From mboxrd@z Thu Jan  1 00:00:00 1970
From: Derald D. Woods <woods.technical@gmail.com>
Date: Mon, 15 Feb 2016 17:03:22 -0600
Subject: [U-Boot] [PATCH] OMAP3: am3517_evm: SD/MMC boot with uEnv.txt,
 zImage, and FDT
In-Reply-To: <56C2573D.4040703@gmail.com>
References: <1454900087-31977-1-git-send-email-woods.technical@gmail.com>
 <20160208204533.GO25786@bill-the-cat> <56C2573D.4040703@gmail.com>
Message-ID: <56C2593A.5020309@gmail.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 02/15/2016 04:54 PM, Derald D. Woods wrote:
> On 02/08/2016 02:45 PM, Tom Rini wrote:
>> On Sun, Feb 07, 2016 at 08:54:47PM -0600, Derald D. Woods wrote:
>>
>>> Boot with the Linux zImage and am3517-evm.dtb pair, when SD/MMC media
>>> is present. This behavior can be overridden by creating a 'uEnv.txt'
>>> file with 'uenvcmd' defined.
>>>
>>> To boot an existing 'uImage', create the following 'uEnv.txt':
>>>
>>> [start]----------------------------------------------------------------- 
>>>
>>>
>>> loaduimage=fatload mmc 0:1 ${loadaddr} ${bootfile}
>>> uenvcmd=run loaduimage; run mmcargs; bootm ${loadaddr}
>>>
>>> [end]------------------------------------------------------------------- 
>>>
>>>
>>> Inspired by similar patches, for other OMAP3 boards, from EEWiki
>>> - https://github.com/eewiki/u-boot-patches/tree/master/v2016.01
>>>
>>> Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
>> Reviewed-by: Tom Rini <trini@konsulko.com>
>>
>
> Gentle nudge.
>
> I know that there is not much support for this board and its variants. 
> That being said, one can still buy the SOM's at Digi-Key and other 
> outlets. The Zoom AM3517 eXperimenter, which I have, is still a decent 
> platform for development. So for those who may still care, it would be 
> good to keep this updated.
>
> Derald

I just missed seeing your application to master. Thanks!