio_direction_input,
> +	.direction_output	= tps65086_gpio_direction_output,
> +	.get			= tps65086_gpio_get,
> +	.set			= tps65086_gpio_set,
> +	.base			= -1,
> +	.ngpio			= 4,
> +	.can_sleep		= true,
> +};
> +
> +static int tps65086_gpio_probe(struct platform_device *pdev)
> +{
> +	struct tps65086_gpio *gpio;
> +	int ret;
> +
> +	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> +	if (!gpio)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, gpio);
> +
> +	gpio->tps = dev_get_drvdata(pdev->dev.parent);
> +	gpio->chip = template_chip;
> +	gpio->chip.parent = gpio->tps->dev;
> +
> +	ret = gpiochip_add(&gpio->chip);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tps65086_gpio_remove(struct platform_device *pdev)
> +{
> +	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
> +
> +	gpiochip_remove(&gpio->chip);
> +
> +	return 0;
> +}
> +
> +static const struct platform_device_id tps65086_gpio_id_table[] = {
> +	{ "tps65086-gpio", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table);
> +
> +static struct platform_driver tps65086_gpio_driver = {
> +	.driver = {
> +		.name = "tps65086-gpio",
> +	},
> +	.probe = tps65086_gpio_probe,
> +	.remove = tps65086_gpio_remove,
> +	.id_table = tps65086_gpio_id_table,
> +};
> +module_platform_driver(tps65086_gpio_driver);
> +
> +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
> +MODULE_DESCRIPTION("TPS65086 GPIO driver");
> +MODULE_LICENSE("GPL v2");

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC

[Lee Jones]

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> Add support for the TPS65086 PMIC GPOs.
> 
> TPS65086 has four configurable GPOs that can be used for several
> purposes. These are output only.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
>  drivers/gpio/Kconfig         |   6 ++
>  drivers/gpio/Makefile        |   1 +
>  drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 151 insertions(+)
>  create mode 100644 drivers/gpio/gpio-tps65086.c

Is this patch orthogonal to the other two in the set, or do they all
need to go in together?

> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index c88dd24..e35e120 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -844,6 +844,12 @@ config GPIO_TIMBERDALE
>  	---help---
>  	Add support for the GPIO IP in the timberdale FPGA.
>  
> +config GPIO_TPS65086
> +	tristate "TI TPS65086 GPO"
> +	depends on MFD_TPS65086
> +	help
> +	  This driver supports the GPO on TI TPS65086x PMICs.
> +
>  config GPIO_TPS6586X
>  	bool "TPS6586X GPIO"
>  	depends on MFD_TPS6586X
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index ece7d7c..c759190 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -95,6 +95,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
>  obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
>  obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
>  obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
> +obj-$(CONFIG_GPIO_TPS65086)	+= gpio-tps65086.o
>  obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
>  obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
>  obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
> diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
> new file mode 100644
> index 0000000..d5d9e47
> --- /dev/null
> +++ b/drivers/gpio/gpio-tps65086.c
> @@ -0,0 +1,144 @@
> +/*
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + *	Andrew F. Davis <afd@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65912 driver
> + */
> +
> +#include <linux/gpio.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mfd/tps65086.h>
> +
> +struct tps65086_gpio {
> +	struct gpio_chip chip;
> +	struct tps65086 *tps;
> +};
> +
> +static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
> +{
> +	return container_of(chip, struct tps65086_gpio, chip);
> +}
> +
> +static int tps65086_gpio_get_direction(struct gpio_chip *chip,
> +				       unsigned offset)
> +{
> +	/* This device is output only */
> +	return 0;
> +}
> +
> +static int tps65086_gpio_direction_input(struct gpio_chip *chip,
> +					 unsigned offset)
> +{
> +	/* This device is output only */
> +	return -EINVAL;
> +}
> +
> +static int tps65086_gpio_direction_output(struct gpio_chip *chip,
> +					  unsigned offset, int value)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +
> +	/* Set the initial value */
> +	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
> +			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
> +
> +	return 0;
> +}
> +
> +static int tps65086_gpio_get(struct gpio_chip *chip, unsigned offset)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +	int ret, val;
> +
> +	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	return val & BIT(4 + offset);
> +}
> +
> +static void tps65086_gpio_set(struct gpio_chip *chip, unsigned offset,
> +			      int value)
> +{
> +	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
> +
> +	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
> +			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
> +}
> +
> +static struct gpio_chip template_chip = {
> +	.label			= "tps65086-gpio",
> +	.owner			= THIS_MODULE,
> +	.get_direction		= tps65086_gpio_get_direction,
> +	.direction_input	= tps65086_gpio_direction_input,
> +	.direction_output	= tps65086_gpio_direction_output,
> +	.get			= tps65086_gpio_get,
> +	.set			= tps65086_gpio_set,
> +	.base			= -1,
> +	.ngpio			= 4,
> +	.can_sleep		= true,
> +};
> +
> +static int tps65086_gpio_probe(struct platform_device *pdev)
> +{
> +	struct tps65086_gpio *gpio;
> +	int ret;
> +
> +	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> +	if (!gpio)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, gpio);
> +
> +	gpio->tps = dev_get_drvdata(pdev->dev.parent);
> +	gpio->chip = template_chip;
> +	gpio->chip.parent = gpio->tps->dev;
> +
> +	ret = gpiochip_add(&gpio->chip);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tps65086_gpio_remove(struct platform_device *pdev)
> +{
> +	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
> +
> +	gpiochip_remove(&gpio->chip);
> +
> +	return 0;
> +}
> +
> +static const struct platform_device_id tps65086_gpio_id_table[] = {
> +	{ "tps65086-gpio", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table);
> +
> +static struct platform_driver tps65086_gpio_driver = {
> +	.driver = {
> +		.name = "tps65086-gpio",
> +	},
> +	.probe = tps65086_gpio_probe,
> +	.remove = tps65086_gpio_remove,
> +	.id_table = tps65086_gpio_id_table,
> +};
> +module_platform_driver(tps65086_gpio_driver);
> +
> +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
> +MODULE_DESCRIPTION("TPS65086 GPIO driver");
> +MODULE_LICENSE("GPL v2");

