From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Fri, 12 Feb 2016 16:09:21 +0100 Subject: [U-Boot] Problem with mounting a jffs2 partition on flash. In-Reply-To: References: <201602081712.21810.marex@denx.de> <201602091830.32950.marex@denx.de> <56BB625E.1040207@denx.de> <56BC76E4.6040209@denx.de> <56BC8457.5010702@denx.de> <56BCA12F.1010308@denx.de> <56BCACA2.1080109@denx.de> <56BDC959.7080808@denx.de> Message-ID: <56BDF5A1.2070609@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 02/12/2016 03:00 PM, Bakhvalov, Denis (Nokia - PL/Wroclaw) wrote: > Hi Marek, Hi Denis, >>> Press the "WARM RESET" button of the HPS (located top-right, if you have >>> the board oriented with HPS ethernet on the top-left). Do you >>> see any console output then ? You do use the top-right miniUSB port >>> for console, right ? >> >> Currently board is integrated in RF unit. I will put off the cover and press it. > > I took off the cover and: > 1. We don't have socfpga dev kit. There is only fpga itself. > Sorry for that, but I haven't ever opened the unit before. Oh, so this is a custom board. Do you use stock av_socdk configuration of the u-boot provided by Altera or did you do some modifications to it? That'd probably explain why it works for you. > I assume that the main board is produced by Nokia. > 2. Maybe this is the problem, that we are targeting socfpga Dev Kit? > 3. I can send you some photos to check. That's fine, just check if you did some modifications to the altera fork of u-boot. Especially interesting would be PLL/pinmux/DRAM config. Cheers!