All of lore.kernel.org
 help / color / mirror / Atom feed
From: Karsten Malcher <debian@km.hopto.org>
To: linux-kernel@vger.kernel.org
Subject: Freezing system after kernel 3.2
Date: Mon, 08 Feb 2016 19:08:09 +0100	[thread overview]
Message-ID: <56B8D989.7090709@home.decotrain.de> (raw)

Hello,

i am sorry, but is it possible that a kernel bug for a special chipset is alive since kernel 3.2?

I have a backup PC with an Asrock ALiveXFire eSATA2 R3.0 mainboard with CPU AMD64 X2 6000+.
Before this mainboard runs very stable with Debian wheezy and kernel 3.2.0.
Now i tried to update to Jessie with kernel 3.16 and the board is crashing within 1-5 minutes after boot!

There is no clear error, mostly the system is just suddenly freezing without any message or log.
Sometimes i get a kernel panic like "fatal exception in interrupt", but the boot parameter "pc=nomsi" has no effect.

I can rule out hardware problems, because the memtest can run for many hours finding nothing.
Additionally i can boot Knoppix 6.7 with kernel 3.0.4 and it is running stable.
But when i boot Knoppix 7.2 with kernel 3.9.6 the system is freezing!
Aditionally i tried out kernel 4.3.0 in Debian but it does not help. Any newer kernel freezes.

I am sure that newer kernel have a problem with this special mainboard hardware.

lspci shows:

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
02:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 3600 Series
02:00.1 Audio device: ATI Technologies Inc RV635 Audio device [Radeon HD 3600 Series]

My hope is that there are known problems with parts of this mainboard hardware?

Best regards
Karsten

             reply	other threads:[~2016-02-08 18:24 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-08 18:08 Karsten Malcher [this message]
2016-02-09  3:51 ` Freezing system after kernel 3.2 Ken Moffat
2016-02-09 10:42   ` Karsten Malcher
2016-02-09 16:03   ` Karsten Malcher
     [not found]     ` <20160209194217.GA16581@milliways>
2016-02-10 15:12       ` Karsten Malcher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56B8D989.7090709@home.decotrain.de \
    --to=debian@km.hopto.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.