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC

[Andrew F. Davis]

On 01/26/2016 08:03 AM, Lee Jones wrote:
> On Mon, 25 Jan 2016, Andrew F. Davis wrote:
>
>> Add support for the TPS65086 PMIC GPOs.
>>
>> TPS65086 has four configurable GPOs that can be used for several
>> purposes. These are output only.
>>
>> Signed-off-by: Andrew F. Davis <afd@ti.com>
>> ---
>>   drivers/gpio/Kconfig         |   6 ++
>>   drivers/gpio/Makefile        |   1 +
>>   drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 151 insertions(+)
>>   create mode 100644 drivers/gpio/gpio-tps65086.c
>
> Is this patch orthogonal to the other two in the set, or do they all
> need to go in together?
>

These can all go in separately, in fact Mark has already taken the regulator
component from a previous push of this series. It is only the TPS65912
driver I'm pushing that will need to go all at once due to conflicts with
the driver it is replacing.

Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC

[Andrew F. Davis]

On 01/26/2016 08:03 AM, Lee Jones wrote:
> On Mon, 25 Jan 2016, Andrew F. Davis wrote:
>
>> Add support for the TPS65086 PMIC GPOs.
>>
>> TPS65086 has four configurable GPOs that can be used for several
>> purposes. These are output only.
>>
>> Signed-off-by: Andrew F. Davis <afd@ti.com>
>> ---
>>   drivers/gpio/Kconfig         |   6 ++
>>   drivers/gpio/Makefile        |   1 +
>>   drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 151 insertions(+)
>>   create mode 100644 drivers/gpio/gpio-tps65086.c
>
> Is this patch orthogonal to the other two in the set, or do they all
> need to go in together?
>

These can all go in separately, in fact Mark has already taken the regulator
component from a previous push of this series. It is only the TPS65912
driver I'm pushing that will need to go all at once due to conflicts with
the driver it is replacing.

Re: [PATCH v6 1/3] Documentation: tps65086: Add DT bindings for the TPS65086 PMIC

[Lee Jones]

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> The TPS65086 PMIC contains several regulators and a GPO controller.
> Add bindings for the TPS65086 PMIC.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>  Documentation/devicetree/bindings/mfd/tps65086.txt | 55 ++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
> new file mode 100644
> index 0000000..d370561
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
> @@ -0,0 +1,55 @@
> +* TPS65086 Power Management Integrated Circuit (PMIC) bindings
> +
> +Required properties:
> + - compatible		: Should be "ti,tps65086".
> + - reg			: I2C slave address.
> + - interrupt-parent	: Phandle to the parent interrupt controller.
> + - interrupts		: The interrupt line the device is connected to.
> + - interrupt-controller	: Marks the device node as an interrupt controller.
> + - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
> +			    The first cell is the IRQ number.
> +			    The second cell is the flags, encoded as trigger
> +			    masks from ../interrupt-controller/interrupts.txt.
> + - gpio-controller      : Marks the device node as a GPIO Controller.
> + - #gpio-cells          : Should be two.  The first cell is the pin number and
> +                            the second cell is used to specify flags.
> +                            See ../gpio/gpio.txt for more information.
> + - regulators:          : List of child nodes that specify the regulator
> +                            initialization data. Child nodes must be named
> +                            after their hardware counterparts: buck[1-6],
> +                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
> +                            node is defined using the standard binding for
> +                            regulators and the optional regulator properties
> +                            defined below.
> +
> +Optional regulator properties:
> + - ti,regulator-step-size-25mv	: This is applicable for buck[1,2,6], set this
> +				    if the regulator is factory set with a 25mv
> +				    step voltage mapping.
> + - ti,regulator-decay		: This is applicable for buck[1-6], set this if
> +				    the output needs to decay, default is for
> +				    the output to slew down.
> +
> +Example:
> +
> +	pmic: tps65086@5e {
> +		compatible = "ti,tps65086";
> +		reg = <0x5e>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		regulators {
> +			buck1 {
> +				regulator-name = "vcc1";
> +				regulator-min-microvolt = <1600000>;
> +				regulator-max-microvolt = <1600000>;
> +				regulator-boot-on;
> +				ti,regulator-decay;
> +				ti,regulator-step-size-25mv;
> +			};
> +		};
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 1/3] Documentation: tps65086: Add DT bindings for the TPS65086 PMIC

[Lee Jones]

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> The TPS65086 PMIC contains several regulators and a GPO controller.
> Add bindings for the TPS65086 PMIC.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>  Documentation/devicetree/bindings/mfd/tps65086.txt | 55 ++++++++++++++++++++++
>  1 file changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt

Applied, thanks.

> diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
> new file mode 100644
> index 0000000..d370561
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/tps65086.txt
> @@ -0,0 +1,55 @@
> +* TPS65086 Power Management Integrated Circuit (PMIC) bindings
> +
> +Required properties:
> + - compatible		: Should be "ti,tps65086".
> + - reg			: I2C slave address.
> + - interrupt-parent	: Phandle to the parent interrupt controller.
> + - interrupts		: The interrupt line the device is connected to.
> + - interrupt-controller	: Marks the device node as an interrupt controller.
> + - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
> +			    The first cell is the IRQ number.
> +			    The second cell is the flags, encoded as trigger
> +			    masks from ../interrupt-controller/interrupts.txt.
> + - gpio-controller      : Marks the device node as a GPIO Controller.
> + - #gpio-cells          : Should be two.  The first cell is the pin number and
> +                            the second cell is used to specify flags.
> +                            See ../gpio/gpio.txt for more information.
> + - regulators:          : List of child nodes that specify the regulator
> +                            initialization data. Child nodes must be named
> +                            after their hardware counterparts: buck[1-6],
> +                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
> +                            node is defined using the standard binding for
> +                            regulators and the optional regulator properties
> +                            defined below.
> +
> +Optional regulator properties:
> + - ti,regulator-step-size-25mv	: This is applicable for buck[1,2,6], set this
> +				    if the regulator is factory set with a 25mv
> +				    step voltage mapping.
> + - ti,regulator-decay		: This is applicable for buck[1-6], set this if
> +				    the output needs to decay, default is for
> +				    the output to slew down.
> +
> +Example:
> +
> +	pmic: tps65086@5e {
> +		compatible = "ti,tps65086";
> +		reg = <0x5e>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		regulators {
> +			buck1 {
> +				regulator-name = "vcc1";
> +				regulator-min-microvolt = <1600000>;
> +				regulator-max-microvolt = <1600000>;
> +				regulator-boot-on;
> +				ti,regulator-decay;
> +				ti,regulator-step-size-25mv;
> +			};
> +		};
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 2/3] mfd: tps65086: Add driver for the TPS65086 PMIC

[Lee Jones]

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> Add support for the TPS65912 device. It provides communication
> through I2C and contains the following components:
> 
>  - Regulators
>  - Load switches
>  - GPO controller
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
>  drivers/mfd/Kconfig          |  13 ++++
>  drivers/mfd/Makefile         |   1 +
>  drivers/mfd/tps65086.c       | 149 +++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/tps65086.h | 117 +++++++++++++++++++++++++++++++++
>  4 files changed, 280 insertions(+)
>  create mode 100644 drivers/mfd/tps65086.c
>  create mode 100644 include/linux/mfd/tps65086.h

Applied, thanks.

