From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Fri, 12 Feb 2016 13:00:25 +0100 Subject: [U-Boot] Problem with mounting a jffs2 partition on flash. In-Reply-To: References: <201602081712.21810.marex@denx.de> <201602091830.32950.marex@denx.de> <56BB625E.1040207@denx.de> <56BC76E4.6040209@denx.de> <56BC8457.5010702@denx.de> <56BCA12F.1010308@denx.de> <56BCACA2.1080109@denx.de> Message-ID: <56BDC959.7080808@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 02/12/2016 09:44 AM, Bakhvalov, Denis (Nokia - PL/Wroclaw) wrote: > Hi Marek, Hi Denis, > I tried mainline U-boot with your patches as well as socfpga branch. > Still no success. Did you try the image I sent you ? That one is tested to work on AV SoCDK. > There is no output on the console. > Once again when I'm uploading old version of U-boot and preloader (from 2013) at least I can see the output on the console. > > What could be the next step? Press the "WARM RESET" button of the HPS (located top-right, if you have the board oriented with HPS ethernet on the top-left). Do you see any console output then ? You do use the top-right miniUSB port for console, right ?