Re: [PATCH v3 00/17] stmmac: enhance driver performances and update the version

[Giuseppe CAVALLARO <peppe.cavallaro@st.com>]

Hello Lars

On 3/1/2016 10:15 AM, Lars Persson wrote:
> Hi Peppe
>
> We look forward to seeing the patches for 4.10a support. I hope that we
> can work together to have one driver supporting all chips with the 4.x
> GMACs.

many thanks for your prompt feedback. So we will proceed to provide
the gmac4 patches on top of this subset for net-next branch.
For sure, we will work together to have the best solution for these
chips.

Regards
Peppe

>
> - Lars
>
>
> On 02/29/2016 05:50 PM, Giuseppe CAVALLARO wrote:
>> Gents
>>
>> on top of these patches, there is a new train to enhance the stmmac to
>> support the DWMAC_4.x chips. They will be proposed very soon and on
>> top of this update (as soon as reviewed and merged).
>>
>> In our context, it has been very useful working with the same driver
>> that runs fine on several (x86, arm, sh4) boxes with different SYNP
>> MAC/GMAC IPs (starting from MAC10/100 Database Release 1.5 to databook
>> 3.70a and .... 4.00a and 4.10a). We got the benefit to have all the
>> features already supported by stmmac plus the good performances
>> available with TSO on gmac4.
>>
>> I can image no big issues to enhance the stmmac on supporting the
>> new 4.00a and 4.10a although there is some other work made by
>> Rabin and Larper.
>>
>> I guess, stmmac users will continue to be happy to continue to have the
>> same d.d. working on their platforms with new gmac.
>> But! it also makes sense to avoid to have two drivers that aim
>> to do the same job. Or to get more synergy on the same code as
>> done in the past with Rayagond for PTP and EEE.
>>
>> If you have some concern or advice, please do not hesitate to ask.
>> We will try to send the patches soon to show the code in case of
>> people are interested in.
>>
>> Kind Regards
>> Peppe
>>
>> On 2/29/2016 2:27 PM, Alexandre TORGUE wrote:
>>> According to Giuseppe, I send the v3 series.
>>>
>>> This is a subset of patches to rework the driver in order to improve its
>>> performances and make it more robust under stress conditions.
>>>
>>> All patches have been ported on STi mainstream kernel branch and
>>> tested on ARM STiH4xx platforms and newer ones.
>>>
>>> This series also updates the driver version and prepares it
>>> to include further development to support new chips.
>>>
>>> In detail, these patches are:
>>>
>>> o to rework and improve the internal DMA bus settings
>>>
>>>    Fine tuning is mandatory on some platforms for both
>>>    performance and stability issues.
>>>
>>> o to rework and optimize the descriptor management.
>>>
>>>    This will help a lot on performance side and preparing
>>>    the inclusion on the GMAC4.x.
>>>
>>> o to add a set of optimizations for both xmit and rx functions.
>>>
>>>    These will help a lot on performance side and making the driver
>>>    more robust in case of low memory conditions and under some
>>>    stress test, performed for example on IP-STB.
>>>
>>> Below some throughput figures obtained on some boxes before and after
>>> the patches.
>>>
>>>                         nuttcp (mbps)       iperf (Mbps)
>>> ------------------------------------------------------------------
>>>                        tcp     udp          tcp      udp
>>>                     tx   rx   tx  rx      tx   rx   tx  rx
>>>                      ------------------------------------------
>>>     old             680   800 480  506    760  800   600  700
>>>     new             830   880 540  630    840  880   700   800
>>>
>>> ==============================================================================
>>>
>>>
>>>
>>> V2: - rx_copybreak is now managed by using ethtool.
>>> V3: - improve comments on PCIe detailing that there are no regressions
>>>      - rework some APIs to properly define some params as bool as
>>> expected
>>>      - rework the formula to get the element inside the ring.
>>> Comparing V2,
>>>     patches 4 and 13 have been merged because the same formula have been
>>>     used. After this rework, no evident benefit has been noticed in
>>> terms
>>>     of performances so the table above is still valid. Disassembling the
>>>     code for SH4 and ARM, with the new formula just an instr is saved
>>>     (depending on compiler flags) and this gives us not so relevanti
>>> gain,
>>>     for example, on SH4 where some instr are executed in the same
>>> pipeline
>>>     stage.
>>>     Ring sizes are now fixed and maybe they can be reworked to be tuned
>>>     w/o using stmmaceth= cmdline option. Indeed, nobody change these
>>> sizes
>>>     and indeed the numbers selected by default respect the budget and
>>>     avoid to pass invalid setup. These are the best driver default sizes
>>>     for ring and chain.
>>>
>>> ==============================================================================
>>>
>>>
>>> Fabrice Gasnier (3):
>>>    stmmac: merge get_rx_owner into rx_status routine.
>>>    stmmac: optimize tx clean function
>>>    stmmac: fix phy init when attached to a phy
>>>
>>> Giuseppe Cavallaro (14):
>>>    stmmac: share reset function between dwmac100 and dwmac1000
>>>    stmmac: rework DMA bus setting and introduce new platform AXI
>>>      structure
>>>    stmmac: change descriptor layout
>>>    stmmac: review RX/TX ring management
>>>    stmmac: add length field to dma data
>>>    stmmac: add last_segment field to dma data
>>>    stmmac: add is_jumbo field to dma data
>>>    stmmac: optimize tx desc management
>>>    stmmac: set dirty index out of the loop
>>>    stmmac: first frame prep at the end of xmit routine
>>>    stmmac: do not poll phy handler when attach a switch
>>>    stmmac: do not perform zero-copy for rx frames
>>>    stmmac: tune rx copy via threshold.
>>>    stmmac: update version to Oct_2015
>>>
>>>   Documentation/devicetree/bindings/net/stmmac.txt   |  54 ++-
>>>   drivers/net/ethernet/stmicro/stmmac/chain_mode.c   |  37 +-
>>>   drivers/net/ethernet/stmicro/stmmac/common.h       |  39 +-
>>>   drivers/net/ethernet/stmicro/stmmac/descs.h        | 330
>>> +++++++-------
>>>   drivers/net/ethernet/stmicro/stmmac/descs_com.h    |  77 ++--
>>>   drivers/net/ethernet/stmicro/stmmac/dwmac100.h     |   1 -
>>>   drivers/net/ethernet/stmicro/stmmac/dwmac1000.h    |   3 +-
>>>   .../net/ethernet/stmicro/stmmac/dwmac1000_dma.c    | 111 +++--
>>>   drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c |  22 +-
>>>   drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h    |  39 +-
>>>   drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c    |  21 +
>>>   drivers/net/ethernet/stmicro/stmmac/enh_desc.c     | 226 +++++-----
>>>   drivers/net/ethernet/stmicro/stmmac/norm_desc.c    | 150 ++++---
>>>   drivers/net/ethernet/stmicro/stmmac/ring_mode.c    |  32 +-
>>>   drivers/net/ethernet/stmicro/stmmac/stmmac.h       |   9 +-
>>>   .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c   |  41 +-
>>>   drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  | 473
>>> ++++++++++++---------
>>>   drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c   |   4 +-
>>>   .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |  42 +-
>>>   include/linux/stmmac.h                             |  17 +-
>>>   20 files changed, 1016 insertions(+), 712 deletions(-)
>>>
>>
>
>