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..fe6d62b 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1106,6 +1106,19 @@ config TPS6507X
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called tps6507x.
>  
> +config MFD_TPS65086
> +	tristate "TI TPS65086 Power Management Integrated Chips (PMICs)"
> +	select REGMAP
> +	select REGMAP_IRQ
> +	select REGMAP_I2C
> +	depends on I2C
> +	help
> +	  If you say yes here you get support for the TPS65086 series of
> +	  Power Management chips.
> +	  This driver provides common support for accessing the device,
> +	  additional drivers must be enabled in order to use the
> +	  functionality of the device.
> +
>  config TPS65911_COMPARATOR
>  	tristate
>  
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0f230a6..06801aa 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -70,6 +70,7 @@ obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
>  obj-$(CONFIG_TPS6105X)		+= tps6105x.o
>  obj-$(CONFIG_TPS65010)		+= tps65010.o
>  obj-$(CONFIG_TPS6507X)		+= tps6507x.o
> +obj-$(CONFIG_MFD_TPS65086)	+= tps65086.o
>  obj-$(CONFIG_MFD_TPS65217)	+= tps65217.o
>  obj-$(CONFIG_MFD_TPS65218)	+= tps65218.o
>  obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o
> diff --git a/drivers/mfd/tps65086.c b/drivers/mfd/tps65086.c
> new file mode 100644
> index 0000000..43119a6
> --- /dev/null
> +++ b/drivers/mfd/tps65086.c
> @@ -0,0 +1,149 @@
> +/*
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + *	Andrew F. Davis <afd@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65912 driver
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +
> +#include <linux/mfd/tps65086.h>
> +
> +static const struct mfd_cell tps65086_cells[] = {
> +	{ .name = "tps65086-regulator", },
> +	{ .name = "tps65086-gpio", },
> +};
> +
> +static const struct regmap_range tps65086_yes_ranges[] = {
> +	regmap_reg_range(TPS65086_IRQ, TPS65086_IRQ),
> +	regmap_reg_range(TPS65086_PMICSTAT, TPS65086_SHUTDNSRC),
> +	regmap_reg_range(TPS65086_GPOCTRL, TPS65086_GPOCTRL),
> +	regmap_reg_range(TPS65086_PG_STATUS1, TPS65086_OC_STATUS),
> +};
> +
> +static const struct regmap_access_table tps65086_volatile_table = {
> +	.yes_ranges = tps65086_yes_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(tps65086_yes_ranges),
> +};
> +
> +static const struct regmap_config tps65086_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.cache_type = REGCACHE_RBTREE,
> +	.volatile_table = &tps65086_volatile_table,
> +};
> +
> +static const struct regmap_irq tps65086_irqs[] = {
> +	REGMAP_IRQ_REG(TPS65086_IRQ_DIETEMP, 0, TPS65086_IRQ_DIETEMP_MASK),
> +	REGMAP_IRQ_REG(TPS65086_IRQ_SHUTDN, 0, TPS65086_IRQ_SHUTDN_MASK),
> +	REGMAP_IRQ_REG(TPS65086_IRQ_FAULT, 0, TPS65086_IRQ_FAULT_MASK),
> +};
> +
> +static struct regmap_irq_chip tps65086_irq_chip = {
> +	.name = "tps65086",
> +	.status_base = TPS65086_IRQ,
> +	.mask_base = TPS65086_IRQ_MASK,
> +	.ack_base = TPS65086_IRQ,
> +	.init_ack_masked = true,
> +	.num_regs = 1,
> +	.irqs = tps65086_irqs,
> +	.num_irqs = ARRAY_SIZE(tps65086_irqs),
> +};
> +
> +static const struct of_device_id tps65086_of_match_table[] = {
> +	{ .compatible = "ti,tps65086", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, tps65086_of_match_table);
> +
> +static int tps65086_probe(struct i2c_client *client,
> +			  const struct i2c_device_id *ids)
> +{
> +	struct tps65086 *tps;
> +	unsigned int version;
> +	int ret;
> +
> +	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
> +	if (!tps)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(client, tps);
> +	tps->dev = &client->dev;
> +	tps->irq = client->irq;
> +
> +	tps->regmap = devm_regmap_init_i2c(client, &tps65086_regmap_config);
> +	if (IS_ERR(tps->regmap)) {
> +		dev_err(tps->dev, "Failed to initialize register map\n");
> +		return PTR_ERR(tps->regmap);
> +	}
> +
> +	ret = regmap_read(tps->regmap, TPS65086_DEVICEID, &version);
> +	if (ret) {
> +		dev_err(tps->dev, "Failed to read revision register\n");
> +		return ret;
> +	}
> +
> +	dev_info(tps->dev, "Device: TPS65086%01lX, OTP: %c, Rev: %ld\n",
> +		 (version & TPS65086_DEVICEID_PART_MASK),
> +		 (char)((version & TPS65086_DEVICEID_OTP_MASK) >> 4) + 'A',
> +		 (version & TPS65086_DEVICEID_REV_MASK) >> 6);
> +
> +	ret = regmap_add_irq_chip(tps->regmap, tps->irq, IRQF_ONESHOT, 0,
> +				  &tps65086_irq_chip, &tps->irq_data);
> +	if (ret) {
> +		dev_err(tps->dev, "Failed to register IRQ chip\n");
> +		return ret;
> +	}
> +
> +	ret = mfd_add_devices(tps->dev, PLATFORM_DEVID_AUTO, tps65086_cells,
> +			      ARRAY_SIZE(tps65086_cells), NULL, 0,
> +			      regmap_irq_get_domain(tps->irq_data));
> +	if (ret) {
> +		regmap_del_irq_chip(tps->irq, tps->irq_data);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tps65086_remove(struct i2c_client *client)
> +{
> +	struct tps65086 *tps = i2c_get_clientdata(client);
> +
> +	regmap_del_irq_chip(tps->irq, tps->irq_data);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id tps65086_id_table[] = {
> +	{ "tps65086", 0 },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(i2c, tps65086_id_table);
> +
> +static struct i2c_driver tps65086_driver = {
> +	.driver		= {
> +		.name	= "tps65086",
> +		.of_match_table = tps65086_of_match_table,
> +	},
> +	.probe		= tps65086_probe,
> +	.remove		= tps65086_remove,
> +	.id_table       = tps65086_id_table,
> +};
> +module_i2c_driver(tps65086_driver);
> +
> +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
> +MODULE_DESCRIPTION("TPS65086 PMIC Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/tps65086.h b/include/linux/mfd/tps65086.h
> new file mode 100644
> index 0000000..a228ae4
> --- /dev/null
> +++ b/include/linux/mfd/tps65086.h
> @@ -0,0 +1,117 @@
> +/*
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + *	Andrew F. Davis <afd@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65912 driver
> + */
> +
> +#ifndef __LINUX_MFD_TPS65086_H
> +#define __LINUX_MFD_TPS65086_H
> +
> +#include <linux/device.h>
> +#include <linux/regmap.h>
> +
> +/* List of registers for TPS65086 */
> +#define TPS65086_DEVICEID		0x01
> +#define TPS65086_IRQ			0x02
> +#define TPS65086_IRQ_MASK		0x03
> +#define TPS65086_PMICSTAT		0x04
> +#define TPS65086_SHUTDNSRC		0x05
> +#define TPS65086_BUCK1CTRL		0x20
> +#define TPS65086_BUCK2CTRL		0x21
> +#define TPS65086_BUCK3DECAY		0x22
> +#define TPS65086_BUCK3VID		0x23
> +#define TPS65086_BUCK3SLPCTRL		0x24
> +#define TPS65086_BUCK4CTRL		0x25
> +#define TPS65086_BUCK5CTRL		0x26
> +#define TPS65086_BUCK6CTRL		0x27
> +#define TPS65086_LDOA2CTRL		0x28
> +#define TPS65086_LDOA3CTRL		0x29
> +#define TPS65086_DISCHCTRL1		0x40
> +#define TPS65086_DISCHCTRL2		0x41
> +#define TPS65086_DISCHCTRL3		0x42
> +#define TPS65086_PG_DELAY1		0x43
> +#define TPS65086_FORCESHUTDN		0x91
> +#define TPS65086_BUCK1SLPCTRL		0x92
> +#define TPS65086_BUCK2SLPCTRL		0x93
> +#define TPS65086_BUCK4VID		0x94
> +#define TPS65086_BUCK4SLPVID		0x95
> +#define TPS65086_BUCK5VID		0x96
> +#define TPS65086_BUCK5SLPVID		0x97
> +#define TPS65086_BUCK6VID		0x98
> +#define TPS65086_BUCK6SLPVID		0x99
> +#define TPS65086_LDOA2VID		0x9A
> +#define TPS65086_LDOA3VID		0x9B
> +#define TPS65086_BUCK123CTRL		0x9C
> +#define TPS65086_PG_DELAY2		0x9D
> +#define TPS65086_PIN_EN_MASK1		0x9E
> +#define TPS65086_PIN_EN_MASK2		0x9F
> +#define TPS65086_SWVTT_EN		0x9F
> +#define TPS65086_PIN_EN_OVR1		0xA0
> +#define TPS65086_PIN_EN_OVR2		0xA1
> +#define TPS65086_GPOCTRL		0xA1
> +#define TPS65086_PWR_FAULT_MASK1	0xA2
> +#define TPS65086_PWR_FAULT_MASK2	0xA3
> +#define TPS65086_GPO1PG_CTRL1		0xA4
> +#define TPS65086_GPO1PG_CTRL2		0xA5
> +#define TPS65086_GPO4PG_CTRL1		0xA6
> +#define TPS65086_GPO4PG_CTRL2		0xA7
> +#define TPS65086_GPO2PG_CTRL1		0xA8
> +#define TPS65086_GPO2PG_CTRL2		0xA9
> +#define TPS65086_GPO3PG_CTRL1		0xAA
> +#define TPS65086_GPO3PG_CTRL2		0xAB
> +#define TPS65086_LDOA1CTRL		0xAE
> +#define TPS65086_PG_STATUS1		0xB0
> +#define TPS65086_PG_STATUS2		0xB1
> +#define TPS65086_PWR_FAULT_STATUS1	0xB2
> +#define TPS65086_PWR_FAULT_STATUS2	0xB3
> +#define TPS65086_TEMPCRIT		0xB4
> +#define TPS65086_TEMPHOT		0xB5
> +#define TPS65086_OC_STATUS		0xB6
> +
> +/* IRQ Register field definitions */
> +#define TPS65086_IRQ_DIETEMP_MASK	BIT(0)
> +#define TPS65086_IRQ_SHUTDN_MASK	BIT(3)
> +#define TPS65086_IRQ_FAULT_MASK		BIT(7)
> +
> +/* DEVICEID Register field definitions */
> +#define TPS65086_DEVICEID_PART_MASK	GENMASK(3, 0)
> +#define TPS65086_DEVICEID_OTP_MASK	GENMASK(5, 4)
> +#define TPS65086_DEVICEID_REV_MASK	GENMASK(7, 6)
> +
> +/* VID Masks */
> +#define BUCK_VID_MASK			GENMASK(7, 1)
> +#define VDOA1_VID_MASK			GENMASK(4, 1)
> +#define VDOA23_VID_MASK			GENMASK(3, 0)
> +
> +/* Define the TPS65086 IRQ numbers */
> +enum tps65086_irqs {
> +	TPS65086_IRQ_DIETEMP,
> +	TPS65086_IRQ_SHUTDN,
> +	TPS65086_IRQ_FAULT,
> +};
> +
> +/**
> + * struct tps65086 - state holder for the tps65086 driver
> + *
> + * Device data may be used to access the TPS65086 chip
> + */
> +struct tps65086 {
> +	struct device *dev;
> +	struct regmap *regmap;
> +
> +	/* IRQ Data */
> +	int irq;
> +	struct regmap_irq_chip_data *irq_data;
> +};
> +
> +#endif /* __LINUX_MFD_TPS65086_H */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 2/3] mfd: tps65086: Add driver for the TPS65086 PMIC

[Lee Jones]

On Mon, 25 Jan 2016, Andrew F. Davis wrote:

> Add support for the TPS65912 device. It provides communication
> through I2C and contains the following components:
> 
>  - Regulators
>  - Load switches
>  - GPO controller
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> ---
>  drivers/mfd/Kconfig          |  13 ++++
>  drivers/mfd/Makefile         |   1 +
>  drivers/mfd/tps65086.c       | 149 +++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/tps65086.h | 117 +++++++++++++++++++++++++++++++++
>  4 files changed, 280 insertions(+)
>  create mode 100644 drivers/mfd/tps65086.c
>  create mode 100644 include/linux/mfd/tps65086.h

Applied, thanks.

> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ca66de..fe6d62b 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1106,6 +1106,19 @@ config TPS6507X
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called tps6507x.
>  
> +config MFD_TPS65086
> +	tristate "TI TPS65086 Power Management Integrated Chips (PMICs)"
> +	select REGMAP
> +	select REGMAP_IRQ
> +	select REGMAP_I2C
> +	depends on I2C
> +	help
> +	  If you say yes here you get support for the TPS65086 series of
> +	  Power Management chips.
> +	  This driver provides common support for accessing the device,
> +	  additional drivers must be enabled in order to use the
> +	  functionality of the device.
> +
>  config TPS65911_COMPARATOR
>  	tristate
>  
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0f230a6..06801aa 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -70,6 +70,7 @@ obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
>  obj-$(CONFIG_TPS6105X)		+= tps6105x.o
>  obj-$(CONFIG_TPS65010)		+= tps65010.o
>  obj-$(CONFIG_TPS6507X)		+= tps6507x.o
> +obj-$(CONFIG_MFD_TPS65086)	+= tps65086.o
>  obj-$(CONFIG_MFD_TPS65217)	+= tps65217.o
>  obj-$(CONFIG_MFD_TPS65218)	+= tps65218.o
>  obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o
> diff --git a/drivers/mfd/tps65086.c b/drivers/mfd/tps65086.c
> new file mode 100644
> index 0000000..43119a6
> --- /dev/null
> +++ b/drivers/mfd/tps65086.c
> @@ -0,0 +1,149 @@
> +/*
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + *	Andrew F. Davis <afd@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65912 driver
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +
> +#include <linux/mfd/tps65086.h>
> +
> +static const struct mfd_cell tps65086_cells[] = {
> +	{ .name = "tps65086-regulator", },
> +	{ .name = "tps65086-gpio", },
> +};
> +
> +static const struct regmap_range tps65086_yes_ranges[] = {
> +	regmap_reg_range(TPS65086_IRQ, TPS65086_IRQ),
> +	regmap_reg_range(TPS65086_PMICSTAT, TPS65086_SHUTDNSRC),
> +	regmap_reg_range(TPS65086_GPOCTRL, TPS65086_GPOCTRL),
> +	regmap_reg_range(TPS65086_PG_STATUS1, TPS65086_OC_STATUS),
> +};
> +
> +static const struct regmap_access_table tps65086_volatile_table = {
> +	.yes_ranges = tps65086_yes_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(tps65086_yes_ranges),
> +};
> +
> +static const struct regmap_config tps65086_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.cache_type = REGCACHE_RBTREE,
> +	.volatile_table = &tps65086_volatile_table,
> +};
> +
> +static const struct regmap_irq tps65086_irqs[] = {
> +	REGMAP_IRQ_REG(TPS65086_IRQ_DIETEMP, 0, TPS65086_IRQ_DIETEMP_MASK),
> +	REGMAP_IRQ_REG(TPS65086_IRQ_SHUTDN, 0, TPS65086_IRQ_SHUTDN_MASK),
> +	REGMAP_IRQ_REG(TPS65086_IRQ_FAULT, 0, TPS65086_IRQ_FAULT_MASK),
> +};
> +
> +static struct regmap_irq_chip tps65086_irq_chip = {
> +	.name = "tps65086",
> +	.status_base = TPS65086_IRQ,
> +	.mask_base = TPS65086_IRQ_MASK,
> +	.ack_base = TPS65086_IRQ,
> +	.init_ack_masked = true,
> +	.num_regs = 1,
> +	.irqs = tps65086_irqs,
> +	.num_irqs = ARRAY_SIZE(tps65086_irqs),
> +};
> +
> +static const struct of_device_id tps65086_of_match_table[] = {
> +	{ .compatible = "ti,tps65086", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, tps65086_of_match_table);
> +
> +static int tps65086_probe(struct i2c_client *client,
> +			  const struct i2c_device_id *ids)
> +{
> +	struct tps65086 *tps;
> +	unsigned int version;
> +	int ret;
> +
> +	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
> +	if (!tps)
> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(client, tps);
> +	tps->dev = &client->dev;
> +	tps->irq = client->irq;
> +
> +	tps->regmap = devm_regmap_init_i2c(client, &tps65086_regmap_config);
> +	if (IS_ERR(tps->regmap)) {
> +		dev_err(tps->dev, "Failed to initialize register map\n");
> +		return PTR_ERR(tps->regmap);
> +	}
> +
> +	ret = regmap_read(tps->regmap, TPS65086_DEVICEID, &version);
> +	if (ret) {
> +		dev_err(tps->dev, "Failed to read revision register\n");
> +		return ret;
> +	}
> +
> +	dev_info(tps->dev, "Device: TPS65086%01lX, OTP: %c, Rev: %ld\n",
> +		 (version & TPS65086_DEVICEID_PART_MASK),
> +		 (char)((version & TPS65086_DEVICEID_OTP_MASK) >> 4) + 'A',
> +		 (version & TPS65086_DEVICEID_REV_MASK) >> 6);
> +
> +	ret = regmap_add_irq_chip(tps->regmap, tps->irq, IRQF_ONESHOT, 0,
> +				  &tps65086_irq_chip, &tps->irq_data);
> +	if (ret) {
> +		dev_err(tps->dev, "Failed to register IRQ chip\n");
> +		return ret;
> +	}
> +
> +	ret = mfd_add_devices(tps->dev, PLATFORM_DEVID_AUTO, tps65086_cells,
> +			      ARRAY_SIZE(tps65086_cells), NULL, 0,
> +			      regmap_irq_get_domain(tps->irq_data));
> +	if (ret) {
> +		regmap_del_irq_chip(tps->irq, tps->irq_data);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tps65086_remove(struct i2c_client *client)
> +{
> +	struct tps65086 *tps = i2c_get_clientdata(client);
> +
> +	regmap_del_irq_chip(tps->irq, tps->irq_data);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id tps65086_id_table[] = {
> +	{ "tps65086", 0 },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(i2c, tps65086_id_table);
> +
> +static struct i2c_driver tps65086_driver = {
> +	.driver		= {
> +		.name	= "tps65086",
> +		.of_match_table = tps65086_of_match_table,
> +	},
> +	.probe		= tps65086_probe,
> +	.remove		= tps65086_remove,
> +	.id_table       = tps65086_id_table,
> +};
> +module_i2c_driver(tps65086_driver);
> +
> +MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
> +MODULE_DESCRIPTION("TPS65086 PMIC Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/tps65086.h b/include/linux/mfd/tps65086.h
> new file mode 100644
> index 0000000..a228ae4
> --- /dev/null
> +++ b/include/linux/mfd/tps65086.h
> @@ -0,0 +1,117 @@
> +/*
> + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
> + *	Andrew F. Davis <afd@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether expressed or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License version 2 for more details.
> + *
> + * Based on the TPS65912 driver
> + */
> +
> +#ifndef __LINUX_MFD_TPS65086_H
> +#define __LINUX_MFD_TPS65086_H
> +
> +#include <linux/device.h>
> +#include <linux/regmap.h>
> +
> +/* List of registers for TPS65086 */
> +#define TPS65086_DEVICEID		0x01
> +#define TPS65086_IRQ			0x02
> +#define TPS65086_IRQ_MASK		0x03
> +#define TPS65086_PMICSTAT		0x04
> +#define TPS65086_SHUTDNSRC		0x05
> +#define TPS65086_BUCK1CTRL		0x20
> +#define TPS65086_BUCK2CTRL		0x21
> +#define TPS65086_BUCK3DECAY		0x22
> +#define TPS65086_BUCK3VID		0x23
> +#define TPS65086_BUCK3SLPCTRL		0x24
> +#define TPS65086_BUCK4CTRL		0x25
> +#define TPS65086_BUCK5CTRL		0x26
> +#define TPS65086_BUCK6CTRL		0x27
> +#define TPS65086_LDOA2CTRL		0x28
> +#define TPS65086_LDOA3CTRL		0x29
> +#define TPS65086_DISCHCTRL1		0x40
> +#define TPS65086_DISCHCTRL2		0x41
> +#define TPS65086_DISCHCTRL3		0x42
> +#define TPS65086_PG_DELAY1		0x43
> +#define TPS65086_FORCESHUTDN		0x91
> +#define TPS65086_BUCK1SLPCTRL		0x92
> +#define TPS65086_BUCK2SLPCTRL		0x93
> +#define TPS65086_BUCK4VID		0x94
> +#define TPS65086_BUCK4SLPVID		0x95
> +#define TPS65086_BUCK5VID		0x96
> +#define TPS65086_BUCK5SLPVID		0x97
> +#define TPS65086_BUCK6VID		0x98
> +#define TPS65086_BUCK6SLPVID		0x99
> +#define TPS65086_LDOA2VID		0x9A
> +#define TPS65086_LDOA3VID		0x9B
> +#define TPS65086_BUCK123CTRL		0x9C
> +#define TPS65086_PG_DELAY2		0x9D
> +#define TPS65086_PIN_EN_MASK1		0x9E
> +#define TPS65086_PIN_EN_MASK2		0x9F
> +#define TPS65086_SWVTT_EN		0x9F
> +#define TPS65086_PIN_EN_OVR1		0xA0
> +#define TPS65086_PIN_EN_OVR2		0xA1
> +#define TPS65086_GPOCTRL		0xA1
> +#define TPS65086_PWR_FAULT_MASK1	0xA2
> +#define TPS65086_PWR_FAULT_MASK2	0xA3
> +#define TPS65086_GPO1PG_CTRL1		0xA4
> +#define TPS65086_GPO1PG_CTRL2		0xA5
> +#define TPS65086_GPO4PG_CTRL1		0xA6
> +#define TPS65086_GPO4PG_CTRL2		0xA7
> +#define TPS65086_GPO2PG_CTRL1		0xA8
> +#define TPS65086_GPO2PG_CTRL2		0xA9
> +#define TPS65086_GPO3PG_CTRL1		0xAA
> +#define TPS65086_GPO3PG_CTRL2		0xAB
> +#define TPS65086_LDOA1CTRL		0xAE
> +#define TPS65086_PG_STATUS1		0xB0
> +#define TPS65086_PG_STATUS2		0xB1
> +#define TPS65086_PWR_FAULT_STATUS1	0xB2
> +#define TPS65086_PWR_FAULT_STATUS2	0xB3
> +#define TPS65086_TEMPCRIT		0xB4
> +#define TPS65086_TEMPHOT		0xB5
> +#define TPS65086_OC_STATUS		0xB6
> +
> +/* IRQ Register field definitions */
> +#define TPS65086_IRQ_DIETEMP_MASK	BIT(0)
> +#define TPS65086_IRQ_SHUTDN_MASK	BIT(3)
> +#define TPS65086_IRQ_FAULT_MASK		BIT(7)
> +
> +/* DEVICEID Register field definitions */
> +#define TPS65086_DEVICEID_PART_MASK	GENMASK(3, 0)
> +#define TPS65086_DEVICEID_OTP_MASK	GENMASK(5, 4)
> +#define TPS65086_DEVICEID_REV_MASK	GENMASK(7, 6)
> +
> +/* VID Masks */
> +#define BUCK_VID_MASK			GENMASK(7, 1)
> +#define VDOA1_VID_MASK			GENMASK(4, 1)
> +#define VDOA23_VID_MASK			GENMASK(3, 0)
> +
> +/* Define the TPS65086 IRQ numbers */
> +enum tps65086_irqs {
> +	TPS65086_IRQ_DIETEMP,
> +	TPS65086_IRQ_SHUTDN,
> +	TPS65086_IRQ_FAULT,
> +};
> +
> +/**
> + * struct tps65086 - state holder for the tps65086 driver
> + *
> + * Device data may be used to access the TPS65086 chip
> + */
> +struct tps65086 {
> +	struct device *dev;
> +	struct regmap *regmap;
> +
> +	/* IRQ Data */
> +	int irq;
> +	struct regmap_irq_chip_data *irq_data;
> +};
> +
> +#endif /* __LINUX_MFD_TPS65086_H */

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC

[Lee Jones]

On Tue, 26 Jan 2016, Andrew F. Davis wrote:

> On 01/26/2016 08:03 AM, Lee Jones wrote:
> >On Mon, 25 Jan 2016, Andrew F. Davis wrote:
> >
> >>Add support for the TPS65086 PMIC GPOs.
> >>
> >>TPS65086 has four configurable GPOs that can be used for several
> >>purposes. These are output only.
> >>
> >>Signed-off-by: Andrew F. Davis <afd-l0cyMroinI0@public.gmane.org>
> >>---
> >>  drivers/gpio/Kconfig         |   6 ++
> >>  drivers/gpio/Makefile        |   1 +
> >>  drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
> >>  3 files changed, 151 insertions(+)
> >>  create mode 100644 drivers/gpio/gpio-tps65086.c
> >
> >Is this patch orthogonal to the other two in the set, or do they all
> >need to go in together?
> 
> These can all go in separately, in fact Mark has already taken the regulator
> component from a previous push of this series. It is only the TPS65912
> driver I'm pushing that will need to go all at once due to conflicts with
> the driver it is replacing.

Very well.  MFD patches taken.

Linus should take this through his tree.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC

[Lee Jones]

On Tue, 26 Jan 2016, Andrew F. Davis wrote:

> On 01/26/2016 08:03 AM, Lee Jones wrote:
> >On Mon, 25 Jan 2016, Andrew F. Davis wrote:
> >
> >>Add support for the TPS65086 PMIC GPOs.
> >>
> >>TPS65086 has four configurable GPOs that can be used for several
> >>purposes. These are output only.
> >>
> >>Signed-off-by: Andrew F. Davis <afd@ti.com>
> >>---
> >>  drivers/gpio/Kconfig         |   6 ++
> >>  drivers/gpio/Makefile        |   1 +
> >>  drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
> >>  3 files changed, 151 insertions(+)
> >>  create mode 100644 drivers/gpio/gpio-tps65086.c
> >
> >Is this patch orthogonal to the other two in the set, or do they all
> >need to go in together?
> 
> These can all go in separately, in fact Mark has already taken the regulator
> component from a previous push of this series. It is only the TPS65912
> driver I'm pushing that will need to go all at once due to conflicts with
> the driver it is replacing.

Very well.  MFD patches taken.

Linus should take this through his tree.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC

[Linus Walleij]

On Mon, Jan 25, 2016 at 4:50 PM, Andrew F. Davis <afd@ti.com> wrote:

> Add support for the TPS65086 PMIC GPOs.
>
> TPS65086 has four configurable GPOs that can be used for several
> purposes. These are output only.
>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
(...)
> +static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
> +{
> +       return container_of(chip, struct tps65086_gpio, chip);
> +}

Remove this and use gpiochip_get_data() instead.

> +       ret = gpiochip_add(&gpio->chip);

And use gpiochip_add_data() to pass what gpiochip_get_data()
will return.

Apart from that no strong opinions.

If there is a header file dependency this either has to go to
Lee's tree with my ACK, or wait until the next kernel cycle.
But first change the above.

Yours,
Linus Walleij

Re: [PATCH v6 3/3] gpio: tps65086: Add GPO driver for the TPS65086 PMIC

[Andrew F. Davis]

On 02/05/2016 08:43 AM, Linus Walleij wrote:
> On Mon, Jan 25, 2016 at 4:50 PM, Andrew F. Davis <afd@ti.com> wrote:
>
>> Add support for the TPS65086 PMIC GPOs.
>>
>> TPS65086 has four configurable GPOs that can be used for several
>> purposes. These are output only.
>>
>> Signed-off-by: Andrew F. Davis <afd@ti.com>
> (...)
>> +static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
>> +{
>> +       return container_of(chip, struct tps65086_gpio, chip);
>> +}
>
> Remove this and use gpiochip_get_data() instead.
>
>> +       ret = gpiochip_add(&gpio->chip);
>
> And use gpiochip_add_data() to pass what gpiochip_get_data()
> will return.
>
> Apart from that no strong opinions.
>
> If there is a header file dependency this either has to go to
> Lee's tree with my ACK, or wait until the next kernel cycle.
> But first change the above.
>
> Yours,
> Linus Walleij
>

Changes made, I will resend this part as its own patch as the other components
have been taken.

Thanks,
Andrew